Skip to main content
×
×
Home

Planning to fold multiple objects from a single self-folding sheet

  • Byoungkwon An (a1), Nadia Benbernou (a1), Erik D. Demaine (a1) and Daniela Rus (a1)
Summary

This paper considers planning and control algorithms that enable a programmable sheet to realize different shapes by autonomous folding. Prior work on self-reconfiguring machines has considered modular systems in which independent units coordinate with their neighbors to realize a desired shape. A key limitation in these prior systems is the typically many operations to make and break connections with neighbors, which lead to brittle performance. We seek to mitigate these difficulties through the unique concept of self-folding origami with a universal fixed set of hinges. This approach exploits a single sheet composed of interconnected triangular sections. The sheet is able to fold into a set of predetermined shapes using embedded actuation.

We describe the planning algorithms underlying these self-folding sheets, forming a new family of reconfigurable robots that fold themselves into origami by actuating edges to fold by desired angles at desired times. Given a flat sheet, the set of hinges, and a desired folded state for the sheet, the algorithms (1) plan a continuous folding motion into the desired state, (2) discretize this motion into a practicable sequence of phases, (3) overlay these patterns and factor the steps into a minimum set of groups, and (4) automatically plan the location of actuators and threads on the sheet for implementing the shape-formation control.

Copyright
Corresponding author
*Corresponding author. E-mail: edemaine@mit.edu
References
Hide All
1.An, B., “Em-Cube: Cube-Shaped, Self-Reconfigurable Robots Sliding on Structure Surfaces,” Proceedings of the IEEE International Conference on Robotics and Automation, New York (May 2008) pp. 31493155.
2.Aspvall, B., Plass, M. F. and Tarjan, R. E., “A linear-time algorithm for testing the truth of certain quantified boolean formulas,” Inf. Process. Lett. 8 (3), 121123 (1979).
3.Balkcom, D., Robotic Origami Folding PhD Thesis (Pittsburgh, PA: Robotics Institute, Carnegie Mellon University, Aug. 2004).
4.Benbernou, N., Demaine, E. D., Demaine, M. L. and Ovadya, A., “A universal crease pattern for folding orthogonal shapes,” arXiv:0909.5388 (Sep. 2009). http://arXiv.org/abs/0909.5388.
5.Butler, Z., Fitch, R. and Rus, D., “Distributed control for unit-compressible robots: Goal-recogition, locomotion and splitting,” IEEE/ASME Trans. Mechatronics 7 (4), 418–30 (2002).
6.Butler, Z., Kotay, K., Rus, D. and Tomita, K., “Generic decentralized control for lattice-based self-reconfigurable robots,” Int. J. Robot. Res. 23 (9), 919937 (2004).
7.Balkcom, D. J. and Mason, M. T., “Introducing Robotic Origami Folding,” IEEE International Conference on Robotics and Automation (2004), pp. 3245–3250.
8.Balkcom, D. and Mason, M., “Robotic origami folding,” Int. J. Robot. Res. 27 (5), 613627 (May 2008).
9.Butler, Z. J. and Rus, D., “Distributed planning and control for modular robots with unit-compressible modules,” Int. J. Robot. Res. 22 (9), 699716 (2003).
10.Chiang, C.-H. and Chirikjian, G., “Modular robot motion planning using similarity metrics,” Auton. Robots 10 (1), 91106 (2001).
11.Cantarella, J. H., Demaine, E. D., Iben, H. N. and O'Brien, J. F., “An Energy-Driven Approach to Linkage Unfolding,” Proceedings of the 20th Annual ACM Symposium on Computational Geometry Brooklyn, New York (June 2004) pp. 134143.
12.Díaz-Báñez, J. M. and Mesa, J. A., “Fitting rectilinear polygonal curves to a set of points in the plane,” Eur. J. Oper. Res. 130 (1), 214222 (2001).
13.Dai, J. S. and Caldwell, D. G., “Origami-based robotic paper-and-board packaging for food industry,” Trends Food Sci. Technol. 21 (3), 153157 (2010).
14.Demaine, E. D., Devadoss, S. L., Mitchell, J. S. B. and O'Rourke, J., “Continuous Foldability of Polygonal Paper,” Proceedings of the 16th Canadian Conference on Computational Geometry Montréal, Canada (Aug. 2004), pp. 6467.
15.Downey, R. G. and Fellows, M. R., Parameterized Complexity (Springer-Verlag, New York 1999).
16.Demaine, E. D. and O'Rourke, J., Geometric Folding Algorithms: Linkages, Origami, Polyhedra, (Cambridge University Press, Cambridge, July 2007).
17.Detweiler, C., Vona, M., Yoon, Y., Yun, S. and Rus, D., “Self-assembling mobile linkages with active and passive modules,” IEEE Robot. Autom. Mag. 14 (4), 4555 (2007).
18.Fukuda, T. and Kawakuchi, Y., “Cellular robotic system (CEBOT) as one of the realization of self-organizing intelligent universal manipulator,” Proceedings of IEEE International Conference on Robotics and Automation (1990) pp. 662–667.
19.Gilpin, K., Kotay, K., Rus, D. and Vasilescu, I., “Miche: Modular shape formation by self-disassembly,” Int. J. Robot. Res. 27 (3–4), 345372 (2008).
20.Gilpin, K., Kotay, K., Rus, D. and Vasilescu, I., “Miche: Self-assembly by self-disassembly,” Int. J. Robot. Res. 27 (3–4), 345372 (2008).
21.Hawkes, E., An, B. K., Benbernou, N. M., Tanaka, H., Kim, S., Demaine, E. D., Rus, D. and Wood, R. J., “Programmable matter by folding,” Proc. Natl. Acad. Sci. U. S. A. 107 (28), 1244112445 (2010).
22.White, P. J., Kopanski, K. and Lipson, H., “Stochastic self-reconfigurable cellular robotics,” Proceedings of the IEEE International Conference on Robotics and Automation, New Orleans, LA (May 2004) pp. 28882893.
23.Klavins, E., Burden, S. and Napp, N., “Optimal rules for programmed stochastic self-assembly,” Robotics: Science and Systems, Philadelphia, PA (2006).
24.Kavraki, L. E., Svestka, P., Latombe, J.-C. and Overmars, M. H., “Probabilistic roadmaps for path planning in high-dimensional configuration spaces,” IEEE Trans. Robot. Autom. 12 (4), 566580 (1996).
25.Lu, L. and Akella, S., “Folding cartons with fixtures: A motion planning approach,” IEEE Trans. Robot. Autom. 16 (4), 346356 (2000).
26.Lipson, H. and Pollack, J., “Automatic design and manufacture of robotic lifeforms,” Nature 406, 974978 (2000).
27.Murata, S., Yoshida, E., Tomita, K., Kurokawa, H., Kamimura, A. and Kokaji, S., “Hardware Design of Modular Robotic System,” Proceedings of the International Conference on Intelligent Robots and Systems, Takamatsu, Japan (2000) pp. 22102217.
28.Nagpal, R., Programmable Self-assembly: Constructing Global Shape Using Biologically-Inspired Local Interactions and Origami Mathematics PhD Thesis (Massachusetts Institute of Technology, 2001).
29.Nagpal, R., “Self-Assembling Global Shape, Using Ideas From Biology and Origami,” Origami3: Third International Meeting of Origami Science, Math and Education (Hull, T., ed.) (A K Peters, 2002) pp. 219231.
30.Pamecha, A., Ebert-Uphoff, I. and Chirikjian, G., “Useful metrics for modular robot motion planning,” IEEE Trans. Robot. Autom. 13 (4), 531–45 (1997).
31.Song, G. and Amato, N. M., “A motion-planning approach to folding: from paper craft to protein folding,” IEEE Trans. Robot. Autom. 20 (1), 6071 (Feb. 2004).
32.Shen, W.-M., Krivokon, M., Chiu, H., Everist, J., Rubenstein, M. and Venkatesh, J., “Multimode locomotion for reconfigurable robots,” Auton. Robots 20 (2), 165177 (2006).
33.Belcastro, S.-M. and Hull, T. C., “A Mathematical Model for Non-Flat Origami,” Origami3: Proceedings of the 3rd International Meeting of Origami Mathematics, Science and Education (2002) pp. 39–51.
34.Tachi, T., “Simulation of Rigid Origami,” Origami4: Proceedings of the 4th International Meeting of Origami Science, Math and Education (2009), pp. 175–187.
35.Varshavskaya, P., Kaelbling, L. P. and Rus, D., “Automated design of adaptive controllers for modular robots using reinforcement learning,” Int. J. Robot. Res. Special Issue on Self-Reconfigurable Modular Robots (2007).
36.Yim, M., Shen, W-M., Salemi, B., Rus, D., Lipson, H., Klavins, E. and Chirikjian, G., “Modular self-reconfiguring robot systems: Opportunities and challenges,” IEEE/ASME Trans. Mechatronics (2006).
37.Yim, M., Zhang, Y., Lamping, J. and Mao, E., “Distributed control for 3D shape metamorphosis,” Auton. Robots 10 (1), 4156 (2001).
Recommend this journal

Email your librarian or administrator to recommend adding this journal to your organisation's collection.

Robotica
  • ISSN: 0263-5747
  • EISSN: 1469-8668
  • URL: /core/journals/robotica
Please enter your name
Please enter a valid email address
Who would you like to send this to? *
×

Keywords:

Metrics

Full text views

Total number of HTML views: 1
Total number of PDF views: 68 *
Loading metrics...

Abstract views

Total abstract views: 334 *
Loading metrics...

* Views captured on Cambridge Core between September 2016 - 22nd May 2018. This data will be updated every 24 hours.