1.Zeng, G. and Hemami, A., “An overview of robot force control,” Robotica 15, 473–482 (1997).
2.Siciliano, B. and Villani, L., Robot Force Control (Kluwer, The Netherlands, 1999).
3.Yoshikawa, T., “Force Control of Robot Manipulators,” In: Proceedings of the IEEE International Conference on Robotics and Automation, San Francisco, USA (April 2000) pp. 220–226.
4.Sciavicco, L. and Siciliano, B., Modeling and Control of Robot Manipulators, 2nd ed. (Springer–Verlag, London, UK, 2000).
5.Liu, Y. H. and Arimoto, S., “Implicit and Explicit Force Controllers for Rheo–Holonomically Constrained Manipulators and Their Extension to Distributed Cooperation Control,” In: IFAC 13th Triennial World Congress, San Francisco, CA, USA (1996) pp. 618–623.
6.de Queiroz, M. S., Dawson, D. M. and Burg, T., “Position/Force Control of Robot Manipulators Without Velocity/Force Measurements,” In: Proceedings of the IEEE Conference on Robotics and Automation, vol. 3, Minneapolis, MN, USA (April 1996) pp. 2561–2566.
7.Martínez-Rosas, J. C., Arteaga-Pérez, M. A. and Castillo-Sánchez, A. M., “Decentralized control of cooperative robots without velocity-force measurements,” Automatica 42, 329–336 (2006).
8.Canudas de Wit, C., Olsson, H., Åström, K. J. and Lischinsky, P., “A new model for control of systems with friction,” IEEE Trans. Autom. Control 40 (3), 419–425 (1995).
9.Garcia, E., Gonzalez de Santos, P. and Canudas de Wit, C., “Velocity dependence in the cyclic friction arising with gears,” Int. J. Robot. Res. 21 (9), 761–771 (2002).
10.Arteaga-Pérez, M. A. and Rivera-Dueñas, J. C., “Force Control Without Inverse Kinematics nor Robot Model,” In: Proceedings of the CD ROM, European Control Conference ECC07, Kos Island, Greece (July 2007) pp. 4385–4392.
11.Parra-Vega, V., Rodríguez-Ángeles, A., Arimoto, S. and Hirzinger, G., “High precision constrained grasping with cooperative adaptive hand control,” J Intell. Robot. Syst. 32, 235–254 (2001).
12.Arteaga-Pérez, M. A., Castillo-Sánchez, A. M. and Parra-Vega, V., “Cartesian control of robots without dynamic model and observer design,” Automatica 42, 473–480 (2006).
13.Khalil, H. K., Nonlinear Systems, 3rd ed. (Prentice-Hall, Upper Saddle River, NJ, 2002).
14.Murray, R. M., Li, Z. and Sastry, S. S., A Mathematical Introduction to Robotic Manipulation(CRC Press, Boca Raton, FL, 1994).
15.Jung, S. and Hsia, T. C., “Reference Compensation Technique of Neural Force Tracking Impedance Control for Robot Manipulators,” In: Proceedings of the 8th World Congress on Intelligent Control and Automation, Jinan, China (Jul. 7–9, 2010) pp. 650–655.
16.Cheah, C. C., Hou, S. P., Zhao, Y. and Slotine, J.-J. E., “Adaptive Vision and Force Tracking Control for Robots with Constraint Uncertainty,” IEEE/ASME Trans. Mechatronics 15 (3), 389–398 (2010).
17.Martínez-Rosas, J. C., “Identificación Paramétrica de un Robot Industrial con Diferentes Esquemas de Control Adaptable,” Master's Degree Thesis (Universidad Veracruzana, Instituto de Ingeniería, Veracruz, Veracruz, Mexico, 2002).
18.Gudiño-Lau, J. and Arteaga-Pérez, M. A., “Dynamic model and simulation of cooperative robots: A case study,” Robotica 23, 615–624 (2005).
19.Castillo Sánchez, A. M., “Adaptación de Dos Robots Industriales Para su Utilización en el Desarrollo de Nuevas Técnicas y Algoritmos de Control,” Bachelor's Degree Thesis (ENEP, Universidad Nacional Autónoma de México, Mexico, 2002).
