Introduction
Soft-bedded ice streams are the main control of ice discharge from the Ross Sea sector of the West Antarctic ice sheet (Reference BentleyBentley,1998; Reference Joughin and TulaczykJoughin and Tulaczyk,2002).Their fast flow arises from subglacial presence of weak till (Reference Alley, Blankenship, Bentley and RooneyAlley and others, 1987; Reference Blankenship, Bentley, Rooney and AlleyBlankenship and others, 1987), which acts as a lubricator between basal ice and the underlying “bedrock” (Reference Joughin and TulaczykKamb, 1991, Reference Kamb, Alley and Bindschadler2001; Reference Tulaczyk, Kamb and EngelhardtTulaczyk and others, 2000a). This lubrication occurs when pore-water pressure builds up in the till due to a poorly drained subglacial bed. The resulting low effective stress results in a very low frictional resistance (Reference Tulaczyk, Kamb and EngelhardtTulaczyk and others, 2001a). Ice streams may cease to flow fast if the lubricating conditions are lost (Reference Tulaczyk, Kamb and EngelhardtTulaczyk and others, 2000b). Basal freeze-on is an important subglacial mechanism because it may induce water-pressure changes large enough to trigger ice-stream stoppage (Christoffersen and Tulaczyk, in pressb). The recent stoppage of Ice Stream C, West Antarctica, may have been caused by a switch from basal melting to basal freezing (Reference PetitPrice and Whillans, 2001; Reference AlleyAlley, 2002; Reference Joughin and TulaczykJoughin and Tulaczyk,2002).
Slow-moving interstream ridges border the trunks of fast-flowing ice streams. Weak subglacial till may not be abundantly present beneath interstream ridges, and the basal ice is generally frozen-based (Reference Gades, Raymond, Conway and JacobelGades and others, 2000). Location of the interstream ridges may be thermally controlled by the distribution of basal freezing (Reference Engelhardt and KambEngelhardt and Kamb, 1997; Reference Bentley, Lord and LiuBentley and others, 1998; Reference RaymondRaymond and others, 2001).
Whereas basal melting is a destructive process, basal freezing produces distinct basal ice facies, which can be sampled and analyzed to infer the history of subglacial hydrology (Reference Boulton and SpringBoulton and Spring, 1986; Reference Souchez and LorrainSouchez and others, 1987). Moreover, basal freezing may lead to characteristic changes in properties of subglacial sediments (Reference HamiltonHindmarsh, 1999). Therefore, it is particularly important to quantitatively model processes associated with changes in the basal regime from melting to freezing. Results of such work may improve the conceptual framework for interpretation of past and future borehole and geophysical observations. They may also lead to improved models of ice-stream and ice-sheet dynamics. Here, we present a numerical model that couples ice and sediment thermodynamics. The model is used to make testable predictions (e.g. basal ice temperature distribution, subglacial sediment porosity, solute concentration in liquid pore water, isotopic composition of liquid pore water and basal ice).
Existing Observational Constraints
Extensive geophysical studies conducted in the Ross Sea sector of the West Antarctic ice sheet have provided a considerable amount of information about basal and subglacial conditions beneath ice streams and interstream ridges (Reference Blankenship, Bentley, Rooney and AlleyBlankenship and others, 1986,Reference Blankenship, Bentley, Rooney and Alley1987; Reference Alley, Blankenship, Bentley and RooneyAlley and others, 1987; Reference BentleyBentley, 1987,Reference Bentley1998; Reference Bentley, Lord and LiuBentley and others, 1998). The California Institute of Technology drilling program has subsequently provided detailed observational constraints about the basal zone of this region (Reference Engelhardt, Humphrey, Kamb and FahnestockEngelhardt and others, 1990; Reference Joughin and TulaczykKamb, 1991; Reference Engelhardt and KambEngelhardt and Kamb, 1997,Reference Engelhardt and Kamb1998;Reference Tulaczyk, Kamb and EngelhardtTulaczyk and others, 2000a, Reference Tulaczyk, Kamb and Engelhardt2001a). The location of the Ross Sea region is outlined in Figure 1.
Fig. 1. satellite image of the ross sea sector of the west antarctic ice sheet showing locations of ice streams and interstream ridges (advanced very high resolution radiometer data distributed by the united states geological survey office in flagstaff, az).the drilling sites referred to in the text are: upb on the active whillans ice stream (wis), upc on the stagnant ice stream c (isc), and siple dome (s) on the interstream ridge that borders ice stream d (isd). inset in the lower right corner shows a shaded relief image of the grounded portions of the antarctic ice sheet. white box gives approximate extent of the main figure.
Active ice streams
Soft-bedded ice-stream conditions were initially inferred from seismic surveys (Reference Blankenship, Bentley, Rooney and AlleyBlankenship and others, 1986, Reference Blankenship, Bentley, Rooney and Alley1987). Borehole observations from Whillans Ice Stream and Ice Stream D are reported in Reference Kamb, Alley and BindschadlerKamb (2001). Characteristic observations are here: (1) a finite layer of unfrozen soft and deformable till of ∼ 5 m ; (2) basal temperature close to the pressure-melting point, ∼0.7°C for 1000 m of ice; (3) basal temperature gradient of ∼ 0 . 0 –Cm – 1 ; (4) high and uniform till porosity of ∼ 4 0 % as seen in Figure 2a; (5) low and uniform effective stress of - 1 – 5 k P a ; and (6) basal shear strength of < 10 kPa (Reference Tulaczyk, Kamb and EngelhardtTulaczyk and others, 2001a).
Fig. 2. diagrams showing vertical porosity distributions measured in sub-ice-stream till cores (Reference Kamb, Alley and Bindschadlerkamb, 2001; tulaczyk, unpublished data). relatively constant porosity distribution is observed in the upb till beneath the fast-flowing whillans ice stream (a). in contrast, porosity distributions in the upc till beneath the stagnant ice stream c decrease by 10–15% towards the core top (b).
Observations from Whillans Ice Stream and Ice Stream D show that basal conditions are not hydrostatic. Constant porosity distributions with depth, as seen in Figure 2a, indicate lithostatic pressure conditions in the basal zone of fast-moving ice streams (Reference Tulaczyk, Kamb and EngelhardtTulaczyk and others, 2001a).
Stagnant ice streams
Ice-stream stoppage is triggered when basal resistance is increased to the point where it supports a large fraction of the driving stress (Reference RaymondRaymond, 1996; Reference Tulaczyk, Kamb and EngelhardtTulaczyk and others, 2000b; Reference Anandakrishnan, Alley, Jacobel, Conway, Alley and BindschadlerAnandakrishnan and others, 2001; Reference Whillans, Bentley, van der Veen, Alley and BindschadlerWhillans and others, 2001). An increase in basal shear strength may be caused by an increase in effective stress and a reduction in subglacial water pressure. From boreholes drilled to the base of the stopped Ice Stream C the following relevant observations have been reported (Reference Carsey, Engelhardt, Behar and LaneCarsey and others, 2001; Reference Kamb, Alley and BindschadlerKamb, 2001; Tulaczyk, unpublished data): (1) a relatively steep basal temperature gradient of∼0.05˚Cm–1 ; (2) vertically extensive layers of debris-bearing accretion ice o f ∼ 12–25 m; (3) unfrozen and supercooled subglacial till with a temperature depressed by up to ∼ 0 . 3 5 °C from the pressure-melting point; and (4) upward decrease of till porosity by ∼10–15% difference from core top to core bottom (Fig. 2b).
Several hypotheses have been proposed to explain the recent stoppage of Ice Stream C (Reference Joughin and TulaczykKamb, 1991, Reference Kamb, Alley and Bindschadler2001; Reference AlleyAlley, 1993; Reference Alley, Anandakrishnan, Bentley and LordAlley and others, 1994; Reference Anandakrishnan and AlleyAnandakrishnan and Alley, 1997; Reference Anandakrishnan, Alley, Jacobel, Conway, Alley and BindschadlerAnandakrishnan and others, 2001). Basal freeze-on can either be a cause of ice-stream stoppage (Reference AlleyAlley, 2002; Reference HopkeJoughin and Tulaczyk, 2002) or occur as a result hereof. Ice-stream shut-down must be associated with a large decrease in basal shear heating, whatever the initial cause of stoppage may be. Detection of an unfrozen bed beneath Ice Stream C, which stopped about 150 years ago, and a partially unfrozen bed beneath the Siple Ice Stream, which stopped about 500 years ago, indicate that ice-stream stoppage occurs several centuries before the till layer becomes completely frozen (Reference Bentley, Lord and LiuBentley and others, 1998; Reference Gades, Raymond, Conway and JacobelGades and others, 2000).
Interstream ridges
Slow-moving interstream ridges border the trunks of ice streams. Edges of these ridges play an important role in ice-stream dynamics because they take up the high marginal shear stress transferred across ice-stream margins (Reference RaymondRaymond, 1996). The location of interstream ridges in the Ross Sea sector appears to be controlled by the spatial distribution of basal freezing and melting (Reference Engelhardt and KambEngelhardt and Kamb, 1997; Reference Kamb, Alley and BindschadlerKamb, 2001; Reference RaymondRaymond and others, 2001; Reference Whillans, Bentley, van der Veen, Alley and BindschadlerWhillans and others, 2001). However, availability of sediments may also modulate interstream ridge boundaries (Reference Anandakrishnan, Blankenship, Alley and StoffaAnandakrishnan and others, 1998; Reference BellBell and others, 1998). Reference Kamb, Alley and BindschadlerKamb (2001) summarizes basal conditions observed beneath interstream ridges in the Ross Sea sector: (1) basal temperatures are around –0.6° to –2.5°C below the pressure-melting point; (2) basal temperature gradients are of the order of ∼0.03–0.05˚C m–1; and (3) frozen-on, debris-laden basal ice layers are present. Reference Kamb, Alley and BindschadlerKamb (2001) also reports that piston core damage may indicate impact with solid rock(s), although frozen sediments may exhibit comparatively high strength values.
Theoretical Treatment of the Basal Zone
The properties of subglacial sediments change in response to switches in the thermal regimen between basal melting and basal freezing (Christoffersen and Tulaczyk, in press a). The coupling between thermal changes and physical properties in the basal zone may have a profound effect upon ice dynamics (Bougamont and others, in press). Here, we have simplified the theoretical treatment of basal freeze-on in order to (1) study long-term effects (up to ∼125000years) and (2) make testable predictions that can be related directly to borehole observations. Our numerical analysis of ice–water–sediment interaction contains three different pressure conditions, which are outlined in Figure 3. Lithostatic pressure conditions are found in the till layer beneath active ice streams (Fig.3a). Hydrostatic pressure conditions should arise during ice-stream slow-down (Fig. 3b). Cryostatic pressure conditions are associated with ice-stream stagnation and subsequent dewatering of till due to basal freeze-on (Fig. 3c). These cases are associated with different stages of ice streaming, i.e. fast flow, slowdown and complete shut-down (Fig. 3d).
Fig. 3. A conceptual diagram illustrating differences between lithostatic pressure condition (a), hydrostatic pressure condition (and cryostatic pressure condition (c).The total stress, σn, is a sum of water pressure, pw, and effective pressure, p0. In (a) theeffective stress is constant due to till mixing by fast ice-stream flow. In (b) the pore-water pressure gradient is reduced due to ice-stream slowdown, a water film develops from hydraulic diffusion and a basal layer of accretion ice develops due to basal freeze-on. In (c) localized drop in pore-water pressure at the ice–till interface generates non-hydrostatic hydraulic gradients, which drive Darcian water flow out of the till and allow continued growth of the basal ice layer. (d) illustrates the gradual transition between (a), (b) and (c), which occurs during ice-stream stoppage, when ice velocity drops (solid line) and freeze rate increases (dashed line).
Ice-streammode: till mixing and lithostatic pressure condition
Reference Tulaczyk, Scherer and ClarkTulaczyk and others (2001b) proposed that the lithostatic pressure distribution beneath fast-flowing ice streams is caused by intermittent or continuous subglacial till deformation that reaches several meters into the bed. Continuous till deformation is not necessary due to the long hydraulic relaxation time of fine-grained sub-ice-stream till with characteristic diffusive time-scale of approximately 25 years. Intermittent till deformation can produce the inferred lithostatic water-pressure distribution because the mixing, if vigorous enough, will work against the normal tendency of pore water to achieve hydrostatic water-pressure distribution (Fig. 3a).
Force balance in saturated porous media is usually given by (Reference Konrad and DuquennoiMitchell, 1993, p. 315):
where p n is gravitational overburden pressure, p′ effective pressure and p w = p h + u is the water pressure, where ph is the hydrostatic water-pressure component and u is the excess water-pressure component. Water flow is driven by hydraulic gradients, which may be expressed through excess, rather than total, water pressure (Reference Konrad and DuquennoiMitchell, 1993, p. 315). When till deforms in the lithostatic-pressure case, we derive the vertical distribution of excess water pressure, u, by adding a parameterized mixing term to the customary hydraulic diffusion equation, which is used for flow in non-deforming sediments (Reference Konrad and DuquennoiMitchell, 1993, equation 13.19). Hence,
where cv is hydraulic diffusivity, t is time, z is depth below ice–till interface, ub is basal ice velocity, and f is a constant for our hypothesized mixing term. The value of f is chosen so that mixing is important only when the basal velocity is high ( 4100ma–1) . As ice-stream velocity decreases, the mixing term of Equation (2) becomes increasingly insignificant, and the system adjusts toward hydrostatic conditions through hydraulic diffusion. When till mixing ceases, the rate of vertical water flow is prescribed by Darcy’s flow law (Reference Domenico and SchwartzDomenico and Schwartz, 1990, equation 4.53):
The transition to hydrostatic conditions through hydraulic diffusion is associated with expulsion of excess pore water that was present in the till under lithostatic conditions (Fig. 3b). The excess water may be drained away through a basal water system or it may pond at the ice–till interface until it is consumed by basal freeze-on. Decimetre-thick basal water layers have been observed in boreholes drilled near the paleo-ice-stream margin of Ice Stream C in the vicinity of the UpC camp (Carsey and others, in press).
Ice-sheet mode: basal freeze-on and cryostatic pressure condition
When freeze-on exceeds the hydraulic capability of a distributed basal water system, a cryostatic pressure distribution develops in the till. Cryostatic suction, which has been studied extensively by permafrost engineers, plays an important role in numerical frost-heave simulations (Reference Nereson and RaymondO’Neill and Miller, 1985; Reference Kamb, Alley and BindschadlerKonrad and Duquennoi, 1993; Reference Engelhardt, Humphrey, Kamb and FahnestockFowler and Krantz, 1994; Reference MitchellMiyata, 1998; Reference MiyataNakano, 1999). The phenomenon is analogous to the more commonly known capillary suction, as freezing and thawing in a saturated porous medium is physically similar to wetting and drying in a partially saturated porous medium (Reference Engelhardt, Humphrey, Kamb and FahnestockFowler and Krantz, 1994).
Pore water in fine-grained porous media becomes supercooled when pore spaces are too small for ice crystal growth. The inhibition of ice growth in fine-grained sediments stems from ice–water interfacial curvature effects related to surface tension arising from micron-sized pore spaces (Reference Studinger, Bell, Blankenship, Finn, Arko and MorseTester and Gaskin, 1996; Reference HindmarshHohmann, 1997). The surface tension of West Antarctic sub-ice-stream till has been estimated as 104 kPa (Reference Tulaczyk, Mickelson and AttigTulaczyk,1999), although this value is likely to be an underestimate since the calculation assumed that all particles are spheres. In reality, a large fraction of particles are platy clays, which can have much greater area-to-volume ratios than that of a sphere. For ice to form within subglacial sediments, the ice pressure must exceed the gravitational overburden pressure plus the surface tension (Reference HookeHopke, 1980; Reference Nereson and RaymondO’Neill and Miller, 1985; Reference Kamb, Alley and BindschadlerKonrad and Duquennoi, 1993; Reference Engelhardt, Humphrey, Kamb and FahnestockFowler and Krantz, 1994).
Ice–water phase equilibrium is prescribed by the Clapeyron equation, which is a general thermodynamic relation, not specific to our purpose. Liquid water freezes when the pressure components and the temperature satisfy a generalized form of the Clapeyron equation (Reference Nereson and RaymondO’Neill and Miller, 1985; Reference Padilla and VilleneuvePadilla and Villeneuve,1992):
where pw is the water pressure, pi is the ice pressure, po is the osmotic pressure, p w is the density of water, P i is the density of ice, l is the coefficient of latent heat of fusion and t is the temperature in °C.
When ice crystal growth is inhibited inside fine-grained sub-ice-stream tills, the response to freezing is a reduction in pore-water pressure at the freezing interface. Instead of freezing within the pore spaces, liquid water flows towards the freezing interface where it accretes into a layer of segregation ice (Reference Nereson and RaymondO’Neill and Miller, 1985; Reference Kamb, Alley and BindschadlerKonrad and Duquennoi, 1993). Subglacial freezing thus induces yet another characteristic pressure distribution in the sub-ice-stream till. Based on permafrost terminology, we call this the cryostatic pressure distribution (Fig. 3c). This pressure distribution occurs when the ice stream is in a stagnant ice-sheet-like stage where the till does not deform and till pore water flows toward the freezing ice base.
Heat and solutes are transported vertically in the till by diffusion as well as advection. The transport equation for both variables is a standard diffusion–advection equation (Reference Domenico and SchwartzDomenico and Schwartz, 1990, p. 472):
where x is the variable ( T for temperature and c for solute concentration), κX is the respective diffusion coefficient, and νw is the water flow rate from Equation (3).
Isotopic compositions are derivable from the redistribution of solutes during freezing (Reference Rooney, Blankenship, Alley, Bentley, Thomson, Crame and ThomsonSouchez and Lorrain, 1991, p. 46 and 55), and for simplicity we assume that all solutes are rejected from liquid pore water that freezes.
The above equations are fundamental for treating the response of subglacial sediments to basal freeze-on. Quantitative treatment of the combined effect of supercooling, thermally driven hydraulic gradients, and the flow of water, heat and solutes is needed in order to infer the history of sub-ice-sheet hydrology from basal ice facies.
Theoretical Treatment of Ice Dynamics
By assumption, steady ice-stream flow is restricted to periods of basal melting. Whereas basal melting is an inherently destructive process, basal freeze-on leaves a record of subglacial hydrology (Reference Boulton and SpringBoulton and Spring, 1986). Basal freeze-on also leaves a record of thermal conditions in the basal zone. Slow-moving ice sheets and interstream ridges are not influenced significantly by frictional heat due to the absence of basal sliding. Here, physical changes in the basal zone stem from climatic changes at the ice-sheet surface. Climatic signals from fluctuations in air temperature and accumulation rate are, however, dampened significantly by thermal diffusion when the ice thickness is large (Reference Alley, Cuffey, Evenson, Strasser, Lawson and LarsonAlley and others, 1997). The effect of temperature on strain rate in ice is important when modeling the downward propagation of oscillating surface temperatures. For calculation of the temperature-dependent strain rate,
, we use (Reference HookeHooke, 1998, equation 4.8):
where
is a reference strain rate, k = 025oc–1
is a constant, and t is the temperature, taken here for simplicity to be the weighted mean
where z is height above bed and h is ice thickness.
The elevation change accompanying changes in surface temperature and accumulation rate, b, is (Reference Padilla and VilleneuvePaterson, 1994, p. 256–257):
where m is the basal melting rate. The vertical ice velocity at the ice-sheet surface is thus ws = -b - m_ + ∂h/∂t The ice-temperature changes induced by climatic variation can be derived from a diffusion–advection equation of the form (Reference Padilla and VilleneuvePaterson, 1994, p. 216):
where T i is ice temperature, κ i is the thermal diffusivity of ice and uz = ws(z/h) is the vertical ice velocity (Reference Padilla and VilleneuvePaterson, 1994, p. 220). The basal heat budget is (Reference Alley, Cuffey, Evenson, Strasser, Lawson and LarsonAlley and others, 1997):
where G is geothermal heat flux, θ b is the basal temperature gradient, ki is thermal conductivity of ice, τb is the basal shear stress, which is given by the Mohr–Coulomb failure criterion when smaller than the driving stress τd, ub is basal ice velocity given by Reference RaymondRaymond (1996, equation 38) or Reference Tulaczyk, Kamb and EngelhardtTulaczyk (2000a, equation 15), and l is coefficient for latent heat of fusion.
Numerical Experiments
Here we present two numerical experiments. The first experiment simulates changes in the basal zone during ice-stream stagnation accompanied/triggered by basal freeze-on. The second numerical experiment simulates changes in the basal zone of an interstream ridge induced solely by climatic signals. The model contains two numerical modules: (1) an ice column represented by 51 nodes, and (2) a till column represented by 101 nodes. The two modules are coupled via heat balance and mass balance. In our ice-stream simulations, basal freeze-on is induced by prescribing a basal temperature gradient that is just steep enough to generate a slightly negative basal energy balance. This perturbation triggers a runaway process in which latent heat gradually replaces frictional heat in the basal heat balance. With the equations outlined above, we study the associated changes in subglacial pressure distribution, porosity distribution, solute concentration, basal ice formation and isotopic composition. In both experiments equilibrium freeze-on is obtained because we assume that water can beadded to the simulated ice–sediment system from a ground-water source below the till. This source may be Tertiary glaciomarine diamictons found abundantly in the Ross Sea basin (Reference AndersonAnderson,1999) and inferred to be present beneath much of the grounded portions of the West Antarctic ice sheet, including the UpB area of Whillans Ice Stream (Reference Raymond, Echelmeyer, Whillans, Doake, Alley and BindschadlerRooney and others, 1991; Reference Tulaczyk, Mickelson and AttigTulaczyk and others, 1998; Reference Souchez, Tison and JouzelStudinger and others, 2001).
Experiment 1: ice stream
Here, our aim is to study the transition from lithostatic to hydrostatic, and finally to cryostatic, pressure distribution in a sub-ice-stream till layer with a finite thickness of 5 m. Due to a relatively modest time-scale of this model run (1000 years) we keep the ice thickness and the surface temperature constant. The subglacial changes are induced solely by the changes in ice dynamics due to ice-stream slow-down. The model is set up to emulate the well-studied UpB basal zone of Whillans Ice Stream. This numerical simulation builds on the undrained plastic bed model proposed by Reference Tulaczyk, Kamb and EngelhardtTulaczyk and others (2000b). Here, an initial, infinitesimal basal perturbation in basal freezing is sufficient to bring the ice–till system into an unstable state, which results in shutdown of the ice stream. We use the modern climate record to induce a steady-state temperature profile in the ice. Values for constant properties and initial values for time-dependent parameters and model variables are listed inTable 1.The initial fast-ice velocity is 460 m a–1.
Table 1. list of constants, time-dependent parameters and model variables in the ice-stream simulation
Experiment 2: interstream ridge
In this case, we study changes in the basal zone of an interstream ridge over the last glacial–interglacialcycle. In contrast to the previous case, we include sub-till sediments into a basal zone that is 50 m thick. Having a thick sedimentary sequence allows us to estimate how deep freeze-on-induced pressure changes can propagate from the ice–sediment interface. Based on the paleoclimatic record from the Vostok ice core (Reference PetitPetit and others, 1999), we simulate the behavior of an ice divide within an interstream ridge over the last 125000 years. We assume a constant geothermal heat flux. Variations in the heat budget are therefore controlled by the climatic surface signal, which causes the fluctuations in the basal temperature gradient, and latent heat released through freeze-on during cold-based periods. Values for constant properties and initial values for time-dependent parameters and model variables are listed in Table 2.
Table 2. list of constants, time-dependent parameters and model variables in the interstream ridge simulation
Results
Experiment 1: signatures at the base of a stopped ice stream
When ice-stream flow ceases, significant changes take place in the subglacial pressure system. Results of our calculations are presented in Figure 4, which illustrates changes in the basal zone during the first 400 years of basal freezing. During the remaining 600 model years, no major changes occur since the model has reached a quasi-steady state. During the simulation, basal freeze-on extracts subglacial water from the lubricating bed, and a layer of accretion ice develops. The bed strengthens due to dewatering of the till. Slow-down of the ice stream brings an end to significant till mixing (∼49 years of freezing), and the basal zone starts adjusting to hydrostatic pressure conditions. Excess pore water flows upward from the lower part of the till during the transition from lithostatic to hydrostatic conditions (Fig. 4a). In our model, the expulsion of pore water produces a water film at the ice–till interface as longas the basal freezing rate is smaller than the rate of pore-water discharge. In the presented case, the film attains amaximum thickness of 58 mm (at ∼100years of freezing). Eventually, basal freeze-on consumes the water film (∼158 years of freezing). At this point, the subglacial pressure system is hydrostatic. However, another pressure condition arises, when free basal water in a film (or distributed basal water system) is no longer present at the ice–till interface. This shortage of water creates a deficit in the basal heat budget. Hence, the ice base, together with the liquid pore water at the top of the till, becomes supercooled. In response to supercooling, acryostatic flow of pore water arises in the till ( ∼175 freezing years). This marks a fairly abrupt change in the basal zone, as seen in Figure 4a–c.The ice stream comes to a complete stop. Thermally driven hydraulic gradients arise, and basal freeze-on starts to consume pore water extracted from the till. After an additional 85 years (∼260 freezing years), a cryostatic equilibrium is obtained because the hydraulic gradient is large enough to withdraw water from the sedimentary source below the till. At this stage, the total pore-water pressure has been lowered by >60 kPa (Fig. 4b). The associated increase in effective pressure results in a porosity reduction from 40% to about 32% (Fig. 4c).
Fig. 4. Depth–time diagrams illustrating changes in the basal zone during ice-stream stagnation. Glacier ice is shown and the accreted basal ice layer is shown in white.The colour scale denotes vertical distribution of: (a) excess pore-water (kPa), (b) total pore-water pressure (MPa), and (c) porosity (%). Label “Li” refers to lithostatic conditions, “Hy” to hydrostatic conditions, and “Cr”to cryostatic conditions.
An interesting effect of basal freeze-on is that the thermodynamic processes at the ice–till interface leave a record in the overlying ice. The basal supercooling associated with the shortage of free basal water diffuses into the ice-temperature profile. Figure 5 shows how this basal signal propagates into the lower 300 m of glacier ice. Measurements of temperatures near the base of an ice stream experiencing freeze-on may provide a basis for estimating when basal freezing was initiated. This could help determine whether basal freeze-on is just a result or a cause of ice-stream stoppage.
Fig. 5. Depth–time diagram illustrating changes in ice temperature induced by subglacial supercooling and basal freeze- on. The colour scale denotes the difference between simulated ice-temperature distribution and the initial ice-temperature distribution at the onset of freezing.
After a few centuries (>260 years), there are no significant changes in the ice–till system since the upward transport of sub-till water matches the growth rate of basal ice (∼4.5 mm a–1). The basal ice layer gains a thickness of 4.2 m over 1000 years of basal freezing. Figure 6a illustrates how solutes accumulate at the ice–till interface due to rejection of solutes during the freezing process. High concentration of solutes near an ice base could provide another indication of basal freeze-on, if appropriate measurements can be made in subglacial sediments. Since solute diffusion and advection are well-quantifiedprocesses, data on vertical distribution of solute concentration in subglacial sediments may be potentially used to back-calculate the timing of initiation of basal freeze-on. Extraction of sediment pore water by basal freeze-on should also leave a signal in the stable-isotope composition of basal ice and subglacial pore water. Rayleigh fractionation will change with time the isotopic make-up of both substances (Fig. 6b).
Fig. 6. Diagrams illustrating geochemical effects of basal freezing (blue) and basal melting (red): (a) increase in solute at the ice–till interface beneath a stopping ice stream; (b) vertical ¯18O profile in basal ice and subglacial 1000 years of basal freezing; (c) changes in solute concentration at the ice–till interface of an interstream ridge; (d) vertical profile in basal ice and till beneath the simulated interstream ridge prior to Holocene basal melting. Label (1) designates transition between glacier ice and accretion ice, while (2) is the ice–till interface.
Experiment 2: signatures in the basal zone of interstream ridges
Physical changes in the basal zone of interstream ridges are subtle due to the absence of frictional heat in the basal heat budget. Nevertheless, our modeling of an interstream ridge also shows considerable changes in the basal zone because freezing acts over long periods of time. Figure 7 shows fluctuations in surface temperature (Fig. 7a) and accumulation rate (Fig. 7b) since the last interglacial period 125 000 years ago.We use these data to force the temporal evolution of the ice-temperature field in our calculations. The temperature record is from the Vostok ice core (Reference PetitPetit and others, 1999), and changes in accumulation rate have been calculated using a common assumption of 5.3% of decrease in accumulation with each degree of cooling (Reference Van der VeenVan der Veen, 1999, equation 11.5.14). We have assumed that the reference accumulation rate is 0.122 ma–1 of pure ice at the present-day temperature of Siple Dome (Reference Gades, Raymond, Conway and JacobelHamilton, 2002). These climatic variations influence the basal zone despite significant dampening of the surface signal. The calculated changes in the basal temperature gradient are ∼5000 years out of phase with the surface conditions (Fig.7c).
Fig. 7. Model results displaying ice-sheet response to variations in surface temperature (a) and accumulation rate (b) paleoclimatic record from the Vostok ice core by Reference PetitPetit and others (1999) ). Illustrated here are changes in the basal gradient (c) and ice-thickness changes (d) during a full glacial cycle of 125 000 years.
The climatic forcing applied in this simulation (Fig. 7a and b) triggers two periods of basal freezing (Fig. 8). A small freezing event occurs at ∼108 kyrBP but it lasts for 5 5 kyr and has only small effects. The second, major freezing event starts at ∼62 kyrBP and lasts for approximately 45 kyr. Figure 8a shows that this event influences excess pore-pressure distribution to depths of 440 m even though the freezing rate never exceeds 1mm a–1. Figure 8b illustrates changes in the total pore-water pressure, which reflect variations in excess pore pressure shown in Figure 8a but also mirror ice-thickness changes (up to 230 m, as seen in Fig. 7d). High levels of effective pressure may occur in the upper part of the sedimentary column due to cryostatic suction, and the porosity may thus decrease from 40% to ∼35% at the ice–till interface (Fig. 8c).
Fig. 8. Depth–time diagrams illustrating pressure and porosity changes in the basal zone of an interstream ridge during 125 000 years. Glacier ice is shown in black, and the accreted basal ice layer is shown in white. (a), (b) and (c) correspond cases described in the caption of Figure 4.
The accreted basal ice layer attains its maximum thickness of 19.9 m just after the Last Glacial Maximum (at ∼15000 BP). The subsequent switch to basal melting reduces the thickness of the basal layer to 12.1 m.This result demonstrates that climatically driven basal freeze-on beneath interstream ridges may produce an accreted basal ice layer, which is as thick as the basal layers observed at the base of Ice Stream C (Reference EngelhardtEngelhardt, 2001; Carsey and others, in press). The water used up in generation of these layers comes, in our model, both from extraction of pre-existing sediment pore water and from a deeper ground-water source. Freeze-on-induced depression of subglacial water pressures may be sufficient to drive regional ground-water flow that brings meltwater generated at the base of active ice streams to the basal zones of interstream ridges. Subsequent incorporation of ice from interstream ridges into active ice streams may give rise to thick layers of sediment-laden basal ice, such as those found near camp UpC (Carsey and others, in press).
While the total amount of basal accretion is 20.3 m during the entire glacial cycle, the total amount of basal melt is 23.1 m. As expected, initial melting rate is relatively fast due to interglacial conditions. However, basal melting is also fast at the end of the model run, i.e. in the simulated late Holocene. This is not a realistic result since measurements show ice below pressure-melting temperature at the base of at least two interstream ridges (Reference Engelhardt and KambEngelhardt and Kamb, 1993; Reference KambKamb, 2001).The premature, simulated switch from basal freezing to melting is mainly due to thickening of the ice column by ∼230m during the last 15000 model years (Fig. 7d). This thickening event is due to an increase in accumulation rate of approximately 50% (Fig. 7b). Thickening promotes developmentof low basal temperature gradients on a long-termbasis, but the pressure-melting point at the bed responds instantly to changes in the overburden pressure. Clearly, we know that the West Antarctic ice sheet has been thinning dramatically during the Holocene (Reference Conway, Hall, Denton, Gades and WaddingtonConway and others, 1999). In our opinion, this unsatisfactory performance of our model is caused by the fact that thickness of real interstream ridges is primarily driven by thinning/thickening of ice streams around them (Reference NakanoNereson and Raymond, 2001). Our treatment of ice dynamics is more suitable for a simple ice dome (Reference Price and WhillansRaymond, 1983) and does not include the necessary boundary forcing due to activity of nearby ice streams.
In spite of the limitations of our model, it clearly demonstrates that changes in the basal thermal regime produce significant changes throughout the basal zone. Figure 6c shows solute concentration at the ice–till interface during multiple melting/freezing events. Melting dilutes the pore water, while solute rejection during basal freeze-on increases the solute content at the ice–till interface. For interstream ridges, the isotopic composition of the basal ice and the underlying sediments reflects a low freeze rate ( 5 1 mma–1). Such a profile (Fig. 6d) should be recognizable in basal ice cores and in subglacial till cores.
Conclusions
In a set of numerical simulations, we have explored changes in the basal zones of ice streams and interstream ridges. A new thermodynamic treatment of basal freeze-on based on concepts from frost-heave simulations provides the basis for simulating thermally induced pore-water flow in sub-ice-sheet environments. For ice streams, this subglacial water flow is capable of triggering ice-stream stoppage, due to consumption of free water present at the ice–till interface and subsequent withdrawal of pore water from underlying subglacial sediments. Till dewatering and consolidation is triggered by supercooling, which arises from surface tension effects that inhibit ice growth in pore spaces of fine-grained subglacial sediments. Supercooling should leave a distinct signature in the temperature profile of the overlying glacier ice. It should also be associated with reduced water pressures at the ice–till interface. Both effects may be measurable in subglacial boreholes. When release of latent heat becomes significant in the basal zone, thick layers of debris-laden basal ice may develop. Such layers have been observed in many of the deep ice cores drilled to the base of modern ice sheets. Freeze-on-driven extraction of subglacial pore water leads to lowered porosity values in the subglacial sediments. Beneath stopped ice streams, the porosity changes are most pronounced near the ice–till interface. However, thermally induced hydraulic gradients may reach depths of 50 m or more when climatically controlled freeze-on occurs over tens of thousands ofyears. Regional-scale pore-water gradients induced between areas of basal melting and regions of basal freezing may force deep subglacial ground-water flow. The basal meltwater produced beneath active ice streams may thus be driven towards the ice base of interstream ridges where basal freeze-on is ongoing.
Acknowledgements
Partial financial support for this research was provided by the U.S. National Science Foundation (grants NSF-OPP 9873593 and 0096302), Kaj og Hermilla Ostenfeld’s Fond and Knud Højgaard’s Fond.
