Hostname: page-component-89b8bd64d-5bvrz Total loading time: 0 Render date: 2026-05-08T08:39:24.308Z Has data issue: false hasContentIssue false

A new approach for investigating spatial relationships of ichnofossils: a case study of Ediacaran–Cambrian animal traces

Published online by Cambridge University Press:  19 May 2022

Emily G. Mitchell*
Affiliation:
Department of Zoology, University of Cambridge, Cambridge, CB2 3EJ, U.K. E-mail: ek338@cam.ac.uk
Scott D. Evans
Affiliation:
Department of Geosciences, Virginia Tech, Blacksburg, Virginia 24061, U.S.A. E-mail: scotte23@vt.eu, xiao@vt.edu
Zhe Chen
Affiliation:
State Key Laboratory of Palaeobiology and Stratigraphy, Nanjing Institute of Geology and Palaeontology, and Centre for Excellence in Life and Paleoenvironment, Chinese Academy of Sciences, Nanjing 210008, China. E-mail: zhechen@nigpas.ac.cn
Shuhai Xiao
Affiliation:
Department of Geosciences, Virginia Tech, Blacksburg, Virginia 24061, U.S.A. E-mail: scotte23@vt.eu, xiao@vt.edu
*
*Corresponding author.

Abstract

Trace fossils record foraging behaviors, the search for resources in patchy environments, of animals in the rock record. Quantification of the strength, density, and nature of foraging behaviors enables the investigation of how these may have changed through time. Here, we present a novel approach to explore such patterns using spatial point process analyses to quantify the scale and strength of ichnofossil spatial distributions on horizontal bedding planes. To demonstrate the utility of this approach, we use two samples from the terminal Ediacaran Shibantan Member in South China (between 551 and 543 Ma) and the early Cambrian Nagaur Sandstone in northwestern India (between 539 and 509 Ma). We find that ichnotaxa on both surfaces exhibited significant nonhomogeneous lateral patterns, with distinct levels of heterogeneity exhibited by different types of trace fossils. In the Shibantan, two ichnotaxa show evidence for mutual positive aggregation over a shared resource, suggesting the ability to focus on optimal resource areas. Trace fossils from the Nagaur Sandstone exhibit more sophisticated foraging behavior, with greater niche differentiation. Critically, mark correlation functions highlight significant spatial autocorrelation of trace fossil orientations, demonstrating the greater ability of these Cambrian tracemakers to focus on optimal patches. Despite potential limitations, these analyses hint at changes in the development and optimization of foraging at the Ediacaran/Cambrian transition and highlight the potential of spatial point process analysis to tease apart subtle differences in behavior in the trace fossil record.

Information

Type
Articles
Creative Commons
Creative Common License - CCCreative Common License - BY
This is an Open Access article, distributed under the terms of the Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0/), which permits unrestricted re-use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright
Copyright © The Author(s), 2022. Published by Cambridge University Press on behalf of The Paleontological Society
Figure 0

Figure 1. Schematic drawing showing different movement paths (blue lines), midpoints of the movement paths (stars), and background patchy environment (gray areas). Each midpoint is identified by the length and orientation of the corresponding line segments (“marks”). A, Random MCF: The moving organism does not respond to the underlying environment. The lengths of each segments, their orientations, and the distances between their midpoints are random. B, Nonrandom length movement: The tracemaker detects a preferable underlying substrate and so makes shorter path segments to maximize the time spent in the preferred resource. Marked lengths of paths and distances between midpoints are nonrandom, whereas marked orientations of paths are random. Short segments occur close together. C, Nonrandom length and nonrandom orientation MCF: The tracemaker detects a preferable underlying substrate and makes both shorter path segments and sharper turns to maximize the time spent in the preferred resource. Crucially, it turns around when it leaves its preferred area. Mark lengths and orientations of paths are nonrandom. Short segments and those with tight turns are more likely to occur closer together.

Figure 1

Figure 2. Geological map of the Yangtze Gorges area (A) and stratigraphic column of the Dengying Formation (B). Inset map shows major tectonic units, with red rectangle marking area shown in A. Star marks field site. Fossil ranges are updated from Xiao et al. (2021) and Liang et al. (2020). The two possible correlations of the 551.1 ± 0.7 Ma tuffaceous bed are based on An et al. (2015) and Zhou et al. (2017) and are denoted by two blue arrows. Mbr, Member; Fm, Formation; HMJ, Hamajing Member; SSF, small shelly fossil; Cry., Cryogenian; Cam., Cambrian. See Xiao et al. (2021) for sources of radiometric dates.

Figure 2

Figure 3. Geological map of the Bikaner-Nagaur basin (A) and stratigraphic column of the Marwar Supergroup (B). Inset map in A shows general location of the basin in India. Black star marks fossil locality near Dulmera in NW India. Bb, Boulder bed; Dol, dolostone; Lst, limestone; Gr, Group; Pr, Period; SS, sandstone. Note: stratigraphic column is not to scale, but the Nagaur SS is reported to be approximately 500 m in total thickness, with the underlying Bilara Group approximately 300 m thick (Pandey et al. 2014). After figs. 1 and 2 of Pandey et al. (2014) and courtesy of Dhirenda Pandey.

Figure 3

Figure 4. Ediacaran and Cambrian bedding surfaces. A, Shibantan surface analyzed in this study. B, Close-up of black box in A, showing small Helminthoidichnites-type trails (white oval) and Streptichnus with spiral structures (black arrows) indicative of this ichnotaxon. C, Nagaur surface analyzed in this study, with Treptichnus- and Rusophycus-type traces visible. D, A similar surface in the Nagaur Sandstone, illustrating small (white oval), circular (white square), and Treptichnus-type trace fossils. Lines in B and D illustrate the difference between connected (black) and unconnected (white) mark-up strategies of larger horizontal trails. E, Shibantan Streptichnus specimen with the radiating branches. F, Rusophycus from the Nagaur Group.

Figure 4

Figure 5. The mark-up process. A, The Shibantan surface. B, The surface with the area marked up in red, the large ichnotaxon in black, and the small ichnotaxon in green. C, Close-up of area showing the details of how the large and small ichnotaxa were marked up. D, Close-up area showing the midpoints of each trace segment.

Figure 5

Table 1. Summary metrics for the spatial heterogeneity and segment lengths of analyzed trace fossils. The H-W (Hosking and Wallis) test assesses whether the traces are significantly nonhomogeneous; LH* is a relative measure of heterogeneity; Lévy μ is the parameter for Lévy distributions, where μ = 2.71 is considered an optimal foraging strategy; normality test is the Shapiro-Wilk test to determine whether the segment length distributions are normally distributed.

Figure 6

Figure 6. Density plots and spatial distributions of ichnotaxa given by pair correlation functions (PCFs) of trace fossil midpoints. Density maps and corresponding PCF plots are shown in pairs. A, B, Shibantan large ichnotaxon (PCF: solid line, connected; dashed line, unconnected). C, D, Nagaur large ichnotaxon (PCF: solid line, connected; dashed line, unconnected). E, F, Shibantan small ichnotaxon. G, H, Nagaur small ichnotaxon. I, J, Nagaur circular ichnotaxon (PCF of large connected ichnotaxon is plotted for comparison). K, L, Nagaur arthropod traces. M, N, Shibantan bivariate distribution between large connected and small ichnotaxa. O, P, Nagaur bivariate distribution between large connected and small ichnotaxa. Scale bar next to density map is percent coverage, with range depending on the ichontaxon. PCF plots: blue lines, Shibantan; purple, Nagaur; gray area, 999 Monte Carlo simulations with a 5% threshold. PCF > 1 is aggregation; PCF < 1 is segregation; and PCF = 1 is random.

Figure 7

Figure 7. Shibantan data are presented in the top two rows (A–F), Nagaur data in the bottom two rows (G–L). First (A–C) and third (G–I) rows are histograms of segment lengths, and second (D–F) and fourth (J–L) rows are rose diagrams of segment orientations. The three columns are for small ichnotaxon (A, D, G, J), large (unconnected) ichnotaxon (B, E, H, K), and large connected ichnotaxon (C, F, I, L), respectively.

Figure 8

Figure 8. Mark correlation functions (MCFs) of spatial patterns of the lengths (A–D) and orientations (E–H) of traces. MCF < 1 is aggregation; MCF > 1 is segregation; and MCF = 1 is random. Blue lines are for the Shibantan and purple for Nagaur. For the large ichnotaxon, solid lines are the connected traces and dashed lines are unconnected.

Figure 9

Table 2. Bimodal orientation distributions of the trace orientations.