Introduction
Dry edible bean is the legume most directly consumed by people worldwide and is a major source of protein for human nutrition (Schmutz et al. Reference Schmutz, McClean, Mamidi, Wu, Cannon, Grimwood, Jenkins, Shu, Song, Chavarro, Torres-Torres, Geffroy, Moghaddam, Gao, Abernathy, Barry, Blair, Brick, Chovatia, Gepts, Goodstein, Gonzales, Hellsten, Hyten, Jia, Kelly, Kudrna, Lee, Richard, Miklas, Osorno, Rodrigues, Thareau, Urrea, Wang, Yu, Zhang, Wing, Cregan, Rokhsar and Jackson2014; Urrea et al. Reference Urrea, Yonts, Lyon and Koehler2009). The United States produces more than 1.3 million tons of dry edible beans annually (Lucier and Davis Reference Lucier and Davis2020; Soltani et al. Reference Soltani, Dille, Gulden, Sprague, Zollinger, Morishita, Lawrence, Sbatella, Kniss, Jha and Sikkema2018a). Dry edible bean is a specialty crop in Nebraska and one of the major cash crops in western Nebraska and the High Plains region (Beiermann et al. Reference Beiermann, Miranda, Creech, Knezevic, Jhala, Harveson and Lawrence2021c; Urrea et al. Reference Urrea, Yonts, Lyon and Koehler2009). Nebraska ranks fourth in dry edible bean production in the United States, representing an annual value of more than $94 million, wherein more than 70% of the dry edible bean production occurs in the Nebraska panhandle region (Lucier and Davis Reference Lucier and Davis2020; Soltani et al. Reference Soltani, Dille, Gulden, Sprague, Zollinger, Morishita, Lawrence, Sbatella, Kniss, Jha and Sikkema2018a; Thomas et al. Reference Thomas, Hein and Kamble2001). Weed competition with dry edible bean can result in a significant yield loss because dry edible bean is a weak competitor with weeds, primarily because of its slow growth rate and short stature (Adjesiwor et al. Reference Adjesiwor, Claypool and Kniss2020; Beiermann et al. Reference Beiermann, Creech, Knezevic, Jhala, Harveson and Lawrence2021a). The potential yield loss in dry edible beans in the United States and Canada, if weeds are left unmanaged, is estimated be 71.4%, compared to 50% and 52.1% in corn (Zea mays L.) and soybean (Glycine max L. Merr.), respectively (Soltani et al. Reference Soltani, Dille, Burke, Everman, VanGessel, Davis and Sikkema2016, Reference Soltani, Dille, Burke, Everman, VanGessel, Davis and Sikkema2017, Reference Soltani, Dille, Gulden, Sprague, Zollinger, Morishita, Lawrence, Sbatella, Kniss, Jha and Sikkema2018a). The 71.4% yield loss estimated by Soltani et al. (Reference Soltani, Dille, Gulden, Sprague, Zollinger, Morishita, Lawrence, Sbatella, Kniss, Jha and Sikkema2018a) would represent a financial loss to the dry edible bean industry of more than $622 and $100 million annually in the United States and Canada, respectively.
The most common weed species in dry edible bean production in the United States include barnyardgrass [Echinochloa crus-galli (L.) P. Beauv.], common cocklebur (Xanthium strumarium L.), common lambsquarters (Chenopodium album L.), common ragweed (Ambrosia artemisiifolia L.), common sunflower (Helianthus annuus L.), foxtails (Setaria spp.), nightshades (Solanum spp.), redroot pigweed (Amaranthus retroflexus L.), velvetleaf (Abutilon theophrasti Medik.), and waterhemp [Amaranthus tuberculatus (Moq.) J. D. Sauer] (Burnside et al. Reference Burnside, Wiens, Holder, Weisbere, Ristau, Johnson and Cameron1998; Soltani et al. Reference Soltani, Shropshire and Sikkema2014; Wilson Reference Wilson2005; Wilson et al. Reference Wilson, Wicks and Fenster1980). Similar weed species are commonly reported in dry edible bean production areas in Nebraska; however, Palmer amaranth is a recent arrival to western Nebraska (Lawrence Reference Lawrence2017; Sarangi and Jhala Reference Sarangi and Jhala2018a) and is not reported in most other states and counties that produce dry edible beans (CABI 2020). However, Palmer amaranth is spreading outside of its native range in North America; the U.S. Department of Agriculture estimated that 81% of land in the United States is suitable for Palmer amaranth establishment, and there is a high probability that Palmer amaranth could cause significant damage to agricultural fields, resulting in negative economic, environmental, and societal impacts (USDA-APHIS 2020).
Palmer amaranth is a dioecious, broadleaf, summer annual, and extremely competitive species in the Amaranthaceae family that infests agricultural fields in the United States (Ward et al. Reference Ward, Webster and Steckel2013). Palmer amaranth has a fluctuating emergence pattern that is affected by light, moisture, and temperature; it can germinate rapidly, completely germinating in 1 d under ideal conditions (Jha et al. Reference Jha, Norsworthy, Riley and Bridges2010; Jha and Norsworthy Reference Jha and Norsworthy2009; Spaunhorst Reference Spaunhorst2016; Steckel et al. Reference Steckel, Sprague, Stoller and Wax2004); and has a unique long emergence period that varies geographically based on the length of the local growing season. In the southeastern United States, Palmer amaranth emerges from May to September, and in the Midwest it emerges from May to August (McDonald et al. Reference McDonald, Striegel, Chahal, Jha, Rees, Proctor and Jhala2021). Palmer amaranth has evolved resistance to many herbicide modes of action (Heap Reference Heap2021). In Nebraska, there is confirmed resistance to acetolactate synthase (ALS), hydroxyphenylpyruvate dioxygenase, triazine, photosystem II (PS II), and glyphosate (5-enolpyruvylshikimate-3-phosphate synthase) herbicides (Chahal et al. Reference Chahal, Varanasi, Jugulam and Jhala2017). Because of herbicide resistance, extended emergence pattern, high fecundity, and fast growth rate, Palmer amaranth has become one of the most troublesome weeds in row crops in the United States (Chahal et al. Reference Chahal, Aulakh, Jugulam, Jhala, Price, Kelton and Sarunaite2015; Chandi et al. Reference Chandi, Jordan, York, Milla-Lewis, Burton, Culpepper and Whitaker2012; Korres et al. Reference Korres, Norsworthy and Mauromoustakos2019). Palmer amaranth interference reduced corn, soybean, and peanut (Arachis hypogaea L.) yield by 91% at 8 plants m−1 row crop (Massinga et al. Reference Massinga, Currie, Horak and Boyer2001), 68% at 10 plants m−1 row crop (Klingaman and Oliver Reference Klingaman and Oliver1994), and 67% at 5.2 plants m−1 row crop (Burke et al. Reference Burke, Schroeder, Thomas and Wilcut2007), respectively. Its interference in dry edible bean reduced yield by 77% at 2 plants m−1 row crop and a 5% yield reduction has been estimated to occur at only 4 plants 100 m−2 (Miranda et al. Reference Miranda, Jhala, Bradshaw and Lawrence2022).
ALS inhibitor-resistant biotypes of Palmer amaranth are widespread and found mainly in western Nebraska where crops are irrigated (Beiermann et al. Reference Beiermann, Creech, Knezevic, Jhala, Harveson and Lawrence2021b; Lawrence Reference Lawrence2017). There are effective preplant-incorporated (PPI) and preemergence (PRE) herbicides in dry edible bean for ALS inhibitor-resistant pigweed (Amaranthus spp.) species control in Nebraska (Knezevic et al. Reference Knezevic, Klein, Ogg, Creech, Kruger, Lawrence, Jhala, Proctor, Jackson-Ziems, Harveson, Wegulo, Bartles, Timmerman, Sivits, Broderick, Wright, Ohnesorg and McMechan2020); however, PRE and PPI herbicides provide weed control only for the early season (Beiermann et al. Reference Beiermann, Creech, Knezevic, Jhala, Harveson and Lawrence2021a; Steckel et al. Reference Steckel, Sprague and Hager2002). In contrast, postemergence (POST) herbicide options are limited, and ALS inhibitor-resistant pigweed species control is challenging (Beiermann et al. Reference Beiermann, Miranda, Creech, Knezevic, Jhala, Harveson and Lawrence2021c). Halosulfuron, imazamox, and imazethapyr are commonly used herbicides; however, they are not effective for controlling Palmer amaranth once ALS inhibitor-resistant biotypes become present in the field. Bentazon, a PS II-inhibitor herbicide applied POST is ineffective against pigweed species (Beiermann et al. Reference Beiermann, Creech, Knezevic, Jhala, Harveson and Lawrence2021a; Chahal et al. Reference Chahal, Varanasi, Jugulam and Jhala2017). Currently, the only effective POST herbicide for ALS inhibitor-resistant pigweed species control in dry edible bean is fomesafen (Wilson Reference Wilson2005); however, with the recent label update of fomesafen, corn planting is prohibited in western Nebraska for 18 mo after application (Anonymous 2021). Corn is the most widely used rotational crop following dry edible beans in western Nebraska; therefore, fomesafen is no longer an option for control of ALS inhibitor-resistant Palmer amaranth for most dry edible bean growers in the region.
A need exists for effective herbicide programs in dry edible bean to control ALS-inhibitor-resistant Palmer amaranth in western Nebraska. One effective option to manage weeds with extended periods of emergence and resistance to multiple herbicides, such as Palmer amaranth, is to use sequential herbicide applications, PRE followed by (fb) POST, of soil-residual herbicides to create overlapping control of emerging seedlings and achieve season-long control (Chahal et al. Reference Chahal, Ganie and Jhala2018; Goodrich et al. Reference Goodrich, Butts-Wilmsmeyer, Bollero and Riechers2018; Jhala et al. Reference Jhala, Malik and Willis2015; McCloskey Reference McCloskey2001; Steckel et al. Reference Steckel, Sprague and Hager2002). It is essential that POST application of soil-residual herbicides occur while PRE applied soil-residual herbicides are still active in the soil to prevent weed escapes between application timings. Dimethenamid-P, a very-long-chain fatty acid (VLCFA) synthesis inhibitor (classified as a Group 15 herbicide by the Weed Science Society of America) herbicide labeled for POST use in dry edible bean, has the potential to effectively control Palmer amaranth in dry edible bean (Anonymous 2019; Knezevic et al. Reference Knezevic, Klein, Ogg, Creech, Kruger, Lawrence, Jhala, Proctor, Jackson-Ziems, Harveson, Wegulo, Bartles, Timmerman, Sivits, Broderick, Wright, Ohnesorg and McMechan2020; Sarangi and Jhala Reference Sarangi and Jhala2019; Soltani et al. Reference Soltani, Shropshire and Sikkema2018b; Wilson and Sbatella Reference Wilson and Sbatella2014). In fact, Kohrt and Sprague (Reference Kohrt and Sprague2017b), Mueller and Steckel (Reference Mueller and Steckel2011), and Steckel et al. (Reference Steckel, Sprague and Hager2002) concluded that the use of VLCFA synthesis inhibitor herbicides is critically important for the management of herbicide-resistant Palmer amaranth and waterhemp since their residual activity may provide control throughout the season.
Dimethenamid-P is a soil-residual herbicide within the chloroacetamide chemical family that provides excellent dry edible bean crop safety and effectively controls a wide range of annual grass weeds, nutsedges, and small-seeded broadleaf weeds such as common lambsquarters and pigweed species that include triazine- and ALS inhibitor-resistant biotypes in several crops (Sarangi and Jhala Reference Sarangi and Jhala2019; Soltani et al. Reference Soltani, Robinson, Shropshire and Sikkema2006, Reference Soltani, Shropshire and Sikkema2014). Limited research has been conducted with sequential PRE fb POST application programs of soil-residual herbicides in dry edible bean. The objective of this study was to evaluate dimethenamid-P efficacy applied sequentially PRE fb POST at two POST application timings, first trifoliate (V1) and third trifoliate (V3) growth stages, for control of ALS-inhibitor-resistant Palmer amaranth in dry edible bean.
Materials and Methods
Site Description
A field study was initiated in 2019 at the University of Nebraska-Lincoln Panhandle Research and Extension Center in Scottsbluff, Nebraska (41.893°N, 103.680°W) with additional treatments in the field experiments conducted in 2020 and 2021. However, due to multiple significant hail events occurring in mid-August 2019, causing total crop loss, only ALS inhibitor-resistant Palmer amaranth control and density data were presented from 2019. Soil type was a Tripp fine sandy loam (coarse silty, mixed, superactive, mesic Aridic Haplustolls; NCSS 2006; USDA-NRCS 2019) with a pH range from 7.8 to 8.3 and organic matter of 1.5% to 1.7%. The experiment area had natural populations of common lambsquarters, hairy nightshade (Solanum physalifolium Rusby), green foxtail [Setaria viridis (L.) P. Beauv.], and Palmer amaranth. Around 60% of Palmer amaranth population present at the experiment area is resistant to ALS-inhibiting herbicides; however, the proportion of resistant Palmer amaranth is spatially highly variable. The preceding crop in the experiment area had been sugar beet (Beta vulgaris L.) for several years.
Treatments and Experimental Design
This study was designed as a randomized complete block design with four replications. The dry edible bean cultivar ‘La Paz’ (ADM Seedwest, Decatur, IL) was planted on June 7, 2019, the cultivar ‘SV6139GR’ (Seminis, St. Louis, MO) was planted on May 26, 2020, and the cultivar ‘Cowboy’ (ADM Seedwest) was planted on June 1, 2021. All dry edible bean cultivars are pinto with type II (upright indeterminate) growth habits. Dry edible beans were planted at a density of 210,000 seeds ha−1 using a row spacing of 0.56 m, a standard row spacing for dry edible bean in the western United States. The plots consisted of four rows, 9.1 m in length. Nitrogen was applied at 112 kg ha−1 and P2O5 was applied at 45 kg ha−1 with a dry fertilizer applicator prior to experiment establishment. Glyphosate was applied at a rate of 1,261 g ae ha−1 + ammonium sulfate (AMS; WinField United, Arden Hills, MN) at 3% vol/vol + nonionic surfactant (NIS; WinField United) at 0.25% vol/vol within 1 d after dry edible bean planting to control emerged weeds. Irrigation was provided season-long using an overhead lateral-move irrigation system.
In the initial field experiment conducted in 2019, all treatments received a PRE application of pendimethalin + dimethenamid-P. Treatments consisted of PRE alone, PRE fb dimethenamid-P at V1, PRE fb dimethenamid-P at V3, PRE fb imazamox + bentazon + fomesafen at V1, and PRE fb imazamox + bentazon + fomesafen at V3. In the field experiments in 2020 and 2021, all treatments containing an herbicide received a PRE application of pendimethalin + dimethenamid-P. Treatments consisted of PRE alone, PRE fb imazamox + bentazon at V1, PRE fb imazamox + bentazon at V3, PRE fb dimethenamid-P at V1, PRE fb dimethenamid-P at V3, PRE fb imazamox + bentazon + dimethenamid-P at V1, PRE fb imazamox + bentazon + dimethenamid-P at V3, PRE fb imazamox + bentazon + fomesafen at V1, and PRE fb imazamox + bentazon + fomesafen at V3. Herbicide rates used for the PRE and POST application timings are shown in Table 1. A nontreated control was included in 2020 and 2021 for a comparison with other PRE fb POST herbicide programs and was considered as a weedy treatment.
Information on herbicides evaluated in dry edible bean for ALS-inhibitor-resistant Palmer amaranth control in field experiments conducted in 2019, 2020 and 2021. a
a Abbreviations: ALS, acetolactate synthase; POST, postemergence; PRE, preemergence.
b Herbicides applied POST included 18 g ammonium sulfate L−1 and 1.5% vol/vol methylated seed oil.
Herbicides applied PRE were incorporated into the soil with 12.5 mm of irrigation within 24 h after application (Table 2). Herbicides applied POST with residual activity into the soil were incorporated within 24 h after their application with 6.25 mm of irrigation (Table 2). AMS at 18 g L−1 and methylated seed oil (MSO; WinField United) at 1.5% vol/vol were used with all POST applications that included imazamox, bentazon, or fomesafen. Herbicides were applied with a CO2-pressurized backpack sprayer equipped with four TeeJet 11002 AIXR nozzles (Spraying Systems Co., Wheaton, IL) spaced at 0.51 m, calibrated to deliver 140 L ha–1 of spray solution at a pressure of 160 kPa and at a constant speed of 4.8 km h−1.
Dates of PRE and POST application timings of herbicides evaluated in dry edible bean for ALS-inhibitor-resistant Palmer amaranth control in field experiments conducted in 2019, 2020 and 2021. a
a Abbreviations: ALS, acetolactate synthase; POST, postemergence; PRE, preemergence.
b Herbicides applied PRE were incorporated into the soil with 12.5 mm of irrigation.
c Herbicides applied POST were incorporated into the soil with 6.25 mm of irrigation.
Data Collection
Palmer amaranth visual control (%) was assessed every 2 wk after V3 treatment (WAV3) until harvest on a scale of 0% to 100%, where 0% represents no control and 100% represents complete control. Palmer amaranth density was recorded every two WAV3 until harvest by randomly placing two 0.5 m2 quadrants in each plot. At harvest, density was assessed, and aboveground Palmer amaranth biomass was also recorded from the same quadrats. Palmer amaranth aboveground biomass was oven-dried at 60 C for 1 wk before weighed. To simplify the presentation of results, Palmer amaranth control and density at 4WAV3 were presented for 2019, 2020, and 2021 for appropriate comparison between treatments. Additionally, for 2020 and 2021, Palmer amaranth density and control at harvest were presented. Assessments of control, density, and biomass at harvest occurred on September 2, 2020, and September 1, 2021. Dry edible bean was harvested September 17, 2020, and September 10, 2021, by hand pulling all plants from 6.1 m of row from the center rows. Hand-pulled dry edible bean plants were later threshed with a Zurn 150 plot combine (ZURN USA Inc., Brooklyn Park, MN) serving as a stationary thresher. Weight and moisture per plot were recorded by an H2 Classic GrainGage (Juniper Systems & HarvestMaster Inc., Logan, UT) installed on the combine. Yields were adjusted to a 15% standard moisture. Dry edible bean yield was not assessed in 2019 because hail events produced total crop failure.
Statistical Analysis
Data were analyzed using R software version 4.0.2 (R Core Team 2020). Visual estimated Palmer amaranth control, Palmer amaranth dry biomass, and yield data were analyzed using a linear mixed model (LMM) with the lmer function in the lme4 package version 1.1-23 (Bates et al. Reference Bates, Mächler, Bolker and Walker2015) along with ANOVA at the 5% level of significance. Palmer amaranth control (%) data for the nontreated control were excluded from the analysis because the values were 0% (Sarangi and Jhala Reference Sarangi and Jhala2018b). Improvement in normality and homogeneity for Palmer amaranth control residuals was gained through arcsine square root transformation, whereas for Palmer amaranth, dry biomass was gained through square root transformation; therefore, data were analyzed with arcsine square root or square root transformation. However, back-transformed mean values and their standard errors are presented for better interpretation (Onofri et al. Reference Onofri, Carbonell, Piepho, Mortimer and Cousens2010). Palmer amaranth density was analyzed using a generalized linear mixed-effect model (GLMM) with Poisson error distribution using the glmer function in the lme4 package version 1.1-23 (Bates et al. Reference Bates, Mächler, Bolker and Walker2015) along with ANOVA at the 5% level of significance. The ANOVA was performed using the Anova function in the car package version 3.010 (Fox and Weisberg Reference Fox and Weisberg2019). For LMM models, Type III Wald F-tests were conducted in the ANOVA, while Type III Wald chi-square tests were conducted in the ANOVA for GLMM models. Data from the 2019 growing season were analyzed separately from 2020 and 2021 growing seasons because treatments were not similar, where herbicide treatment was considered as fixed effect and replications were considered as random effects. For 2020 and 2021 growing seasons, herbicide treatment, year, and treatment by year interaction were considered fixed effects, and replications within years were considered as random effects. Treatment by year interaction was tested for each response variable to evaluate variability across years. ANOVA assumptions of normality and homogeneity of variance were tested by plotting residuals for the models assuming normal distributions (Kniss and Streibig Reference Kniss and Streibig2018; Onofri et al. Reference Onofri, Carbonell, Piepho, Mortimer and Cousens2010). Whenever a significant herbicide treatment and/or a treatment by year effect was found, means were separated using estimated marginal means (a.k.a. least squares means) using the emmeans function in the ‘emmeans’ package version 1.5.1 (Lenth Reference Lenth2020), and the 5% Fisher’s protected LSD test was calculated using the cld function in the multcomp package version 1.4-14 (Hothorn et al. Reference Hothorn, Bretz and Westfall2008).
Results and Discussion
Year by treatment interactions for Palmer amaranth control at 4 WAV3 and at harvest in 2020 and 2021 were not significant at α = 0.05; therefore, data at 4 WAV3 and at harvest from both years were combined and results were presented as an average control over 2 yr by assessment date. Year by treatment interactions for Palmer amaranth density at 4 WAV3 and at harvest were significant at α = 0.05; there were greater densities in 2020 than in 2021. Therefore, data at 4 WAV3 and at harvest from both years were analyzed separately. Given that Palmer amaranth densities were different between 2020 and 2021 and to simplify results, Palmer amaranth biomass at harvest and dry edible bean yield were also analyzed separately because they may have been influenced by Palmer amaranth densities; therefore, results were presented for each year for these response variables.
Weather
Average temperatures in 2019 were lower than the 30-yr average; specifically, the average temperature in May was 24% lower compared with the 30-yr average (Table 3). In July and August 2019, temperatures were similar to the 30-yr average. Overall, in 2020 and 2021, average temperatures were greater than the 30-yr average by 5% and 6%, respectively (Table 3). In 2019, recorded rainfall was around 23% greater than the 30-yr average. In 2020 and 2021, rainfall was not as high as in 2019, both years were very dry compared with the 30-yr average, around 46% and 33% less rainfall, respectively (Table 3). Normal planting dates for dry edible bean in the region occur between mid-May to the first days in June to assure that the crop senesces before the first frost (Beiermann et al. Reference Beiermann, Creech, Knezevic, Jhala, Harveson and Lawrence2021a). Because of frequent rainfall events, dry edible bean planting in 2019 was delayed until June 7th, which is late in the season compared with normal planting dates in the region. Planting in 2020 and 2021 occurred between the window of normal planting dates in the region. As irrigation was supplied during the three growing seasons, rainfall had minimal influence on study results, with the exception of delaying planting in 2019.
Average monthly temperature and total rainfall during 2019, 2020, and 2021 growing seasons compared to the 30-yr average at the University of Nebraska Panhandle Research and Extension Center, Scottsbluff, NE. a
a Temperature and rainfall data were obtained from the High Plains Regional Climate Center weather station (ID: Scottsbluff 2NW) located within 1 km of the field experiment site (https://hprcc.unl.edu/).
Palmer Amaranth Control
Dimethenamid-P + pendimethalin applied PRE alone provided 0% Palmer amaranth control at 4 WAV3 in 2019; while in 2020 and 2021, the PRE-alone application provided 96% control of Palmer amaranth (Table 4). Dimethenamid-P applied POST at V1 following the PRE application of dimethenamid-P + pendimethalin provided 95% control of Palmer amaranth; however, when dimethenamid-P was applied POST at V3, control was 70% at 4 WAV3 in 2019. Even though in 2019 the POST application of dimethenamid-P only provided effective (> 90%) control of Palmer amaranth when applied at V1, in 2020 and 2021, both POST application timings, V1 and V3, provided >98% Palmer amaranth control at 4 WAV3, similar to the fomesafen-containing treatments (Table 4). In 2020 and 2021, imazamox + bentazon applied POST at V1 provided the lowest Palmer amaranth control at 4 WAV3. However, when dimethenamid-P was mixed with imazamox + bentazon in the POST application, the control of Palmer amaranth increased to >97%.
ALS-inhibitor-resistant Palmer amaranth control and density at 4 WAV3 for 2019, 2020, and 2021 growing seasons. a
a Abbreviations: ALS, acetolactate synthase; fb, followed by; NA, not applicable as the treatment was not included in 2019; PRE, pendimethalin + dimethenamid-P applied preemergence; SE, standard error of the mean; V1, first trifoliate growth stage; V3, third trifoliate growth stage; 4 WAV3, 4 wk after V3 stage.
b Means (± SE) with no common letter(s) within the same column are significantly different at the LSD 5% level.
Dimethenamid-P applied POST at V1 and V3, following PRE application of dimethenamid-P + pendimethalin, provided >94% control of Palmer amaranth at harvest in 2020 and 2021, which was similar to the control provided by the fomesafen-containing treatments (Table 5). Palmer amaranth control provided by the PRE-alone application of dimethenamid-P + pendimethalin declined from 96% at 4 WAV3 to 86% at harvest. The PRE-alone application of dimethenamid-P + pendimethalin along with imazamox + bentazon applied POST at V1 (91%) provided the lowest Palmer amaranth control at harvest. Imazamox + bentazon applied POST at V3 (99%) provided similar control as the fomesafen-containing treatments. As not all the Palmer amaranth populations present in the study area were resistant to ALS-inhibiting herbicides, imazamox + bentazon applied POST provided >91% Palmer amaranth control. Additionally, the Palmer amaranth control provided by imazamox + bentazon at V1 increased to 97% with dimethenamid-P in the mix.
ALS-inhibitor-resistant Palmer amaranth control, density, and biomass at harvest for 2020 and 2021 growing seasons. a
a Abbreviations: ALS, acetolactate synthase; fb, followed by; PRE, pendimethalin + dimethenamid-P applied preemergence; SE, standard error of the mean; V1, first trifoliate growth stage; V3, third trifoliate growth stage.
b Means (± SE) with no common letter(s) within the same column are significantly different at the LSD 5% level.
Equivalent results of a PRE-alone program as in 2020 and 2021 were reported by Kohrt and Sprague (Reference Kohrt and Sprague2017a), when 83% to 98% control of glyphosate, atrazine, and ALS-inhibitor-resistant Palmer amaranth was achieved when S-metolachlor + atrazine, and S-metolachlor + mesotrione were used in a PRE-alone program in corn. On the other hand, inconsistent control provided by PRE-alone programs as observed in 2019 were previously reported in the literature. Liu et al. (Reference Liu, Kumar, Jhala, Jha and Stahlman2021b) and Chahal et al. (Reference Chahal, Ganie and Jhala2018) reported ineffective control (62% to 72% and 12% to 15%, respectively) of multiple herbicide–resistant Palmer amaranth in corn when PRE-alone treatments were used. Inconsistent Palmer amaranth control provided by PRE-alone programs was attributed to the degradation of the residual activity of soil-residual herbicides as the soybean season advanced (Sarangi and Jhala Reference Sarangi and Jhala2019; Shyam et al. Reference Shyam, Chahal, Jhala and Jugulam2021).
Comparable sequential PRE fb POST program results were reported by Steckel et al. (Reference Steckel, Sprague and Hager2002) and Jhala et al. (Reference Jhala, Malik and Willis2015). Steckel et al. (Reference Steckel, Sprague and Hager2002) reported that sequential PRE fb POST applications of S-metolachlor and acetochlor, when POST applications were mixed with dicamba to control emerged weeds, provided more than 83% and 89% control of waterhemp in corn, respectively. Similarly, Jhala et al. (Reference Jhala, Malik and Willis2015) reported >90% control of waterhemp when acetochlor was mixed with glyphosate in the PRE and POST applications, in a PRE fb early-POST (V2 to V3) and late-POST (V4 to V5) program in soybean. Comparable sequential PRE fb POST program results without foliar-active herbicides in the POST application timing were reported by Moomaw et al. (Reference Moomaw, Martin and Wilson1983) and Goodrich et al. (Reference Goodrich, Butts-Wilmsmeyer, Bollero and Riechers2018). Moomaw et al. (Reference Moomaw, Martin and Wilson1983) reported in corn that sequential PRE fb POST applications of metolachlor + cyanazine fb metolachor and alachlor + cyanazine fb alachlor effectively controlled redroot pigweed. Likewise, in sorghum (Sorghum bicolor L. Moench), pyroxasulfone applied POST 2 wk after its PRE application provided 94% to 96% waterhemp control (Goodrich et al. Reference Goodrich, Butts-Wilmsmeyer, Bollero and Riechers2018).
Palmer Amaranth Density and Biomass
Palmer amaranth control data were reflected in the density and biomass data. In 2019, the PRE-alone application of dimethenamid-P + pendimethalin along with dimethenamid-P applied POST at V3, resulted in the greatest Palmer amaranth density at 4 WAV3 with 13 and 16 plants m−2, respectively (Table 4). However, Palmer amaranth density at 4 WAV3 was similar to that of the fomesafen-containing treatments, when dimethenamid-P was applied POST at V1 (1 plant m−2). In 2020 and 2021, the nontreated control resulted in the greatest density at 4 WAV3. Within the herbicide treatments, imazamox + bentazon applied POST resulted in the greatest Palmer amaranth density at 4 WAV3 in both years, 2020 and 2021, with 9 plants m−2 when applied at V3 in 2020 and 8 plants m−2 when applied at V1 in 2021 (Table 4). The PRE-alone application of dimethenamid-P + pendimethalin resulted in the second greatest Palmer amaranth density at 4 WAV3 in both years 2020 and 2021 with 4 and 2.5 plants m−2, respectively. Dimethenamid-P applied POST at V1 and V3 resulted in similar Palmer amaranth densities at 4 WAV3 as the fomesafen-containing treatments in both years 2020 and 2021. Imazamox + bentazon + dimethenamid-P applied POST at both V1 and V3 resulted in similar Palmer amaranth density at 4 WAV3 as the fomesafen-containing treatment in 2021; however, in 2020, only the V1 application timing of imazamox + bentazon + dimethenamid-P resulted in similar Palmer amaranth density as the fomesafen-containing treatments.
The nontreated control demonstrated the greatest density and biomass accumulation of Palmer amaranth at harvest in 2020 and 2021; however, densities were greater in 2020 by 20%, and dry biomass was 56% greater (Table 5). Although there were more statistical differences in Palmer amaranth density between herbicide treatments at the 4 WAV3 assessment date in 2020, at harvest all herbicide treatments resulted in similar Palmer amaranth densities and biomass accumulation. There were higher Palmer amaranth densities (0.1 to 4 plants m−2) in the herbicide treatments at 4 WAV3 in 2020 than at harvest time (0 to 1.5 plants m−2). This likely occurred due to the crop canopy closure that controlled the small flushes of Palmer amaranth via shading as the season progressed, resulting in Palmer amaranth densities of fewer than 1.5 plants m−2 in all herbicide treatments. Palmer amaranth biomass was reduced to 111 and 92 g m−2 (i.e., 95% and 96% reduction relative to the nontreated control) when dimethenamid-P was applied alone POST at V1 and V3, respectively.
Similar to 2020, in 2021 all herbicide treatments resulted in reduced densities and dry biomass accumulation of Palmer amaranth at harvest (Table 5); however, there were more statistical differences among treatments. Within the treatments containing an herbicide, similar to the 4 WAV3 assessment date, imazamox + bentazon applied POST at V1 provided the greatest Palmer amaranth density (11 plants m−2), where density was reduced by 62% compared with the nontreated control. The best-performing treatments for reducing Palmer amaranth densities were imazamox + bentazon applied POST at V3, dimethenamid-P applied POST at V1 and V3, imazamox + bentazon + dimethenamid-P applied POST at V3, and imazamox + bentazon + fomesafen applied POST at V1, which reduced Palmer amaranth densities to 0.5, 0.7, 0.5, 0.5, and 1.2 plants m−2, respectively, compared with the nontreated control (29 plants m−2). Palmer amaranth biomass was more reduced when imazamox + bentazon (25 g m−2), imazamox + bentazon + dimethenamid-P (18 g m−2), and imazamox + bentazon + fomesafen (10 g m−2) were all applied POST at V3. Palmer amaranth biomass provided by dimethenamid-P applied POST at V1 or V3, respectively, was similar to the aforementioned treatments. Palmer amaranth biomass was reduced to 2 and 22 g m−2 when dimethenamid-P was applied POST at V1 and V3, respectively.
Consistent Palmer amaranth and pigweeds species biomass and density reductions provided by sequential PRE fb POST programs of VLCFA-inhibiting herbicides were previously reported in the literature. Moomaw et al. (Reference Moomaw, Martin and Wilson1983) reported in corn that sequential PRE fb POST applications of metolachlor + cyanazine fb metolachor and alachlor + cyanazine fb alachlor reduced redroot pigweed density to 0.9 and 0.7 plants m−2, respectively. Sarangi and Jhala (Reference Sarangi and Jhala2019) reported that PRE fb POST programs in soybean including VLCFA-inhibiting herbicides resulted in 96% to 100% Palmer amaranth biomass reduction compared with the nontreated control. Similarly, Jhala et al. (Reference Jhala, Malik and Willis2015) reported reductions of waterhemp density and biomass to ≤2 plants m−2 and ≤12 g m−2 when acetochlor was mixed with glyphosate in the PRE and POST applications, in a PRE fb early-POST (V2 to V3) and late-POST (V4 to V5) program in soybean.
Differences in the POST application timing of imazamox + bentazon + fomesafen and imazamox + bentazon suggest that imazamox, bentazon, or fomesafen provide poor residual control (Table 5). Dimethenamid-P applied POST at V3 resulted in high Palmer amaranth density at 4 WAV3 in 2019, but the application timing was too late to overlap residual control with the PRE herbicides. In 2020, we did not observe Palmer amaranth flushes after the PRE application; consequently, the PRE-alone treatment as well as the sequential PRE fb POST programs, resulted statistically in the same density and biomass accumulation. However, in 2021, we did have Palmer amaranth flushes after the PRE application; however, those Palmer amaranth flushes occurred after the V3 application timing. Consequently, in 2020 and 2021, dimethenamid-P applied POST at V1 and V3 performed equally as the fomesafen-containing treatments, providing similar reductions in Palmer amaranth density and biomass. Mixing dimethenamid-P with imazamox + bentazon POST also performed similarly to the fomesafen-containing treatments and dimethenamid-P alone POST.
The poor Palmer amaranth control from dimethenamid-P applied POST at V3 in 2019 may have been caused by multiple factors, but it was primarily due to the dissipation or degradation of the PRE soil-residual herbicides prior to Palmer amaranth emergence. Average temperatures were cooler between dry edible bean planting and the V3 application timing in 2019 (19.2 C) by 1.1 C and 3.3 C compared with 2020 and 2021, respectively. The cooler temperatures in 2019 might have contributed to the delay in the reach of dry edible bean growth stages, due to lower growing degree day accumulation, during that delay the PRE soil-residual activity could have dissipated. Additionally, Liu et al. (Reference Liu, Kumar, Jha and Stahlman2021a) reported that Palmer amaranth populations from western Nebraska had between two to four emergence flushes, which occurred from early May to early June, when the mean temperature was ≥21 C. In 2019, weather conditions may have been ideal for Palmer amaranth emergence within the V1 and V3 timeframe as average temperatures were >21 C. While in 2020 and 2021 average temperatures were >21 C earlier in the season, which may have caused earlier Palmer amaranth emergence in both years. The longevity of soil-residual herbicides may vary year to year along with the timing of Palmer amaranth emergence, depending on environmental conditions that are difficult to predict.
Dry Edible Bean Yield
The nontreated control had the lowest dry edible bean yield in both 2020 and 2021 (Table 6). All the treatments containing an herbicide in 2020 and 2021 resulted in greater dry edible bean yield compared with the nontreated control. In 2020, within the herbicide treatments, imazamox + bentazon applied POST at V3 provided the lowest dry edible bean yield (4,190 kg ha−1), whereas the greatest yield was provided by imazamox + bentazon + dimethenamid-P applied POST at V3 (5,260 kg ha−1), which was similar to the fomesafen-containing treatments and dimethenamid-P applied POST at V1 (4,370 kg ha−1) and V3 (4,870 kg ha−1). In 2021, within the treatments containing an herbicide, the PRE-alone application of dimethenamid-P + pendimethalin provided the lowest dry edible bean yield (4,330 kg ha−1). The greatest yield was provided by imazamox + bentazon applied POST at V3 (5,720 kg ha−1) and imazamox + bentazon + fomesafen applied POST at V1 (5,760 kg ha−1), which were similar to what was provided by dimethenamid-P and imazamox + bentazon + dimethenamid-P both applied POST at V1 and V3.
Dry edible bean yield for 2020 and 2021 growing seasons. a
a Abbreviations: fb, followed by; PRE, pendimethalin + dimethenamid-P applied preemergence; SE, standard error of the mean; V1, first trifoliate growth stage; V3, third trifoliate growth stage.
b Means (± SE) with no common letter(s) within the same column are significantly different at the LSD 5% level.
Dry edible bean yield was reduced by 98% and 81% in the nontreated controls compared to the top-yielding treatments in both years 2020 and 2021, respectively. Soltani et al. (Reference Soltani, Dille, Gulden, Sprague, Zollinger, Morishita, Lawrence, Sbatella, Kniss, Jha and Sikkema2018a) estimated that the potential yield loss in dry edible beans in Nebraska if weeds are left unmanaged would be 59%. However, Palmer amaranth was not widespread across Nebraska when Soltani et al. (Reference Soltani, Dille, Gulden, Sprague, Zollinger, Morishita, Lawrence, Sbatella, Kniss, Jha and Sikkema2018a) reported the aforementioned yield loss, and Palmer amaranth yield loss may be more severe than other weed species commonly found within dry edible bean. In 2020 and 2021, dry edible bean yield potential was protected by dimethenamid-P applied POST at V1 and V3 resulting in similar yields as the fomesafen-containing treatments (Table 6).
Even when there were few yield differences among treatments containing an herbicide (Table 6), differences in Palmer amaranth biomass can relate to seed production. Previous studies reported a strong positive correlation between Palmer amaranth biomass and seed production, suggesting that as biomass increases, so does seed production (Mahoney et al. Reference Mahoney, Jordan, Hare, Leon, Roma-Burgos, Vann, Jennings, Everman and Cahoon2021; Miranda et al. Reference Miranda, Jhala, Bradshaw and Lawrence2022; Schwartz et al. Reference Schwartz, Norsworthy, Young, Bradley, Kruger, Davis, Steckel and Walsh2016; Spaunhorst et al. Reference Spaunhorst, Devkota, Johnson, Smeda, Meyer and Norsworthy2018; Webster and Grey Reference Webster and Grey2015). Liu et al. (Reference Liu, Kumar, Jhala, Jha and Stahlman2021b) and Norsworthy et al. (Reference Norsworthy, Schrage, Barber and Lazaro2016) concluded that late-emerging Palmer amaranth plants have negligible effects on crop yields; however, if those plants are left uncontrolled, even if they are small, they can set seeds into the soil and carry to future issues. For instance, late-emerging Palmer amaranth plants reported in cotton (Gossypium hirsutum L.) fields in Texas were able to produce 1,390 seeds m−2 (Werner et al. Reference Werner, Sarangi, Nolte, Dotray and Bagavathiannan2020). Given the high seed production of late-emerging Palmer amaranth plants, it is highly important to control every single plant for managing soil seedbank and reduce their persistence in a long-term weed management perspective.
Conclusion and Practical Implications
ALS-inhibitor resistance is segregating within the Palmer amaranth population present in the experiment area; consequently, imazamox + bentazon efficacy varied year to year depending on the timing of POST herbicide applied with respect to density and biomass. Although imazamox + bentazon controlled Palmer amaranth, resistance is a concern as several Palmer amaranth biotypes are ALS inhibitor-resistant worldwide (Heap Reference Heap2021). Dimethenamid-P applied POST following a PRE application of dimethenamid-P + pendimethalin provided equivalent Palmer amaranth density and biomass reduction as when dimethenamid-P was mixed with imazamox + bentazon, or when fomesafen was applied, except in 2019 when the V3 application timing failed to provide adequate control, likely due to environmental conditions that influenced the degradation of the PRE soil-residual herbicides and the Palmer amaranth emergence. If the Palmer amaranth population were completely resistant to ALS-inhibiting herbicides, treatments containing dimethenamid-P applied POST would still have provided adequate control of Palmer amaranth while treatments of imazamox + bentazon applied alone would likely have provided poor control. If fomesafen is not an option due to the crop rotation interval restriction, dimethenamid-P applied sequentially PRE fb POST or POST after the application of an effective PRE program is the only remaining effective option for ALS inhibitor-resistant Palmer amaranth management in dry edible bean. Although dimethenamid-P applied alone in a sequential PRE fb POST program provided >90% Palmer amaranth control, it is suggested that this herbicide be applied in a mixture with other herbicides to mitigate herbicide resistance. The use of dimethenamid-P in a sequential PRE fb POST program, alone or in a mixture with foliar-active herbicides should be considered by dry edible bean growers who are managing ALS inhibitor-resistant Palmer amaranth.
Acknowledgments
We acknowledge the Nebraska Dry Bean Commission for providing funding for this study.
No conflicts of interest have been declared.
Open access
