Hostname: page-component-5b777bbd6c-7mr9c Total loading time: 0 Render date: 2025-06-20T19:11:12.771Z Has data issue: false hasContentIssue false
  • English
  • Français

Design of parameters of parallel manipulators for a specified workspace

Published online by Cambridge University Press:  08 October 2003

Anna Kosinska ,
Miroslaw Galicki  and
Krzysztof Kedzior
Anna Kosinska
Affiliation:
Warsaw University of Technology, Institute of Aeronautics and Applied Mechanics, ul.Nowowiejska 24, 00-665 Warsaw (Poland)
Miroslaw Galicki
Affiliation:
Technical University of Zielona Gora, Department of Organisation and Management, ul.Podgorna 50, 65-246 Zielona Gora (Poland)
Krzysztof Kedzior
Affiliation:
Warsaw University of Technology, Institute of Aeronautics and Applied Mechanics, ul.Nowowiejska 24, 00-665 Warsaw (Poland)
Get access Rights & Permissions [Opens in a new window]

Summary

In this paper an algorithm for designing spatial parallel manipulator parameters for a given workspace has been presented. At the beginning, architecture has been chosen that describes a general parallel manipulator. The manipulator may possess any number of limbs, consisting of links connected by spherical, revolute or linear joints as well as actuators. The parameters, which will be determined, are the lengths of the links of kinematic chains, the coordinates of the fixing points of the chains to the platform and the base, and orientations of the revolute engines axes situated at the base. The workspace may be specified in the form of any shape in the space containing a set of points of known coordinates and the limits in which the geometrical parameters may vary. The algorithm does not determine the exact values of the parameters, but only their functions. It leads to the necessity for further research in order to optimise the solutions.

Keywords

Parallel manipulatorsKinematicsWorkspaceDesigning
Type
Research Article
Information
Robotica , Volume 21 , Issue 5 , October 2003 , pp. 575 - 579
Copyright
Copyright © Cambridge University Press 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Kosinska, A. and Morecki, A., “Designing of parameters of Delta-4 manipulator for a workspace specified as a set of points (in Polish)”, XVII Polish National Conference on TMM, Warsaw-Jachranka (2000) pp. 271–276.Google Scholar
2. Kosinska, A. and Morecki, A., “Planar parallel manipulator 3(RRR), designing of parameters for a specified trajectory (in Polish)”, The 7th National Conference on Robotics, Ladek Zdroj, Poland (2001) pp. 75–80.Google Scholar
3. Merlet, J.P., “Designing a parallel manipulator for a specific workspace”, Rapport de recherché No. 2527 (April, 1995).CrossRefGoogle Scholar
4. Patarinski, S.P. and Uchiyama, M., “Analysis and Design of Position/Orientation Decoupled Parallel Manipulators”, The 10th ClSM-IFToMM Symposium (1994) pp. 219–224.Google Scholar
5. Morecki, A. and Knapczyk, J., Basic of Robotics. Theory and element of manipulators and robots (in Polish) (WNT, Warsaw, 1999).Google Scholar