Hostname: page-component-77f85d65b8-g4pgd Total loading time: 0 Render date: 2026-04-17T22:18:03.691Z Has data issue: false hasContentIssue false

Miniaturized branch-line coupler based on slow-wave microstrip lines

Published online by Cambridge University Press:  22 August 2018

H. Alhalabi
Affiliation:
Beirut Arab University, Debbieh, Lebanon
H. Issa*
Affiliation:
Beirut Arab University, Debbieh, Lebanon
E. Pistono
Affiliation:
Univ. Grenoble Alpes, Grenoble INP, CNRS, RFIC-lab, F-38000 Grenoble, France
D. Kaddour
Affiliation:
Univ. Grenoble Alpes, Grenoble INP, CNRS, LCIS-lab, 26000 Valence, France
F. Podevin
Affiliation:
Univ. Grenoble Alpes, Grenoble INP, CNRS, RFIC-lab, F-38000 Grenoble, France
A. Baheti
Affiliation:
Alten GmbH
S. Abouchahine
Affiliation:
Beirut Arab University, Debbieh, Lebanon
P. Ferrari
Affiliation:
Univ. Grenoble Alpes, Grenoble INP, CNRS, RFIC-lab, F-38000 Grenoble, France
*
Author for correspondence: H. Issa, E-mail: h.issa@bau.edu.lb

Abstract

This paper presents a miniaturized 3-dB branch-line coupler based on slow-wave microstrip transmission lines. The miniaturized coupler operating at 2.45 GHz is designed and implemented on a double-layer printed circuit board substrate with blind metallic vias embedded in the lower substrate layer providing the slow-wave effect. Based on this concept, a 43% size miniaturization is achieved as compared with a classical microstrip branch-line coupler prototype. The measured S parameters present a return loss of 25.5 dB and an average insertion loss equal to 0.05 dB at the operating frequency.

Information

Type
Research Papers
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable