Hostname: page-component-89b8bd64d-4ws75 Total loading time: 0 Render date: 2026-05-07T12:33:44.789Z Has data issue: false hasContentIssue false
  • English
  • Français

Automated detection and characterization of Antarctic basal units using radar sounding data: demonstration in Institute Ice Stream, West Antarctica

Published online by Cambridge University Press:  21 May 2020

Madison L. Goldberg Open the ORCID record for Madison L. Goldberg [Opens in a new window] ,
Dustin M. Schroeder Open the ORCID record for Dustin M. Schroeder [Opens in a new window] ,
Davide Castelletti ,
Elisa Mantelli Open the ORCID record for Elisa Mantelli [Opens in a new window] ,
Neil Ross Open the ORCID record for Neil Ross [Opens in a new window]  and
Martin J. Siegert Open the ORCID record for Martin J. Siegert [Opens in a new window]
Madison L. Goldberg*
Affiliation:
Department of Earth and Planetary Sciences, Harvard University, Cambridge, MA, USA Department of Geophysics, Stanford University, Stanford, CA, USA
Dustin M. Schroeder
Affiliation:
Department of Geophysics, Stanford University, Stanford, CA, USA Department of Electrical Engineering, Stanford University, Stanford, CA, USA
Davide Castelletti
Affiliation:
Department of Geophysics, Stanford University, Stanford, CA, USA
Elisa Mantelli
Affiliation:
Department of Geophysics, Stanford University, Stanford, CA, USA Atmospheric and Oceanic Sciences Program, Princeton University, Princeton, NJ, USA
Neil Ross
Affiliation:
School of Geography, Politics and Sociology, Newcastle University, Newcastle Upon Tyne, UK
Martin J. Siegert
Affiliation:
Grantham Institute and Department of Earth Science and Engineering, Imperial College London, London, UK
*
Author for correspondence: Madison L. Goldberg, E-mail: madisongoldberg@college.harvard.edu
Rights & Permissions [Opens in a new window]

Abstract

Basal units – visibly distinct englacial structures near the ice-bed interface – warrant investigation for a number of reasons. Many are of unknown composition and origin, characteristics that could provide substantial insight into subglacial processes and ice-sheet history. Their significance, moreover, is not limited to near-bed depths; these units appear to dramatically influence the flow of surrounding ice. In order to enable improved characterization of these features, we develop and apply an algorithm that allows for the automatic detection of basal units. We use a tunable layer-optimized SAR processor to distinguish these structures from the bed, isochronous englacial layers and the ice-sheet surface, presenting a conceptual framework for the use of radio-echo character in the identification of ice-sheet features. We also outline a method by which our processor could be used to place observational constraints on basal units’ configuration, composition and provenance.

Keywords

Antarctic glaciologybasal iceglaciological instruments and methodsradio-echo sounding

Information

Type
Article
Information
Annals of Glaciology , Volume 61 , Issue 81 , April 2020 , pp. 242 - 248
Creative Commons
Creative Common License - CCCreative Common License - BY
This is an Open Access article, distributed under the terms of the Creative Commons Attribution licence (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted re-use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright
Copyright © The Author(s), 2020. Published by Cambridge University Press

Introduction

Processes occurring at and near the base of an ice sheet can have dramatic effects on the dynamics of the ice sheet as a whole. Subglacial hydrology, for instance, directly influences basal motion (Bartholomaus and others, Reference Bartholomaus, Anderson and Anderson2008) and plays a role in glacial surface topography (Cooper and others, Reference Cooper, Jordan, Siegert and Bamber2019). Alongside water storage, other basal processes like till deformation affect drag at the base, often to the extent that the modeled velocities of outlet glaciers vary markedly depending on basal parameters (Morlighem and others, Reference Morlighem2010; Habermann and others, Reference Habermann, Truffer and Maxwell2013; Gladstone and others, Reference Gladstone2014). Accordingly, basal processes are intimately related to large-scale ice-sheet stability, especially among the marine sections of the West Antarctic Ice Sheet. Basal melt and its implications for ice-sheet mass balance are of particular significance in these regions (Joughin and Alley, Reference Joughin and Alley2011; Pollard and others, Reference Pollard, DeConto and Alley2015; DeConto and Pollard, Reference DeConto and Pollard2016). In West Antarctica and elsewhere, moreover, basal melt and ocean circulation are closely coupled, with important consequences for grounding line retreat and ice-sheet stability (Colleoni and others, Reference Colleoni2018; Beckmann and others, Reference Beckmann2019). Therefore, as ice sheets are subjected to destabilizing forces from a warming land surface and ocean, it is increasingly important to understand the complex dynamics of processes near the bed.

Ice-penetrating radar sounding is one of the principal tools available for the investigation of those basal processes (Dowdeswell and Evans, Reference Dowdeswell and Evans2004). Airborne ice-penetrating radar sounding produces images, called radargrams, of the internal structure and base of an ice sheet. Because the contrasts in crystal fabric and composition among englacial and subglacial features affect the behavior of transmitted radio waves, radar can image those features, which include subglacial water (Siegert and others, Reference Siegert, Dowdeswell, Gorman and McIntyre1996; Chu and others, Reference Chu2016), englacial layers (Fujita and others, Reference Fujita1999; Siegert, Reference Siegert1999; Karlsson and others, Reference Karlsson, Rippin, Bingham and Vaughan2012) and bed topography and lithology (Schroeder and others, Reference Schroeder, Blankenship, Young, Witus and Anderson2014). Typically, the lower 10–30% of these radargrams are devoid of radar reflections, suggesting the structural homogeneity of that segment of the ice sheet and leading to its characterization as an ‘echo-free zone’ (Drewry and Meldrum, Reference Drewry and Meldrum1978; Drews and others, Reference Drews2009). In recent years, however, due in part to improvements in radar systems and data processing, radar sounding has revealed large features in precisely that near-bed area; notably, basal units have been detected in both Greenland (Bell and others, Reference Bell2014) and Antarctica (Bell and others, Reference Bell2011; Wrona and others, Reference Wrona2018).

The compositions and formation mechanisms of these basal units remain uncertain, and it is likely that different, and sometimes simultaneous, mechanisms are at play depending on various physical parameters (Leysinger Vieli and others, Reference Leysinger Vieli, Martin, Hindmarsh and Lüthi2018). We adopt a broad conception of what may be considered a basal unit, consistent with an array of theorized formation mechanisms that are not necessarily mutually exclusive. One hypothesis is that these units are accretion plumes, which form when meltwater refreezes to the ice-sheet base (Bell and others, Reference Bell2011, Reference Bell2014; Leysinger Vieli and others, Reference Leysinger Vieli, Martin, Hindmarsh and Lüthi2018). In this model, the structures develop through glaciohydraulic supercooling, whereby pressure-related freezing-point depression causes meltwater moving uphill to freeze and accrete. In our analysis, we will differentiate between two modes of basal accretion. On one hand, ice may freeze to the base from below as a single coherent body, separated from overlying ice by virtue of its fabric or some other metamorphic transition; on the other hand, ice may accrete in successive layers, potentially highly deformed or fractured compared to typical isochronous layers. Other hypotheses for the units’ provenance similarly suggest that they are instances of extensive folding near the base, but these models invoke mechanisms other than basal accretion: they involve rheological contrasts within the ice column, variable slip conditions at the base (Wolovick and others, Reference Wolovick, Creyts, Buck and Bell2014; Wrona and others, Reference Wrona2018) or converging ice-sheet flow in the presence of anisotropy (Bons and others, Reference Bons2016). Due to the existence of englacial debris in West Antarctica (Winter and others, Reference Winter2019), we also examine sediment entrainment as a possible mechanism.

Basal units affect both ice-sheet stratigraphy and ice flow, making them worthwhile topics of investigation. Where large-scale deformation of englacial layers is implicated as the formation mechanism (Bons and others, Reference Bons2016), their relation to ice-sheet stratigraphy is direct. However, both observational and modeling studies have demonstrated that even isolated, accreted basal units can significantly alter the stratigraphy of the surrounding ice column (Bell and others, Reference Bell2014; Leysinger Vieli and others, Reference Leysinger Vieli, Martin, Hindmarsh and Lüthi2018), making ice cores difficult to interpret. Of particular relevance to the discussion of basal processes, accreted basal units can also affect ice flow through deformation and softening during the melt and refreezing processes (Bell and others, Reference Bell2014); these units, therefore, are closely linked to basal dynamics and ice-sheet stability.

Our investigation of Antarctic basal units is twofold: first we present a novel technique for the automatic detection of these units in radargrams, then we use the algorithm output to theorize about the formation and composition of a specific basal unit in Institute Ice Stream, West Antarctica (Fig. 1a). Using the output of our automated detector, we consider the feasibility of several possible formation mechanisms. We introduce this algorithm and discussion as a conceptual framework, serving as a launching point for further echo-character-based analysis of these structures in the future.

Fig. 1.

West Antarctic basal structures selected for analysis: (a) Radargram of a segment of survey transect C31a. The most prominent units visible in this radargram are labeled, hereafter referred to as structure 1 and structure 2. These structures are viewed in cross-section, with structure 1 ~ 300 m in height and structure 2 between 100 and 150 m thick. Ross and others (Reference Ross, Corr and Siegert2019) have discussed both of these features in detail. (b) Flight lines (transects) of the British Antarctic Survey's study of Institute and Möller ice streams, West Antarctica. Transect C31a is highlighted in blue, tracing a path from 80°S, 81°W to 83°S, 75°W. A yellow circle denotes the approximate intersection point of the two structures with transect C31a, near 82°S, 77°W. (Both structures stretch over several transects parallel to C31a, and Ross and others (Reference Ross, Corr and Siegert2019) provide a complete mapping.) The grounding line, based on data from the National Snow & Ice Data Center (Bindschadler, Reference Bindschadler2011), is traced in purple and shading is based on BEDMAP2 surface elevation (Fretwell and others, Reference Fretwell2013).

Methods and Data

Processing method

Our approach relies on a novel form of synthetic aperture radar (SAR) processing applied to a set of raw data from the British Antarctic Survey's investigation of the Institute and Möller ice streams, shown in Figure 1 and described in more detail below. Typically, SAR processing allows for finer along-track resolution and an increased signal-to-noise ratio (SNR) through coherent summation of spatially adjacent radar returns (Peters and others, Reference Peters2007). The disadvantage of this technique, however, is that spatially adjacent pulses are not always in phase. When this is the case, as it is for sloping specular reflectors, coherent summation results in destructive interference and renders those features weaker or invisible on the resulting radargram (Holschuh and others, Reference Holschuh, Christianson and Anandakrishnan2014). This phenomenon is commonly seen wherever englacial layers are steeply sloping; images of such regions are frequently characterized by patches of noise where destructive interference has muted the signal. Castelletti and others (Reference Castelletti, Schroeder, Mantelli and Hilger2019) have addressed this problem through a technique called Layer Optimized SAR (LOSAR) processing. LOSAR prevents destructive interference by correcting for the differences in phase between adjacent pulses before summing them. For every pixel, the processor iterates over a range of phase shifts and selects the one that optimizes the SNR of the layer return upon coherent summation. Because the slope of the layer dictates the degree to which adjacent pulses will be out of phase with one another, the optimal phase shift is a direct function of layer slope.

Phase shift response function

As part of its operation, the LOSAR algorithm calculates SNR values as a function of phase shift for all pixels in a radargram. The relationship between SNR and phase shift forms the basis of our automatic detection approach and is hereafter denoted as the ‘phase shift response function’. Plotting the phase shift response function for pixels in specific ice-sheet features demonstrates that each responds differently to applied phase shifts. We illustrate this in Fig. 2 using pixels selected from the bed, an englacial layer and the basal unit marked ‘1’ in Fig. 1a.

Fig. 2.

LOSAR processed echo power as a function of applied phase shift for three features: bedrock (green), englacial layer (black), and structure 1 (blue). Thin lines plot the relationships for individual pixels and thick lines plot the average over six pixels for each feature.

The relationships shown in Fig. 2 are consistent with the known radar sounding character of their sources. Layers (black curves in Fig. 2) are highly specular reflectors (Schroeder and others, Reference Schroeder, Blankenship, Raney and Grima2015) and are therefore expected to have a narrowly optimized phase shift range. Because the signal is specularly reflected in one direction, there is one phase shift that significantly increases the SNR of the return; this behavior is exemplified by the small peak width of the phase shift response function for the layer. As mentioned previously, that optimal phase shift is a function of layer slope (Castelletti and others, Reference Castelletti, Schroeder, Mantelli and Hilger2019). The bed (green curves in Fig. 2) is a far more diffuse reflector; it produces returns of significant magnitude across a broad range of directions and is therefore enhanced by a wide range of phase shifts. This is a physical basis for the wide plateau of optimal phase shifts observed in the graph. The basal unit in Institute Ice Stream, with its smaller plateau, appears to behave somewhere between the diffuse scattering bed and specular layers. Phase shift response functions for pixels from structure 1 are the blue curves in Fig. 2. We leverage these feature-dependent differences in phase shift response functions during our automated classification approach as well as during our analysis of the features themselves.

Classification algorithm

These distinctive phase shift response functions allow us to develop a technique that classifies feature types. After eliminating the surface and the bed, our approach assigns model phase shift response functions to the two remaining feature types: isochronous internal layers and potential basal units. We then generate the phase shift response functions for every pixel, examining its unique graph and matching it to the model function that it most resembles – thereby designating it as part of a basal unit or part of a layer.

In order to remove the surface and bed echoes, we begin by separating the radargram into an upper and lower half. We select the brightest pixels per range line in each; these can reasonably be expected to be part of the ice surface and bed, respectively. (This is possible after the removal of the brightest return from the flight line). We then perform a linear interpolation between the selected bright pixels in the upper half to pick the surface and a cubic interpolation between bright pixels in the lower half to pick the bed (Fig. 3). After interpolating, we apply a simple region-growing algorithm to properly remove the entire diffuse reflection from the bed. With the surface and bed removed, the approach focuses on the interior of the ice sheet.

Fig. 3.

Ice surface and bed. The ice-sheet surface is traced using a linear interpolation (shown in yellow) and the bed is traced using a cubic interpolation (shown in red). Both interpolations were performed using brightness threshold picks, which can be seen scattered around the respective curves.

In the absence of the surface and bed, any remaining features are assumed to be either layers or potential basal units. We distinguish between these using their characteristic phase shift response functions. The first differentiation test we use involves the conversion of each phase shift response function to a probability density function, plotting the frequency of power values achieved across the entire range of phase shifts applied. These probability density functions will look different for different features, likely as a result of the differences in ‘tailedness’ among phase shift response functions for various features; this tailedness is similar to abruptness in character (Oswald and Gogineni, Reference Oswald and Gogineni2008; Young and others, Reference Young, Schroeder, Blankenship, Kempf and Quartini2016), but applied to the azimuth response, like specularity. We apply a Gaussian fit to the model probability density functions for a layer and a basal unit, produced by averaging over a collection of pixels from each feature. Finally, we conduct the comparison, generating this power distribution function from every pixel and applying a Gaussian fit. This allows us to compare the standard deviation of the Gaussian from every pixel to the standard deviations of the model layer and basal unit Gaussians. Pixels are thereby sorted on a binary basis, into either the layer group or the basal unit group.

We end by conducting a short secondary test, re-evaluating only those pixels that have been classified as part of a basal unit. Specifically, we reclassify as layers any pixels whose phase shift response functions are not centered near zero. We consistently observe that the phase shift response functions for pixels in the basal unit are centered around zero (as in Fig. 2) likely because of the presence of many small specular segments of varying slopes (explained in depth in the discussion). Of course, the phase shift response functions for a layer can be centered at zero, too; this occurs when the layer is flat and no phase shift is necessary to correct for the slope. This implies that possessing a phase shift response function centered at zero is necessary but not sufficient to classify a pixel as a basal unit; for this reason, it is possible that pixels in flat layers could fail the second test (examples of which can be seen in Fig. 4). Figure 4 does show, however, reasonable success in characterizing flat layers in general, suggesting that most of these pixels have already been correctly classified as layers by the preliminary test and are not subject to the second test.

Fig. 4.

Output of automatic feature classification algorithm: (a) The original radargram of the Institute Ice Stream basal unit, the algorithm's input. (b) Classification of pixels by the algorithm. Noise, ice surface and bed are eliminated first, and remaining pixels are sorted into basal unit or layer classes afterwards.

Raw data

The radar sounding data we analyze were gathered in an airborne geophysical investigation of the Institute and Möller ice streams (Fig. 1b), which are located in the Weddell Sea sector of the West Antarctic ice sheet and whose drainage accounts for 20% of the ice sheet by area (Rose and others, Reference Rose2015). The campaign was conducted by the British Antarctic Survey during the 2010–2011 field season and the radar sounding data were collected by the Polarimetric-radar Airborne Science INstrument (PASIN) (Siegert and others, Reference Siegert2016; Jeofry and others, Reference Jeofry2018).

Results

Figure 4 shows the output of this automatic feature classification algorithm, with the ice-sheet feature indicated by pixel color. As is visible from Figure 4b, the classifier has processed raw ice-penetrating radar data and produced a workable map of a basal unit in this region of Institute Ice Stream, including its complex morphology. (We remark on structures 1 and 2 separately in the discussion.) There are, to be sure, areas that seem prone to inaccurate categorization, as demonstrated by the scattered yellow pixels above structure 2 and the band of yellow near the surface. With regard to the pixels above structure 2, it is important to note that these mid-depth layers have also undergone significant deformation, and so may bear some resemblance to structure 2 in their echo character without having achieved the same level of stark stratigraphic contrast. Because these pixels are located primarily within locally flat segments, however, we believe they are likely true misclassifications, possibly slipping through the second test because their phase shift response functions are centered at zero.

The classification of ice near the surface, however, may be more grounded in physical properties; while this misclassification provides an opportunity for improvement if the algorithm is to be used purely to find basal units, it seems also to indicate that there is some real difference in the shallow subsurface, as has been previously shown (Grima and others, Reference Grima, Blankenship, Young and Schroeder2014a). This suggests another possible use for the processor as an indicator of heterogeneity in the ice sheet that is not directly identifiable from the radargram itself.

We emphasize that what we provide here is for now a conceptual framework, demonstrating the feasibility of phase shift response as a classification mechanism. We have tested it on a limited dataset, which we present as a case study. Future work could be aimed at eliminating empirical thresholds and improving the model functions used, making the processor location-general. In other words, phase shift response could serve as a starting point for future image processing or machine learning algorithms. As we have remarked, phase shift response is grounded in physical characteristics of the source feature; this implies that the fundamental technique should theoretically be applicable regardless of ice-sheet conditions.

Discussion

Derivation of the scattering function

Here, we focus specifically on the potential basal unit in Institute Ice Stream, which has been noted elsewhere by Bingham and others (Reference Bingham2015), Winter and others (Reference Winter2015) and Ross and others (Reference Ross, Corr and Siegert2019). The radar echo character of an ice-sheet component – that is, the manner in which it interacts with transmitted radar pulses – is an expression of its wavelength-scale geometry (Campbell, Reference Campbell2007; Grima and others, Reference Grima, Schroeder, Blankenship and Young2014b). Therefore, the echo character of the basal unit allows us to place constraints on its structure and formation. One graphical representation of a feature's echo character is its scattering function, which describes how returned signal power depends on the radar look angle (Ulaby and others, Reference Ulaby2014).

The following derivation indicates that there is in fact a one-to-one relation between the phase shift response function and the scattering function of a feature. As detailed above, the phase shift response function describes, for a given pixel, the dependence of signal power on phase shift. Consistent with the demonstration by Holschuh and others (Reference Holschuh, Christianson and Anandakrishnan2014) that power loss during SAR processing depends on layer slope, Castelletti and others (Reference Castelletti, Schroeder, Mantelli and Hilger2019) have shown that there exists a direct relationship between phase shift and optimal layer slope:

(1)$$\Delta\varphi = -{4\pi f\Delta x n_{\rm i}\sin{\theta}\over c}$$

where Δφ is the phase shift between adjacent range lines that optimizes SNR, f is central frequency, Δx is distance between range lines, n i is ice's refractive index, c is the speed of light, and θ is the local slope of the layer, expressed as an angle to the horizontal.

The slope of a layer can be considered analogous to look angle; changing the layer slope with respect to an instantaneous aircraft position produces the same effect as changing the aircraft position with respect to a fixed layer. This conversion of phase shift to incidence angle provides a means of converting between phase shift response function and scattering function. Finally, because the relationship between layer slope and phase shift is monotonic, those two functions will have the same shape, scaled to different axes. Phase shift response function is therefore a good proxy for the scattering function of an observed englacial feature.

Echo character of Institute Ice Stream structures

Having established a one-to-one relationship between a feature's phase shift response function and its scattering function, we can analyze the basal unit's phase shift response function as a representation of its echo character. We individually address four possible compositions for this basal structure: typical isochronous layers, entrained sediment, an isolated body accreted to the base and heavily deformed or fractured layers.

Typical isochronous layers

As is visible in Figure 2, the phase shift response function (and, by the previous derivation, the scattering function) of a regular isochronous layer is distinctive. As would be expected for a specular reflector, a layer's scattering function possesses one clear peak, as it reflects at precisely one angle. Structures 1 and 2, as demonstrated by Figure 5, exhibit scattering functions that are easily distinguishable from that of an archetypal isochronous layer. Both structures have scattering functions with wide plateaus, indicating some disruption in the consistent specularity that characterizes overlying layers. Furthermore, these plateaus are visible not only in the average scattering function for the feature, but in the scattering functions of individual pixels, too, shown by the thinner lines in Figure 5. This seems to indicate some fundamental departure from typical layer specularity in the geometry of the basal unit.

Fig. 5.

LOSAR processed echo power as a function of applied phase shift for the two sections of the basal unit, as numbered in Figure 1: structure 1 (blue) and structure 2 (green). Thin lines plot the relationships for individual pixels and thick lines plot the average over six pixels for each feature.

Entrained sediment

Given the presence of englacial debris in West Antarctica (Winter and others, Reference Winter2019), we also consider the possibility that the basal unit represents some pocket of entrained sediment. The cumulative effect of a collection of point scatterers is to produce similar reflections regardless of the incidence angle (Aglyamov and others, Reference Aglyamov, Schroeder and Vance2017). On average, therefore, returned power should be approximately constant over the entire range of angles, producing a flat scattering function. The scattering functions for both structures have clear maxima, as shown in Figure 5, so we find that sediment is an unlikely composition for either of these specific features.

Single accreted body

Basal freeze-on has typically been expected to produce units containing both the refrozen ice itself as well as deformed internal layers (Bell and others, Reference Bell2014; Leysinger Vieli and others, Reference Leysinger Vieli, Martin, Hindmarsh and Lüthi2018). We first consider the boundary case, in which the basal unit is a single coherent body of ice accreted at the base, distinguishable from overlying ice by virtue of a difference in crystalline fabric or some other metamorphic transition. The basis of radio echo sounding, however, is the existence of dielectric contrasts within the ice column (Siegert, Reference Siegert1999); as a result, we would expect echoes from the surface but not the interior of a homogeneous body, because that body would not contain the requisite contrasts to produce a reflection. We do, however, see echoes from within both basal structures; a collection of the individual phase shift response functions in Figure 5 is produced by pixels in the structures’ interiors. Consequently, these structures seem unlikely to have formed by the accretion of a single coherent body onto the base of the ice column.

Deformation and folding

A number of processes have been shown to produce large-scale deformation of internal layers near the base. These include mechanisms that do not invoke basal freeze-on and therefore would suggest that the basal structures are entirely composed of previously linear layers that have since been heavily deformed. Such mechanisms include moving sticky and slippery patches (Wolovick and others, Reference Wolovick, Creyts, Buck and Bell2014) and convergent flow coupled with anisotropy (Bons and others, Reference Bons2016).

Of course, basal freeze-on generates large-scale folding as well, as has been shown through both modeling studies (Leysinger Vieli and others, Reference Leysinger Vieli, Martin, Hindmarsh and Lüthi2018) and radar observations (Bell and others, Reference Bell2014). In these models, basal structures might be composed of a combination of accreted ice and heavily deformed layers.

Either way, the scattering functions shown in Figure 5 seem indicative of the presence of folded and deformed layers in some capacity. As stated above, and further exemplified in Figure 2, the basal unit scattering functions are not characteristic of perfectly specular or perfectly diffuse reflectors. Instead, they appear to represent an echo character that is in some sense intermediate, as might occur in the presence of deformed layers. In particular, the functions could be explained by some process that ‘shortens’ the specular interface. Major deformation could produce that effective shortening by folding layers to such an extent that what was once a long interface would become a collection of specular segments of varying slope. This mechanism seems particularly reasonable for structure 2, the distance of which from the base makes accretion of refrozen meltwater unlikely; it likely began as typical englacial layers that were deformed, or possibly fragmented, to such a degree that they no longer resemble other layers in their echo character.

As mentioned, such massive folding can be a product of a number of dynamic processes. We believe this offers another application of our algorithm and of the phase shift response function in particular. The phase shift response function, as demonstrated, provides a way to approximate a feature's scattering function. Process-specific models, like those conducted by Leysinger Vieli and others (Reference Leysinger Vieli, Martin, Hindmarsh and Lüthi2018), may produce process-specific scattering signatures. Future work could compare the scattering functions we expect from models of various processes to the actual scattering functions that this algorithm allows us to estimate. Different processes, for example, may produce scattering functions with different depth dependencies, allowing us to use the phase shift response function to distinguish between various folding and deformation mechanisms.

Conclusion

With their implications for basal processes and ice-sheet morphology, basal units remain a subject worthy of investigation. Here, we provide an algorithm aimed at facilitating the analysis of their formation mechanisms and compositions. The framework we present here is, in theory, applicable to any coherent radar sounding data. Applied at scale, it could eliminate the need to manually identify and analyze basal units in large radar sounding datasets. As a case study, we applied this technique to a prominent basal unit in Institute Ice Stream. In particular, the algorithm allows us to approximate the features’ scattering functions and echo character. In this case, the structures seem to be the result of large-scale deformation and folding, the cause of which remains to be investigated. That investigation might take the form of a comparison between observed and modeled scattering functions; moreover, the same approach could be used to investigate any number of hypotheses as to a unit's formation mechanism and composition.

Acknowledgments

We thank our reviewers for their thoughtful consideration of this article and for their helpful comments. SAR-processed radargrams from the BAS campaign of Institute and Möller ice streams are available through the UK Polar Data Centre at https://data.bas.ac.uk/metadata.php?id=GB/NERC/BAS/PDC/00937.

References

Aglyamov, Y, Schroeder, DM and Vance, SD (2017) Bright prospects for radar detection of Europa's ocean. Icarus 281, 334–337. doi: 10.1016/j.icarus.2016.08014CrossRefGoogle Scholar
Bartholomaus, TC, Anderson, RS and Anderson, SP (2008) Response of glacier basal motion to transient water storage. Nature Geoscience 1, 33–37. doi: 10.1038/ngeo.2007.52CrossRefGoogle Scholar
Beckmann, J and 5 others (2019) Modeling the response of Greenland outlet glaciers to global warming using a coupled flow line-plume model. The Cryosphere 13(9), 2281–2301. doi: 10.5194/tc-13-2281-2019CrossRefGoogle Scholar
Bell, RE and 10 others (2011) Widespread persistent thickening of the East Antarctic ice sheet by freezing from the base. Science 331(6024), 1592–1595. doi: 10.1126/science.1200109CrossRefGoogle ScholarPubMed
Bell, RE and 8 others (2014) Deformation, warming and softening of Greenland's ice by refreezing meltwater. Nature Geoscience 7, 497–502. doi: 10.1038/NGEO2179CrossRefGoogle Scholar
Bindschadler, R (2011) Getting around Antarctica: new high-resolution mappings of the grounded and freely-floating boundaries of the Antarctic Ice Sheet created for the International Polar Year. The Cryosphere 5, 569–588. doi: 10.5194/tc-5-569-2011CrossRefGoogle Scholar
Bingham, RG and 9 others (2015) Ice-flow structure and ice dynamic changes in the Weddell Sea sector of West Antarctica from radar-imaged internal layering. Journal of Geophysical Research-Earth Surface 120, 655–670. doi: 10.1002/2014JF003291CrossRefGoogle Scholar
Bons, PD and 10 others (2016) Converging flow and anisotropy cause large-scale folding in greenland's ice sheet. Nature Communications 7, 11427. doi: 10.1038/ncomms11427CrossRefGoogle ScholarPubMed
Campbell, BA (2007) A rough-surface scattering function for Titan radar studies. Geophysical Research Letters 34, L14203. doi: 10.1029/2007GL030442CrossRefGoogle Scholar
Castelletti, D, Schroeder, DM, Mantelli, E and Hilger, A (2019) Layer optimized SAR processing and slope estimation in radar sounder data. Journal of Glaciology 65(254), 983–988. doi: 10.1017/jog.2019.72.CrossRefGoogle Scholar
Chu, W and 5 others (2016) Extensive winter subglacial water storage beneath the Greenland Ice Sheet. Geophysical Research Letters 43(24), 12484–12492. doi: 10.1002/2016GL071538CrossRefGoogle Scholar
Colleoni, F and 7 others (2018) Spatio-temporal variability of processes across Antarctic ice-bed-ocean interfaces. Nature Communications 9(1), 2289. doi: 10.1038/s41467-018-04583-0.CrossRefGoogle ScholarPubMed
Cooper, MA, Jordan, TM, Siegert, MJ and Bamber, JM (2019) Surface expression of basal and englacial features, properties, and processes of the Greenland ice sheet. Geophysical Research Letters 46(2), 783–793. doi: 10.1029/2018GL080620CrossRefGoogle Scholar
DeConto, RM and Pollard, D (2016) Contribution of Antarctica to past and future sea-level rise. Nature 531(7596), 591–597. doi: 10.1038/nature17145CrossRefGoogle ScholarPubMed
Dowdeswell, JA and Evans, S (2004) Investigations of the form and flow of ice sheets and glaciers using radio-echo sounding. Reports on Progress in Physics 67(10), 1821. doi: 10.1088/0034-4885/67/10/R03CrossRefGoogle Scholar
Drewry, DJ and Meldrum, DT (1978) Antarctic airborne radio echo sounding, 1977–78. Polar Record 19(120), 267–273CrossRefGoogle Scholar
Drews, R and 7 others (2009) Layer disturbances and the radio-echo free zone in ice sheets. The Cryosphere 3, 195–203CrossRefGoogle Scholar
Fretwell, P and 59 others (2013) Bedmap2: improved ice bed, surface and thickness datasets for Antarctica. The Cryosphere 7(1), 375–393. doi: 10.5194/tc-7-375-2013CrossRefGoogle Scholar
Fujita, S and 6 others (1999) Nature of radio echo layering in the Antarctic ice sheet detected by a two-frequency experiment. Journal of Geophysical Research 104(B6), 13013–13024. doi: 10.1029/1999JB900034CrossRefGoogle Scholar
Gladstone, R and 7 others (2014) Importance of basal processes in simulations of a surging Svalbard outlet glacier. The Cryosphere 8, 1393–1405. doi: 10.5194/tc-8-1393-2014CrossRefGoogle Scholar
Grima, C, Blankenship, DD, Young, DA and Schroeder, DM (2014a) Surface slope control on firn density at Thwaites Glacier, West Antarctica: results from airborne radar sounding. Geophysical Research Letters 41(9), 6787–6794. doi: 10.1002/2014GL061635CrossRefGoogle Scholar
Grima, C, Schroeder, DM, Blankenship, DD and Young, DA (2014b) Planetary landing-zone reconnaissance using ice-penetrating radar data: concept validation in Antarctica. Planetary and Space Science 103, 191–204. doi: 10.1016/j.pss.2014.07.018CrossRefGoogle Scholar
Habermann, M, Truffer, M and Maxwell, D (2013) Changing basal conditions during the speed-up of Jakobshavn Isbræ, Greenland. The Cryosphere 7, 1679–1692. doi: 10.5194/tc-7-1679-2013CrossRefGoogle Scholar
Holschuh, N, Christianson, K and Anandakrishnan, S (2014) Power loss in dipping internal reflectors, imaged using ice-penetrating radar. Annals of Glaciology 55(67), 49–56. doi: 10.3189/2014AoG67A005CrossRefGoogle Scholar
Jeofry, H and 6 others (2018) A new bed elevation model for the Weddell Sea sector of the West Antarctic Ice Sheet. Earth System Science Data 10, 711–725. doi: 10.5194/essd-10-711-2018CrossRefGoogle Scholar
Joughin, I and Alley, RB (2011) Stability of the West Antarctic ice sheet in a warming world. Nature Geoscience 4, 506–513. doi: 10.1038/NGEO1194CrossRefGoogle Scholar
Karlsson, NB, Rippin, DM, Bingham, RG and Vaughan, DG (2012) A ‘continuity index’ for assessing ice-sheet dynamics from radar-sounded internal layers. Earth and Planetary Sciences Letters 335–336, 88–94. doi: 10.1016/j.epsl/2012.04.034CrossRefGoogle Scholar
Leysinger Vieli, GJMC, Martin, C, Hindmarsh, RCA and Lüthi, I (2018) Basal freeze-on generates complex ice-sheet stratigraphy. Nature Communications 9(1), 4669. doi: 10.1038/s41467-018-07083-3.CrossRefGoogle ScholarPubMed
Morlighem, M and 5 others (2010) Spatial patterns of basal drag inferred using control methods from a full-Stokes and simpler models for Pine Island Glacier, West Antarctica. Geophysical Research Letters 37, L14502. doi: 10.1029/2010GL043853CrossRefGoogle Scholar
Oswald, GKA and Gogineni, SP (2008) Recovery of subglacial water extent from Greenland radar survey data. Journal of Glaciology 54(184), 94–106. doi: 10.3189/002214308784409107CrossRefGoogle Scholar
Peters, ME and 5 others (2007) Along-track focusing of airborne radar sounding data from West Antarctica for improving basal reflection analysis and layer detection. IEEE Transactions on Geoscience and Remote Sensing 45(9), 2725–2736. doi: 10.1109/TGRS.2007.897416CrossRefGoogle Scholar
Pollard, D, DeConto, RM and Alley, RB (2015) Potential Antarctic Ice Sheet retreat driven by hydrofracturing and ice cliff failure. Earth and Planetary Science Letters 412, 112–121. doi: 10.1016/j.epsl.2014.12.035CrossRefGoogle Scholar
Rose, KC and 8 others (2015) Ancient pre-glacial erosion surfaces preserved beneath the West Antarctic Ice Sheet. Earth Surface Dynamics 3(1), 139–152. doi: 10.5194/esurf-3-139-2015CrossRefGoogle Scholar
Ross, N, Corr, H and Siegert, M (2019) Large-scale englacial folding and deep-ice stratigraphy within West Antarctic Ice Sheet. The Cryosphere Discussion (in review). doi: 10.5194/tc-2019-2019-245Google Scholar
Schroeder, DM, Blankenship, DD, Raney, RK and Grima, C (2015) Estimating subglacial water geometry using radar bed echo specularity: application to Thwaites Glacier, West Antarctica. IEEE Geoscience and Remote Sensing Letters 12(3), 443–447. doi: 10.1109/LGRS.2014.2337878CrossRefGoogle Scholar
Schroeder, DM, Blankenship, DD, Young, DA, Witus, AE and Anderson, JB (2014) Airborne radar sounding evidence for deformable sediments and outcropping bedrock beneath Thwaites Glacier, West Antarctica. Geophysical Research Letters 41(20), 7200–7208. doi: 10.1002/2014GL061645CrossRefGoogle Scholar
Siegert, MJ (1999) On the origin, nature and uses of Antarctic ice-sheet radio-echo layering. Progress in Physical Geography 23(2), 159–179. doi: 10.1177/030913339902300201CrossRefGoogle Scholar
Siegert, MJ and 7 others (2016) Subglacial controls on the flow of Institute Ice Stream, West Antarctica. Annals of Glaciology 57(73), 19–24. doi: 10.1017/aog.2016.17CrossRefGoogle Scholar
Siegert, MJ, Dowdeswell, JA, Gorman, MR and McIntyre, NF (1996) An inventory of Antarctic subglacial lakes. Antarctic Science 8, 281–286. doi: 10.1017/S0954102096000405CrossRefGoogle Scholar
Ulaby, FT and 8 others (2014) Microwave Radar and Radiometric Remote Sensing. Ann Arbor: University of Michigan Press.CrossRefGoogle Scholar
Winter, K and 6 others (2015) Airborne radar evidence for tributary flow switching in Institute Ice Stream, West Antarctica: implications for ice sheet configuration and dynamics. Journal of Geophysical Research 120(9), 1611–1625. doi: 10.1002/2015JF003518Google Scholar
Winter, K and 10 others (2019) Radar-detected englacial debris in the West Antarctic Ice Sheet. Geophysical Research Letters 46(17-18), 10454–10462. doi: 10.1029/2019GL084012CrossRefGoogle Scholar
Wolovick, M, Creyts, TT, Buck, WR and Bell, RE (2014) Traveling slippery patches produce thickness-scale folds in ice sheets. Geophysical Research Letters 41, 8895–8901. doi: 10.1002/2014GL062248CrossRefGoogle Scholar
Wrona, T and 5 others (2018) Position and variability of complex structures in the central East Antarctic ice sheet. Special Publications of the Geological Society of London 461(1), 113–129. doi: 10.1144/SP461.12CrossRefGoogle Scholar
Young, DA, Schroeder, DM, Blankenship, DD, Kempf, SD and Quartini, E (2016) The distribution of basal water between Antarctic subglacial lakes from radar sounding. Philosophical Transactions of the Royal Society A 374(2059), 20140297. doi: 10.1098/rsta.2014.0297CrossRefGoogle ScholarPubMed
Figure 0

Fig. 1. West Antarctic basal structures selected for analysis: (a) Radargram of a segment of survey transect C31a. The most prominent units visible in this radargram are labeled, hereafter referred to as structure 1 and structure 2. These structures are viewed in cross-section, with structure 1 ~ 300 m in height and structure 2 between 100 and 150 m thick. Ross and others (2019) have discussed both of these features in detail. (b) Flight lines (transects) of the British Antarctic Survey's study of Institute and Möller ice streams, West Antarctica. Transect C31a is highlighted in blue, tracing a path from 80°S, 81°W to 83°S, 75°W. A yellow circle denotes the approximate intersection point of the two structures with transect C31a, near 82°S, 77°W. (Both structures stretch over several transects parallel to C31a, and Ross and others (2019) provide a complete mapping.) The grounding line, based on data from the National Snow & Ice Data Center (Bindschadler, 2011), is traced in purple and shading is based on BEDMAP2 surface elevation (Fretwell and others, 2013).

Figure 1

Fig. 2. LOSAR processed echo power as a function of applied phase shift for three features: bedrock (green), englacial layer (black), and structure 1 (blue). Thin lines plot the relationships for individual pixels and thick lines plot the average over six pixels for each feature.

Figure 2

Fig. 3. Ice surface and bed. The ice-sheet surface is traced using a linear interpolation (shown in yellow) and the bed is traced using a cubic interpolation (shown in red). Both interpolations were performed using brightness threshold picks, which can be seen scattered around the respective curves.

Figure 3

Fig. 4. Output of automatic feature classification algorithm: (a) The original radargram of the Institute Ice Stream basal unit, the algorithm's input. (b) Classification of pixels by the algorithm. Noise, ice surface and bed are eliminated first, and remaining pixels are sorted into basal unit or layer classes afterwards.

Figure 4

Fig. 5. LOSAR processed echo power as a function of applied phase shift for the two sections of the basal unit, as numbered in Figure 1: structure 1 (blue) and structure 2 (green). Thin lines plot the relationships for individual pixels and thick lines plot the average over six pixels for each feature.