Skip to main content
×
Home
    • Aa
    • Aa

A shape memory alloy-based tendon-driven actuation system for biomimetic artificial fingers, part I: design and evaluation

  • Vishalini Bundhoo (a1), Edmund Haslam (a1), Benjamin Birch (a1) and Edward J. Park (a1)
Abstract
SUMMARY

In this paper, a new biomimetic tendon-driven actuation system for prosthetic and wearable robotic hand applications is presented. It is based on the combination of compliant tendon cables and one-way shape memory alloy (SMA) wires that form a set of agonist–antagonist artificial muscle pairs for the required flexion/extension or abduction/adduction of the finger joints. The performance of the proposed actuation system is demonstrated using a 4 degree-of-freedom (three active and one passive) artificial finger testbed, also developed based on a biomimetic design approach. A microcontroller-based pulse-width-modulated proportional-derivation (PWM-PD) feedback controller and a minimum jerk trajectory feedforward controller are implemented and tested in an ad hoc fashion to evaluate the performance of the finger system in emulating natural joint motions. Part II describes the dynamic modeling of the above nonlinear system, and the model-based controller design.

Copyright
Corresponding author
*Corresponding author. E-mail: ejpark@me.uvica@ca
Linked references
Hide All

This list contains references from the content that can be linked to their source. For a full set of references and notes please see the PDF or HTML where available.

1.H. H. Kwee , “Rehabilitation robotics—Softening the hardware,” IEEE Eng. Med. Biol. Mag. 14 (3), 330335 (1995).

2.G. Bolmsjo , H. Neveryd and H. Eftring , “Robotics in rehabilitation,” IEEE Trans. Rehabil. Eng. 3 (1), 7783 (1995).

3.N. Tejima , “Rehabilitation robotics: A review,” Adv. Robot. 14 (7), 551564 (2000).

4.D. Stefanov and Z. Z. Bien , “Advances in human-friendly robotic technologies for movement assistance/movement restoration for people with disabilities,” In: Advances in Rehabilitation Robotics (Z. Z. Bien and D. Stefanov , eds.) (Springer, Berlin, 2004) pp. 323.

5.D. Popovic and T. Sinkjar , Control of Movement for the Physically Disabled (Springer, London, 2000).

8.J. L. Pons , R. Ceres and F. Pfeiffer , “Multifingered dexterous robotic hand design and control: A review,” Robotica 17, 661674 (1999).

9.L. Lin and H. Huang , “NTU hand: A new design of dexterous hands,” Trans. ASME, J. Mech. Des. 120, 282292 (1998).

13.C. Liang and C. A. Rogers , “Design of shape memory alloy actuator,” Trans. ASME, J. Mech. Des. 114, 223230 (1992).

15.C. P. Chou , “Measurement and modeling of McKibbon pneumatic artificial muscles,” IEEE Trans. Robot. Autom. 12, 90103 (1996).

16.F. El Feninat , G. Laroche , M. Fiset and D. Mantovani , “Shape memory materials for biomedical applications,” Adv. Eng. Mater. 4, 91104 (2002).

19.A. D. Price , A. Jnifene and H. E. Naguib , “Design and control of a shape memory alloy based dexterous robot hand,” Smart Mater. Struct. 16, 14011414 (2007).

22.B. Buchholz , A. Armstrong and S. A. Goldstein , “Anthropometric data for describing the kinematics of the human hand,” Ergonomics 35 (3), 261273 (1992).

25.L. K. Simone and D. G. Kamper , “Design considerations for a wearable monitor to measure finger posture,” J. NeuroEng. Rehabil. 2 (5), 110 (2005).

26.D. J. Beebe , D. D. Denton , R. G. Radwin and J. G. Webster , “A silicon-based tactile sensor for finger-mounted applications,” IEEE Trans. Biomed. Eng. 45 (2), 151159 (1998).

27.J. Engel , J. Chen , Z. Fan and C. Liu , “Polymer micromachined multimodal tactile sensors,” Sensors Actuators A 117, 5061 (2005).

28.J. Carpaneto , S. Micera , F. Zaccone , F. Vecchi and P. Dario , “A sensorized thumb for force closed-loop control of hand neuroprostheses,” IEEE Trans. Neural Syst. Rehabil. Eng. 11 (4), 346353 (2003).

31.M. Elahania and H. Ashrafoun , “Nonlinear control of a shape memory alloy actuated manipulator,” Trans. ASME. J. Vib. Acoust. 124, 566575 (2002).

32.J. I. Arocena and R. W. Daniel , “Design and control of a novel 3-DOF flexible robot, part 1: Design and evaluation,” Int. J. Robot. Res. 17, 11671181 (1998).

33.N. Ma and G. Song , “Control of shape memory actuator using pulse width modulation,” Smart Mater. Struct. 12, 712719 (2003).

Recommend this journal

Email your librarian or administrator to recommend adding this journal to your organisation's collection.

Robotica
  • ISSN: 0263-5747
  • EISSN: 1469-8668
  • URL: /core/journals/robotica
Please enter your name
Please enter a valid email address
Who would you like to send this to? *
×

Keywords: