Hostname: page-component-76fb5796d-r6qrq Total loading time: 0 Render date: 2024-04-26T20:19:24.735Z Has data issue: false hasContentIssue false
  • English
  • Français

On-line polynomial path planning in Cartesian space for robot manipulators

Published online by Cambridge University Press:  09 March 2009

Cyrille Froissart  and
Pierre Mechler†
Get access Rights & Permissions [Opens in a new window]

Summary

A method is presented to perform path planning in the Cartesian space. The motion velocity and acceleration are continuous. This is the first polynomial path planning algorithm in the Cartesian space working in real-time; it does not need an advanced knowledge of the trajectory and can be used when knot points are provided on-line by a sensor. The Bézier representation is used to compute a fifth degree polynomial path. It has been tested on an industrial robot controller.

Keywords

Path planningCartesian spaceBezier repre-sentationRobots.
Type
Research Article
Information
Robotica , Volume 11 , Issue 3 , May 1993 , pp. 245 - 251
Copyright
Copyright © Cambridge University Press 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.R., Paul, “Manipulator Cartesian Path Control” IEEE Trans, on Systems, Man, and Cybernetics SMC–9, No. 11, 702–711 (11., 1979).Google Scholar
2.Chand, S. and Doty, K.L. “On-Line Polynomial Traject ories for Robot Manipulators” Int. J. Robotics Research 4, No. 2, 38–48 (Summer 1985).Google Scholar
3.Stewart, N.F. “On-line robotic trajectory control based on spline interpolation” INFOR 23, No. 2, 159–169 (05, 1985).Google Scholar
4.Castain, R. H. and Paul, R.P. “An On-Line Dynamic Trajectory Generator” Int. J. Robotics Research 3, No. 1, 68 (1984).Google Scholar
5.Van Aken, I.L. and Brussel, H. V. “On-line robot trajectory control in joint coordinates by means of imposed acceleration profiles” Robotica 6, part 3, 185–195 (1988).Google Scholar
6.Froissart, C. “Génération adaptative de mouvement pour processus continus; Application au suivi de joint” Thèse de I'Universite Pierre et Marie Curie, Spécialite Mecanique/Robotique, Laboratoire de Robotique de Paris (12, 1991).Google Scholar
7.Funda, J. x0026; Paul, R.P. “A comparison of transforms and quaternions in robotics” IEEE Int. Conf. on Robotics and Automation 2, (1988) pp. 886–891.Google Scholar
8.Bézier, P.Courbes et surfaces Mathimatiques et CAO 4 (Hermès, Paris, 1986) pp. 67–115.Google Scholar
9.Edwall, C.W., Ho, C.Y. and Pottinger, H.J. “Trajectory Generation And Control Of A Robot Arm Using Spline Functions” Technical Paper, Society of Manufacturing Engineers (1982).Google Scholar
10.Lin, C.S., Chang, P.R. x0026; Luh, J.Y.S. “Formulation and Optimization of Cubic Polynomial Joint Trajectories For. Industrial Robots” IEEE Trans, on Automatic Control AC-28, No. 12, 1066–1073 (12, 1983).CrossRefGoogle Scholar
11.Luh, J.Y.S. and Lin, C.S. “Approximate Joint Trajectories For Control of Industrial Robots Along Cartesian Path” IEEE Trans, on Systems, Man, and Cybernetics SMC-14, No. 3, 444–456 (05/06, 1984).Google Scholar