Hostname: page-component-77f85d65b8-pkds5 Total loading time: 0 Render date: 2026-04-15T02:04:18.307Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesizing AlN powder by mechanochemical reaction between aluminum and melamine

Published online by Cambridge University Press:  31 January 2011

Wenlong Zhang ,
Zhiqiang Li  and
Di Zhang
Di Zhang
Affiliation:
State Key Laboratory of MMCs, Shanghai Jiao Tong University, Shanghai 200240, People's Republic of China
Get access

Abstract

A solid state mechanochemical reaction (MCR) method for synthesizing AlN powder with aluminum and melamine powders as the reactants was proposed and put into practice. It was found that the solid state MCR between aluminum and melamine is an instantaneous and exothermic reaction. For a certain charge ratio, a critical ball milling time is needed for the MCR to occur. The higher the charge ratio, the faster the MCR. Cryogenic environments help to accelerate the MCR between Al and melamine. In addition to the direct one-step MCR synthesis approach mentioned above, AlN powder can also be synthesized by pre-ball-milling Al and melamine powders followed by heat treatment. Using this two-step approach, the heat treatment temperature is only about 638 °C, which is much lower than that used in other ways for synthesizing AlN powder. The lower heat treatment temperature can be attributed to the combined effect of both the adoption of melamine and the high reactivity of powders caused by ball milling. Comparatively, the present solid state MCR method for synthesizing AlN powder may be more cost-effective and hence more promising to be used to industrially produce both AlN powder and in situ AlNP reinforced aluminum matrix composites.

Keywords

Reactive ball millingNitridePowder processing

Information

Type
Articles
Information
Journal of Materials Research , Volume 25 , Issue 3 , March 2010 , pp. 464 - 470
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1.Mussler, B.H., Venigalla, S., Johnson, W.C.Advanced materials and powders. Am. Ceram. Soc. Bull. 79, (6)45 (2000)Google Scholar
2.Abdoli, H., Salahi, E., Farnoush, H., Pourazrang, K.Evolutions during synthesis of Al–AlN-nanostructured composite powder by mechanical alloying. J. Alloys Compd. 461, 166 (2008)CrossRefGoogle Scholar
3.Sakurai, T., Yamada, O., Miyamoto, Y.Combustion synthesis of fine AlN powder and its reaction control. Mater. Sci. Eng., A 415, 40 (2006)CrossRefGoogle Scholar
4.Juang, R-C., Chen, C-C.Combustion synthesis of hexagonal aluminum nitride crystal by aluminum carbides. Mater. Sci. Eng., A 458, 210 (2007)CrossRefGoogle Scholar
5.Fu, R., Chen, K., Agathopoulos, S., Ferreira, J.M.F.Factors which affect the morphology of AlN particles made by self-propagating high-temperature synthesis (SHS). J. Cryst. Growth 296, 97 (2006)CrossRefGoogle Scholar
6.Ye, H.Z., Liu, X.Y., Luan, B.In situ synthesis of AlN in Mg–Al alloys by liquid nitridation. J. Mater. Process. Technol. 166, 79 (2005)CrossRefGoogle Scholar
7.Thapa, R., Saha, B., Chattopadhyay, K.K.Synthesis of cubic aluminum nitride by VLS technique using gold chloride as a catalyst and its optical and field-emission properties. J. Alloys Compd. 475, 373 (2009)CrossRefGoogle Scholar
8.Qin, M., Du, X., Li, Z., Humail, I.S., Qu, X.Synthesis of aluminum nitride powder by carbothermal reduction of a combustion synthesis precursor. Mater. Res. Bull. 43, 2954 (2008)CrossRefGoogle Scholar
9.Qin, M., Du, X., Wang, J., Humail, I.S., Qu, X.Influence of carbon on the synthesis of AlN powder from combustion synthesis precursors. J. Eur. Ceram. Soc. 29, 795 (2009)CrossRefGoogle Scholar
10.Xi, S., Liu, X., Li, P., Zhou, J.AlN ceramics synthesized by carbothermal reduction of mechanical activated Al2O3. J. Alloys Compd. 457, 452 (2008)CrossRefGoogle Scholar
11.Zhuge, L.J., Yao, W.G., Wu, X.M.Mechanochemical nitridation by ball milling iron with m-phenylene. J. Magn. Magn. Mater. 257, 95 (2003)CrossRefGoogle Scholar
12.Wang, G.M., Campbell, S.J., Kaczmarek, W.A.Mechanochemical nitridation by ball milling iron with pyrazole: A structural investigation. Mater. Sci. Eng., A 226–228, 80 (1997)CrossRefGoogle Scholar
13.Hashimoto, N., Sawada, Y., Bando, T., Yoden, H.Preparation of aluminum nitride powder from aluminum polynuclear complexes. J. Am. Ceram. Soc. 74, (6)1282 (1991)CrossRefGoogle Scholar
14.Ponthieu, E., Rao, L., Gengembre, L., Grimblot, J., Kaner, R.Solid-state synthesis of aluminum nitride through a metathetical route. Solid State Ionics 63–65, 116 (1993)CrossRefGoogle Scholar
15.Lee, W.C., Tu, C.L., Weng, C.Y., Chunga, S.L.A novel process for combustion synthesis of AlN powder. J. Mater. Res. 10, (3)774 (1995)CrossRefGoogle Scholar
16.Kim, J.Y., Kumta, P.N.A novel reductive nitrogenation approach for synthesizing aluminum nitride powders. Mater. Lett. 34, 188 (1998)CrossRefGoogle Scholar
17.Akiyama, T., Hirai, Y., Ishikawa, N.Combustion synthesis of aluminum nitride from dross. Mater. Trans. 42, (3)460 (2001)CrossRefGoogle Scholar
18.Shin, J., Ahn, D.H., Shin, M.S., Kim, Y.S.Self-propagating high-temperature synthesis of aluminum nitride under lower nitrogen pressures. J. Am. Ceram. Soc. 83, (5)1021 (2000)CrossRefGoogle Scholar
19.Juang, R.C., Lee, C.J., Chen, C.C.Combustion synthesis of hexagonal aluminum nitride powders under low nitrogen pressure. Mater. Sci. Eng., A 357, 219 (2003)CrossRefGoogle Scholar
20.Shim, G., Park, J.S., Cho, S.W.Combustion synthesis of AlN with melamine as an additive. J. Mater. Res. 21, (3)747 (2006)CrossRefGoogle Scholar
21.Zhao, H., Lei, M., Chen, X., Tang, W.Facile route to metal nitrides through melamine and metal oxides. J. Mater. Chem. 16, 4407 (2006)CrossRefGoogle Scholar
22.Levchik, S.V., Weil, E.D.Flame retardancy of thermoplastic polyesters—A review of the recent literature. Polym. Int. 54, 11 (2005)CrossRefGoogle Scholar
23.Berger, U., Schnick, W.Syntheses, crystal structures, and vibrational spectroscopic properties of MgCN2, SrCN2, and BaCN2. J. Alloys Compd. 206, 179 (1994)CrossRefGoogle Scholar
24.Ulicky, L., Kemp, T.J.Comprehensive Dictionary of Physical Chemistry (Ellis Horwood, New York 1992)468Google Scholar
25.Ren, R.M., Yang, Z.G., Shaw, L.L.Synthesis of nanostructured TiC via carbothermic reduction enhanced by mechanical activation. Scr. Mater. 38, (5)735 (1998)CrossRefGoogle Scholar
26.Ren, R.M., Yang, Z.G., Shaw, L.L.Synthesis of nanostructured chromium nitrides through mechanical activation process. Nanostruct. Mater. 11, (1)25 (1999)CrossRefGoogle Scholar
27.Ren, R.M., Yang, Z.G., Shaw, L.L.Nanostructured TiN powder prepared via an integrated mechanical and thermal activation. Mater. Sci. Eng., A 286, 65 (2000)CrossRefGoogle Scholar
28.Suryanarayana, C.Mechanical alloying and milling. Prog. Mater. Sci. 46, (1–2)1 (2001)CrossRefGoogle Scholar
29.Schaffer, G.B., Mccormick, P.G.Displacement reactions during mechanical alloying. Metall. Trans. A 21, 2789 (1990)CrossRefGoogle Scholar
30.Schaffer, G.B., Mccormick, P.G.Anomalous combustion effects during mechanical alloying. Metall. Trans. A 22, 3019 (1991)CrossRefGoogle Scholar