Hostname: page-component-76fb5796d-9pm4c Total loading time: 0 Render date: 2024-04-29T14:16:48.746Z Has data issue: false hasContentIssue false
  • English
  • Français

Combined flexural-joint stiffness matrix and the elastic deformation of a servo-controlled two-link robot manipulator

Published online by Cambridge University Press:  09 March 2009

M. Shahinpoor  and
A. Meghdari
M. Shahinpoor
Affiliation:
Department of Mechanical Engineering, University of New Mexico, Albuquerque, New Mexico 87131 (USA)
A. Meghdari
Affiliation:
Department of Mechanical Engineering, University of New Mexico, Albuquerque, New Mexico 87131 (USA)
Get access Rights & Permissions [Opens in a new window]

Abstract

SUMMARY

An expression is derived for the combined flexural-joint stiffness matrix and the elastic deformation field of a servo-controlled two-link robot manipulator. Such expressions are needed in dealing with light weight high-speed flexible robot manipulators. The approach employs a strain energy invariance principle with respect to the elemental and the system reference coordinate frames to derive the desired 9 × 9 combined flexural joint stiffness matrix.

Type
Articles
Information
Robotica , Volume 4 , Issue 4 , October 1986 , pp. 237 - 242
Copyright
Copyright © Cambridge University Press 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Book, J.W., “Modeling, Design and Control of Flexible Manipulator Arms” Ph.D. Thesis, Department of Mechanical Engineering, MIT (1974).Google Scholar
2.Maizza-Neto, O., “Modal Analysis and Control of Flexible Manipulator Arms” Ph.D. Thesis, Department of Mechanical Engineering, MIT (1974).Google Scholar
3.Book, W.J., Maizza-Neto, O. and Whitney, D.E., “Feedback Control of Two Beam, Two Joint Systems with Distributed Flexibility” Trans. ASME, J. Dyn. Syst. Measurement and Control 97, No. 4, 424–431 (1975).Google Scholar
4.Hughes, P.C., “Dynamics of a Flexible Arm for the Space Shuttle” 1977 AAS/AIAA Astrodynamics Conference, Jackson Lake Lodge, Wyoming (09, 1977).Google Scholar
5.Beazley, W.G., “The Small Motion Dynamics of Bilaterally Coupled Kinematics Chains with Flexible Links” Ph.D. Thesis, The University of Texas at Austin, Department of Mechanical Engineering (08 1978).Google Scholar
6.Book, W.J., “Analysis of Massless Elastic Chains with Servo Controlled Joints” Trans. ASME, J. Dyn. Syst. Measurement and Control 101, No. 3, 187–192 (1979).Google Scholar
7.Book, W.J. and Majette, M., “Controller Design for Flexible Distributed Parameter Mechanical Arms Via Combined State Space and Frequency Domain Techniques” Trans. ASME, J. Dyn. Syst. Measurement and Control 105, No. 4, 245–254 (1983).Google Scholar
8.Campbell, D., “An Iterative Algorithm for the Inverse Kinematics Solution of a General n−axis Robot Manipulator Using Powell's Optimization Technique” M.Sc. Thesis, Department of Mechanical Engineering, Clarkson University (08 1984).Google Scholar
9.Pestel, E. and Leckie, A., Matrix Methods in Elastomechanics (McGraw-Hill Book Company, New York, 1963).Google Scholar
10.Kanchi, M.B., Matrix Methods in Structural Analysis (Wiley Eastern Ltd. Company, New York, 1981).Google Scholar
11.Turner, N.J., Clough, R., Martin, H.C., and Topp, L.J., “Stiffness and Deflection Analysis of Complex Structures” J. Aero. Sci. 23, 805–823 (1956).Google Scholar