Hostname: page-component-6766d58669-h8lrw Total loading time: 0 Render date: 2026-05-21T04:09:14.833Z Has data issue: false hasContentIssue false
  • English
  • Français

Automated assembly by reference measurement

Published online by Cambridge University Press:  09 March 2009

C. Francois  and
F. Artigue
C. Francois
Affiliation:
Limro-I.U.T. de Cachan., Université de Paris-Sud, 9, Avenue de La Division Leclere, 94230-Cachan (France)
F. Artigue
Affiliation:
Limro-I.U.T. de Cachan., Université de Paris-Sud, 9, Avenue de La Division Leclere, 94230-Cachan (France)
Get access Rights & Permissions [Opens in a new window]

Abstract

SUMMARY

This paper describes an automatic assembly method by reference searching followed by workpiece repositioning. In such a case, the adjustment of the piece to be assembled to its relative location is obtained before the final insertion phase.

The efficiency of the method is shown in the case of the automatic fitting of a car suspension triangle. The main elements of the prototype designed for this task are described and their principles are developed. Considerations regarding less specific devices lead to a possible improvement of the flexibility of the assembly method.

Information

Type
Article
Information
Robotica , Volume 2 , Issue 4 , October 1984 , pp. 197 - 201
Copyright
Copyright © Cambridge University Press 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1.Whitney, D.E. and Nevins, J.L., “What is the Remote Center Compliance and what can it do?” Proceedings of the 9th International Symposium on Industrial Robots, Washington (03, 1979) pp. 135–152.Google Scholar
2.Lane, J.D., “Evaluation of a Remote Center Compliance Device for Assembly Application” Proceedings of the 1st International Conference on Assembly Automation, Brighton (03, 1980) pp. 443–472.Google Scholar
3.Drake, S., Watson, P. and Simunovic, S., “High speed Robot Assembly of Precision Parts Using Compliance Instead of Sensory Feedback” Proceedings of the 7th International Symposium on Industrial Robots Tokyo (10, 1977) pp. 87–98.Google Scholar
4.Hill, J.W., “Force Controlled Assembler” Industrial Robots Vol. 2. Applications (Tanner, W.R., ed.) (ASME Publ., Dearborn, Michigan, 1981), pp. 474–478.Google Scholar
5.Seltzer, D.S., “Use of the Sensory Information for Improved Robot Learning” Industrial Robots vol. 1. Fundamentals (Tanner, W.R., ed.) (ASME Publ. Dearborn, Michigan, 1981), pp. 424–434.Google Scholar
6.van Brussel, H. and Simons, J., “A Self-Learning Robot for Automatic Assembly” Proceedings of the International Conference on Assembly Automation Brighton, U.K. (03, 1980) pp. 295–308.Google Scholar