Hostname: page-component-6766d58669-nqrmd Total loading time: 0 Render date: 2026-05-14T16:49:53.337Z Has data issue: false hasContentIssue false
  • English
  • Français

Design of miniaturized single and dual-band bandpass filters using diamond-shaped coupled line resonator for next-generation wireless systems

Published online by Cambridge University Press:  29 December 2022

Bilal Mushtaq Open the ORCID record for Bilal Mushtaq [Opens in a new window]  and
Sohail Khalid
Bilal Mushtaq*
Affiliation:
Department of Electrical Engineering, Riphah International University, Islamabad 246762, Pakistan
Sohail Khalid
Affiliation:
Department of Electrical Engineering, Riphah International University, Islamabad 246762, Pakistan
*
Author for correspondence: Bilal Mushtaq, E-mail: bilalmushtaq88@outlook.com
Get access Rights & Permissions [Opens in a new window]

Abstract

This paper presents a multi-mode resonator (MMR) for next-generation wireless systems that achieves single and dual-band bandpass filter (BPF) responses using a split-ring dual-path structure. The proposed BPF design is realized by employing two pairs of parallel couple lines and two symmetrical step-impedance open-circuited stubs (SIOCS). SIOCS are used to improve selectivity and increase the number of transmission zeros/poles. The proposed single-band BPF exhibits an ultra-wideband (UWB) response having a center frequency of 7.5 GHz, a minimum insertion loss of less than 0.48 dB, and a maximum return loss of 25.35 dB. The proposed UWB BPF has a stopband suppression of 39.34 dB up to 18 GHz and a 3 dB fractional bandwidth of 48.23%. Moreover, a dual-band BPF has been accomplished by utilizing the same architecture while slightly changing the MMR structure and adding more coupling. The center frequency (bandwidth) of the dual broadband BPF is 7.40 GHz (2.40 GHz) and 14.15 GHz (1.7 GHz), respectively. The measured minimum insertion loss is less than 0.23 dB and a return loss of less than 16.8 dB with 3 dB FBWs of 32.4 and 12.1%. Finally, two prototypes are fabricated to validate the proposed characteristics. The BPF's simulated and measured results are in good agreement.

Keywords

Bandpass filter (BPF)dual-bandmicrostripmultimodeMMRultrawide

Information

Type
Filters
Information
International Journal of Microwave and Wireless Technologies , Volume 15 , Issue 3 , April 2023 , pp. 375 - 383
Check for updates
Copyright
Copyright © The Author(s), 2022. Published by Cambridge University Press in association with the European Microwave Association

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

Federal Communications Commission (2002) Revision of part 15 of the commission's rules regarding ultra-wideband transmission systems. First Report and Order, FCC 02-48.Google Scholar
Fang, C, Senshen, D and Feng, X (2015) A novel UWB bandpass filter based on double interdigital structure. In 2015 Asia-Pacific Microwave Conference (APMC), Nanjing, China, Vol. 2. IEEE.CrossRefGoogle Scholar
Liu, J, Ding, W, Chen, J and Zhang, A (2019) New ultra-wideband filter with sharp notched band using defected ground structure. Progress in Electromagnetics Research Letters 83, 99–105.CrossRefGoogle Scholar
Chu, Q-X and Tian, X-K (2010) Design of UWB bandpass filter using stepped-impedance stub-loaded resonator. IEEE Microwave and Wireless Components Letters 20, 501–503.CrossRefGoogle Scholar
Hung, CY, Weng, MH and Su, YK (2007) Design of compact and sharp rejection UWB BPFs using interdigital stepped-impedance resonators. IEICE Transactions on Electronics 90, 1652–1654.CrossRefGoogle Scholar
Luo, X-h, Cheng, X, Han, J-a, Zhang, L, Chen, F-j, Guo, Y-j, Xia, X-l and Deng, X-j (2019) Compact dual-band bandpass filter using defected SRR and irregular SIR. Electronics Letters 55, 463–465.CrossRefGoogle Scholar
Chang, YC, Kao, CH, Weng, MH and Yang, RY (2008) Design of the compact wideband bandpass filter with low loss, high selectivity and wide stopband. IEEE Microwave and Wireless Components Letters 18, 187–189.CrossRefGoogle Scholar
Yang, L, Zhu, L, Choi, W-w, Tam, K-W, Zhang, R and Wang, J (2017) Wideband microstrip-to-microstrip vertical transition with high filtering selectivity using open-circuited slotline SIR. IEEE Microwave and Wireless Components Letters 27, 329–331.CrossRefGoogle Scholar
Ji, X-C, Ji, W-S, Feng, L-Y, Tong, Y-Y and Zhang, Z-Y (2019) Design of a novel multi-layer wideband bandpass filter with a notched band. Progress In Electromagnetics Research Letters 82, 9–16.CrossRefGoogle Scholar
Almorqi, S, Shaman, H and Alamoudi, A (2016) Parallel-coupled stub-loaded resonator bandpass filter with ultra-wideband passband on multilayer liquid crystal polymer substrates. International Journal of Microwave and Wireless Technologies 8, 1183–1186.CrossRefGoogle Scholar
Khalilpour, J (2018) A compact and sharp ultra-wide bandpass filter by using short-stub-loaded rectangular ring and split ring resonators. Electromagnetics 38, 352–365.CrossRefGoogle Scholar
Zhang, Z and Xiao, F (2012) An UWB bandpass filter based on a novel type of multi-mode resonator. IEEE Microwave and Wireless Components Letters 22, 506–508.CrossRefGoogle Scholar
Chu, Q-X, Wu, X-H and Tian, X-K (2011) Novel UWB bandpass filter using stub-loaded multiple-mode resonator. IEEE Microwave and Wireless Components Letters 21, 403–405.CrossRefGoogle Scholar
Gorur, AK (2020) A dual-band balun BPF using codirectional split ring resonators. IEEE Microwave and Wireless Components Letters 30, 949–952.CrossRefGoogle Scholar
Ieu, W, Zhang, D and Zhou, D (2017) High-selectivity dual-mode dual-band microstrip bandpass filter with multi-transmission zeros. Electronics Letters 53, 482–484.CrossRefGoogle Scholar
Ren, B, Liu, H, Ma, Z, Ohira, M, Wen, P, Wang, X and Guan, X (2018) Compact dual-band differential bandpass filter using quadruple-mode stepped-impedance square ring loaded resonators. IEEE Access 6, 21850–21858.CrossRefGoogle Scholar
Fu, S, Wu, B, Chen, J, Sun, S-j and Liang, C-h (2012) Novel second-order dual-mode dual-band filters using capacitance loaded square loop resonator. IEEE Transactions on Microwave Theory and Techniques 60, 477–483.CrossRefGoogle Scholar
AbdulRehman, M and Khalid, S (2018) Design of tri-band bandpass filter using symmetrical open stub loaded step impedance resonator. Electronics Letters 54, 1126–1128.CrossRefGoogle Scholar
Khalid, S and Shafique, MF (2017) Exact synthesis design theory of analogue wideband bandpass filter. Microelectronics Journal 64, 53–59.CrossRefGoogle Scholar
Pozar, DM (2011) Microwave Engineering. Hoboken, NJ: John Wiley and Sons.Google Scholar
Hong, J-S and Lancaster, MJ (2001) Microstrip Filters for RF/Microwave Applications. New York: Wiley.CrossRefGoogle Scholar
Hunter, I (2001) Theory and Design of Microwave Filters, Vol. 48. UK: IET.CrossRefGoogle Scholar