Hostname: page-component-77f85d65b8-v2srd Total loading time: 0 Render date: 2026-04-23T01:33:27.306Z Has data issue: false hasContentIssue false

Turbulent drag reduction through rotating discs

Published online by Cambridge University Press:  28 March 2013

Pierre Ricco*
Affiliation:
Department of Mechanical Engineering, The University of Sheffield, Mappin Street, Sheffield S1 3JD, UK
Stanislav Hahn
Affiliation:
Honeywell Turbo Technologies, Turanka 100/1236, Brno, Czech Republic
*
Email address for correspondence: p.ricco@sheffield.ac.uk

Abstract

An active technique for friction drag reduction in a turbulent channel flow is studied by direct numerical simulations. The flow modification is induced by the steady rotation of rigid flush-mounted discs, located next to one another on the walls. The effect of the disc motion on the turbulent drag is investigated at a Reynolds number of ${R}_{\tau } = 180$ , based on the friction velocity of the stationary-wall case and the half channel height. For a fixed maximum disc tip velocity, drag reduction can be achieved when the disc diameter is larger than a threshold, while below this threshold the drag increases. A maximum drag reduction of 23% is computed. The net power saved, obtained by taking into account the power spent to enforce the rotational motion against the fluid viscous resistance, is found to be positive and reach 10%. The disc-flow parameters required for commercial aircraft flight conditions and flows over high-speed trains and ship hulls are estimated and future implementations based on existing micro-electromagnetic motor and micro-air turbine technologies are discussed.

Information

Type
Papers
Copyright
©2013 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable