Introduction
Waterhemp [Amaranthus tuberculatus (Moq.) Sauer] is an economically important weed throughout much North America, particularly in southern Ontario (Benoit et al. Reference Benoit, Hedges, Schryver, Soltani, Hooker, Robinson, Laforest, Soufiane, Tranel, Giacomini and Sikkema2020; Costea et al. Reference Costea, Weaver and Tardif2005). Amaranthus tuberculatus is a troublesome weed in food and fiber crops due to the increasing incidence of the weed itself, increasing complexity of herbicide resistance, A. tuberculatus’s ability to reduce crop yield through competition, and increased input costs; growers are forced to employ integrated weed management strategies (Livingston et al. Reference Livingston, Fernandez-Cornejo and Frisvold2016; Orson Reference Orson1999). To date, A. tuberculatus in Ontario has evolved resistance to the acetolactate synthase inhibitor (Group 2), photosystem II inhibitor (Group 5), 5-enolpyruvylshikimate-3-phosphate synthase inhibitor (Group 9), and protoporphyrinogen oxidase (PPO) inhibitor (Group 14) herbicide sites of action, with some populations characterized with multiple herbicide–resistant (MHR) biotypes to all four groups (Heap Reference Heap2021).
The increasing geographic presence of A. tuberculatus and the evolution of MHR A. tuberculatus make control more difficult and expensive and may substantially impact yields of crops such as soybean [Glycine max (L.) Merr.]. Vyn et al. (Reference Vyn, Swanton, Weaver and Sikkema2007) documented up to 73% soybean yield loss in fields with high weed density (<1,000 plants m−2) due to A. tuberculatus interference, which equates to a loss of 2,200 kg ha−1 based on Ontario’s average soybean yield of 3,020 kg ha−1 (OMAFRA 2019). In dollar value, a soybean grower with an uncontrolled A. tuberculatus population could lose up to CAN$1,008 ha−1 based on the average Ontario weighted price of CAN$0.46 kg−1 in 2018 (GFO 2019).
Agronomic practices greatly influence the competitiveness and economic impact of A. tuberculatus on crops. Amaranthus tuberculatus control early in the season is vital for soybean growers to minimize yield loss from A. tuberculatus interference and maximize net economic returns. Utilizing a two-pass weed control program including an effective preemergence residual herbicide, followed by an effective postemergence herbicide to control cohorts of A. tuberculatus that emerge later, provides the most consistent MHR A. tuberculatus control in soybean (Schryver Reference Schryver2017; Vyn et al. Reference Vyn, Swanton, Weaver and Sikkema2007). Soil-applied herbicides are a valuable component of an overall MHR A. tuberculatus control strategy in soybean.
Flumioxazin, an N-phenylphthalimide herbicide with soil-residual and contact activity, inhibits PPO (Dayan and Duke Reference Dayan and Duke2010; Price et al. Reference Price, Pline, Wilcut, Cranmer and Danehower2004). Flumioxazin provides control of A. tuberculatus and other troublesome weeds in Ontario, including redroot pigweed (Amaranthus retroflexus L.), common lambsquarters (Chenopodium album L.), common ragweed (Ambrosia artemisiifolia L.), eastern black nightshade (Solanum ptycanthum Dunal), smartweed (Polygonum pensylvanicum L.), and velvetleaf (Abutilon theophrasti Medik.) (Niekamp Reference Niekamp1998; Nordby et al. Reference Nordby, Hartzler and Bradley2007; Taylor-Lovell et al. Reference Taylor-Lovell, Wax and Bollero2002; Valent 1998). Flumioxazin is absorbed mainly through plant roots and is minimally translocated within the phloem (Ferrell and Vencill Reference Ferrell and Vencill2003; OMAFRA 2009; Shaner Reference Shaner2014). Susceptible plants fail to emerge after the application of flumioxazin preplant or preemergence. Emerged weeds at the time of flumioxazin application show necrosis within hours of treatment and desiccate in days (Shaner Reference Shaner2014). Flumioxazin breaks down quickly in soil and water, primarily through microbial activity and hydrolysis (Ferrell and Vencill Reference Ferrell and Vencill2003), with half-lives of less than 1 d in water (USEPA 2003) and less than 20 d in soil (Ferrell and Vencill Reference Ferrell and Vencill2003); this is much shorter than the half-lives of other PPO herbicides like sulfentrazone (Gehrke et al Reference Gehrke, Camargo and Avila2020). Flumioxazin provides residual weed control up to 14 wk (OMAFRA 2009).
Pyroxasulfone is an isoxazoline herbicide that inhibits very-long-chain fatty-acid (VLCFA) synthesis in susceptible weeds (Anonymous 2019a). Pyroxasulfone controls A. tuberculatus and other Amaranthus species and other dicots such as C. album, kochia [Bassia scoparia (L.) A.J. Scott], and S. ptycanthum (Anonymous 2019a). It also controls annual monocot weeds, including barnyardgrass [Echinochloa crus-galli (P.) Beauv.], large crabgrass [Digitaria sanguinalis (L.) Scop.], and Setaria species (Anonymous 2019a). Pyroxasulfone is mainly absorbed from the soil through the roots of susceptible plants (Anonymous 2019a). It has a half-life of 8.2 to 70 d, which is longer than most other VLCFA elongases-inhibiting herbicides (Mueller and Steckel Reference Mueller and Steckel2011; Stephenson et al. Reference Stephenson, Blouin, Griffin, Landry, Woolam and Hardwick2017).
In Ontario, flumioxazin and pyroxasulfone are currently labeled for use in soybean at the rates of 71 to 107 g ai ha−1 and 125 to 247 g ai ha−1, respectively, dependent upon soil texture and organic matter levels. Literature supports that flumioxazin and pyroxasulfone are highly active preemergence herbicides against Amaranthus species and MHR A. tuberculatus (Nakatani et al. Reference Nakatani, Yamaji, Honda and Uchida2016; Strom et al. Reference Strom, Gonzini, Mitsdarfer, Davis, Riechers and Hager2019). To our knowledge, the biologically effective dose (BED) of flumioxazin and pyroxasulfone for MHR A. tuberculatus control has not been determined. Proper herbicide dosing is vital background information for growers, agronomists, and ag-retailers that helps them plan their weed management programs to control this problematic weed. Therefore, the objective of these two studies was to establish the BED of flumioxazin and pyroxasufone applied preemergence for MHR A. tuberculatus control in soybean.
Materials and Methods
Experimental Methods
Two studies were established: the first study investigated flumioxazin, and the second study investigated pyroxasulfone. These studies each consisted of six field experiments during 2016 and 2017 (three in each year) in commercial soybean fields across southern Ontario with MHR A. tuberculatus, previously confirmed with Group 2 (imazethapyr), Group 5 (atrazine), and Group 9 (glyphosate) resistance (Benoit Reference Benoit2019; Heap Reference Heap2021; Schryver Reference Schryver2017). One field experiment was established near Cottam, ON, Canada (42.149076°N, 82.683687°W). The other two field experiments were established on Walpole Island, ON, Canada (42.561492°N, 82.501487°W and 42.554334°N, 82.515518°W), at two sperate field sites. Location, year, soil parameters, and planting, spray, and emergence dates are presented in Table 1.
Location and application information for flumioxazin and pyroxasulfone biologically effective dose (BED) studies on multiple herbicide–resistant Amaranthus tuberculatus during 2016 and 2017 in Ontario, Canada.
a Abbreviation: OM, organic matter.
For both studies, the experiments were established as a randomized complete block design with four replications. Experimental locations were prepared for planting with two passes at right angles to each other using a S-tine cultivator with an attached basket harrow. Plots consisted of 3 soybean rows 75 cm apart for a total plot size of 2.25-m wide and 8-m long. Glyphosate/dicamba-resistant (GDR) soybean cultivars ‘DKB30-61’ (2016) and ‘DKB 10-01’ (2017) were seeded approximately 4-cm deep with a commercial planter calibrated to deposit ∼400,000 seeds ha−1 on the dates presented in Table 1. Treatments in the flumioxazin experiment included a nontreated plot, a weed-free plot that was hand weeded and hoed as necessary, and flumioxazin applications preemergence at 4.5, 8.9, 17.9, 35.8, 71.5, 107.3, 214.6, 429.2, and 858.4 g ai ha−1. Treatments in the pyroxasulfone experiment included a nontreated plot, a weed-free plot, and pyroxasulfone applications preemergence at 5.6, 11.2, 22.3, 44.6, 89.3, 133.9, 267.8, and 535.5 g ai ha−1. Herbicide rates used were a modified titration of the commercially labeled field rates. Treatment applications took place within 5 d after planting using a compressed CO2-powered backpack sprayer and with a 1.5-m hand boom equipped with four Hypro ULD 120-02 spray nozzles (Pentair, 375 5th Ave NW, New Brighton, MN) with nozzle spacing at 50 cm producing a 2.0-m-wide spray area, calibrated to apply 200 L ha−1 of water.
For both studies, evaluation of soybean injury occurred at 2, 4, and 8 wk after soybean emergence (WAE), and visible A. tuberculatus control assessments were conducted at 2, 4, 8, and 12 wk after application (WAA). The assessments used a range of 0% to 100% with 0% being no visible soybean injury or no A. tuberculatus control, and 100 being total necrosis/death of soybean or A. tuberculatus. To obtain A. tuberculatus density (plants m−2) and aboveground biomass (g m−2), two 0.25-m−2 frames were placed at random in each plot, and A. tuberculatus within the quadrats was counted, cut as close as possible to the soil surface, and dried in a kiln at 60 C ambient air temperature until no further mass/moisture reductions were observed. A small-plot combine was used to combine two rows of each plot at harvest maturity; yield (kg ha−1) and moisture content were recorded. Harvested yields were adjusted to standard moisture (13%) for statistical analysis.
Statistical Analysis
Data variance was analyzed via PROC GLIMMIX in SAS v. 9.4 (SAS Institute, 100 SAS Campus Drive, Cary, NC). Treatment was the only fixed effect, while site, replication by site, and site by treatment were identified as random effects. Because the interactions of site by treatment were determined to be nonsignificant, the data were averaged together across all sites.
Regression Analysis
For each study, the dose responses of flumioxazin and pyroxasulfone were determined for soybean injury at 2, 4, and 8 WAA, MHR A. tuberculatus control at 2, 4, 8, and 12 WAA, the population density of A. tuberculatus and dry biomass at 8 WAA, and soybean seed yield by fitting one of four regression equations, depending on the dependent variable, to the results via PROC NLIN in SAS v. 9.4 (SAS Institute). The regression analysis used the following equations.
Rectangular hyperbolic equation (fit to yield results) (Cousens 1985):
$$y = \left( {i*{\rm{dose}}} \right)/{\rm{1}} + \left[ {\left( {i*{\rm{dose}}/a} \right)} \right]$$
where a = upper asymptote, and i = initial slope.
Exponential decay equation (fit to density and biomass results):
$$y = a + b*{{\rm{e}}^{( - c\,*\,{\rm{dose}})}}$$
where a = lower asymptote, b = change in y from intercept to a, and c = slope from intercept to a.
Ascending dose–response equation (fit to control results):
$$y = c + \left( {d - c} \right)/\left( {{\rm{1}} + e\{ b*\left[ {{\rm{ln}}\left( {{\rm{dose}}} \right) - {\rm{ln}}\left( {{i_{{\rm{5}}0}}} \right)} \right]\} } \right)$$
where c = lower asymptote, d = upper asymptote, b = slope of the line, and i 50 = rate to observe 50% response.
Exponential regression equation (fit to injury results):
$$Y = a*e\left( {b*{\rm{dose}}} \right)$$
where a = upper asymptote, and b = slope.
For each study, the expected doses of flumioxazin or pyroxasulfone were calculated using the values generated via regression analysis for 50%, 80%, and 90% control of A. tuberculatus; 5% and 10% soybean injury; 80%, 90%, and 95% A. tuberculatus biomass and density reduction; and 50%, 80%, and 95% of the soybean seed yield relative to the weed-free control. Where the regression model could not calculate the required dose a dash (—) was used in place of numerical values in tables.
Results and Discussion
BED of Flumioxazin for Soybean Injury and MHR Amaranthus tuberculatus Control
The predicted doses of flumioxazin that caused 5% visible injury to soybean at 2, 4, and 8 WAA were 129, 362, and 740 g ha−1, and the predicted flumioxazin doses that caused 10% injury to soybean at 2, 4, and 8 WAA were 404, 592, and 869 g ha−1, respectively (Table 2). The predicted flumioxazin doses that were needed for 50%, 80%, and 95% soybean yield relative to the weed-free control plots were 3, 14, and 65 g ha−1, respectively (Table 2). Low levels of transient injury were observed early in the season, with visible injury no longer apparent at soybean maturity. In past publications, Priess et al. (Reference Priess, Norsworthy, Roberts and Spurlock2020) computed that a preemergence flumioxazin application of 105 g ha−1 caused 4% to 30% injury in soybean, depending on cultivar. Steppig et al. (Reference Steppig, Norsworthy, Scott and Lorenz2018) reported an application of flumioxazin (preemergence) at 107 g ha−1 caused an average of 13% soybean injury at 2 WAE, while Mahoney et al. (Reference Mahoney, Tardif, Robinson, Nurse and Sikkema2014) reported an average of 8% and 3% soybean injury at 2 and 4 WAA, respectively with preemergence-applied flumioxazin at 142 g ha−1.
Regression parameters (±SE) and predicted flumioxazin rates from an exponential regression model of percent soybean injury at 2, 4, and 8 wk after herbicide application (WAA) and ascending rectangular hyperbola model of grain yield at maturity adjusted to dry weight across six experiments conducted during 2016 and 2017 in Ontario, Canada.
a Exponential regression parameters (Equation 4): a, magnitude constant; b, rate constant. Ascending rectangular hyperbola parameters (Equation 1): a, upper asymptote; i, initial slope (at X = 0).
b R5 and R10 are the flumioxazin rates required to give 5% and 10% soybean injury, respectively. R50, R80, and R95 are the rates of flumioxazin required to obtain 50%, 80%, and 95% yield of weed-free plots, respectively.
Results of this study are consistent with others documenting that flumioxazin applied preemergence at 71 to 105 g ha−1 resulted in minimal yield losses in soybean (McNaughton et al. Reference McNaughton, Shropshire, Robinson and Sikkema2014; Taylor-Lovell et al. Reference Taylor-Lovell, Wax and Nelson2001). Niekamp et al. (Reference Niekamp, Johnson and Smeda1999) found a flumioxazin preemergence application at 90 g ha−1 caused no significant loss of yield, even in the presence of significant soybean injury. The authors suggested that the injury was due to reduced metabolization of flumioxazin in abnormally cold, wet conditions and decreased microbial degradation (Niekamp et al.Reference Niekamp, Johnson and Smeda1999). The label for Valtera™ herbicide (51.1 % flumioxazin) does not recommend applications to poorly drained soils and/or applications made when weather conditions are abnormally cold or wet (Anonymous 2019b). Interestingly, even in studies with severe injury, yield losses were relatively low or nonsignificant (Mahoney et al. Reference Mahoney, Tardif, Robinson, Nurse and Sikkema2014). The aggressive growth habit of soybean and the ability to branch and compensate for reduced stands have been suggested as reasons for soybean recovery from herbicide injury and subsequent minimal yield loss (Taylor-Lovell et al. Reference Taylor-Lovell, Wax and Nelson2001).
Flumioxazin doses predicted for 50%, 80%, and 90% MHR A. tuberculatus control were 19, 37, and 59 g ha−1 at 2 WAA; 23, 57, and 100 g ha−1 at 4 WAA; 28, 80, and 147 g ha−1 at 8 WAA; and 31, 83, and 151 g ha−1 at 12 WAA, respectively (Table 3). The doses of flumioxazin required for 50%, 80%, and 90% visible control of MHR A. tuberculatus increased at each assessment timing. At 8 and 12 WAA, flumioxazin’s predicted dose for 90% MHR A. tuberculatus control was above the maximum label dose of 107 g ha−1 in Canada. The predicted flumioxazin doses for 80%, 90%, and 95% decline in A. tuberculatus density were 50, 73, and 97 g ha−1, respectively (Table 3). Higher doses were predicted for the same levels of biomass reduction (Table 3). The predicted doses of flumioxazin for 80%, 90%, and 95% decline of A. tuberculatus biomass were 141, 210, and 301 g ha−1, respectively (Table 3).
Regression parameters (±SE) and predicted flumioxazin rates from a dose–response model of percent Amaranthus tuberculatus control and inverse exponential model of A. tuberculatus density (plants m−2) and aboveground biomass (g m−2) at 8 wk after herbicide application (WAA) across six experiments conducted during 2016 and 2017 in Ontario, Canada.
a Dose–response parameters (Equation 3): d, upper asymptote; c, lower asymptote; b, slope; i 50, Rate required for 50% control. Inverse exponential parameters (Equation 2): a, lower asymptote; b, reduction in y from intercept to asymptote; c, slope.
b R50, R80, and R90 are the flumioxazin rates required to give 50%, 80%, and 90% control of A. tuberculatus, respectively. R80eq, R90eq, and R95eq are the rates of flumioxazin required to reduce A. tuberculatus density and biomass by 80%, 90%, and 95%, respectively.
These above results are similar to those of Schryver et al. (Reference Schryver, Soltani, Hooker, Robinson, Tranel and Sikkema2017), who reported 85% and 77% MHR A. tuberculatus control at 8 and 12 WAA, respectively, with an application of flumioxazin preemergence at 107 g ha−1 in soybean. The same study found 75% density and 82% MHR A. tuberculatus biomass reduction when flumioxazin was applied preemergence (Schryver et al. Reference Schryver, Soltani, Hooker, Robinson, Tranel and Sikkema2017). In an Illinois study, flumioxazin (70 g ha−1 preemergence) controlled 4-hydroxphenylpyruvate dioxygenase–resistant A. tuberculatus 90% at 60 DAA (Hausman et al. Reference Hausman, Tranel, Riechers, Maxwell, Gonzini and Hager2013). Hay et al. (Reference Hay, Shoup and Peterson2019) reported 84% MHR A. tuberculatus control at 8 WAA with a flumioxazin application (preemergence) at 107 g ha−1 in soybean. In contrast, Legleiter et al. (Reference Legleiter, Bradley and Massey2009) found only 48% to 53% A. tuberculatus control at 12 WAA with a flumioxazin preemergence application at 90 g ha−1 in soybean. Conflicting findings may be because of differences in A. tuberculatus emergence pattern, A. tuberculatus density, soybean emergence timing and canopy development, environmental conditions, or soil characteristics.
BED of Pyroxasulfone for Soybean Injury and MHR Amaranthus tuberculatus Control
The predicted doses of pyroxasulfone that caused 5% and 10% injury in soybean were 585 and 698 g ha−1 at 2 WAA and 625 and 730 g ha−1 at 4 WAA, respectively, which is much higher than the maximum labeled rate in Canada (246.5 g ha−1) (Table 4). This indicates excellent soybean tolerance to pyroxasulfone applied preemergence. Soybean injury at 8 WAA could not be predicted via regression equation, because the dose that caused 5% or 10% soybean injury was beyond the dose range evaluated. The predicted doses of pyroxasulfone needed to obtain 50%, 80%, and 95% yield of the weed-free control were 6, 24, and 112 g ha−1, respectively (Table 4). Pyroxasulfone doses required for severe soybean injury were beyond the dose range evaluated in this study. In the current study, there was a wide margin of soybean safety, with pyroxasulfone showing low levels of transient soybean injury (>6%) that rapidly disappeared even at doses that exceeded two times the highest labeled dose of 246.5 g ha−1 (Anonymous 2019a). In other studies, McNaughton et al. (Reference McNaughton, Shropshire, Robinson and Sikkema2014) found 178 g ha−1 of pyroxasulfone applied preemergence caused 3% soybean injury with no yield loss detected. Belfry et al. (Reference Belfry, McNaughton and Sikkema2015) also observed minor transient soybean injury with a preemergence treatment of 100 to 150 g ai ha−1 pyroxasulfone. Others have found pyroxasulfone applications (preemergence) up to 500 g ha−1 caused negligible (<10%) soybean injury at 2 WAA, but there was up to 25% biomass reduction at 5 WAA (Stephenson et al. Reference Stephenson, Blouin, Griffin, Landry, Woolam and Hardwick2017; Williams et al. Reference Williams, Hausman and Moody2017; Yamaji et al. Reference Yamaji, Honda, Kobayashi, Hanai and Inoue2014). Soybean tends to recover from early injury without any impact on yield (Stephenson et al. Reference Stephenson, Blouin, Griffin, Landry, Woolam and Hardwick2017; Williams et al. Reference Williams, Hausman and Moody2017; Yamaji et al. Reference Yamaji, Honda, Kobayashi, Hanai and Inoue2014).
Regression parameters (±SE) and predicted pyroxasulfone rates from an exponential regression model of percent crop injury at 2, 4, and 8 wk after herbicide application (WAA) and ascending rectangular hyperbola model of grain yield at maturity adjusted to dry weight across six experiments conducted during 2016 and 2017 in Ontario, Canada.
a Exponential regression parameters (Equation 4): a, magnitude constant; b, rate constant. Ascending rectangular hyperbola parameters (Equation 1): a, upper asymptote; i, initial slope (at X = 0).
b R5 and R10 are the pyroxasulfone rates required to give 5% and 10% injury of soybean, respectively. R50, R80, and R95 are the rates of pyroxasulfone required to obtain 50%, 80%, and 95% yield of weed-free plots, respectively. A dash (—) represents a value that could not be calculated by the regression equation.
The pyroxasulfone doses for 50%, 80%, and 90% MHR A. tuberculatus control were 25, 50, and 88 g ha−1 at 2 WAA; 32, 72, and 145 g ha−1 at 4 WAA; 40, 110, and 247 g ha−1 at 8 WAA; and 41, 109, and 274 g ha−1 at 12 WAA, respectively (Table 5). The doses of pyroxasulfone required for 50%, 80%, and 90% MHR A. tuberculatus control increased at each assessment timing. At 12 WAA, the pyroxasulfone dose predicted to achieve 90% MHR A. tuberculatus control was above the maximum label dose of 246.5 g ha−1 in Canada. The predicted dose of pyroxasulfone to reduce A. tuberculatus density by 80% was 117 g ha−1 (Table 5). Additionally, 204 and 382 g ai ha−1 pyroxasulfone were predicted for 80% and 90% decreases in A. tuberculatus biomass, respectively (Table 5). Pyroxasulfone doses required for 90% and 95% A. tuberculatus density reduction and 95% A. tuberculatus biomass reduction could not be calculated, because those doses were beyond the doses applied in this study. Results are similar to those of Oliveira et al. (Reference Oliveira, Jhala, Gaines, Irmak, Amundsen, Scott and Knezevic2017), who found that pyroxasulfone applied preemergence at 90, 180, and 270 g ha−1 controlled MHR A. tuberculatus 51%, 93%, and 94%, respectively, at 8 WAA. Additionally, Oliveira et al. (Reference Oliveira, Jhala, Gaines, Irmak, Amundsen, Scott and Knezevic2017) showed that pyroxasulfone applied preemergence at 270 g ha−1 decreased MHR A. tuberculatus density 95% in soybean. Other researchers have found preemergence applications of pyroxasulfone (89 to 210 g ha−1) to control A. tuberculatus 78% to 87% at 8 WAA (Hausman et al. Reference Hausman, Tranel, Riechers, Maxwell, Gonzini and Hager2013; Hay et al. Reference Hay, Shoup and Peterson2018; Schryver et al. Reference Schryver, Soltani, Hooker, Robinson, Tranel and Sikkema2017). Meyer et al. (Reference Meyer, Norsworthy, Young, Steckel, Bradley, Johnson and Butts2016) reported an 81% reduction in A. tuberculatus density at 5 WAA with preemergence applications of pyroxasulfone (179 g ai ha−1).
Regression parameters (±SE) and predicted pyroxasulfone rates from a dose–response model of percent Amaranthus tuberculatus control and inverse exponential model of A. tuberculatus density (plants m−2) and aboveground biomass (g m−2) at 8 wk after herbicide application (WAA) across six experiments conducted during 2016 and 2017 in Ontario, Canada.
a Dose–response parameters (Equation 3): d, upper asymptote; c, lower asymptote; b, slope; i 50, rate required for 50% control. Inverse exponential parameters (Equation 2): a, lower asymptote; b reduction in y from intercept to asymptote; c, slope.
b R50, R80, and R90 are the pyroxasulfone rates required to give 50%, 80%, and 90% control of A. tuberculatus, respectively. R80eq, R90eq, and R95eq are the rates of pyroxasulfone required to reduce A. tuberculatus density and biomass by 80%, 90%, and 95%, respectively. A dash (—) represents a value that could not be calculated via the regression equation.
This study demonstrates acceptable levels of soybean safety at currently labeled rates of flumioxazin and pyroxasulfone in Ontario, Canada. Flumioxazin and pyroxasulfone applied preemergence provide commercially acceptable early-season MHR A. tuberculatus control in soybean at currently labeled rates up to 4 WAA. At 12 WAA, the calculated doses to achieve 90% control of A. tuberculatus with flumioxazin or pyroxasulfone were greater than the current Canadian label rates. Higher doses were required for control at each increasing assessment interval, with 70% and 89% more pyroxasulfone and 47% and 51% more flumioxazin required to provide 90% control at 8 WAA and 12 WAA, respectively, as opposed to 4 WAA. The authors suggest that the implementation of a two-pass herbicide program consisting of an effective preemergence residual herbicide such as pyroxasulfone plus flumioxazin and an effective postemergence herbicide could enhance full-season MHR A. tuberculatus control in GDR soybean.
Acknowledgments
We would like to extend our thanks to Chris Kramer for his technical support and Michelle Edwards and Christy Shropshire for guidance in statistical analysis. This research was funded in part by the Grain Farmers of Ontario (GFO), Nufarm Agriculture Inc., and Valent Canada. No other conflicts of interest are declared.
Open access
