Recent Criticisms

In the past few years, a surge of studies has renewed investigation into the properties of the TWFE estimator and the assumptions it requires to achieve causal identification. One group of work urges researchers to better understand TWFE models (and their assumptions) from a design-based perspective, with a focus on restrictions on treatment assignment mechanisms. For example, Imai and Kim (Reference Imai and Kim2019) point out that the strict exogeneity assumption not only implies the well-known no time-varying confounder requirement, but it also forbids a “feedback” effect from past outcomes to treatment assignment. Blackwell and Glynn (Reference Blackwell and Glynn2018) clarify that such an assumption is closely related to baseline randomization in which the treatment vector is generated prior to, or independent of, the realization of the outcome. Another body of work cautions researchers that the PT assumption, even in a simple $ 2\times 2 $ DID setting, is sensitive to functional form. For example, Kahn-Lang and Lang (Reference Kahn-Lang and Lang2020) emphasize the implicit functional form restrictions imposed by PT, encouraging researchers to justify it from a (quasi-)experimental perspective and address pre-treatment covariate imbalance. Roth and Sant’Anna (Reference Roth and Sant’Anna2023) point out that strong assumptions are needed for PT to be scale-independent, ensuring that a monotonic transformation of the outcome does not invalidate it. In practice, we find that many political science studies do not provide strong justification for strict exogeneity or PT.

A second body of research explores the implications of HTE with binary treatments within TWFE models (e.g., Athey and Imbens Reference Athey and Imbens2022; Borusyak, Jaravel, and Spiess Reference Borusyak, Jaravel and Spiess2024; Callaway and Sant’Anna Reference Callaway and Sant’Anna2021; de Chaisemartin and D’Haultfœuille Reference de Chaisemartin and D’Haultfœuille2020; Goodman-Bacon Reference Goodman-Bacon2021; Strezhnev Reference Strezhnev2018). Most of this literature assumes staggered adoption, but the insights from that setting are still relevant when there are treatment reversals. In Figure 1, we present two simplified examples for the staggered adoption and general settings. The left panel of Figure 1a represents outcome trajectories in line with standard TWFE assumptions, which not only include PT but also require that the treatment effect be contemporaneous and unvarying across units and over time. In contrast, the right panel portrays a scenario where PT holds, but the constant treatment effect assumption is not met. Various decompositions by the aforementioned researchers reveal that even under PT, when treatments begin at different times (such as in staggered adoption) and treatment effects evolve over time and vary across units, the TWFE estimand is generally not a convex combination of the individual treatment effects for observations subjected to the treatment. The basic intuition behind this theoretical result is that TWFE models use post-treatment data from units who adopt treatment earlier in the panel as controls for those who adopt the treatment later (e.g., Goodman-Bacon Reference Goodman-Bacon2021). HTE-robust estimators capitalize on this insight by avoiding these “invalid” comparisons between two treated observations.

Figure 1.

Toy Examples: TWFE Assumptions Satisfied vs. Violated

Note: The above panels show outcome trajectories of units in a staggered adoption setting (a) and in a general setting (b). Solid and hollow circles represent observed outcomes under the treatment and control conditions during the current period, respectively, while triangles represent counterfactual outcomes (in the absence of the treatment across all periods), $ {Y}_{i,t}({d}_i=0) $ . The data on the left panels in both (a) and (b) are generated by DGPs that satisfy TWFE assumptions while the data on the right are not. The divergence between hollow circles and triangles in the right panel of (b), both of which are under the control condition, is caused by anticipation or carryover effects.

A third limitation of the canonical TWFE specification is its presumption of no temporal and spatial interference. In most uses of TWFE models, researchers assume that there are no spatial spillovers and that treatment effects occur contemporaneously, hence no anticipation or carryover effects. No anticipation effects means that future treatments do not affect today’s potential outcomes, while no carryover effects means that today’s treatment does not affect future potential outcomes: For any $ i,t $ ,

$$ \begin{array}{lll}(\mathrm{No}\ \mathrm{anticipation}\ \mathrm{effects})\hskip2em & & \\ {}\hskip2em {Y}_{i,t}({\mathbf{d}}_i)={Y}_{i,t}({d}_{i,1},{d}_{i,2},\dots, {d}_{i,t}),& & \\ {}(\mathrm{No}\ \mathrm{carryover}\ \mathrm{effects})\\ {}\hskip2em {Y}_{i,t}({\mathbf{d}}_i)={Y}_{i,t}({d}_{i,t},{d}_{i,t+1}\dots, {d}_{i,T}),& & \end{array} $$

in which $ {\mathbf{d}}_i=({d}_{i,1},{d}_{i,2},\dots, {d}_{i,T}) $ is unit i’s vector of potential treatment conditions in all periods (from period $ 1 $ to T) and $ {Y}_{i,t}({\mathbf{d}}_i) $ is the potential outcome in period t given $ {\mathbf{d}}_i $ . The TWFE model specified in Equation 1 satisfies these two assumptions because $ {Y}_{i,t}({\mathbf{d}}_i)={Y}_{i,t}({d}_{i,t}) $ . These assumptions are obviously very strong, but they are rarely questioned or tested in practice (Athey and Imbens Reference Athey and Imbens2022; Imai and Kim Reference Imai and Kim2019; Wang Reference Wang2021). Although some recent methods permit arbitrary carryover effects in staggered adoption settings, these effects are not distinguishable from contemporaneous effects.Footnote ⁶ This limitation becomes more complex when treatment reversal is possible, as demonstrated in Figure 1b. In Figure 1b, data in the left panel are consistent with TWFE assumptions, while the right panel illustrates deviations from PT, constant treatment effect, and the absence of anticipation or carryover effects. Real-world data often encounter the challenging scenarios depicted in the right panel rather than the idealized conditions in the left. Scholars have proposed methods to handle limited carryover effects in the general setting (IKW Reference Imai, Kim and Wang2023; LWX Reference Liu, Wang and Yiqing2024). The challenge of addressing spatial spillover effects without strong structural assumptions still persists (Wang et al. Reference Wang, Samii, Chang and Aronow2025; Wang Reference Wang2021), but its resolution is beyond the scope of this article.

Causal Estimands

To define the estimands clearly, consider the panel setting where multiple units $ i\in \{1,\dots, N\} $ are observed at each time period $ t\in \{1,\dots, T\} $ . Each unit-time pair $ (i,t) $ uniquely identifies an observation. Define $ {E}_{i,t} $ as unit i’s “event time” at time t. For each i, let $ {E}_{i,t}=\max \{{t}^{\prime }:{t}^{\prime}\le t,{D}_{i,{t}^{\prime }}=1,{D}_{i,{t}^{\prime }-1}=0\} $ if $ \exists s\le t:{D}_{i,s}=1 $ , and $ {E}_{i,t}=\min \{{t}^{\prime }:{D}_{i,{t}^{\prime }}=1,{D}_{i,{t}^{\prime }-1}=0\} $ otherwise. That is to say, $ {E}_{i,t} $ is the most recent time at which unit i switched into treatment or, if i has not yet been treated at any point up until time t, the first time i switches into treatment. If i is never treated, we let $ {E}_{i,t}=\infty $ . In the staggered setting, the event time for each unit is constant, $ {E}_i={E}_{i,t} $ , and $ {D}_{i,t}=1\left\{t\ge {E}_{i,t}\right\} $ , where $ 1\left\{\cdot \right\} $ is the indicator function. In such settings, we can partition units into distinct “cohorts” $ g\in \{1,\dots, G\} $ according to the timing of treatment adoption $ {E}_i $ . Units transitioning to treatment at period g ( $ i:{E}_{i,t}=g $ ) form cohort g, whereas units that never undergo treatment belong to the “never-treated” cohort ( $ i:{E}_{i,t}=\infty $ ). $ {Z}_{i,t} $ ( $ {Z}_{i,g,t} $ ) represents the variable Z for unit i (part of cohort g) at time t. We use $ {Y}_{i,t}(1) $ and $ {Y}_{i,t}(0) $ to denote the potential outcomes under treatment and control, respectively, and $ {Y}_{i,t}={D}_{i,t}{Y}_{i,t}(1)+(1-{D}_{i,t}){Y}_{i,t}(0) $ to denote the observed outcome.Footnote ⁷

The finest estimand is the individual treatment effect, $ {\tau}_{i,t}={Y}_{i,t}(1)-{Y}_{i,t}(0) $ , of which there exists one for each observation $ (i,t) $ .Footnote ⁸ Most political science research, however, typically focuses on estimating a single summary statistic. Commonly, this is the ATT, which represents individual treatment effects averaged over all observations exposed to the treatment condition. In between these extremes of granularity and coarseness are time-varying dynamic treatment effects, which are across-unit averages of individual treatment effects at each time period relative to treatment adoption. In the staggered adoption setting, we can further subdivide by cohort. We use $ {\tau}_l $ ( $ {\tau}_{g,l} $ ) to denote the dynamic treatment effect l periods after treatment adoption (for treatment cohort g), with $ l=1 $ representing the period immediately after treatment adoption.Footnote ⁹ $ {\tau}_{g,l} $ is also what some authors refer to as a cohort average treatment effect on the treated (Strezhnev Reference Strezhnev2018; Sun and Abraham Reference Sun and Abraham2021) or group-time average treatment effect (Callaway and Sant’Anna Reference Callaway and Sant’Anna2021).

Each of the estimators we discuss can be used to estimate $ {\tau}_l $ . The outcome model analogous to TWFE for estimating dynamic effects is a lags-and-leads specification. For simplicity, we first describe the staggered setting. Let $ {K}_{i,t}=(t-{E}_{i,t}+1) $ be the number of periods until (when $ {K}_{i,t}\le 0 $ ) or since unit i’s event time at time t (e.g., $ {K}_{i,t}=1 $ if unit i switches into treatment at time t). Consider a regression based on the following specification:

(2) $$ \begin{array}{l}{Y}_{i,t}={\alpha}_i+{\xi}_t+{X}_{i,t}^{\prime}\beta +{\displaystyle \sum_{\begin{array}{c}l=-a\\ {}l\ne 0\end{array}}^b}{\tau}_l^{TWFE}\cdot 1\left\{{K}_{i,t}=l\right\}\\ {}\hskip2em +\hskip.3em {\tau}_{b+}^{TWFE}1\left\{{K}_{i,t}>b\right\}\cdot {D}_{i,t}+{\varepsilon}_{i,t},& \end{array} $$

where a and b are the number of lag and lead terms (BJS Reference Borusyak, Jaravel and Spiess2024). In the social science literature, the typical practice is to exclude $ l=0 $ , which corresponds to the time period immediately before the transition into the treatment phase, and use it as a reference period (Roth Reference Roth2022). Conventionally, $ {\widehat{\tau}}_l^{TWFE} $ is interpreted as an estimate of $ {\tau}_l $ or as a meaningful weighted average of pertinent individual treatment effects. Meanwhile, $ {\widehat{\tau}}_{b+}^{TWFE} $ is viewed as an estimate for the long-term effect.

Summary of HTE-Robust Estimators

Table 1 summarizes the estimators we discuss in this article. The primary difference resides in the mechanics of their estimation strategies: there are methods based on canonical DIDs and methods based on imputation. We refer to the former as DID extensions and the latter as imputation methods. DID extensions use dynamic treatment effects, estimated from local, $ 2\times 2 $ DIDs between treated and control observations, as building blocks. Imputation methods use individual treatment effects, estimated as the difference between an imputed outcome under control and the observed outcome (under treatment), as building blocks. The imputation estimator we use in this article employs TWFE, fitted with all observations under the control condition, to impute treated counterfactuals. Different strategies also entail different assumptions. Each DID extension, for example, relies on a particular type of PT assumption, whereas imputation methods presuppose a TWFE model for untreated potential outcomes and require a zero mean for the error terms, which is implied by strict exogeneity.

Table 1.

Summary of HTE-Robust Estimators

Another noteworthy difference lies in the settings in which these estimators are applicable: some estimators can only be used in settings with staggered treatment adoption, while others can accommodate treatment reversals. In the latter setting, all estimators we discuss also require no anticipation and no or limited carryover effects. Furthermore, the estimators diverge in terms of (1) how they select untreated observations as controls for treated units, (2) how they incorporate pre-treatment or exogenous covariates, and (3) the choice of the reference period. We discuss these details further below and in Section A.1 of the SM.

DID Extensions

DID extensions are all built from local, $ 2\times 2 $ DID estimates. The overarching strategy for these estimators is to estimate the dynamic treatment effect, $ {\tau}_l $ (or $ {\tau}_{g,l} $ for each cohort g in the staggered setting), for each period since the most recent initiation of treatment, l, using one or more valid $ 2\times 2 $ DIDs. By “valid,” we mean that the DID includes (1) a pre-period and a post-period and (2) a treated group and a comparison group. The pre-period is such that all observations in both groups are in control, whereas the post-period is such that observations from the treated group are in treatment and those from the comparison group are in control. The choice of the comparison group is the primary distinction between estimators in this category. To obtain higher-level averages such as the ATT, we then average over our estimates of $ {\tau}_l $ (or $ {\tau}_{g,l} $ ), typically employing appropriate, convex weights.

Three estimators in this category are appropriate only for the staggered setting. Sun and Abraham (Reference Sun and Abraham2021) propose an interaction-weighted (IW) estimator, which is a weighted average of $ {\tau}_{g,l} $ estimates obtained from a TWFE regression with cohort dummies fully interacted with indicators of relative time to the onset of treatment. They demonstrate that, in a balanced panel, each resulting estimate of $ {\tau}_{g,l} $ can be characterized as a difference in the change in average outcome from a fixed pre-period $ s<g $ to a post-period l periods since g between the treated cohort g and the comparison cohort(s) in some set $ \mathcal{C} $ . The authors recommend using $ \mathcal{C}={\sup}_i{E}_i $ , which is either the never-treated cohort or, if no such cohort exists, the last-treated cohort. By default, IW uses $ l=0 $ as the reference period and can accommodate covariates in the TWFE regression.

Employing the same general approach, Callaway and Sant’Anna (Reference Callaway and Sant’Anna2021) propose two estimators, one of which uses never-treated units ( $ {\widehat{\tau}}_{nev}^{CS} $ ) and the other not-yet-treated units ( $ {\widehat{\tau}}_{ny}^{CS} $ ) as the comparison group. We label these estimators collectively as CSDID. Note that $ {\widehat{\tau}}_{nev}^{CS} $ uses the same comparison group as IW when a never-treated cohort exists,Footnote ¹⁰ whereas $ {\widehat{\tau}}_{ny}^{CS} $ uses all untreated observations of not only never-treated units but also later adopters as controls for earlier adopters. Besides the choice of comparison cohort, CSDID estimators differ from IW in that they allow users to condition on pre-treatment covariates using both an explicit outcome model and inverse probability weighting simultaneously; consistency of the estimators requires at least one of these to be correct. By default, both IW and CSDID use the period immediately before the treatment’s onset as the reference period for estimating the ATT.

Stacked DID, first formally introduced by Cengiz et al. (Reference Cengiz, Arindrajit, Lindner and Ben2019), is another related estimator sometimes used to address HTE concerns. As described by Baker, Larcker, and Wang (Reference Baker, Larcker and Wang2022), it involves creating separate sub-datasets for each treated cohort by combining data from that cohort (around treatment adoption) and data from the never-treated cohort from the same periods. These cohort-specific datasets are then “stacked” to form a single dataset. An event-study regression akin to Equation 2 with the addition of sub-dataset specific unit and time dummies is then run. This method uses the same comparison group as IW and the never-treated version of CSDID without covariates, but stacked DID estimates a single dynamic treatment effect for a given relative period rather than separate estimates for each cohort. Essentially, stacked DID is a special case of IW that uses immutable weights selected by OLS. We denote the corresponding estimand $ {\tau}_l^{vw} $ to reflect the fact that it is variance-weighted. These weights are generally neither proportional to cohort sizes nor guaranteed to sum to one (Wing, Freedman, and Hollingsworth Reference Wing, Freedman and Hollingsworth2024). Thus, while stacked DID avoids the “negative weighting” problem and meets our criteria for HTE-robustness, its estimands are not the same as $ {\tau}_l $ or the ATT.

In settings with treatment reversals, separate groups of researchers have converged on the same strategy for choosing a comparison group: matching treated and control observations that belong to units with identical treatment histories. IKW (Reference Imai, Kim and Wang2023) suggest one such estimator, PanelMatch, which begins by constructing a “matched set” for each observation $ (i,t) $ such that unit i transitions into treatment at time t. This matched set includes units that both (1) are not under treatment at time t and (2) share the same treatment history as i for a fixed number of periods leading up to the treatment onset. For each treated observation $ (i,t) $ and for every post-period $ (t+l-1) $ such that unit i is still under treatment, it then estimates a local DID using the same pre-period $ s<t $ . The treatment “group” comprises solely observation $ (i,t) $ , and the members of the matched set for $ (i,t) $ that are still under control during $ t+l-1 $ serve as the comparison group. To obtain $ {\tau}_l $ for a given l, it then averages over the corresponding local DID estimates from all treated observations. IKW (Reference Imai, Kim and Wang2023) propose incorporating covariates by “refining” matched sets and use $ l=0 $ as the reference period.

Using a similar strategy, de Chaisemartin and D’Haultfœuille (Reference de Chaisemartin and D’Haultfœuille2020) propose a “multiple DID” estimator, DID_multiple. A notable difference is that they include local DIDs for units leaving the treatment and not just those joining the treatment; when there are no treatment reversals or covariates, DID_multiple is a special case of PanelMatch. The original proposal for DID_multiple also only considers the case where we match on a single period and where $ l=1 $ , but since it has been extended (de Chaisemartin and D’Haultfoeuille Reference de Chaisemartin and d’Haultfoeuille2024). Consequently, the target estimand is not the ATT but rather an average of the contemporaneous effects of “switching” (i.e., the effect of joining or the negative of the effect of leaving at the time of doing so). In the staggered setting, the PanelMatch estimator aligns with the not-yet-treated version of CSDID (without covariate adjustment). We delve into details on the connections between these three estimators in the SM.

All DID extensions are built using local, $ 2\times 2 $ DIDs, and their assumptions reflect this. Specifically, they each rely on a form of the PT assumption—that is, the expected changes in untreated potential outcomes from one period to the other are equal between the treated and the chosen comparison groups. We defer readers to the SM for a fuller account of each method’s assumptions.

The Imputation Method

Imputation estimators do not explicitly estimate local DIDs. Instead, they take the difference between the observed outcome and an imputed counterfactual outcome for each treated observation. The connection to the TWFE model is in the functional form assumption used to impute counterfactual outcomes. Specifically, an imputation estimator first fits a parametric model for the potential outcome under control $ {Y}_{i,t}(0) $ —in our case, $ {Y}_{i,t}(0)={X}_{i,t}^{\prime}\beta +{\alpha}_i+{\xi}_t+{\varepsilon}_{i,t} $ —using only control observations $ \{(i,t):{D}_{i,t}=0\} $ . It is also through this outcome model that one can adjust for time-varying covariates. Then, it imputes $ {Y}_{i,t}(0) $ for all treated observations $ \{(i,t):{D}_{i,t}=1\} $ using the estimated parameters. Finally, it estimates the individual treatment effect, $ {\tau}_{i,t} $ , for each treated observation $ (i,t) $ by calculating the difference between the observation’s observed outcome $ {Y}_{i,t}={Y}_{i,t}(1) $ and its imputed counterfactual outcome $ {\hat{Y}}_{i,t}(0) $ . Inference for the estimated $ {\widehat{\tau}}_{i,t} $ is possible, although uncertainty estimates need to be adjusted to account for the presence of idiosyncratic errors (e.g., Bai and Ng Reference Bai and Ng2021). BJS (Reference Borusyak, Jaravel and Spiess2024) and LWX (Reference Liu, Wang and Yiqing2024) each propose estimators in this category. Each article proposes a more general framework that nests many models, including TWFE. The latter also introduces several specific imputation estimators, one of which uses the TWFE model, and the authors refer to the resulting estimator as the fixed effects counterfactual estimator, or FEct.

Although DID extensions and imputation methods rely on slightly different identification assumptions, these assumptions usually lead to similar observable implications. Researchers commonly use the presence or absence of pretrends to judge how plausible the PT assumption is. In the classic two-group setting, if there are data from multiple pre-treatment periods, researchers can plot the time series of average outcomes of each group and visually inspect whether they indeed trend together. The intuition is that if PT holds and the average outcome trends of the treated and control groups are indeed parallel in pre-treatment periods when $ Y(0) $ ’s are observed for all units, then it is plausible that PT also holds in the post-treatment periods, when $ Y(0) $ ’s are no longer observable for units in the treatment group. Conversely, differential trends in the pre-treatment periods should make us suspicious of PT. In more complex settings or where we wish to control for observed confounders, researchers often use dynamic estimates before and after the onset of treatment, $ {\tau}_l $ , to construct so-called “event-study plots” to judge the presence of pretrends. If PT holds, then pre-treatment dynamic estimates should be around zero. We provide a more thorough discussion and an example of the event-study plot in the next section when we introduce our procedure.

Choice of Estimators

In general, we believe the credibility of identifying assumptions is more important than the choice of estimator. After all, in the staggered setting, when assumptions hold, IW, CSDID, DID_multiple, PanelMatch, and the imputation estimator all converge to the same or a similar estimand. However, there are a few reasons to favor the imputation estimator. First, it can handle complex settings, including those with treatment reversal—which account for over half of the studies in our sample—and can accommodate time-varying covariates, additional fixed effects, and unit- or group-specific time trends commonly seen in social science research. The imputation estimator connects to TWFE through a shared outcome model, and thus any of the aforementioned modifications to the outcome model can be directly mirrored. DID extensions relate to TWFE through their shared connection to DID in the two-group, two-period setting. Classic DID’s inability to naturally accommodate these complexities limits DID extensions on this front. Just like TWFE, the imputation estimator risks misspecification bias, and adding more redundant terms may significantly increase variance. However, we still consider the added flexibility to be an advantage. Second, imputation estimators are the most efficient under homoskedastic errors (BJS Reference Borusyak, Jaravel and Spiess2024).Footnote ¹¹ Moreover, by using the average of all pre-treatment periods as the reference point rather than a single pre-period, as the default in DID extensions, they provide greater power in hypothesis testing for pretrends. The main drawback of imputation estimators is that their current implementations (either FEct or DID_impute) do not allow for automated adjustment of time-invariant covariates, an advantage offered by CSDID and PanelMatch. Adjusting for pre-treatment characteristics can improve credibility of research, as conditional PT may be more plausible than the unconditional one (Sant’Anna and Zhao Reference Sant’Anna and Zhao2020).

Data

Our replication sample comprises studies from three leading political science journals, APSR, AJPS, and JOP, published over a recent 7-year span from 2017 to 2023. We initially include all studies, including both long and short articles, that employ panel data analyses with a binary treatment as a key component of their causal argument, resulting in a total of 102 studies. After a careful review, as explained in Footnote footnote 1, we find that 64 studies employ a TWFE model similar to Equation 1. We then attempt to replicate the main results of these 64 studies and are successful in 49 cases (76.6%). Though a significant proportion of studies failed to replicate, we note that the success rate is still higher than that of Hainmueller, Mummolo and Xu (Reference Hainmueller, Mummolo and Xu2019) at 55% and Lal et al. (Reference Lal, Lockhart, Yiqing and Ziwen2024) at 67%. We credit this to the new replicability standards set by journals. A detailed explanation of how we select the “main model” is provided in Section A.3 of the SM. Table 2 depicts the distribution of successful replications, along with reasons for replication failures, across the various journals.

Table 2.

Sample Selection and Replicability of Qualified Studies

Settings and Common Practices

Table 3 presents an overview of the standard practices and settings in the studies that we successfully replicated. The majority of studies in our sample (67.3%) use the DID design/method/approach to justify the use of the TWFE model, while the remaining studies advocate for the model’s ability to exploit “within” variations in the data. Out of the 49 studies, nine (18.4%) employ a classic block DID setting, which includes two-group, two-period designs (three studies) and multi-period block DID designs (six studies). Thirteen studies (26.5%) use a staggered DID design, while the remaining 27 studies (55.1%) fall into the “general” category, meaning they allow for treatment reversals. Except for five, all studies feature a continuous outcome of interest. Most use cluster-robust SEs or panel-corrected SEs (Beck and Katz Reference Beck and Katz1995), and eight studies employ bootstrap procedures for estimating uncertainties. A subset of studies explore alternative model specifications by adding lagged dependent variables (eight studies), unit-specific linear time trends (fifteen studies), and higher-than-unit-level time trends (one study). Notably, 32 studies use some type of visual inspection—either average outcomes over time, event-study plots, or both—to evaluate the plausibility of PT. Four studies published in 2023 (33%) employ HTE-robust estimators, compared to none before 2023, indicating rapid adoption of these methods. Of these, two use CSDID, one PanelMatch, and one the imputation estimator.

Table 3.

Settings and Common Practice

Procedure

We use data from Grumbach and Sahn (Reference Grumbach and Sahn2020) to illustrate our process for replication and reanalysis. The authors investigate coethnic mobilization by minority candidates during U.S. congressional elections. To simplify our analysis, we focus on the impact of the presence of an Asian candidate on the proportion of general election contributions from Asian donors. To begin, we aim to understand the research setting and data structure. We visualize the patterns of treatment and outcome variables using plots, which are shown in the SM. In this application, treatment reversals clearly take place. Some data are missing (due to redistricting), but the issue does not seem to be severe. We record important details such as the number of observations, units, and time periods, the type of variance estimator, and other specifics of the main model. Next, we replicate the main finding, employing both the original variance estimator and a cluster-bootstrap procedure.

We then re-estimate the ATT and dynamic treatment effects using estimators discussed in the previous section. For staggered adoption treatment cases, we apply seven estimators: TWFE (with always treated units removed for easier comparisons with other estimators), the imputation estimator (FEct), PanelMatch, DID_multiple, StackedDID, IW, and CSDID (both not-yet-treated and never-treated versions). For applications with treatment reversals like Grumbach and Sahn (Reference Grumbach and Sahn2020), we use the first three estimators only.Footnote ¹² The comparison between the TWFE estimate and the other estimates sheds light on whether original findings are sensitive to relaxing the constant treatment effect assumption. Figures 2a–d show the main results from this example. The similarity between estimates for the ATT in panel a suggests that the original finding is robust to the choice of estimators. The event-study plots from HTE-robust estimators in panels c and d are broadly consistent with the event-study plot from TWFE in panel b.

Figure 2.

Reanalysis of Grumbach and Sahn (Reference Grumbach and Sahn2020)

Note: Reanalysis of data from Grumbach and Sahn (Reference Grumbach and Sahn2020). (a) Treatment effect or ATT estimates from multiple methods. (b–d) Event-study plots using TWFE, PanelMatch, and the imputation estimator (FEct). (e,f) Results from the placebo test (and robust confidence set) and test for carryover effects using FEct—the blue points in (e) and red points in (f) represent the holdout periods in the respective tests. In (e), the green and pink bars represent the 95% robust confidence sets when $ \overline{M}=0 $ and $ \overline{M}=0.5 $ , respectively. CIs in all subfigures—excepted for the reported estimate in (a)—are produced by bootstrap percentile methods.

Next, we conduct diagnostic tests based on the imputation estimator, including the F test and the placebo test, to further assess the plausibility of PT and, in applications with treatment reversal, the no-carryover-effect assumption. We use the imputation estimator because it is applicable across all studies in our replication sample, can incorporate time-varying covariates, and remains highly efficient. Figures 2d–f show the results from the F test, placebo test, and test for no carryover effects on our running example, respectively. Both a visual inspection and the formal tests suggest that PT and no-carryover-effect assumptions are quite plausible.

Finally, we compute the robust confidence sets proposed by Rambachan and Roth (Reference Rambachan and Roth2023), which account for potential PT violations when testing the null hypothesis of no post-treatment effect. Specifically, we employ the relative magnitude restriction, with two modifications to accommodate the imputation method. First, we use estimates from the placebo test to ensure that benchmark pre-treatment estimates are obtained using the same approach as post-treatment ATT estimates. This alignment prevents potential asymmetry in testing and treatment effect estimation (Roth Reference Roth2024). Second, since the imputation method does not rely on a single reference period, we explicitly incorporate the placebo estimate from the last pre-treatment period ( $ {\widehat{\delta}}_0 $ ) to account for deviations of post-treatment estimates from earlier reference periods. Mathematically, we decompose each dynamic estimate, $ {\mu}_t $ , into the true treatment effect, $ {\tau}_t $ , and a trend (bias) component, $ {\delta}_t $ , such that: $ {\mu}_t={\tau}_t+{\delta}_t $ . Our modified relative magnitude restriction then requires that, for all $ t\ge 0 $ ,

(3) $$ \begin{array}{rl}\left|\right.{\delta}_{t+1}-{\delta}_t\left|\right.\le \overline{M}\cdot \underset{\hskip0.3em s\in \mathcal{P}\setminus \{0\}}{\max}\left|\right.{\delta}_{s+1}-{\delta}_s\left|\right.,& \end{array} $$

where $ \mathcal{P} $ is the set of placebo periods. In our application, we set $ \mathcal{P}=\{-2,-1,0\} $ , so the maximum violation among placebo periods is: $ \max \hskip0.3em \left\{\right.\left|\right.{\delta}_0-{\delta}_{-1}\left|\right.,\hskip2.77695pt \left|\right.{\delta}_{-1}-{\delta}_{-2}\left|\right.\left\}\right.. $

When $ \overline{M}=0 $ , the relative magnitude restriction reported in Equation 3 implies that $ {\delta}_t={\delta}_0 $ for all $ t>0 $ , meaning that the PT violation remains fixed at the same level as in the last pre-treatment placebo period. In this case, the robust confidence set obtained at $ \overline{M}=0 $ acts as a debiased confidence interval, using the placebo estimate from the last pre-treatment period as the benchmark for bias. Allowing $ \overline{M}>0 $ permits PT violations to vary over time, but constrains the change in magnitude of violations between consecutive post-treatment periods to remain within $ \overline{M} $ times the largest consecutive discrepancy observed during the placebo periods.

Rambachan and Roth (Reference Rambachan and Roth2023, 2653) suggest using $ \overline{M}=1 $ as a “natural benchmark” when the number of placebo periods is roughly equal to the number of post-treatment periods, treating any potential PT violations as no worse than those already observed.Footnote ¹³ In our reanalysis, we first construct 95% robust confidence sets for each post-treatment dynamic effect and the ATT at $ \overline{M}=0 $ and $ \overline{M}=0.5 $ . Figure 2e illustrates these robust confidence sets for the estimated ATT using the imputation method. The center of the robust confidence sets is smaller than the point estimate because $ {\widehat{\delta}}_0>0 $ . If the confidence sets for $ \overline{M}=0 $ does not include zero, as in this case, we conduct a sensitivity analysis by varying $ \overline{M} $ over a wider range to determine the “breakdown value” $ \overset{\sim }{M} $ , which is the smallest value of $ \overline{M} $ at which the robust confidence set first includes zero. In the case of Grumbach and Sahn (Reference Grumbach and Sahn2020), the breakdown value is $ \overset{\sim }{M}=2.5 $ , which means that the estimated coethnic mobilization effect remains statistically distinguishable from zero unless PT violations are more than 2.5 times the largest discrepancy observed during the placebo periods.

Overall, the results from Grumbach and Sahn (Reference Grumbach and Sahn2020) appear highly robust, regardless of the choice of point and variance estimators. The PT and no-carryover-effect assumptions seem plausible. The study also has sufficient power to distinguish the ATT from zero, even under potential, realistic PT violations.

HTE-Robust Estimators Yield Qualitatively Similar but Highly Variable Estimates

To examine the impact of the weighting problem caused by HTE associated with TWFE models, we first compare the estimates obtained from the imputation estimator, FEct, for all studies to those originally reported. We choose the imputation estimator for the reason mentioned earlier. Most importantly, it is applicable to all studies in our sample, including those with treatment reversals and those with additional time trends. Figure 3 plots the comparison. The horizontal axis represents the originally reported TWFE estimates, and the vertical axis represents FEct estimates, both normalized using the same set of originally reported SEs. If the point estimates are identical, then the corresponding point should lie exactly on the 45-degree line. Red triangles represent studies where the imputation estimates are statistically insignificant at the 5% level, based on cluster-bootstrapped SEs.

Figure 3.

TWFE vs. The Imputation Estimator: All Cases

Note: The above figure compares reported TWFE coefficients with imputation method (FEct) estimates. Both estimates for each application are normalized by the same reported TWFE SE. Fouirnaies and Hall (Reference Fouirnaies and Hall2018) and Hall and Yoder (Reference Hall and Yoder2022) are close to the 45-degree line but are not included in the figure as their TWFE z-scores exceed 15. Black circles (red triangles) represent studies whose imputation method estimates for the ATT are statistically significant (insignificant) at the 5% level, based on cluster-bootstrapped SEs. The top-left (bottom-right) corners display histograms of the ratio of point (SE) estimates based on the imputation method and TWFE. These plots show that changes in point estimates, combined with the efficiency loss from using the imputation method, contribute to the loss of statistical significance in some studies.

We observe several patterns. First, TWFE coefficients are statistically significant at the 5% level in all but one study, and the absolute values of z-scores for a significant minority of studies cluster around $ 1.96 $ , indicating possibly a file-drawer problem and potential publication bias. Second, the points largely follow the 45-degree line, with the imputation estimates always having the same sign as the original estimates. This suggests that while scenarios where accounting for HTE completely reverses the empirical findings are theoretically possible, they are rare.

However, results sometimes deviate significantly. In the top left corner of Figure 3, we plot the histogram of the ratio of imputation to TWFE estimates. Although the mean and median of the ratio are close to one, at the extremes, we observe imputation estimates as small as one-fourth or as large as more than double the TWFE estimates. The most consequential deviations occur in studies that were originally near the margins of statistical significance. Additionally, we plot the ratio of SE estimates from the imputation method to TWFE in the bottom right corner of Figure 3. The median is 1.08, meaning that in the majority of cases the SE estimate from the imputation method is at least 8% larger than the SE from TWFE. The mean is 1.25, and the distribution is right-skewed; in the extreme, the ratio was almost as high as three. Combined, drops in point estimates and increases in uncertainty lead to the third pattern: When we switch from TWFE to the imputation estimator, the number of studies that are statistically insignificant at the 5% level increases from one to twelve (24%).

If we restrict our attention to eleven studies with staggered treatments, we can broaden our comparison set to include more HTE-robust estimators discussed earlier.Footnote ¹⁴ Figure 4 visually compares the points estimates (left panel) and z-scores (right panel). In the left panel, all point estimates are normalized by the same set of reported TWFE SEs for each study. In all but three studies, the estimates from all HTE-robust estimators share the same sign, though there is a noticeable amount of variation in the estimated effect size.Footnote ¹⁵

Figure 4.

Comparison of Estimates: The Staggered Setting

Note: The above figures compare reported TWFE coefficients with estimates from various alternative estimators. In the left panel, all eight estimates for each application are normalized by the same reported SE to highlight changes resulting from the use of alternative estimators. In the right panel, the estimates are divided by their respective bootstrapped SEs. To facilitate visualization, we multiply all estimates by the sign of the reported coefficient. In both figures, black (red) symbols represent estimates that would be statistically significant (insignificant) at the 5% level, assuming they were treated as z-scores. The normalized CSDID (never treated) estimate for Kuipers and Sahn (Reference Kuipers and Sahn2023),−5.36, falls out of plotting area and is therefore not shown in the left panel. Kogan (Reference Kogan2021) and Magaloni, Franco-Vivanco, and Melo (Reference Magaloni, Franco-Vivanco and Melo2020) are excluded because the authors’ original TWFE specifications include unit-specific linear time trends, which are not supported by most HTE-robust estimators except the imputation estimator. Some estimates are missing because of too few never-treated units. PanelMatch is excluded because it targets a different estimand.

As in Figure 3, TWFE does not appear to be systematically upward or downward biased compared to HTE-robust estimators. Another observation that carries over is that HTE-robust estimators generally require more power to reject the null hypothesis of no effect. In five of the eleven studies, at least four HTE-robust estimates per study are statistically insignificant. The left panel shows that the changes in point estimate alone are often sufficient to render the results statistically insignificant. The comparison of z-scores in the right panel highlights that increased uncertainties can be substantial. Combined with earlier evidence, these findings from the staggered cases suggest that the HTE issue regarding TWFE is empirically significant and warrants careful consideration by researchers.

It is worth noting that while only a small fraction of studies in our sample (eight studies, 16.3%) employ a bootstrap procedure to estimate SEs or CIs, the widely practiced cluster-robust SE typically performs adequately. This is because the number of units (clusters) is generally large, with a median of 317. However, ten studies have fewer than 50 units; among them, two studies that were significant at the 5% level using cluster-robust SEs fell below this threshold when using cluster-bootstrapped SEs, both of which were already marginally significant. We provide comparisons of reported, cluster-robust, and cluster-bootstrapped SEs in the SM.

Relaxing PT Renders Most Studies Unable to Reject the Null

Although the recent methodological literature has heavily focused on HTE, PT violations—long recognized as a potential pitfall—remain a primary concern in practice. In Figure 5, we present the event-study plot based on estimates from the imputation estimator for each study in our sample. We also report the ATT estimates and their bootstrapped SEs. Due to space limitations, we present the event-study plots from other estimators, as well as results from the placebo tests, robust confidence sets, and sensitivity analyses, in the SM.

Figure 5.

Event-Study Plots w/ Imputation Estimator

Note: We report the estimated ATT and corresponding bootstrap SEs (in parentheses) using FEct. For Skorge (Reference Skorge2023), we use an “exit” plot because all treated units receives the treatment in the first period.

What is concerning is that, in at least six studies (12%), the PT assumption seems highly implausible. In these studies, the dynamic estimates in the pre-treatment periods deviate substantially from zero compared with those in the post-treatment period, and the F test rejects the null.Footnote ¹⁶ For the remaining studies, the CIs of pre-treatment estimates mostly cover zero, and the F test and placebo test do not reject. However, this could be simply due to a lack of statistical power. Therefore, to assess the robustness of the findings, we need additional tools that simultaneously account for both the estimated pretrend and statistical power. The sensitivity analysis proposed by Rambachan and Roth (Reference Rambachan and Roth2023) addresses this issue. We conduct such an analysis with a modified relative magnitude restriction from Equation 3 for 42 studies that have at least three pre-treatment periods.Footnote ¹⁷

Figure 6a shows that when we construct a robust confidence set with $ \overline{M}=0.5 $ , the null hypothesis of no effect is rejected at the 5% level in only eight (19%) of the 42 studies. Many studies that were robust to HTE now appear underpowered. Figure 6b displays the distribution of breakdown values $ \overset{\sim }{M} $ . The spike at $ 0 $ consists of two types of studies: those that are statistically insignificant with the imputation estimator when three placebo periods are considered (dark gray) and those that become statistically insignificant due to debiasing using the placebo estimate $ {\widehat{\delta}}_0 $ . In other words, many results are not robust when we take into account $ {\widehat{\delta}}_0 $ even without a relative magnitude shift. Among the 42 studies, the median is close to 0 and the mean is 0.33. Focusing only on the studies that remain statistically significant with the imputation estimator, the median and mean are still as low as 0.10 and 0.47, respectively.

Figure 6.

Allowing PT Violations with Robust Confidence Sets

Note: The above figures present findings from the sensitivity analysis. The sample consists of 42 studies with more than three pre-treatment periods, allowing for such an analysis. Subfigure (a) displays the p-values of partially identified ATT estimates using the imputation method under restricted relative magnitude PT violations with $ \overline{M}=0.5 $ , compared to reported p-values for TWFE coefficients assuming PT. A square root scale is used to facilitate visualization. Black (red) triangles represent studies that are statistically significant (insignificant) at the 5% level when using the imputation method under PT. Subfigure (b) shows a histogram of $ \overset{\sim }{M} $ , the breakdown values of $ \overline{M} $ ; the dark gray bar represents studies whose ATT estimates are statistically insignificant at the 5% level when using the imputation method.

These results suggest that although most statistically significant findings are robust to the imputation estimator, in the vast majority of these studies, accounting for potential PT violations—even very mild ones based on estimated pretrends during the placebo periods—prevents us from rejecting the null. In other words, in most studies, the ATT estimates are not substantial enough to be differentiated from realistic PT violations or from estimation and sampling errors.

Other Issues

Our reanalysis highlights several additional issues. First, the presence of missing values is widespread. Although most methodological work presumes balanced panels without missing data, in reality, many empirical studies encounter varying degrees of data missingness. Substantial differences in results for estimators that are numerically identical in balanced panels suggest that such violations may have important implications. During replication, we generate plots that display the patterns of treatment status for each study (Mou, Liu, and Xu Reference Mou, Liu and Xu2023). Based on these plots, we also see that in some studies the pattern of missingness is either seemingly nonrandom or extremely prevalent, which weakens our confidence in the respective empirical findings.

Second, we perform tests for carryover effects for all studies with treatment reversals. If this test is rejected, it suggests that the treatment effects persist beyond the treatment periods. Among 27 studies, five reject the null hypothesis of no carryover effects at 5%. Part of the concern is that the imputation method and DID extensions will use control observations from previously treated units to fit the potential outcome model or as comparisons for treated observations, and if there are carryover effects, then the comparisons will become tainted. LWX (Reference Liu, Wang and Yiqing2024) note that the presence of carryover effects for a limited number of periods is less concerning, as researchers can recode treatment to persist for some time after a unit transitions out of treatment. Despite its prevalence, we observe that carryover effects do not substantially alter the findings in most studies. Specifically, in six studies that reject the null of no carryover effects, when we exclude two periods after the treatment switches back to zero, the ATT estimates remain similar in magnitude, and statistically significant results remain significant (Figure A8 in the SM). Nevertheless, we recommend that researchers make it a practice to check for potential carryover effects, considering the low cost of conducting such tests and adjustments.

Finally, many findings are sensitive to model specifications. Some studies that we exclude from our sample employ one-way fixed effects or fixed effects at a level different from that at which treatment is assigned. Many of these findings do not hold when we reanalyze them using a TWFE model. We should clarify that this does not imply that the original results are wrong; rather, these models implicitly operate under different identifying assumptions, and there is substantial variation in how much consideration authors give to this point. Some studies do not provide a rationale for their choice to use one-way fixed effects, while others explicitly outline the type of unobserved confounders they intend to control for. In one instance, the authors inaccurately label their specification as a DID design. The TWFE and DID estimators are generally not equivalent, and we emphasize that this difference becomes even more pronounced when fixed effects are not assigned at the level of treatment. In such cases, a TWFE specification does not correspond to even a broadly defined DID design.

Summary

In Table 4, we summarize the main findings of our reanalysis. The numbers represent the proportion of studies in a given journal or across all journals that fall under the respective category (hence, a smaller number is better). The first two rows relate to the ratio of the imputation estimate to the TWFE estimate, which proxies the consequences of the weighting problem due to HTE. Across all journals, this ratio is less than 0.8 in 18% of studies and less than 0.5 in 6% of studies, indicating that using an HTE-robust estimator does sometimes have a substantively significant impact and is important to use at least as a robustness check.

Table 4.

Summary of Findings

Note: Entries (except in the last column) are proportions of studies satisfying each set of conditions. A null is deemed rejected if $ p<0.05 $ . Five studies with a single pre-treatment period are not included in the summary statistics for the F test and placebo test. Seven studies are not included in the last two rows due to too few pre-treatment periods.

The third and fourth rows indicate the proportion of studies with evidence of PT violations based on the F test and placebo tests, respectively. Across all journals, around a quarter of studies reject the null hypothesis at the 5% level using the F test, with slightly fewer rejecting when using the placebo test due to the loss in power from excluding data from the placebo periods. Note, though, that failure to reject can result from insufficient power and is not sufficient to support that the PT holds.

The fifth and sixth rows display the proportion of studies in which the null hypothesis of no effect is not rejected using the TWFE and imputation estimators, respectively. When TWFE is employed, this occurs in only one study (2%); however, when the imputation estimator is used, this number increases to 24%, suggesting that many studies in our sample are potentially underpowered with an HTE-robust estimator. The last two rows show that in 50% and 81% of the studies, the robust confidence sets for the ATT include zero with $ \overline{M}=0 $ (debiasing only) and $ \overline{M}=0.5 $ (debiasing plus restricted relative magnitude in biases), respectively. The comparison of results in the last four rows highlights that the main source of fragility in the existing literature is potential PT violations, rather than concerns of HTE.

Our reanalysis is not meant to criticize existing studies, many of which were conducted before recent methodological advances. In fact, we have observed rapid adoption of these new methods and greater statistical power in more recently published studies. However, we want to emphasize two key points: (1) many studies do not adequately assess the plausibility of PT, the key identifying assumption of their research designs; and (2) given recent methodological developments, causal panel analysis under PT requires significantly more statistical power to account for HTE and potential PT violations than previously believed.

Research Design Is the Key

An important component of a strong research design is a clear understanding of how treatment is assigned. The PT assumption, which both TWFE models and most modern methods rely on, is silent on the assignment mechanism. As a result, many researchers assume that these methods can be applied when the assignment mechanism is unknown and that the absence of a pretrend is sufficient to make PT credible. Another perspective suggests that (quasi-)randomization is required for PT to be credible (e.g., Kahn-Lang and Lang Reference Kahn-Lang and Lang2020). Our view aligns more closely with the latter, but is less stringent. We argue that for PT to be credible, researchers must justify the following assumption:

$ {\Delta}_{s,t}{Y}_{i,t}(0)\perp \perp {D}_{i,t},\hskip0.3em \forall s,t, $

where $ {\Delta}_{s,t}{Y}_{i,t}(0)={Y}_{i,t}(0)-{Y}_{i,s}(0) $ is the before-and-after difference in untreated potential outcomes across any two periods (assuming no covariates, though this naturally extends to include them). This assumption is slightly stronger than PT, which only assumes mean independence, but is more intuitive. It demonstrates both the strength and limitation of causal panel analysis under PT: while the panel structure helps account for time-invariant unobserved confounding through before-and-after differences, the introduction of the treatment must act as a shock in so much as it is orthogonal to the evolution of untreated potential outcomes; hence, any dynamic relationships between past outcomes or covariates and treatment are ruled out. In other words, under PT, a strong causal panel design still requires some (quasi-)random element in treatment assignment. Importantly, the research design issues cannot be resolved simply by applying the novel estimators surveyed in this article.

Inspecting Raw Data Helps Spot Obvious Issues

The research design phase should also include inspection of the raw data. We encourage researchers to plot the data at hand to better understand patterns of the treatment status, missingness, and outliers (Mou, Liu, and Xu Reference Mou, Liu and Xu2023). Treatment status should vary both by unit and time. If the majority of variation occurs over time (across units) with little or no variation between units at any given time period (or across time within a given unit), the TWFE estimand will be likely dominated by impermissible comparisons and thus susceptible to larger biases. Moreover, HTE-robust estimators will estimate the treatment effect using very little data and thus be underpowered. Equally important is the need for researchers to understand the degree and possible origins of data missingness prior to initiating statistical analysis. If missingness does not seem to be random, or if it is too prevalent, leaving insufficient meaningful variation in the data, researchers should consider halting the analysis at this stage. Just as in the cross-sectional case, plotting the raw data can also help researchers to spot outliers and highly skewed distributions, which may require additional preprocessing. At this stage, researchers can also trim the data to make the units in comparison more similar in terms of pre-treatment or time-invariant covariates (Sant’Anna and Zhao Reference Sant’Anna and Zhao2020).

When Estimates Diverge, Understand Why

At the estimation stage, we recommend using at least one HTE-robust estimator alongside a benchmark TWFE model. While TWFE is often more efficient, its constant treatment effects assumption is too restrictive in many contexts. As shown in this article, TWFE does not produce systematic upward or downward bias compared to the imputation estimator, but it can severely bias causal estimates in individual cases. We recommend the imputation estimator in most settings primarily for its flexibility, though other estimators also have their advantages. The more critical question, however, is why results differ between estimators when they do. If TWFE and an HTE-robust estimator diverge, it could be due to HTE or PT violations. If HTE-robust estimators themselves diverge, it is often because the data are too sparse, leading to high variability, or the PT assumption fails differentially, causing estimators weighting control units differently to produce varying estimates. Plotting raw data and using diagnostics (such as the Goodman-Bacon decomposition) typically clarifies these issues. We also recommend keeping the benchmark TWFE model for its transparency.

For uncertainty estimates, researchers should use cluster-robust SEs when the number of clusters is large (e.g., exceeds $ 50 $ ) and opt for cluster-bootstrap or cluster-jackknife procedures when the number of clusters is relatively small. The clustering level should match the higher of either the time-series units or the level of treatment assignment. This follows the rule of thumb to cluster at the level of potential outcome input index, taking into account both treatment assignment and potential temporal spillover (Fu, Samii, and Wang Reference Fu, Samii and Wang2024). For novel HTE-robust estimators, cluster-bootstrap or jackknife is generally safer than relying on various analytical SEs. In the SM, we show that cluster-bootstrapped SEs are typically larger than analytically derived SEs for five HTE-robust estimators using data from our sample.

Conduct Diagnostics to Assess Key Assumptions and Robustness of Findings

With a clear research design, researchers should critically evaluate key identification assumptions and test the robustness of findings when these assumptions are violated. Event-study plots, available for TWFE and most HTE-robust estimators, are valuable tools for assessing whether the no-anticipation and PT assumptions hold. We recommend creating an event-study plot using the chosen estimator(s), followed by both visual inspection and statistical tests to assess how plausible the PT assumption is. Importantly, the absence of statistical significance in pretrend coefficients should not be taken as conclusive evidence for the validity of PT. To avoid the conditional inference problem, we recommend performing a sensitivity analysis with robust confidence sets across different values of $ \overline{M} $ , regardless of the pretest results. As shown in this article, such tests require more statistical power than rejecting the null that the average treatment effect is zero. Researchers should, therefore, allocate sufficient statistical power for these diagnostic tests during the research design phase.

Panel data provide valuable opportunities for social scientists to tackle complex causal questions; however, these data, especially when analyzed under PT, present distinct challenges. Our findings are not intended to dissuade researchers from employing PT-based research designs in causal panel analysis. Rather, our aim is to guide researchers in conducting their analyses more transparently and credibly. To facilitate this, we have integrated all the procedures described in this article into the open-source R package fect, and we offer detailed tutorials for these methods.