Antalya Nappes

Mainly composed of algal and foraminiferal limestones, the Changhsingian constitutes the uppermost part of the middle to upper Permian rocks (Özgül, Reference Özgül, Tekeli and Göncüoğlu1984; Şahin and Altıner, Reference Şahin and Altıner2019; Altıner et al., Reference Altıner, Özkan-Altıner, Atasoy and Şahin2021a). Capped by an ooidal limestone level less than 1 m thick, the Changhsingian carbonates are conformably overlain by microbial limestones or stromatolites of the Kokarkuyu Formation (Altıner, Reference Altıner1981) of Griesbachian age in the Gazipaşa, Demirtaş, Çürükdağ, and Koçular–Barak sections and unconformably overlain by the variegated shales of the Akıncıbeli Formation of Olenekian age at the Olimpus sections (Fig. 1). The lower boundary of the Changhsingian stage with the underlying Wuchiapingian strata was observed only in the Gazipaşa and Olimpus sections.

Coordinates of the bases of the measured sections are as follows: Gazipaşa ASRTP: 36°21′33″N, 32°22′39″E; ÖRCN: 36°19′60″N, 32°21′37″E. Demirtaş TRLR: 36°28′57″N, 32°15′05″E; DD: 36°28′36″N, 32°14′36″E. Olimpus OLP-1/1: 36°23′05″N, 30°27′31″E; OLP-1/2: 36°23′26″N, 30°27′35″E; OLP-3: 36°23′35″N, 30°27′25″E. Kesmeboğazı KSMBGZ: 36°36′01″N, 30°29′12″E. Çürükdağ ÇÜ-1: 36°41′30″N, 30°27′38″E. Koçular–Barak BRK-1: 37°44′44″N, 31°05′58″E.

Aladağ Nappe

The Changhsingian stage in the Hadim, Taşkent, and Aygörmez Dağı sections, like in the Antalya Nappes, conformably overlies the Wuchiapingian carbonates (Fig. 1). Entirely composed of algal and foraminiferal micritic limestones, the last 60 cm of the Changhsingian is composed of ooidal limestone. At the Permian–Triassic boundary, the youngest oolitic bed is overlain by the lowermost Griesbachian stromatolites and microbial limestones (Altıner, Reference Altıner1981; Özgül, Reference Özgül1997; Altıner and Özgül, Reference Altıner and Özgül2001).

Coordinates of the base of measured sections in the Aladağ Nappe are as follows: Hadim AR-1: 36°53′08″N, 32°23′01″E; AR-2: 36°52′51″N, 32°23′26″E. Taşkent TCX: 36°48′42″N, 32°33′03″E; DT: 36°48′22″N, 32°33′18″E. Aygörmez Dağı ST: 38°46′12″N, 36°13′05″E; K: 38°45′16″N, 36°14′10″E.

Geyik Dağı Parautochthon/Autochthon

Located in the eastern segment of the Taurides, the Changhsingian carbonates (coordinates of the base of the section: Köserelik Tepe KT: 38°14′47″N, 36°21′47″E) overlie the Wuchiapingian without any obvious unconformity (Fig. 1) and are capped by an ooidal limestone layer, which is the typical lithology indicating the top of the Permian System in the Southern Biofacies Belt (Altıner et al., Reference Altıner, Özkan-Altıner, Koçyiğit, Bozkurt, Winchester and Piper2000). Microbial limestones and stromatolites of the Griesbachian Kokarkuyu Formation (Altıner, Reference Altıner1981) of the Katarası Group (Özgül et al., Reference Özgül, Metin, Erdoğan, Göğer, Bingöl and Baydar1973) overlie the Changhsingian carbonates.

Remarks

Class Fusulinata, possessing a microgranular low-Mg calcite wall, commonly to frequently occurs in the Changhsingian Stage of the Southern Biofacies Belt in Turkey (Altıner et al., Reference Altıner, Özkan-Altıner, Koçyiğit, Bozkurt, Winchester and Piper2000). Among smaller foraminiferal families of Fusulinata, Endothyridae Rhumbler, Reference Rhumbler1895, and Bradyinidae Reitlinger, Reference Reitlinger1950, are rare and sporadic; Paleotextulariidae Galloway, Reference Galloway1933, Endotebidae Vachard et al., Reference Vachard, Martini, Rettori and Zaninetti1994, and Tetrataxidae Pokorny, Reference Pokorny1958, are absent. However, Globivalvulinidae Reitlinger, Reference Reitlinger1950, is diverse and abundant, represented by several genera and species.

Remarks

As previously stated by Altıner et al. (Reference Altıner, Özkan-Altıner, Atasoy and Şahin2021a), globivalvulinid foraminifera evolved rapidly and split into subgroups with distinct evolutionary trends during the middle to late Permian. This evolution occurred in two major lineages: (1) the globivalvulins, which exhibit globular chambers; and (2) the dagmaritins, which exhibit angular chambers. From these two lineages, the globivalvulins, comprising Globivalvulina Schubert, Reference Schubert1921, and all allied genera, were subdivided into two subfamilies by Gaillot and Vachard (Reference Gaillot and Vachard2007): Globivalvulininae Reitlinger, Reference Reitlinger1950, and Paraglobivalvulininae Gaillot and Vachard, Reference Gaillot and Vachard2007. Vachard (Reference Vachard2018) directly adopted this taxonomy. In this study, we propose Retroseptellininae new subfamily, grouping some of the phylogenetically related taxa previously included either in Globivalvulininae or Paraglobivalvulininae. The second taxon that we describe as Paraglobivalvulina? intermedia n. sp. is considered to be an early lineage and to represent the ancestral state in the evolution of the subfamily Paraglobivalvulininae.

Type genus

Retroseptellina Gaillot and Vachard, Reference Gaillot and Vachard2007.

Other genera

Septoglobivalvulina Lin, Reference Lin1978; Paraglobivalvulinoides Zaninetti and Jenny-Deshusses, Reference Zaninetti and Jenny-Deshusses1985.

Diagnosis

A subfamily of Globivalvulinidae mainly characterized by a thin, dense, and simple microgranular wall; earlier irregularly coiled biserial taxa evolute and semi-involute with long apertural flaps and septa curved backward; later taxa involute, with almost entirely enveloping last chamber, hooklike apertural flaps, and interseptal secondary partitions.

Occurrence

Wordian–Changhsingian, Tethys (Lin, Reference Lin1978; Zaninetti and Jenny-Deshusses, Reference Zaninetti and Jenny-Deshusses1985; Köylüoğlu and Altıner, Reference Köylüoğlu and Altıner1989; Gaillot and Vachard, Reference Gaillot and Vachard2007; Vachard, Reference Vachard2018).

Remarks

In many of the earlier and some of the recent studies, the specimens belonging to retroseptellinin foraminifera were identified either under the genus Globivalvulina or the genus Paraglobivalvulina Reitlinger, Reference Reitlinger1965, of biserially enrolled globivalvulinid stock (Bozorgnia, Reference Bozorgnia1973; Lys et al., Reference Lys, Colchen, Bassoullet, Marcoux and Mascle1980; Altıner, Reference Altıner1981; Johnson, Reference Johnson, Neale and Brasier1981; Zaninetti and Altıner, Reference Zaninetti and Altıner1981; Jenny-Deshusses, Reference Jenny-Deshusses1983; Kotlyar et al., Reference Kotlyar, Zakharov, Kochirkevich, Kropacheva, Rostovtsev, Chediya, Vuks and Guseva1984, Reference Kotlyar, Zakharov, Kropachova, Pronina, Chediya and Burago1989; Pasini, Reference Pasini1985; Noe, Reference Noe1987; Köylüoğlu and Altıner, Reference Köylüoğlu and Altıner1989; Ueno and Sakagami, Reference Ueno and Sakagami1993; Kobayashi, Reference Kobayashi1997, Reference Kobayashi2004; Pronina-Nestell and Nestell, Reference Pronina-Nestell and Nestell2001; Ünal et al., Reference Ünal, Altıner, Yılmaz and Özkan-Altıner2003; Jenny et al., Reference Jenny, Guex, Stampfli and Richoz2009; Koehrer et al., Reference Koehrer, Zeller, Aigner, Poeppelreiter, Milroy, Forke and Al-Kindi2010; Nestell et al., Reference Nestell, Kolar-Jurkovšek, Jurkovšek and Aljinović2011). In the taxonomic revision of the family Globivalvulinidae and its genera, Gaillot and Vachard (Reference Gaillot and Vachard2007) recognized Retroseptellina as a member of the subfamily Globivalvulininae, and placed Septoglobivalvulina and Paraglobivalvulinoides in the subfamily Paraglobivalvulininae. In subsequent studies, these authors did not strictly follow this classification. Gaillot et al. (Reference Gaillot, Vachard, Galfetti and Martini2009) placed Retroseptellina, Septoglobivalvulina, and Paraglobivalvulinoides in the subfamily Globivalvulininae. Vachard (Reference Vachard2018) preferred to keep Retroseptellina and Septoglobivalvulina in the subfamily Globivalvulininae and placed Paraglobivalvulinoides in the subfamily Paraglobivalvulininae.

In the description of Retroseptellininae n. subfam., comprising Retroseptellina (R. decrouezae [Köylüoğlu and Altıner, Reference Köylüoğlu and Altıner1989], Fig. 2.1–2.5; R. globosa [Wang in Zhao et al., Reference Zhao, Sheng, Yao, Liang, Chen, Lin and Liao1981], Fig. 2.6–2.8), Septoglobivalvulina (S. distensa [Wang in Zhao et al., Reference Zhao, Sheng, Yao, Liang, Chen, Lin and Liao1981], Fig. 2.9–2.12; S. guangxiensis Lin, Reference Lin1978, Fig. 2.13–2.15), and Paraglobivalvulinoides (P. gracilis [Zaninetti and Altıner, Reference Zaninetti and Altıner1981], Fig. 2.16–2.19; P. septulifer [Zaninetti and Altıner, Reference Zaninetti and Altıner1981], Fig. 3.1), the morphologic changes within a certain lineage characterized by a distinct wall structure are considered as the main criteria to define this new subfamily, rather than classifying these genera under two previously defined subfamilies, as seen in the study of Gaillot and Vachard (Reference Gaillot and Vachard2007).

Figure 2.

Specimens belonging to Retroseptellininae new subfamily from Changhsingian carbonates of southern Turkey. (1–5) Retroseptellina decrouezae (Köylüoğlu and Altıner, Reference Köylüoğlu and Altıner1989); (6–8) Retroseptellina globosa (Wang in Zhao et al., Reference Zhao, Sheng, Yao, Liang, Chen, Lin and Liao1981); (9–12) Septoglobivalvulina distensa (Wang in Zhao et al., Reference Zhao, Sheng, Yao, Liang, Chen, Lin and Liao1981); (13–15) Septoglobivalvulina guangxiensis Lin, Reference Lin1978; (16–19) Paraglobivalvulinoides gracilis (Zaninetti and Altıner, Reference Zaninetti and Altıner1981). (1) TCX 40.5; (2) TCX 47; (3) ST 660; (4) TCX 35; (5) DT 1; (6, 16) TK 2.05 (equivalent of DT 14); (7) TCX 4; (8, 14) DD 6; (9) AR-1 666; (10) BRK 9; (11) ST 683; (12) DT 11; (13) DT 12; (15) ST 662; (17) ST 663; (18) ST 664; (19) DT 5. Scale bars = 100 μm.

Figure 3.

Specimens belonging to Retroseptellininae new subfamily, Globivalvulininae, and Paraglobivalvulininae from Changhsingian carbonates of southern Turkey (af = apertural flap). (1) Paraglobivalvulinoides septulifer (Zaninetti and Altıner, Reference Zaninetti and Altıner1981); (2) Globivalvulina vonderschmitti Reichel, Reference Reichel1946; (3) Paraglobivalvulina mira Reitlinger, Reference Reitlinger1965; (4–11) Paraglobivalvulina? intermedia new species, (4) holotype, sample ST 666, thin section B (Aladağ Nappe, Aygörmez Dağı, ST section). (1) DT 12; (2) AR-1 677; (3) K 4027; (4, 8) ST 666; (5) ST 658; (6) ST 659; (7) TCX 43; (9) TCX 40.5; (10) TCX 45; (11) AR-1 678. Scale bars = 100 μm.

The evolution of the retroseptellinin lineage separately from globivalvulinins and paraglobivalvulinins, with a thin and simple microgranular wall, a long and folded apertural flap, and irregular coiling, was first proposed by Altıner and Özkan-Altıner (Reference Altıner and Özkan-Altıner2001), who considered Retroseptellina (given there as Globivalvulina decrouezae Köylüoğlu and Altıner, Reference Köylüoğlu and Altıner1989, the type species of Retroseptellina Gaillot and Vachard, Reference Gaillot and Vachard2007) as the root stock of this evolution. Altıner and Özkan-Altıner (Reference Altıner and Özkan-Altıner2001) further stated that even highly evolved Paraglobivalvulinoides could be linked to the evolutionary lineage of Retroseptellina and Septoglobivalvulina characterized by a very fine-grained, thin- and single-layered microgranular wall. Thus, following Altıner and Özkan-Altıner (Reference Altıner and Özkan-Altıner2001), this group of thin and microgranular wall-bearing foraminifera comprising forms characterized by evolute to semi-involute to completely involute tests are gathered together within Retroseptellininae n. subfam. in this study. We agree again with Altıner and Özkan-Altıner (Reference Altıner and Özkan-Altıner2001) in interpreting that the completely involute, globular chambered, true paraglobivalvulinid forms were derived from the Globivalvulina graeca–Globivalvulina vonderschmitti lineage characterized by the granular aspect of their multilayered walls (see also the description of the walls of the types of the Globivalvulina species in Reichel, Reference Reichel1946). Globivalvulina vonderschmitti Reichel, Reference Reichel1946 (Fig. 3.2) and Paraglobivalvulina mira Reitlinger, Reference Reitlinger1965 (Fig. 3.3) from our Changhsingian material clearly display the granular aspect of the wall structure of globivalvulinins and paraglobivalvulinins, which is markedly different from the compact, dense, and thin microgranular wall structure of retroseptellinin genera. Thus, the globivalvulinids, which are characterized by globular chambers in the middle to late Permian, are divided into two distinct groups distinguished by wall composition and structure: Globivalvulininae (including the paraglobivalvulinins of Gaillot and Vachard, Reference Gaillot and Vachard2007) and Retroseptellininae n. subfam. In a recent study, Gennari and Rettori (Reference Gennari and Rettori2019), agreeing with the scheme proposed by Altıner and Özkan-Altıner (Reference Altıner and Özkan-Altıner2001), also considered the Retroseptellina–Septoglobivalvulina lineage as a separate evolutionary trend derived from a Globivalvulina ancestor.

Type species

Paraglobivalvulina mira Reitlinger, Reference Reitlinger1965, from the territory of Transcaucasus.

Holotype

The specimen is from sample ST 666, thin section B (Aladağ Nappe, Aygörmez Dağı, ST section) (Fig. 3.4).

Diagnosis

A species doubtfully assigned to Paraglobivalvulina with evolute to semi-involute coiling, apertural flaps displaying either hook-shaped or planar, straight sections defining sometimes narrow V-shaped structures between the opposing chambers and weakly developed interseptal secondary partitions.

Occurrence

Changhsingian. ST, TCX, AR-1, and DT sections of the Aladağ Nappe in the eastern and central Taurides, Turkey (Fig. 1). Earliest known occurrence is from the upper Capitanian of the Hakkari region, SE Anatolia (Köylüoğlu and Altıner, Reference Köylüoğlu and Altıner1989).

Description

The evolute to semi-involute test of Paraglobivalvulina? intermedia n. sp. consists of three to four pairs of biserial chambers coiled in 1–1.5 whorls. Globular to subglobular chambers increase rapidly in height. Early chambers are semi-involute, last pair of chambers are nearly evolute, not embracing the previous chambers. Apertural flaps in the second and third pairs of chambers are sometimes short and hook-shaped or in the form of long, straight planes attached to septal edges. In axial or tangential sections, the apertural flaps define a narrow V-shaped structure between the opposing chambers of the last pair. Poorly developed interseptal secondary partitions are visible in some sections. The wall, with a thin hyaline outer layer, is granular, sometimes thick, like that of the typical Paraglobivalvulina.

Etymology

We have used the species name ‘intermedia’ in order to define the transitional character of the new species between Globivalvulina and Paraglobivalvulina.

Microfossil association

Several foraminiferal species occur in association with Paraglobivalvulina? intermedia n. sp. The most commonly encountered species are Paynita permotaurica Altıner et al., Reference Altıner, Özkan-Altıner, Atasoy and Şahin2021a, Paradagmarita monodi Lys in Lys and Marcoux, Reference Lys and Marcoux1978, P. planispiralis Gaillot and Vachard, Reference Gaillot and Vachard2007, Paradagmacrusta callosa Gaillot and Vachard, Reference Gaillot and Vachard2007, Louisettita elegantissima Altıner and Brönnimann, Reference Altıner and Brönnimann1980, Septoglobivalvulina distensa, Okimuraites linae (Vachard and Gaillot in Vachard et al., Reference Vachard, Gaillot, Vaslet and Le Nindre2005), Ichthyofrondina latilimbata (Sellier de Civrieux and Dessauvagie, Reference Sellier de Civrieux and Dessauvagie1965), I. palmata (Wang in Nanjing Institute of Geology and Paleontology, 1974), Nestellorella acus (Pronina, Reference Pronina1989), Nodosinelloides sagitta (Miklukho-Maklay, Reference Miklukho-Maklay1954), Robuloides lens Reichel, Reference Reichel1946, R. acutus Reichel, Reference Reichel1946, Calvezina ottomana Sellier de Civireux and Dessauvagie, Reference Sellier de Civrieux and Dessauvagie1965, and Aulacophloia martiniae Gaillot and Vachard, Reference Gaillot and Vachard2007.

Dimensions

Diameter of proloculus: 100–120 μm (holotype: 120 μm). Diameter of test: 520–780 μm (holotype: 780 μm). Width of test: 500–620 μm (holotype: 620 μm). Diameter/width: 1.04–1.27 (holotype: 1.26). Height of last chamber: 260–380 μm (holotype: 380 μm). Thickness of wall: 25–35 μm (holotype: 35 μm).

Remarks

Paraglobivalvulina? intermedia n. sp. differs from Paraglobivalvulina mira, type species of the genus Paraglobivalvulina of Reitlinger (Reference Reitlinger1965), in having semi-involute to evolute coiling instead of being totally involute. As can be seen in the specimen illustrated from the Changhsingian material (Fig. 3.3), Paraglobivalvulina mira is characterized by the resorption of the initial spire within the chambers of the last pair of the test. Paraglobivalvulina? intermedia n sp. differs also from the Globivalvulina graeca–G. vonderschmitti lineage (see Fig. 3.2, G. vonderschmitti Reichel, Reference Reichel1946), from which it probably originated, by the absence of the inner pseudofibrous layer in the wall structure, the presence of apertural flaps showing morphological variations from hook-shaped to straight, planar sections, and weakly developed interseptal secondary partitions. By these morphological features, P.? intermedia n. sp. is interpreted as an intermediate species establishing the evolutionary link between Globivalvulina and Paraglobivalvulina. The new species has been doubtfully assigned to Paraglobivalvulina because of the absence of a totally involute test.

Globivalvulina graeca Reichel, Reference Reichel1946, illustrated by Canuti et al. (Reference Canuti, Marcucci and Pirini Radrizzani1970, fig. 14.1) from the Hazro area (SE Anatolia, Turkey) should be referred to P.? intermedia n. sp. Several forms reported as Paraglobivalvulina mira in the morphological analysis of biserially enrolled involute foraminifera of Tethys by Zaninetti and Altıner (Reference Zaninetti and Altıner1981), from the Changhsingian of the Geyikdağı autochthon/parautochthon (eastern Taurides) by Zaninetti et al. (Reference Zaninetti, Altıner and Çatal1981), and the middle–upper Permian of the Hakkari region (SE Anatolia) by Köylüoğlu and Altıner (Reference Köylüoğlu and Altıner1989) are synonyms of Paraglobivalvulina? intermedia n. sp. The specimen doubtfully referred to G. vonderschmitti from the Changhsingian of the Aladağ Nappe in the eastern Taurides by Altıner (Reference Altıner1981) should also be considered as an intermediate form between Globivalvulina and Paraglobivalvulina mira. Forms illustrated as “aberrant morphologies for Paraglobivalvulina” in Jenny and Guex (Reference Jenny and Guex2005, fig. 3c) also belong to Paraglobivalvulina? intermedia n. sp. Some of the P. mira specimens reported from the Changhsingian of the Kuh-e Surmeh section (Zagrides, Iran) by Gaillot and Vachard (Reference Gaillot and Vachard2007, pl. 32, figs. 3, 19; pl. 39, figs. 4–7) also should be considered as P.? intermedia n. sp. because the last pair of chambers in these specimens does not strongly envelop the earlier ones and morphological variations in the apertural flaps of these forms are similar to our specimens.

Remarks

This class, consisting of foraminifers with porcelaneous walls, occurs commonly to frequently in the Changhsingian material of the Southern Biofacies Belt in Turkey (Fig. 1). The morphologically primitive families Calcivertellidae Reitlinger in Vdovenko et al., Reference Vdovenko, Rauzer-Chernousova, Reitlinger and Sabirov1993, Agathamminidae Ciarapica, Cirilli, and Zaninetti in Ciarapica et al., Reference Ciarapica, Cirilli, Passeri, Trincati and Zaninetti1987, and Cornuspiridae Schultze, Reference Schultze1854, are generally sporadic; however, more-advanced families comprising Hemigordiidae Reitlinger in Vdovenko et al., Reference Vdovenko, Rauzer-Chernousova, Reitlinger and Sabirov1993, Neodiscidae Lin, Reference Lin1984, Baisalinidae Loeblich and Tappan, Reference Loeblich and Tappan1986a, and Hemigordiopsidae Nikitina, Reference Nikitina1969, are common to frequent, sometimes in rock-forming abundance. Among new taxa described in this study, Midiellidae n. fam., characterized by sigmoidal coiling, adds to the taxonomic inventory of the families of Miliolata. Pseudomidiella sahini n. sp. belongs to this new family. The other new species, Glomomidiellopsis? okayi, belongs to the family Hemigordiopsidae, which encompasses the largest forms of the Paleozoic Miliolata.

Type genus

Midiella Pronina, Reference Pronina1988.

Other genera

Pseudomidiella Pronina-Nestell in Pronina-Nestell and Nestell, Reference Pronina-Nestell and Nestell2001.

Diagnosis

A family of the class Miliolata characterized by involute tests with lateral thickenings and sigmoidal coiling. In advanced genera, the second tubular chamber divided into pseudochambers by short, triangular pseudosepta. Aperture a simple opening at the end of the tubular chamber.

Occurrence

Middle–upper Permian, Tethys (Altıner, Reference Altıner1978, Reference Altıner1981; Gaillot and Vachard, Reference Gaillot and Vachard2007; Vachard, Reference Vachard2018). Questionable occurrence in the lower Permian (Gaillot and Vachard, Reference Gaillot and Vachard2007).

Remarks

Based on the types of Hemigordius bronnimanni Altıner, Reference Altıner1978 (re-illustrated in Altıner, Reference Altıner1981, Reference Altıner, Tekeli and Göncüoğlu1984, and in a drawing in Altıner et al., Reference Altıner, Savini and Özkan-Altıner2003), Pronina (Reference Pronina1988) established the genus Midiella for Hemigordius-like inflated forms characterized by sigmoidal coiling. Pronina-Nestell in Pronina-Nestell and Nestell (Reference Pronina-Nestell and Nestell2001) classified Midiella and her newly created genus Pseudomidiella within the subfamily Hemigordiinae Pronina, Reference Pronina1994, of the family Hemigordiopsidae. In Vachard (Reference Vachard2018), Midiella was questionably placed in the family Neodiscidae and Pseudomidiella in Baisalinidae. In this study, considering the phyletic relations of the porcelaneous foraminifera in the late Paleozoic, we group Midiella and Pseudomidiella within the same lineage and erect Midiellidae as a new family, housing these porcelaneous foraminifera with a sigmoidal coiling trend.

Type species

Pseudomidiella labensis Pronina-Nestell in Pronina-Nestell and Nestell, Reference Pronina-Nestell and Nestell2001, from northwestern Caucasus, Severnaya Ravine, Nikitan calcareous lithofacies (algal-foraminiferal limestone).

Pseudomidiella sahini new species
Figure 4.7–4.12

Reference Altıner1981

Baisalina pulchra Reitlinger; Altıner, pl. 45, figs. 7, 8.

Reference Altıner, Tekeli and Göncüoğlu1984

Baisalina pulchra; Altıner, pl. 2, fig. 8.

Figure 4.

Specimens belonging to Hemigordiopsidae, Midiellidae new family, and Robuloididae from Changhsingian carbonates of southern Turkey (ap = aperture). (1–6) Glomomidiellopsis? okayi new species, (1) holotype, sample ST 671, thin section C (Sarpkaya Tepe, ST section); (7–12) Pseudomidiella sahini new species, (8) holotype, sample K 4028, thin section B (Aladağ Nappe, Aygörmez Dağı, K section); (13–18) Robuloides lata new species, (14) holotype, sample DD 4, thin section number 1 (Antalya Nappes, Demirtaş area, DD section). (1) ST 671; (2, 3, 9) ST 673; (4) DD 10; (5, 6) ST 665; (7, 8, 10–12) K 4028; (13) TCX 40.5; (14, 15) DD 4; (16, 18) DD 6; (17) TCX 11. Scale bars = 100 μm.

Holotype

Sample K 4028, thin section B (Aladağ Nappe, Aygörmez Dağı, K section) (Fig. 4.8).

Diagnosis

A species of Pseudomidiella with an inflated lenticular to ovate test consisting of six to eight whorls. Midiella-like sigmoidal coiling with three to five whorls in the early stage, tending later to become oscillating to planispiral. Five to six pseudochambers divided by triangular pseudosepta in the final whorl.

Occurrence

Changhsingian. K and ST sections of the Aladağ Nappe in the eastern Taurides, Turkey (Fig. 1).

Description

The population of Pseudomidiella sahini n. sp. consists of two different generations. The microspheric generation, following a small proloculus, is characterized by a Midiella-like sigmoidal coiling and consists of three to five whorls in the initial stage and sigmoidal to planispiral coiling in the last two to three whorls (Fig. 4.7, 4.8). The position of the coiling axis gradually changes, rotating 90° from the initial stage to the adult stage. In the megalospheric generation, the sigmoidal coiling, which is irregular in the initial stage, tends to become more regular in the adult stage (Fig. 4.9). The height of the tubular chamber increases more prominently toward the last whorls. The test is inflated lenticular to ovate in axial sections with considerable lateral thickenings. Pseudosepta are visible starting from the third whorl. The number of pseudochambers divided by triangular pseudosepta is generally five in the last whorl. The wall is thick, compared to the volume of the test, and the aperture is at the open end of the pseudochambers partly closed by pseudosepta.

Etymology

Pseudomidiella sahini n. sp. is dedicated to the geologist Nazif Şahin from the Turkish Petroleum Corporation (TPAO) for his contributions to the understanding of tectonic structure and stratigraphy of the Tauride Belt in Turkey.

Microfossil association

Pseudomidiella sahini n. sp. is associated with a large number of foraminiferal species including Paradagmarita monodi, Dagmarita chanakchiensis Reitlinger, Reference Reitlinger1965, Louisettita elegantissima, Paraglobivalvulina mira, Codonofusiella sp., Glomomidiellopsis lysitiformis Gaillot and Vachard, Reference Gaillot and Vachard2007, Hemigordius irregulariformis Zaninetti, Altıner, and Çatal, Reference Zaninetti, Altıner and Çatal1981, Midiella bronnimanni (Altıner, Reference Altıner1978), and Polarisella elabugae (Cherdyntsev, Reference Cherdyntsev1914).

Dimensions

Diameter of proloculus: 50–60 μm (microspheric), 100 μm (macrospheric) (holotype 50 μm). Diameter of test: 730–1240 μm (holotype: 970 μm). Width of test: 600–860 μm (holotype: 710 μm). Diameter/width: 1.22–1.44 (holotype: 1.36). Height of lumen of last whorl: 100–120 μm (holotype: 100 μm). Thickness of wall: 30–40 μm (holotype: 30 μm).

Remarks

Pseudomidiella sahini n. sp. differs from Pseudomidiella labensis by a more inflated test, smaller D/W ratio, and thicker wall. The sigmoidal coiling in the initial stage of P. sahini n. sp. is nearly identical to the sigmoidal coiling of Midiella both in size and number of whorls. However, P. sahini n. sp. is characterized in the adult stage by the presence of pseudosepta dividing the tubular chamber into pseudochambers.

Baisalina pulchra reitlingerae, introduced as a new subspecies by Lys in Lys et al. (Reference Lys, Colchen, Bassoullet, Marcoux and Mascle1980) from a Changhsingian limestone block of the Lamayuru unit (Himalaya Ladakh) in the Induan suture zone, differs from Pseudomidiella sahini n. sp. by the absence of sigmoidal coiling in the initial stage and a greater number of pseudosepta in the final whorl. We argue that taxonomic revision is necessary to refine the Permian evolutionary lineages of larger, pseudosepta-bearing Miliolata, including the plexus of pseudosepta-bearing forms defined under Baisalina pulchra by Lys in Lys et al. (Reference Lys, Colchen, Bassoullet, Marcoux and Mascle1980). Sections of Baisalina pulchra illustrated from the eastern Taurides (Turkey) by Altıner (Reference Altıner1981) displaying pseudosepta are synonymized under P. sahini n. sp. Neodiscus milliolides Miklukho-Maklay, Reference Miklukho-Maklay1953, figured from the Changhsingian of Slovenia by Nestell et al. (Reference Nestell, Kolar-Jurkovšek, Jurkovšek and Aljinović2011, pl. 2, fig. 3), is close to some of the specimens of P. sahini n. sp. in having a sigmoidal coiling in the early stage and an inflated test. However, it is not certain whether this form has pseudosepta in the adult stage.

Type species

Glomomidiellopsis tieni Gaillot and Vachard, Reference Gaillot and Vachard2007, from the Kuh-e Surmeh outcrop (Zagros, Iran).

Holotype

The specimen comes from sample ST 671, thin section C (Fig. 4.1), Sarpkaya Tepe (ST) section.

Diagnosis

A large and globular hemigordiopsid foraminiferal species comprising two stages of growth: an early streptospiral stage consisting of five to ten whorls and a later stage with widely oscillating four or five whorls and a marked increase in the height of the tubular chamber.

Occurrence

Changhsingian. ST, TCX, and AR-1 sections of the Aladağ Nappe and the DD section of the Antalya Nappes in the Taurides, southern Turkey (Fig. 1). The earliest known well-dated occurrence is from the upper Capitanian of Cambodia (Nguyen, Reference Nguyen1979).

Description

The large, laterally compressed globular test is characterized by two stages of growth of the tubular chamber. Following a small and spherical proloculus, the initial stage of the test consists of five to ten streptospirally coiled whorls. Around the proloculus, the coiling is tight in the first three or four whorls. Later, the wall thickens due to flosculinization, and the initial stage appear to be a marked lump in the center of the test. The lumen of the tubular chamber hardly increases in height in this stage. The adult stage of the test consists of four to six widely oscillating whorls. The lumen of the tubular chamber increases markedly, twice or three times more than the height of the lumen of the initial stage. It usually appears in half-moon shaped sections. Slight constrictions or irregularities in the lumen of the tubular chamber are related either to the section orientation or diagenetic processes affecting the test. The aperture is probably an opening at the end of the tubular chamber.

Etymology

Glomomidiellopsis? okayi n. sp. is dedicated to the late Prof. Dr. Aral I. Okay from the Istanbul Technical University, Turkey, for his great contributions to the petrology, stratigraphy, and tectonics of Turkey.

Microfossil association

Glomomidiellopsis? okayi n. sp. is accompanied by many foraminiferal species, among which Paynita permotaurica, Paradagmarita monodi, P. planispiralis, Paradagmacrusta callosa, Louisettita elegantissima, Paraglobivalvulina mira, Paraglobivalvulinoides gracilis, Glomomidiellopsis uenoi, G. lysitiformis, Nodosinelloides sagitta, Polarisella elabugae, and Robuloides lens are the most common and important ones.

Dimensions

Diameter of proloculus: 40–70 μm (holotype: 70 μm). Diameter of test: 1120–1500 μm (holotype: 1350 μm). Width of test: 840–1010 μm (holotype: 1000 μm). Diameter/width: 1.14–1.50 (holotype: 1.35). Height of lumen of deuteroloculus in initial stage: 30–40 μm (holotype: 40 μm). Height of lumen of deuteroloculus in adult stage: 70–100 μm (holotype: 100.μm). Thickness of wall: 30–60 μm (holotype: 60 μm).

Remarks

Glomomidiellopsis? okayi n. sp. differs from Kamurana bronnimanni (type species of the genus Kamurana Altıner and Zaninetti, Reference Altıner and Zaninetti1977, from the Changhsingian of eastern Taurides, Turkey) by the absence of the third stage of growth containing perforations in the wall. Hemigordiopsis? speciosus Nikitina, Reference Nikitina1969, from the Capitanian of the southern Sikhote-Alin (Russia), superficially resembles G.? okayi n. sp. However, the former species is characterized by nearly planispiral coiling in the adult stage and more than ten rudimentary septa in the final whorl. In addition, the initial stage of the coiling is not clearly visible in the holotype of H.? speciosus, preventing conclusive taxonomic analysis.

In earlier studies, large porcelaneous forms characterized by streptospiral coiling and two stages of growth of the second chamber were classified as either Hemigordius sp. ‘en pelote’ (Altıner, Reference Altıner1981; Zaninetti et al., Reference Zaninetti, Altıner and Çatal1981; Ciarapica et al., Reference Ciarapica, Cirilli, Martini and Zaninetti1986) or Kamurana sp. (Nguyen, Reference Nguyen1979; Vuks and Chediya, Reference Vuks and Chediya1986; Vachard and Ferrière, Reference Vachard and Ferrière1991; Leven and Okay, Reference Leven and Okay1996; Pronina and Nestell, Reference Pronina, Nestell, Ross, Ross and Brenckle1997; Kobayashi, Reference Kobayashi2006a, Reference Kobayashib). In Zaninetti et al. (Reference Zaninetti, Altıner and Çatal1981), the specimens illustrated as Hemigordius sp. ‘en pelote’ comprise forms belonging either to Neodiscopsis of Gaillot and Vachard (Reference Gaillot and Vachard2007) or to G.? okayi n. sp. Sections illustrated as Kamurana? sp. by Vachard and Miconnet (Reference Vachard and Miconnet1990) from the upper Murgabian (= Wordian?) of the Monte Facito (southern Italy) are related neither to G.? okayi n. sp. nor to Kamurana. The specimen illustrated in Vachard and Miconnet (Reference Vachard and Miconnet1990, pl. 2, fig. 11) is Hemigordiopsis, whereas the specimen illustrated in Vachard and Miconnet (Reference Vachard and Miconnet1990, pl. 3, fig. 8) is probably a section of Neodiscopsis. Glomomidiellopsis? okayi n. sp., illustrated as Kamurana or Neodiscus sp. by Altıner and Özkan-Altıner (Reference Altıner and Özkan-Altıner1998) from the Salamis Island (Greece), occurs together with several Changhsingian markers including Baudiella stampflii Altıner and Özkan-Altıner, Reference Altıner and Özkan-Altıner1998, Nanlingella meridionalis Rui and Sheng, Reference Rui and Sheng1981, Reichelina cribroseptata Erk, Reference Erk1941, Reichelina changhsingensis Sheng and Chang, Reference Sheng and Chang1958, Colaniella parva (Colani, Reference Colani1924), and Colaniella leei (Wang, Reference Wang1966).

Some of the sections of foraminifera described and illustrated as Glomomidiellopsis uenoi and G. tieni from the Kuh-e Dena and Kuh-e Surmeh sections of Zagros (Iran) by Gaillot and Vachard (Reference Gaillot and Vachard2007) should be attributed to G.? okayi n. sp. because they display a clear increase in the height of the tubular chamber corresponding to the second stage of growth of the new species. It should be noted here that although the increase in the height of the tubular chamber was given in the diagnosis of G. tieni, the holotype (Gaillot and Vachard, Reference Gaillot and Vachard2007, pl. 65, fig. 11) and paratypes (Gaillot and Vachard, Reference Gaillot and Vachard2007, pl. 65, figs. 1–6, 13) from the Lopingian of the Kuh-e Surmeh section do not clearly display this character. However, several other specimens identified as G. tieni by Gaillot and Vachard (Reference Gaillot and Vachard2007) clearly display this character in the second stage of growth of the tubular chamber and are placed in synonymy under G.? okayi n. sp.

We describe Glomomidiellopsis? okayi with a question mark in the genus affiliation because of the presence of the second stage of growth in tubular chamber, which is clearly absent in the typical Glomomidiellopsis species, which are characterized by low chamber height throughout the ontogeny. We also interpret some sections of Neodiscopsis specialis (Lin, Li, and Sun, Reference Lin, Li and Sun1990) illustrated from the offshore Fars area (Iran) in Gaillot and Vachard (Reference Gaillot and Vachard2007) as belonging to our new species, which is characterized by streptospiral coiling in the initial stage followed by widely oscillating whorls of the second chamber, which increases in height. In addition, Neodiscopsis sp. illustrated from the Guadalupian of the Saiq Formation of the Sultanate of Oman by Koehrer et al. (Reference Koehrer, Zeller, Aigner, Poeppelreiter, Milroy, Forke and Al-Kindi2010) is also G.? okayi n. sp.

We suggest the origination of Kamurana from G.? okayi n. sp., in contrast to Vachard et al. (Reference Vachard, Rettori, Angiolini and Checconi2008), who considered Neodiscopsis specialis (Lin, Li and Sun, Reference Lin, Li and Sun1990) (given as N. spectabilis, which is an invalid species name) as the ancestor of Kamurana bronnimanni Altıner and Zaninetti, Reference Altıner and Zaninetti1977. The basis for our suggestion is the presence of streptospiral coiling in the initial stage of G.? okayi n. sp., which closely resembles the initial stage of K. bronnimanni. The initial stage of N. specialis is characterized, on the contrary, by nearly aligned (planispiral) coiling.

Remarks

This class, characterized by a pseudofibrous or fibrous hyaline wall and sometimes associated with a thin, inner dark lining probably made up of microgranular calcite, occurs frequently in the studied Changhsingian deposits of the Tauride Belt. Among the late Paleozoic families, Syzraniidae Vachard in Vachard and Montenat, Reference Vachard and Montenat1981, Protonodosariidae Mamet and Pinard, Reference Mamet and Pinard1992, Geinitzinidae Bozorgnia, Reference Bozorgnia1973, Robuloididae Reiss, Reference Reiss1963, Frondinidae Gaillot and Vachard, Reference Gaillot and Vachard2007, Pachyphloiidae Loeblich and Tappan, Reference Loeblich and Tappan1984, and Ichthyolariidae Loeblich and Tappan, Reference Loeblich and Tappan1986b, are frequent. However, Nodosinellidae Rhumbler, Reference Rhumbler1895, Partisaniidae Loeblich and Tappan, Reference Loeblich and Tappan1984, and Colaniellidae Fursenko in Rauzer-Chernousova and Fursenko, Reference Rauzer-Chernousova and Fursenko1959, are totally absent in the Changhsingiian. Most of the new taxa described in this study, including several new genera and species, belong to the highly diverse Robuloididae.

Remarks

Following Vachard (Reference Vachard2018), all weakly or fully coiled Permian genera of the Class Nodosariata are lumped into this family in this study.

The taxonomy of the fully coiled group in the family Robuloididae, comprising Robuloides Reichel, Reference Reichel1946, Hubeirobuloides Lin, Li, and Zhang in Lin et al., Reference Lin, Li and Sun1990, and Gourisina Reichel, Reference Reichel1946, has been enriched by the addition of Robuloides lata n. sp., Robuloides? rettorii n. sp., and Pseudorobuloides reicheli n. gen. n. sp. Plectorobuloides taurica n. gen. n. sp., characterized by skewed coiling, is another taxon added to this group.

From the weakly coiled second group, including Eocristellaria Miklukho-Maklay, Reference Miklukho-Maklay1954, Calvezina Sellier de Civrieux and Dessauvagie, Reference Sellier de Civrieux and Dessauvagie1965, and Cryptomorphina Sellier de Civrieux and Dessauvagie, Reference Sellier de Civrieux and Dessauvagie1965, Calvezina anatolica n. sp., which is characterized by a large test tending to become rectilinear, is described from the Changhsingian of the Taurides. Pseudocryptomorphina amplimuralis n. gen. n. sp., doubtfully assigned to Robuloididae, is also added to this second group.

The third group in the Family Robuloididae comprises only the genus Eomarginulinella Sosnina, Reference Sosnina1969, which is characterized by an incipiently coiled test followed by rectilinear, globular chambers. Eomarginulinella galinae n. sp. with its slender longitudinal sections is among the youngest known species in the genus.

Type species

Robuloides lens Reichel, Reference Reichel1946, from Hydra Island, Greece.

Holotype

The specimen comes from sample DD 4, thin section number 1 (Antalya Nappes, Demirtaş area, DD section) (Fig. 4.14).

Diagnosis

A species of Robuloides with a lozenge-shaped axial section, smaller dimensions, and a smaller diameter/width ratio.

Occurrence

Changhsingian, DD section of the Antalya Nappes, DT and TCX sections of the Aladağ Nappe, Taurides, southern Turkey (Fig. 1).

Description

The planispiral and involute test of the new species consists of a spherical proloculus and three to four whorls increasing rapidly in height. The final whorl, comprising nine to ten chambers, terminates with a sharp angle at the periphery of the test. The axial section is typically lozenge shaped. Lateral growth is very prominent and achieved by the lamellar thickenings symmetrically developed around the axis of coiling. Wall is hyaline, usually recrystallized and probably pseudofibrous. Septa are slightly curved, and the aperture is areal, located on the lower half of the septal face.

Etymology

In Latin, one of the meanings of ‘lata’ is wide or broad, which describes the test morphology of the new species.

Microfossil association

In the studied Changhsingian samples, Robuloides lata n. sp. co-occurs with a great number of foraminiferal species. The most characteristic species include Paynita permotaurica, Paradagmarita monodi, P. planispiralis, Louisettita elegantissima, Septoglobivalvulina distensa, S. guangxiensis, Paraglobivalvulinoides gracilis, Robuloides lens, Robuloides acutus, and Polarisella elabugae.

Dimensions

Diameter of proloculus: 20–30 μm (holotype: 25 μm). Diameter of test: 120–230 μm (holotype: 210 μm). Width of test: 90–150 μm (holotype: 150 μm). Diameter/width: 1.33–1.53 (holotype: 1.4). Height of last chamber: 30–50 μm (holotype: 50 μm). Thickness of wall: 10–20 μm (holotype: 20 μm).

Remarks

Robuloides lata n. sp. differs from Robuloides lens in having a lozenge-shaped axial section, instead of being lenticular or inflated lenticular, and a smaller diameter/width ratio.

Specimens identified as R. lens by Lin (Reference Lin1984) from the Yangtze Gorge area (China) probably belong to R. lata n. sp. The specimen illustrated as Robuloides lens from the Hazro area (Arabian Platform, SE Turkey) by Gaillot and Vachard (Reference Gaillot and Vachard2007) is nearly identical to the holotype of Robuloides lata n. sp. Robuloides cf. R. lens reported from the uppermost Changhsingian of northwestern Serbia by Nestell et al. (Reference Nestell, Sudar, Jovanovic and Kolar-Jurkovšek2009) should also be included into the population of R. lata n. sp.

Robuloides? rettorii new species
Figure 5.8–5.15, 5.16?

Reference Gaillot and Vachard2007

Robuloides sp.; Gaillot and Vachard, p. 136, pl. 79, fig. 26.

Reference Korchagin2011

Robuloides sp.; Korchagin, pl. 2, figs 25, 26.

Reference Nestell, Kolar-Jurkovšek, Jurkovšek and Aljinović2011

Robuloides acutus Reichel, Reference Reichel1946; Nestell et al., pl. 2, fig. 26.

Reference Ke, Luo, Wei, Kou, Zhang and He2018

Robuloides acutus; Ke et al., fig. 9.10, 9.11.

Figure 5.

Specimens belonging to Robuloididae from Changhsingian carbonates of southern Turkey (ap = aperture). (1–5) Robuloides lens Reichel, Reference Reichel1946; (6, 7) Robuloides acutus Reichel, Reference Reichel1946; (8–16) Robuloides? rettorii new species, (8) holotype, sample AR-1 682 (Aladağ Nappe, Hadim AR-1 section); (17–31, 32?, 33?) Pseudorobuloides reicheli new genus new species, (17, 18) holotype, sample TCX 30, thin section number 2 (Aladağ Nappe, Taşkent TCX section); (34–38) Plectorobuloides taurica new genus new species, (34) holotype, sample TCX 32, thin section number 2 (Aladağ Nappe, Taşkent TCX section). (1) DD 3; (2) DT 13; (3) DT 3; (4) TCX 4; (5, 7, 13, 16) TCX 40.5; (6) DD 6; (8) AR-1 682; (9, 28) TCX 11; (10) TCX 22; (11, 23) TCX 38.5; (12, 15) TCX 35; (14, 19, 31, 33) DT 1; (17, 18, 26) TCX 30; (20) K 4034; (21) DT 12; (22) TCX 41; (24) DT 8; (25) TCX 39.5; (27) KT 190; (29, 32) TCX 36; (30) TCX 38; (34) TCX 32; (35) TCX 34; (36) TCX 42.5; (37) TCX 47.5; (38) DT 11. Scale bars = 100 μm.

Holotype

The specimen comes from sample AR-1 682 (Fig. 5.8), Aladağ Nappe, Hadim AR-1 section.

Diagnosis

A species of robuloidid foraminifer of smaller dimensions with a lenticular, involute test becoming evolute in the final whorl.

Occurrence

Changhsingian, AR-1, DT, and TCX sections of the Aladağ Nappe and DD section of the Antalya Nappes, central Taurides, Turkey (Fig. 1).

Description

The test, planispiral and lenticular with laterally compressed sides, is composed of a spherical and medium-sized proloculus and three whorls, rather rapidly increasing in height. The initial 2–2.5 whorls are involute with poorly developed lamellar thickenings. At this stage, the coiling axis could be slightly oblique to the coiling axis of the final whorl. The final half whorl is evolute, never extends to overlap the inner involute whorls in axial sections and forms a lateral thickening on the sides of the test. The final whorl typically contains nine chambers. Wall is hyaline and pseudofibrous. Septa are curved, probably undulating close to the test wall in the involute part. The aperture is areal, a rounded hole located on the lower half of the septal face.

Etymology

Robuloides? rettorii n. sp. is dedicated to Prof. Dr. Roberto Rettori from the University of Perugia, Italy, for his contributions to the taxonomy of Permian and Triassic foraminifera.

Microfossil association

Robuloides? rettorii n. sp. occurs in association with a great number of foraminiferal species in the Changhsingian samples. The most commonly encountered species are Paradagmarita monodi, P. planispiralis, Paradagmacrusta callosa, Dagmarita chanakchiensis, Louisettita elegantissima, Septoglobivalvulina distensa, Globivalvulina lukachiensis Nestell et al., Reference Nestell, Kolar-Jurkovšek, Jurkovšek and Aljinović2011, Robuloides lens, and Rectostipulina quadrata Jenny-Deshusses, Reference Jenny-Deshusses1985.

Dimensions

Diameter of proloculus: 20–35 μm (holotype: 30 μm). Diameter of test: 135–235 μm (holotype: 150 μm). Width of test: 50–100 μm (holotype: 70 μm). Diameter/width: 2.0–2.7 (holotype: 2.14). Height of last chamber: 35–50 μm (holotype: 40 μm). Thickness of wall: 5–10 μm (holotype: 10 μm).

Remarks

Gaillot and Vachard (Reference Gaillot and Vachard2007) reported for the first time the presence of specimens becoming evolute at the end of the coiling. Robuloides sp., illustrated from the Lopingian of Zagros by Gaillot and Vachard (Reference Gaillot and Vachard2007, pl. 79, fig. 26), is placed as a synonym under Robuloides? rettorii n. sp. We insert a question mark in the genus affiliation because this evolute character of Robuloides? rettorii n. sp. does not fit the description of the genus Robuloides, which is characterized by involute coiling. This character of exhibiting an evolute last whorl is probably an intermediate step in the evolution of robuloidid forms from R.? rettorii n. sp. to Pseudorobuloides n. gen. Poorly illustrated specimens as Robuloides sp. from the Global Stratotype (GSSP) of the Permian–Triassic boundary, Bed 27, Meishan, South China by Korchagin (Reference Korchagin2011, pl. 2, figs. 25, 26) also belong to Robuloides? rettorii n. sp.

Among previously described Robuloides species, Robuloides acutus seems to be morphologically close to R.? rettorii n. sp. However, R. acutus (Fig. 5.6, 5.7) differs from our new species in having a completely involute test where the last whorl overlaps the inner whorls with a lamellar thickening. Moreover, in R.? rettorii n. sp., the last whorl terminating on the sides of the test does not embrace the inner whorls. Even a specimen sectioned parallel to the equatorial plane displays the evolute character of the last whorl (Fig. 5.13). In the involute part of the test, septa extend toward the center of the test, whereas in the evolute final half whorl, septa do not extend to overlap the inner involute whorls. The specimens illustrated as R. acutus from the upper Changhsingian of Slovenia by Nestell et al. (Reference Nestell, Kolar-Jurkovšek, Jurkovšek and Aljinović2011, pl. 2, fig. 26) and the Meishan D section, Zhejiang, China by Ke et al. (Reference Ke, Luo, Wei, Kou, Zhang and He2018, fig. 9.10, 9.11) should be referred to R.? rettorii n. sp. because the evolute coiling is clearly visible in the axial sections of these specimens.

Type species

Pseudorobuloides reicheli new species.

Diagnosis

A small, discoidal, biumbilicate and planispiral robuloidid test with sharply angular periphery. Involute coiling in the early stage, later semi-involute to evolute. Lateral lamellar thickenings completely absent in the involute stage.

Occurrence

Changhsingian of the Antalya Nappes, Aladağ Nappe and the Geyik Dağı parautochthon/autochthon of Taurides (southern Turkey). Lopingian of Zagros (Iran) (Gaillot and Vachard, Reference Gaillot and Vachard2007) and the Changhsingian of the Julfa area (southwestern Iran) (Mohtat-Aghai et al., Reference Mohtat-Aghai, Vachard and Krainer2009).

Etymology

The prefix pseudo- is used to name this new genus that superficially appears to be Robuloides.

Remarks

The new genus Pseudorobuloides differs from Robuloides of Reichel (Reference Reichel1946) in having a biumbilicate and discoidal test, absence of lateral thickenings in the involute stage, and a tendency to become evolute at the end of the ontogenesis. The change in coiling style of smaller robuloidid foraminifera broadly evokes the evolution of the genus Millerella Thompson, Reference Thompson1942, with an involute to evolute test from the genus Eostaffella Rauzer-Chernousova, Reference Rauzer-Chernousova1948, characterized by an involute to slightly evolute test in the Carboniferous ozawainelloid foraminifera (see the phylogenetical reconstruction of Maslo and Vachard, Reference Maslo and Vachard1997, fig. 1).

Holotype

The specimen is from sample TCX 30, thin section number 2 (Fig. 5.17, 5.18), Aladağ Nappe, Taşkent TCX section.

Diagnosis

Type species of Pseudorobuloides n. gen. with a small, discoidal, and subcarinate test including three involute to evolute, planispiral whorls, eight to nine chambers in the last whorl, and a high diameter/width ratio.

Occurrence

Changhsingian. TCX, DT, AR-1, K, and KT sections of the Aladağ Nappe and DD section of the Antalya Nappes, Taurides, southern Turkey (Fig. 1).

Description

The test is discoidal and biumbilicate with a sharply angled periphery defining a somewhat keeled margin. Following a small proloculus, the coiling is planispiral with three whorls, rapidly increasing in height in the final whorl. The initial two whorls are involute, never forming a lamellar thickening on the sides of the test, contrary to the presence of lamellar thickenings in the genus Robuloides. The final whorl is semi-involute to evolute and consists of eight to nine chambers. The wall is hyaline, similar to that of Robuloides and usually recrystallized. The aperture is rounded and located on the lower half of the slightly curved septal face.

Etymology

Pseudorobuloides reicheli n. sp. is dedicated to the late Prof. Manfred Reichel (Switzerland) for his great contribution to the taxonomy of Paleozoic, Mesozoic, and Cenozoic foraminifera, including the discovery of the genus Robuloides from the Permian of Hydra Island, Greece.

Microfossil association

Pseudorobuloides reicheli n. sp. is found in association with more than 100 species of foraminifera in the Changhsingian samples from southern Turkey. The most commonly encountered species are Paradagmarita monodi, Paynita permotaurica, Paradagmacrusta callosa, Louisettita elegantissima, Retroseptellina decrouezae, Septoglobivalvulina distensa, S. guangxiensis, Glomomidiellopsis lysitiformis, Rectostipulina pentamerata Groves, Altıner, and Rettori, Reference Groves, Altıner and Rettori2005, Polarisella elabugae, Nestellorella acus, Nodosinelloides mirabilis caucasica (Miklukho-Maklay, Reference Miklukho-Maklay1954), Eomarginulinella typica (Sosnina, Reference Sosnina1967), Robuloides lens, and Frondina permica Sellier de Civrieux and Dessauvagie, Reference Sellier de Civrieux and Dessauvagie1965.

Dimensions

Diameter of proloculus: 15–25 μm (holotype: 25 μm). Diameter of test: 140–225 μm (holotype: 220 μm). Width of test: 50–75 μm (holotype: 70 μm). Diameter/width: 2.4–3.14 (holotype: 3.14). Height of last chamber: 35–60 μm (holotype: 50 μm). Thickness of wall: 5–10 μm (holotype: 7 μm).

Remarks

Specimens illustrated as evolute Robuloides from the Lopingian of Zagros (Iran) by Gaillot and Vachard (Reference Gaillot and Vachard2007) are morphologically very similar to Pseudorobuloides reicheli n. gen. n. sp., characterized by the absence of laterally thickened lamellae, discoidal tests, and involute to evolute coiling.

The tangential section identified as Robuloides sp. from the Changhsingian of the Zal section of the Julfa area (northwestern Iran) by Mohtat-Aghai et al. (Reference Mohtat-Aghai, Vachard and Krainer2009, pl. 2, fig. 28) also should be referred to P. reicheli n. sp. in having a discoidal test and the absence of laterally thickened lamellae.

Type species

Plectorobuloides taurica new species.

Diagnosis

A small, lenticular to inflated-lenticular robuloidid genus displaying an abrupt change in the direction of coiling during the early stage of ontogeny, later becoming planispiral and involute.

Occurrence

Changhsingian of the Aladağ Nappe and the Antalya Nappes, Taurides (southern Turkey).

Etymology

The prefix plecto- from Latin means twist, turn, or bend. It is used in the name of Plectorobuloides n. gen. in order to express its coiling character.

Remarks

Plectorobuloides n. gen. differs from Robuloides Reichel, Reference Reichel1946, by an abrupt change in the direction of coiling and the absence of lateral lamellar thickenings. The evolution of Plectorobuloides n. gen. within the robuloidid foraminifera late in the Permian, with its twisted coiling, resembles the evolution of Carboniferous ozawainelloid foraminifera (Maslo and Vachard, Reference Maslo and Vachard1997). Although there are differences in detail between robuloidid and ozawainelloid foraminiferal stocks, the derivation of Plectostaffella Reitlinger, Reference Reitlinger1971, with twisted coiling from an eostaffellid stock in the late Serpukhovian to early Bashkirian (more precisely from the genus Eostaffellina Reitlinger, Reference Reitlinger1963), is similar to the derivation of Plectorobuloides n. gen. in the late Changhsingian from the robuloidid stock. This change in coiling mode seems to be a common event in the evolution of lenticular, multilocular, and planispiral stocks of late Paleozoic foraminifera.

Holotype

The specimen is from sample TCX 32, thin section number 2 (Fig. 5.34), Aladağ Nappe, Taşkent TCX section (Fig. 1).

Diagnosis

A species of Plectorobuloides n. gen. characterized by a small, lenticular to inflated-lenticular test with a sharply angled periphery. Coiling, with three to four whorls, twisted in the early stage of the test, later planispiral and involute.

Occurrence

Late Changhsingian, TCX and DT sections of the Aladağ Nappe and DD section of the Antalya Nappes, Taurides, southern Turkey (Fig. 1).

Description

The lenticular to inflated-lenticular test with a sharply angled periphery consists of three to four whorls. Following a rounded proloculus of moderate size, the initial whorl is tightly coiled. A slight change in the position of the coiling axis of the second whorl is succeeded by a more accentuated change in the coiling direction in the third whorl, giving the test a highly asymmetric profile in the axial section. In the last whorl, the coiling axis returns to coincide more or less with the coiling axis of the initial whorl and the test becomes planispiral and involute. The number of the chambers in the last whorl is not known. The wall is similar to that of Robuloides, hyaline, pseudofibrous, and usually recrystallized. The aperture is a rounded hole in the lower part of the septal face.

Etymology

The species name ‘taurica’ refers to the chain of Taurus Mountains where the type locality of the new species is located.

Microfossil association

Plectorobuloides taurica n. gen. n. sp. co-occurs with a great number of foraminiferal species in the Changhsingian. From these forms, the most commonly encountered are Paynita permotaurica, Paradagmarita monodi, P. planispiralis, Paradagmacrusta callosa, Paraglobivalvulina mira, Retroseptellina decrouezae, Paraglobivalvulinoides gracilis, Sphaerulina crassispira Lee, Reference Lee1934, Midiella zaninettiae (Altıner, Reference Altıner1978), Rectostipulina quadrata, Robuloides lens, and Frondina permica.

Dimensions

Diameter of proloculus: 20–30 μm (holotype: 25 μm). Diameter of test: 150–245 μm (holotype: 210 μm). Width of test: 80–140 μm (holotype: 120 μm). Diameter/width: 1.72–1.94 (holotype: 1.75). Height of last chamber: 35–60 μm (holotype: 45 μm). Thickness of wall: 8–10 μm (holotype: 10 μm).

Remarks

The specimen illustrated as Robuloides lens from the Lopingian of the Hazro area (Arabian Platform, SE Anatolia) by Gaillot and Vachard (Reference Gaillot and Vachard2007, pl. 82, fig. 12) seems to display a change in the coiling direction in the earlier whorls and is questionably assigned to the population of P. taurica n. gen. n. sp.

Type species

Calvezina ottomana Sellier de Civrieux and Dessauvagie, Reference Sellier de Civrieux and Dessauvagie1965, from south of the Village of Çukurköy (Akseki, southern Turkey).

Calvezina anatolica new species
Figure 6.1–6.4

?Reference Gaillot and Vachard2007

Calvezina sp.; Gaillot and Vachard, p. 133–134, pl. 90, fig. 15.

Figure 6.

Specimens belonging to Robuloididae and Pachyphloiidae from Changhsingian carbonates of South Turkey (ap = aperture). (1–4) Calvezina anatolica new species, (1) holotype, sample DT 1, thin section number 2 (Aladağ Nappe, Taşkent DT section); (5–10) Eomarginulinella galinae new species, (5) holotype, sample DT 11, thin section number 1 (Aladağ Nappe, Taşkent DT section); (11, 12) Eomarginulinella typica (Sosnina, Reference Sosnina1967); (13) Eomarginulinella sp.; (14–19) Pseudocryptomorphina amplimuralis new genus new species, (15) holotype, sample TCX 8, thin section number 2 (Aladağ Nappe, Taşkent, TCX section); (20, 21, 22?, 23) Robustopachyphloia farinacciae new species, (20) holotype, sample TRLR 194 (Antalya Nappes, Demirtaş TRLR section); (24–27) new pachyphloiidid genus?; (28) higher magnification of part of (27); notice regularly spaced canal-like pores crossing the successive laminae. (1) DT 1; (2) TCX 0; (3) TCX 7; (4) TCX 17; (5, 8, 9, 12) DT 11; (6) AR-1 669; (7) AR-1 681; (10) AR-1 664; (11) TCX 38; (13) TK 1.06 (equivalent of DT 13); (14) TCX 10; (15) TCX 8; (16) TCX 21; (17) TCX 17; (18) DD 8; (19) ST 656; (20) TRLR 194; (21, 23) DD 15; (22) TRLR 206; (24) ST 663; (25) K 4034; (26) DT 4; (27, 28) TCX 11. Scale bars = 100 μm.

Holotype

Sample DT 1, thin section number 2 (Fig. 6.1), Aladağ Nappe, Taşkent DT section (Fig. 1).

Diagnosis

An elongate test of large dimensions, ovate in transverse section. Early marginuline-like stage with three to four arcuate chambers, followed by two uniserial rectilinear chambers.

Occurrence

Changhsingian. DT, TCX, AR-1, and AR-2 sections of the Aladağ Nappe and DD section of the Antalya Nappes, central Taurides, southern Turkey (Fig. 1).

Description

Large test consists of a small proloculus followed by six chambers rapidly increasing in height in two distinct stages. The initial stage is marginuline-like and characterized by three to four weakly coiled chambers. In longitudinal frontal section, these chambers appear arcuate and asymmetrical with thin septa. In the late stage of ontogeny, the chambers are rectilinear, uniserial, and symmetrical and they do not show any sign of coiling. The test is ovate in transverse section. The wall is hyaline, pseudofibrous, and usually recrystallized, either plesio-monolamellar or atelo-monolamellar. Aperture areal, terminal with a rounded to ovate outline.

Etymology

The species name ‘anatolica’ refers to the Anatolian Peninsula, which constitutes the Asian portion of Turkey where the type locality of the new species is located.

Microfossil association

Calvezina anatolica n. sp. is accompanied by a large number of foraminiferal species. The most commonly encountered species are Paynita permotaurica, Paradagmarita monodi, P. planispiralis, Paradagmacrusta callosa, Septoglobivalvulina guangxiensis, Louisettita elegantissima, Reichelina sp., Sphaerulina crassispira, Glomomidiellopsis uenoi, G. lysitiformis, Polarisella elabugae, Nodosinelloides sagitta, and Nestellorella dorashamensis (Pronina, Reference Pronina1989).

Dimensions

Diameter of proloculus: 50 μm (holotype: 50 μm). Height of test: 1660–2150 μm (holotype: 2090 μm). Width of test: 500–650 μm (holotype: 650 μm). Height/width: 3.19–3.21 (holotype: 3.21). Height of last chamber: 500–680 μm (holotype: 680 μm). Thickness of wall: 30–55 μm (holotype: 55 μm).

Remarks

Calvezina anatolica n. sp. differs from Calvezina ottomana Sellier de Civrieux and Dessauvagie, Reference Sellier de Civrieux and Dessauvagie1965, in having larger dimensions and having rectilinear and symmetrical last two chambers, as seen in the longitudinal frontal section of the holotype (Fig. 6.1). The large specimen illustrated as Calvezina sp. from the Lopingian of the Hazro area (Arabian Platform, SE Turkey) by Gaillot and Vachard (Reference Gaillot and Vachard2007, pl. 90, fig. 15) is probably Calvezina anatolica n. sp.

Type species

Eomarginulinella typica (Sosnina, Reference Sosnina1967) from southern Primorye (USSR).

Holotype

The specimen occurs in sample DT 11, thin section number 1 (Fig. 6.5), Aladağ Nappe, Taşkent DT section (Fig. 1).

Diagnosis

A species of Eomarginulinella with a slender test and uniformly growing five to seven chambers. The initial one or two chambers incipiently coiled or curvilinear, succeeding ones rectilinear.

Occurrence

Changhsingian, DT and TCX sections of the Aladağ Nappe and DD section of the Antalya Nappes, central Taurides, southern Turkey (Fig. 1).

Description

Slender test consists of a rather large and spherical proloculus and five to seven chambers gradually and regularly increasing in height. Initial one or two chambers are weakly coiled and curvilinear. Succeeding chambers are rectilinear, globular, or subglobular with depressed sutures. Slight morphological differences in some specimens are probably related to the orientation of longitudinal-frontal and longitudinal-lateral sections cutting through the slightly compressed subglobular chambers with different height/width ratios. The wall is atelo-monolamellar, calcareous, hyaline, and pseudofibrous with a thin, dark inner lining, probably made up of microgranular calcite. Aperture is a simple, areal, terminal opening accompanied by a slight thickening of the wall.

Etymology

Eomarginulinella galinae n. sp. is dedicated to Prof. Galina P. Nestell from the University of Texas at Arlington, USA, for her great contributions to the taxonomy and biostratigraphy of Permian foraminifera.

Microfossil association

The most common species found in association with Eomarginulinella galinae n. sp. in the Changhsingian are Paradagmarita monodi, P. planispiralis, Paynita permotaurica, Septoglobivalvulina distensa, Paraglobivalvulinoides gracilis, Labiodagmarita vasleti Gaillot and Vachard, Reference Gaillot and Vachard2007, Sphaerulina crassispira, Nankinella cf. N. quasihunanensis Sheng, Reference Sheng1963, Neodiscus milliolides, Midiella zaninettiae (Altıner, Reference Altıner1978), Multidiscus padangensis Lange, Reference Lange1925, Rectostipulina pentamerata, Protonodosaria exploita Trifonova, Reference Trifonova1978, Nodosinelloides sagitta, Ichthyofrondina palmata, Tauridia pamphyliensis Sellier de Civrieux and Dessauvagie, Reference Sellier de Civrieux and Dessauvagie1965, Eomarginulinella typica, and Robuloides lens.

Dimensions

Diameter of proloculus: 75–100 μm (holotype: 100 μm). Height of test: 400–810 μm (holotype: 650 μm). Width of test: 160–310 μm (holotype: 270 μm). Height/width: 2.24–2.61 (holotype: 2.40). Height of last chamber: 85–250 μm (holotype: 200 μm). Thickness of wall: 15–25 μm (holotype: 25 μm).

Remarks

Eomarginulinella? sp. illustrated from the Midian stage of the USSR by Kotlyar et al. (Reference Kotlyar, Zakharov, Kropachova, Pronina, Chediya and Burago1989, pl. 1, fig. 4) is close to E. galinae n. sp., but our form differs from the former in having a more slender longitudinal section. One of the specimens attributed to Calvezina ottomana by Groves et al. (Reference Groves, Altıner and Rettori2005, fig. 23.30) is identical to E. galinae n. sp. in having slightly arcuate one or two chambers followed by uniserial chambers. Similarly, E. galinae n. sp. differs from the holotype of Eomarginulinella serbica of Nestell et al. (Reference Nestell, Sudar, Jovanovic and Kolar-Jurkovšek2009) from the Changhsingian of northwestern Serbia in having a different growth rate of chambers in the uniserial stage and a slender test.

In our Changhsingian samples, E. galinae n. sp. is sometimes associated with Eomarginulinella typica (Sosnina, Reference Sosnina1967), type species of the genus Eomarginulinella described as Marginulinella typica Sosnina, Reference Sosnina1969. The new species differs from E. typica illustrated in Figure 6.11 and 6.12 in having symmetrical and regularly growing chambers in the uniserial stage and a slender test. Eomarginulinella sp. (Fig. 6.13) is a specimen morphologically close to E. galinae n. sp. but differs by the sudden increase of the chamber height immediately following the initial arcuate stage.

Type species

Pseudocryptomorphina amplimuralis new species.

Diagnosis

A genus questionably assigned to Robuloididae, consisting of strongly overlapping chambers with abruptly changing axis of growth and abnormally thickened wall in the last stage of ontogeny.

Occurrence

Changhsingian of the Aladağ Nappe and Antalya Nappes of the Taurides (southern Turkey).

Etymology

We have used the prefix pseudo- to define the present genus as a fake or false form of the genus Cryptomorphina of Sellier de Civrieux and Dessauvagie (Reference Sellier de Civrieux and Dessauvagie1965), a Permian genus characterized by a thick wall and described for the first time from the Antalya Nappes, Turkey.

Remarks

Pseudocryptomorphina n. gen. differs from Cryptomorphina in having strongly overlapping chambers with an abruptly changing axis of growth and unusually thickened wall whose thickness is more than the maximum width of the chambers as seen in the holotype. A well-oriented longitudinal frontal section of Cryptomorphina has been illustrated by Groves et al. (Reference Groves, Altıner and Rettori2005, fig. 22.17), in which it is clear that the coiling is present in the initial arcuate stage of Cryptomorphina followed by uniserial rectilinear chambers. We think that Vachard (Reference Vachard2018) was right to place this genus in the family Robuloididae, rather than in the uniserial groups of Permian foraminifera.

Holotype

The specimen comes from sample TCX 8, thin section number 2 (Aladağ Nappe, Taşkent, TCX section) (Fig. 6.15).

Diagnosis

A species of Pseudocryptomorphina n. gen., consisting of a large proloculus and strongly overlapping three chambers with axis of growth changing abruptly close to 90°. Wall unusually thick, made up of several laminae, successively added in the last stage of ontogeny.

Occurrence

Changhsingian, TCX and ST sections of the Aladağ Nappe and DD section of the Antalya Nappes, Taurides, South Turkey (Fig. 1).

Description

Test is composed of a rather large proloculus and three strongly overlapping chambers with an axis of growth shifting 90° as each chamber is added to the test structure. The height of the initial two chambers is more than their width. The third chamber becomes wider and partially overlaps the previous two chambers. The wall consists of a thin, microgranular inner layer and an outer hyaline fibrous layer. The fibrous layer tends to become thicker and partially occludes the cavities of chambers. The outer wall is unusually thick, even thicker than the maximum width of the space occupied by the cavities of chambers. It consists of several laminae successively added around the chambers. Aperture is unknown in the early two chambers, probably terminal, a rounded opening crossing the thickened laminar wall of the test.

Etymology

We have used the trivial name amplimuralis to indicate the thick-walled character of our new population.

Microfossil association

The most commonly encountered species of foraminifera associated with Pseudocryptomorphina amplimuralis n. gen. n. sp. are Paradagmarita monodi, P. flabelliformis Zaninetti, Altıner, and Çatal, Reference Zaninetti, Altıner and Çatal1981, Septoglobivalvulina distensa, S. guangxiensis, Glomomidiellopsis eunoi, Hemigordius guvenci Altıner, Reference Altıner1978, Rectostipulina quadrata, Polarisella elabugae, Frondina permica, and Ichthyofrondina palmata.

Dimensions

Diameter of proloculus: 70–75 μm (holotype: 75 μm). Height of test: 510–600 μm (holotype: 510 μm). Width of test: 500–520 μm (holotype: 520 μm). Height/width: 0.98–1.24 (holotype: 0.98). Height of last chamber: 65–75 μm (holotype: 75 μm). Thickness of wall: 150–350 μm (holotype: 350 μm).

Remarks

Pseudocryptomorphina amplimuralis n. gen. n. sp. differs from Cryptomorphina limonitica Sellier de Civrieux and Dessauvagie, Reference Sellier de Civrieux and Dessauvagie1965, in having a different chamber arrangement and a thicker wall. The specimens identified as C. limonitica by Groves et al. (Reference Groves, Rettori, Payne, Boyce and Altıner2007, fig. 6.6, 6.8) from the Changhsingian of the Southern Alps are close to P. amplimuralis n. gen. n. sp. in having a similar chamber arrangement. However, P. amplimuralis n. gen. n. sp. differs from these specimens in possessing a thicker wall in the final stage of ontogeny.

Remarks

From the family Pachyphloiidae, comprising the genera Pachyphloia Lange, Reference Lange1925, Robustopachyphloia Lin, Reference Lin1980, Aulocophloia Gaillot and Vachard, Reference Gaillot and Vachard2007, and Sosninella Sellier de Civrieux and Dessauvagie, Reference Sellier de Civrieux and Dessauvagie1965, we describe two new taxa from the Changhsingian of the Tauride Belt. Robustopachyphloia farinacciae n. sp. is characterized by a slender and compressed test and the “new pachyphloiidid genus?” with long and regularly spaced canal-like pores in the test crossing the successive laminae.

Type species

Robustopachyphloia annectena Lin, Reference Lin1980, from the Changhsing Limestone, Guangdong and Hubei provinces, China.

Holotype

The specimen is from sample TRLR 194, Antalya Nappes, Demirtaş TRLR section (Fig. 1) (Fig. 6.20).

Diagnosis

A species of Robustopachyphloia with a slender and compressed test comprising a small proloculus and up to 17 uniformly growing chambers. Chambers high and narrow, and septa arched throughout the test.

Occurrence

Changhsingian, TRLR and DD sections of the Antalya Nappes and TCX and DT sections of the Aladağ Nappe, central Taurides, southern Turkey (Fig. 1).

Description

Highly compressed, elongate, uniserial, and rectilinear test consisting of a small proloculus followed by 10 to 17 chambers progressively increasing in height. In the longitudinal-lateral section of the holotype, the initial four to five chambers appear to be beaded, forming a chain-like growth. Following high and narrow chambers with arched septa in the Pachyphloia stage increase more gradually in height. The last two or three chambers, devoid of lamellar thickening, are added to the test with depressed sutures. The wall is calcareous, radially fibrous, with a very thin, dark microgranular calcite inner layer. The aperture is terminal, rounded, and typically bordered by radial grooves in the Pachyphloia stage.

Etymology

Robustopachyphloia farinacciae n. sp. is dedicated to the late Professor Anna Farinacci from the Sapienza University of Rome, Italy, for her contributions to the geology and paleontology of Turkey.

Microfossil association

Robustopachyphloia farinacciae n. sp. is found in association with several foraminiferal species. The most commonly encountered ones are Paradagmarita monodi, P. flabelliformis, Paynita permotaurica, Louisettita elegantissima, Septoglobivalvulina distensa, Rectostipulina pentamerata, Nodosinelloides sagitta, Polarisella elabugae, Robuloides lens, Ichthyofrondina palmata, and I. latilimbata.

Dimensions

Diameter of proloculus: 20–35 μm (holotype: 20 μm). Height of test: 420–550 μm (holotype: 520 μm). Width of test: 90–125 μm (holotype: 105 μm). Height/width: 4.40–4.95 (holotype: 4.95). Height of last chamber: 50–100 μm (holotype: 60 μm). Thickness of wall: 15–20 μm (holotype: 15 μm).

Remarks

Robustopachyphloia sp., illustrated by Gaillot and Vachard (Reference Gaillot and Vachard2007, pl. 87, fig. 21) from the Lopingian of the Kuh-e Surmeh section of Iran, is similar to Robustopachyphloia farinacciae n. sp. in having high and narrow chambers with arched septa. However, it differs from R. farinacciae n. sp. by the lesser number of chambers. Robustopachyphloia farinacciae n. sp. differs also from R. annectena Lin, Reference Lin1980, from the Changhsing Limestone of China and R. texana Nestell and Nestell in Nestell et al., Reference Nestell, Nestell, Wardlaw and Sweatt2006, from Capitanian deposits of the Guadalupe Mountains, West Texas (USA), in having high and narrow chambers with arched septa instead of having crescentiform chambers with flattened septa.

Remarks

According to Groves et al. (Reference Groves, Rettori and Altıner2004) (see also the description of Sellier de Civrieux and Dessauvagie, Reference Sellier de Civrieux and Dessauvagie1965), the wall in Pachyphloia Lange, Reference Lange1925, is thickened by secondary lamellae, suggesting plesio- or ortho-monolamellar construction. The hyaline and radially organized fibrous structure visible in this thickened lamellar wall is the most characteristic feature of the genus Pachyphloia that can be easily recognized in longitudinal lateral sections. In the Changhsingian of the Southern Biofacies Belt, several Pachyphloia-like specimens recovered from the Antalya Nappes (Olimpus: OLP-3 159; Demirtaş: DD 3, 11, 14, 19) and the Aladağ Nappe (Taşkent: TCX 4, 11, 14, 21, 22; DT 4, 5, 8, 13; Hadim: AR-1 662, 669; AR-2 153; Aygörmez Dağı: ST 671; K 4034) (Fig. 1) exhibit long and regularly spaced canal-like pores crossing the successive laminae (Fig. 6.28). Although several sections display the character that we define here, in order to give a correct taxonomic description, we need longitudinal-frontal sections and sections perpendicular to the radially organized pores crossing the lamellar system of these peculiar forms.

Evolution of robuloidid genera

When phyletic relations of previously known robuloidid genera (Vachard, Reference Vachard2018) are analyzed along with the new genera added in this study, three distinct groups emerge, which are probably related to one another by intermediate taxa that have not yet been identified and resolved (Fig. 9). Among these groups, the entirely coiled group appeared with Robuloides in the Capitanian, probably derived from an unknown ancestor that established the evolutionary link between Robuloides and Eocristellaria Miklukho-Maklay, Reference Miklukho-Maklay1954. Robuloides gave way to Hubeirobuloides Lin, Li, and Zhang in Lin et al., Reference Lin, Li and Sun1990, characterized by a test that uncoils following the fully coiled stage and a taxon called Robuloides? in this study, becoming evolute in the late stage of its ontogeny. The lineage terminated finally by the derivation of Pseudorobuloides n. gen. from Robuloides? with an involute to semi-involute to evolute discoidal test and completely reduced lateral lamellar thickenings. Plectorobuloides n. gen., which exhibits twisted coiling in the early stage of its ontogeny, and Gourisina Reichel, Reference Reichel1946, characterized by two serial chambers, could be added to this lineage in the Changhsingian; however, there must be some intermediate taxa that have yet to be discovered that would illustrate the sequence of morphological change between these two forms and the possible ancestor Robuloides (Fig. 9).

Figure 9.

Tentative evolutionary scheme of Robuloididae including the new genera introduced in this study.

The second group of taxa of the family Robuloididae, represented by Eocristellaria (Fig. 9), appeared in the Wordian. With loosely coiled chambers increasing rapidly in breadth, Eocristellaria gave way to Calvezina Sellier de Civrieux and Dessauvagie, Reference Sellier de Civrieux and Dessauvagie1965, in the Capitanian, characterized by loosely coiled chambers in the initial stage of the test followed by rectilinear-elongate chambers in the adult stage. Finally, Cryptomorphina Sellier de Civrieux and Dessauvagie, Reference Sellier de Civrieux and Dessauvagie1965, was derived from Calvezina with the development of a thick wall in the late Capitanian. All taxa in this group and those included in the Robuloides lineage survived into the Changhsingian stage and disappeared very close to the Permian–Triassic boundary. Pseudocryptomorphina n. gen., doubtfully included in Robuloididae and characterized by a different chamber arrangement and a very thick wall, could be related to Cryptomorphina; however, we are not confident of this interpretation in the absence of an intermediate taxon (or taxa) illustrating the morphological transition.

The third group in the evolution of robuloidid foraminifera is represented by Eomarginulinella Sosnina, Reference Sosnina1969, and characterized by incipiently coiled chambers in the early stage, and rectilinear and globular chambers in the adult. Eomarginulinella is first known from the early Guadalupian and survived into the Changhsingian. It is distinguished from the second group by possessing circular transverse sections of its chambers instead of having oval shapes. The ancestors of both Eomarginulinella and Eocristellaria are not yet known in the Permian. Identification of an intermediate taxon would help to clarify the evolutionary relationship between Eomarginulinella and Eocristellaria.

Two different lineages (the Robuloides acutus–Robuloides? rettorii n. sp.–Pseudorobuloides reicheli n. gen. n. sp. lineage, and the Robuloides lens–Robuloides lata n. sp. lineage) and Plectorobuloides taurica n. gen. n. sp. in robuloidid foraminifera.—Morphologic variation and the frequent occurrence of smaller Robuloides species in the middle and upper Permian carbonate deposits of the Southern Biofacies Belt in Turkey reveal that these smaller species evolved in certain lineages with a pronounced proliferation in the latest Permian (Changhsingian). As was indicated by Vachard (Reference Vachard2018), the earliest Robuloides appeared in the middle Permian (Capitanian) and two smaller Robuloides species, R. lens and R. acutus, split into two lineages and survived from the Capitanian to the end of the Changhsingian.

Robuloides? rettorii n. sp. appeared, with coiling becoming evolute in the last whorl, in the Wuchiapingian from the laterally compressed and involute tests of R. acutus, and continued to survive into the Changhsingian (Fig. 10). A major morphological modification in this lineage occurred close to the Wuchiapingian–Changhsingian boundary. Similar to the evolution of Millerella from the eostaffellid stock in the Carboniferous (Maslo and Vachard, Reference Maslo and Vachard1997), Pseudorobuloides reicheli n. gen. n. sp., with an involute to semi-involute to evolute discoidal test and completely reduced lateral lamellar thickenings, probably evolved from R.? rettorii n. sp. and survived up to the Permian–Triassic boundary.

Figure 10.

Tentative scheme depicting the evolution of smaller robuloidid genera and species in two different lineages originated from Robuloides lens and R. acutus.

The other lineage, represented mainly by R. lens with involute and lenticular to inflated-lenticular tests, remained morphologically unchanged up to the Wuchiapingian–Changhsingian boundary (Fig. 10). Robuloides lata n. sp., with lozenge-shaped axial sections and thus a smaller diameter/width ratio, evolved from R. lens in the Changhsingian. In the evolution of robuloidid foraminifera, the most distinct trend is the appearance of Plectorobuloides taurica n. gen. n. sp. in the Changhsingian. Characterized by changes in the coiling axis of the initial whorls, the ancestor of this taxon is not properly known. Robuloides lens may have been the ancestor, however, intermediate steps should be found filling the morphologic gap between R. lens and Plectorobuloides taurica n. gen. n. sp.

Evolution of other robuloidid species (Eomarginulinella galinae n. sp., Calvezina anatolica n. sp., and Pseudocryptomorphina amplimuralis n. gen. n. sp.).—With current data, it is not possible to propose clear evolutionary hypotheses for these species. Eomarginulinella, comprising E. galinae n. sp. and some other species, such as E. typica and E. serbica, may be polyphyletic. For example, E. galinae n. sp. and E. serbica may have evolved from a Pseudolangella ancestor, whereas the type species, E. typica, may be directly related to the evolution of robuloidid foraminifera.

Calvezina anatolica n. sp., characterized by a large test and with a tendency to become rectilinear at the end its ontogeny, is closely related to C. ottomana and probably evolved from this latter species in the Changhsingian.

Among the new taxa described in this study, the most difficult taxon to assess phylogenetically is Pseudocryptomorphina amplimuralis n. gen. n. sp. Although this taxon superficially resembles Cryptomorphina limonitica in having a thick wall and few chambers, the chamber organization is different and it is difficult to relate it, at the moment, to a known evolutionary lineage.

Robustopachyphloia farinacciae n. sp. and the new pachyphloiid genus? within the evolutionary frame of pachyphloiid genera.—The genus Pachyphloia, which probably is derived from the Syzrania Reitlinger, Reference Reitlinger1950–Nodosinelloides Mamet and Pinard, Reference Mamet and Pinard1992–Geinitzina Spandel, Reference Spandel1901, lineage, survived the entire Permian (Fig. 11). Although Vachard (Reference Vachard2018) reported the first occurrence of Pachyphloia in the Kungurian, based on studies of Groves (Reference Groves1997) and Groves and Wahlman (Reference Groves and Wahlman1997), this genus most likely originated earlier in the Permian. Pachyphloia led to the evolution of some distinct taxa during the middle and late Permian. Aulacopholia, considered to be confined to the Changhsingian (Vachard, Reference Vachard2018), was derived from Pachyphloia in the late Wordian and survived up to the Permian–Triassic boundary, based on data from the eastern Taurides, Turkey (Altıner and Şahin, Reference Altıner and Şahin2012). The genus Sosninella also was derived from Pachyphloia and currently is known only from the Capitanian. Sosninella, characterized by sigmoidal transverse sections and not very well known from the literature, makes its last appearance during the mid-Capitanian extinction event when schwagerinids became extinct in the eastern Taurides, Turkey (Altıner and Şahin, Reference Altıner and Şahin2012) (Fig. 11). From the other pachyphloiids, the genus Robustopachyphloia appeared in the late Capitanian and seems to have survived until the end of the Permian. Similar to some of the robuloidid species (e.g., Eomarginulinella) Robustopachyphloia species are probably polyphyletic. Robustopachyphloia is a clear descendent from the genus Pachypholia, but the species of Robustopachyphloia (e.g., R. farinacciae n. sp., R. annectena) may have descended from different species of Pachyphloia. This problem raises questions about the taxonomic validity of the genus Robustopachyphloia, if it houses species that evolved from different ancestors.

Figure 11.

Tentative evolutionary scheme of Pachyphloiidae including the “new pachyphloiid genus?”.

The taxon that we report in this study as “new pachyphloiid genus?”, which is characterized by the appearance of canal-like perforations in the wall, surely is a descendent from the genus Pachyphloia, more precisely the type species P. ovata.