Palmer amaranth is one of the most troublesome weeds for peanut production in the southeastern United States (Webster Reference Webster2013). This weed is of major concern to growers due to its aggressive growth habit and high seed production. Recently, the evolution of herbicide resistance has made Palmer amaranth even more difficult to manage (Berger et al. Reference Berger, Ferrell, Dittmar and Leon2015; Gaeddert et al. Reference Gaeddert, Peterson and Horak1997; Sellers et al. Reference Sellers, Smeda, Johnson, Kendig and Ellersieck2003; Wise et al. Reference Wise, Grey, Prostko, Vencill and Webster2009). A competitive species with high seed production, Palmer amaranth significantly affects peanut yields if not controlled early in the season. A single Palmer amaranth plant per meter of row has been shown to decrease peanut yields up to 28% (Burke et al. Reference Burke, Schroeder, Thomas and Wilcut2007).
For the past two decades, weed control in peanut has relied heavily on acetolactate synthase (ALS)-inhibiting herbicides. The ALS-inhibiting herbicides have been attractive to growers because they offer advantages such as low use rates and effective control of a wide range of weed species while posing minimal risk for peanut injury (Bailey et al. Reference Bailey, Wilcut, Jordan, Swann and Langston1999; Saari et al. Reference Saari, Cotterman and Thill1994; Webster et al. Reference Webster, Wilcut and Coble1997). However, these herbicides often possess extended residual activity, which increases the selection pressure for resistance (Saari et al. Reference Saari, Cotterman, Smith and Primiani1992). Consequently, 159 weed species are now resistant to ALS-inhibiting herbicides, more than are resistant to any other mode of action (Heap Reference Heap2016). Palmer amaranth resistance to ALS-inhibiting herbicides was first confirmed in Kansas in 1991, and later was discovered in Georgia and Florida in 2000 and 2008, respectively (Heap Reference Heap2016; Horak and Peterson Reference Horak and Peterson1995). Surveys in these two states have shown that ALS-resistant Palmer amaranth has spread aggressively across peanut-growing regions. In Georgia, ALS-resistant Palmer amaranth has been confirmed in 21 peanut-growing counties (Wise et al. Reference Wise, Grey, Prostko, Vencill and Webster2009), while 97% of the major agronomic counties in Florida and North Carolina also have confirmed resistance (Berger et al. Reference Berger, Ferrell, Dittmar and Leon2015; Poirier et al. Reference Poirier, York, Jordan, Chandi, Everman and Whitaker2014).
Weeds resistant to ALS-inhibiting herbicides present a unique challenge to peanut production because few other POST herbicide options are available. One effective option is paraquat, but crop injury is severe and applications can only be made to peanuts up to 28 d after ground cracking (Anonymous 2016; Norsworthy et al. 2008). For mid-season application, the only other effective herbicides are the PPO-inhibitors. Palmer amaranth is adequately controlled by PPO-inhibiting herbicides when plants are less than 10 cm tall, but control declines quickly as plants surpass 10 cm in height (Gaeddert et al Reference Gaeddert, Peterson and Horak1997; Grichar Reference Grichar2007, Reference Grichar2008; Grichar and Dotray Reference Grichar and Dotray2011; Mayo et al. Reference Mayo, Horak, Peterson and Boyer1995; Morichetti et al. Reference Morichetti, Ferrell, MacDonald, Sellers and Rowland2012). If applied when plants are taller than 10 cm, most PPO-inhibiting herbicides control Palmer amaranth for 1 to 2 wk after treatment, but plants do not completely die and regrowth occurs (Morichetti et al. Reference Morichetti, Ferrell, MacDonald, Sellers and Rowland2012). Sequential herbicide applications may be the solution to the problem of weed regrowth, because defoliating the plant a second time is likely to cause plant death or limit weed interference for an extended period of time. Sequential applications of lactofen have been shown to provide higher levels of control of common lambsquarters (Chenopodium album L.) than single applications (Jordan et al. Reference Jordan, Wilcut and Swann1993).
Regardless of the efficacy of PPO-inhibiting herbicides against Palmer amaranth, peanut injury is of concern, especially when applications are made late in the season (Boyer et al. Reference Boyer, Ferrell, MacDonald, Tillman and Rowland2011). Late POST application of acifluorfen plus bentazon and sequential applications of lactofen have caused reductions in peanut yield up to 49% and 45%, respectively (Jordan et al. Reference Jordan, Wilcut and Swann1993). Applications of acifluorfen plus bentazon and lactofen have also been shown to cause severe reductions in peanut yield because applications are delayed to 4 wk after cracking (Wilcut Reference Wilcut1991). Conversely, Grichar (Reference Grichar1997b) reported minor differences between the yields of peanuts treated with acifluorfen, bentazon, acifluorfen plus bentazon, and lactofen applied 7 to 41 d after planting. Another study investigated application timing of saflufenacil on peanut and found that despite foliar injury after applications (up to 34%), saflufenacil could safely be applied up to 45 d after emergence and without reducing yield (>95% of nontreated) (Morichetti et al. Reference Morichetti, Ferrell, MacDonald, Sellers and Rowland2012). Similarly, lactofen applied 15, 30, and 45 d after planting resulted in 29%, 22%, and 28% foliar injury 7 d after treatment, respectively, but yields were not reduced (Ferrell et al. Reference Ferrell, Leon, Sellers, Rowland and Brecke2013).
Though there are inconsistencies in the literature on PPO-inhibiting herbicide injury in peanut, higher levels of injury seem to occur when applications are later in the season. Also, much of the work that has been conducted using PPO-inhibiting herbicides in peanut has used single applications or sequential application spaced far apart (>2 wk) (Boyer et al Reference Boyer, Ferrell, MacDonald, Tillman and Rowland2011; Dotray et al. Reference Dotray, Grichar, Baughman, Prostko, Grey and Gilbert2012; Ferrell et al. Reference Ferrell, Leon, Sellers, Rowland and Brecke2013; Jordan et al. Reference Jordan, Wilcut and Swann1993). Therefore, the objective of this study was to evaluate the impact of sequential applications of PPO-inhibiting herbicides on the control of Palmer amaranth in peanut and the associated peanut injury and yield.
Materials and Method
Site and Materials
Field experiments were conducted in 2013 and 2014 at the University of Florida’s Plant Science Research and Education Unit near Citra, FL. Soil for both experiments was Arredondo fine sand (loamy, siliceous, semiactive, hyperthermic Grossarenic Paleudult) with <1% organic matter. Palmer amaranth control was investigated in a naturally infested fallow area with >100 Palmer amaranth seedlings m−2. In a separate experiment, herbicide treatments were applied to weed-free peanut to assess the impact of foliar injury on yield. All treatments were applied with a CO2-pressurized backpack sprayer calibrated to deliver 187 L ha−1. Crop oil concentrate (Agri-Dex, Helena Chemical Co., Memphis, TN) was added to all herbicide treatments (1% v/v). Treatments were arranged as a two-factor factorial of herbicide and sequential application timing. A second application of each herbicide was made 5 or 15 d after the initial application (DAIT). Herbicide treatments comprised acifluorfen (280 g ha−1) (Ultra Blazer, United Phosphorus Inc., King of Prussia, PA), acifluorfen (280 g ha−1) plus bentazon (560 g ha−1) (Storm, United Phosphorus Inc., King of Prussia, PA), acifluorfen (280 g ha−1) plus bentazon (560 g ha−1) plus 2,4-DB (280 g ha−1) (Butyrac 200, Albaugh Inc., Ankeny, IA), and lactofen (219 g ha−1) (Cobra, Valent U.S.A. Corporation, Walnut Creek, CA). Both experiments had randomized complete block designs with four replications.
Palmer Amaranth Control
A fallow field with a natural Palmer amaranth population was maintained to determine the efficacy of sequential PPO herbicide applications. Plots were 3.1 by 3.1 m, and applications were made to the middle 1.8 m of each plot. Initial treatment applications were made June 13, 2013 and June 4, 2014. Palmer amaranth height averaged 10 to 20 cm and was at the 6- to 12-leaf stage at the time of the initial application, and the herbicides were reapplied either 5 or 15 DAIT.
Peanut Response
Peanut ‘Georgia-06G’ (Branch Reference Branch2007) was planted April 30, 2013 and April 29, 2014 in rows spaced 0.8 m apart. Four 7.6 m long rows were established as experimental units and herbicide applications were made across the entire plot. POST treatments were initiated 6 wk after planting, at the R2 growth stage, on June 13, 2013 and June 11, 2014, followed by sequential herbicide applications either 5 or 15 d later (Boote Reference Boote1982). Yield was determined from the center two rows of each plot to prevent an interaction from a border effect. Preemergence herbicides and hand weeding were used to maintain weed-free conditions throughout the duration of the experiment. Maturity and harvest timing were determined by the hull scrape method (Williams and Drexler Reference Williams and Drexler1981). After digging, peanuts were allowed to field dry for approximately 3 d, and commercial harvesting equipment was used to determine yield (adjusted to 9% moisture).
Data Collection and Analysis
Foliar peanut injury and Palmer amaranth control were estimated visually at 7, 14, 21, and 28 DAIT using a scale of 0 to 100 (0 indicating no injury symptoms and 100 indicating plant death). Data analysis was conducted using the Agricolae package in R (version 0.98.1091, R Studio Inc., Boston, MA). Data were subjected to ANOVA to test significance of main effects and interactions. Where significant effects were detected, treatment means were compared using Fisher’s protected LSD test (α=0.05).
Results and Discussion
Palmer Amaranth
There were no interactions between year and main effects of herbicide or sequential application interval (p=0.55) in the Palmer amaranth control study. Therefore, data were pooled across years. However, an interaction was detected between the main effects of herbicide and sequential application interval for Palmer amaranth control 7, 14, 21, and 28 DAIT (p<0.05).
At the 7 and 14 DAIT evaluation dates, the 15 d sequential application had not yet been applied. Therefore, the 7 and 14 DAIT data for the 15 d interval treatments reflect the response to a single application (Table 1). At 7 DAIT, the 5 d interval provided greater control of Palmer amaranth than the single application (15 d) in all herbicides except lactofen. By 14 DAIT, herbicides applied at the 5 d interval provided better control of Palmer amaranth than a single application (15 d) for all herbicides tested. With the exception of lactofen at 7 DAIT, the 7 and 14 DAIT data showed that two applications of all herbicides controlled Palmer amaranth better than a single application.
Influence of the interaction between herbicide and sequential application interval on Palmer amaranth control. Palmer amaranth control was evaluated on a scale from 0%, representing no control, to 100%, representing complete control.
a Means within columns followed by the same letter are not different according to Fisher’s protected LSD at p=0.05.
b Days after initial herbicide application.
c DAIT, days after initial application.
At 7 DAIT, the single application of lactofen (15 d interval treatment) provided the same level of control as lactofen applied twice (5 d interval treatment). Also, the single application of lactofen (15 d interval treatment) controlled Palmer amaranth as effectively or better than all other herbicides tested, regardless of the number of applications, when evaluated at 7 DAIT. This indicates that Palmer amaranth may not be able to recover as quickly from lactofen as from the other herbicides tested. Also, the lactofen product label requires that sequential applications be made at least 14 DAIT, possibly because the level of control does not improve when applied at a shorter interval (Anonymous 2015). Although studies have shown lactofen to have higher activity on Palmer amaranth than acifluorfen, bentazon, or 2,4-DB, many of these studies did not investigate the recovery of Palmer amaranth over time (Grichar Reference Grichar1997a, Reference Grichar2008; Mayo et al. Reference Mayo, Horak, Peterson and Boyer1995). Gaeddert et al (Reference Gaeddert, Peterson and Horak1997) did record Palmer amaranth control over time and found that acifluorfen and lactofen provided the same level of control 7 d after treatment, but by 28 d after treatment lactofen provided 16% more control than acifluorfen.
At 21 DAIT, sequential application at a 15 d interval provided more control than sequential application at a 5 d interval for all herbicide programs tested except acifluorfen plus bentazon. Lactofen reapplied at a 15 d interval provided 100% control of Palmer amaranth by 21 DAIT, the highest rating seen in any treatment (Table 1). Palmer amaranth plants had recovered from initial applications by the 15 d application and had resprouted to approximately 7 cm total plant height. Lactofen has been shown to be more active on larger Palmer amaranth plants than acifluorfen (Mayo et al. Reference Mayo, Horak, Peterson and Boyer1995).
At 28 DAIT, there was no difference in control of Palmer amaranth between sequential application intervals of acifluorfen plus bentazon or acifluorfen plus bentazon plus 2,4-DB. The addition of 2,4-DB to acifluorfen plus bentazon resulted in approximately 30% more control of Palmer amaranth compared to acifluorfen plus bentazon alone (Table 1). Acifluorfen reapplied at a 15 d interval provided 22% more control of Palmer amaranth at 28 DAIT than acifluorfen reapplied at a 5 d interval. By 28 DAIT, lactofen reapplied 15 DAIT provided 94% control of Palmer amaranth, the only treatment that controlled Palmer amaranth >65% at the final evaluation time. High levels of Palmer amaranth control have also been observed in previous research with acifluorfen and lactofen (96% and 100% respectively) (Grichar Reference Grichar2008). Overall, lactofen reapplied at a 15 d interval was the most successful treatment in controlling Palmer amaranth over the 4-wk evaluation period, despite control dropping to 63% 14 DAIT. While many growers consider <85% weed control to be failure, lactofen reapplied at a 15 d interval was the only treatment that provided this level of control at 3 out of the 4 evaluation dates. Furthermore, it is important to keep in mind that this study was conducted under a crop-free scenario. It is likely that Palmer amaranth control will be better in the presence of a peanut canopy, which might decrease Palmer amaranth recovery from the herbicide programs evaluated.
The reason why lactofen was more effective when reapplied at a 15 d interval compared to a 5 d interval may be that the amount of available leaf area was larger 15 DAIT than it was 5 DAIT. At the 5 d interval, much of the leaf area that was left on the plant was necrotic, thus reducing absorption of the second herbicide application. Due to the contact activity of these herbicides, more green leaf area allows for more coverage, and thus more control (Berger et al. Reference Berger, Dobrow, Ferrell and Webster2014).
Peanut Response
There were no interactions between year and main effects of herbicide or sequential application interval in the peanut response study (p=0.31). Therefore, data were pooled across years. With the exception of acifluorfen reapplied at a 5 d interval and both lactofen treatments, peanut injury was <20% 7 DAIT (Table 2). Acifluorfen and acifluorfen plus bentazon plus 2,4-DB, reapplied at a 5 d interval, caused 10% and 7% more peanut injury at 7 DAIT, respectively, than the single application (15 d interval treatment). No difference in peanut injury between application intervals was observed at 7 DAIT for acifluorfen plus bentazon or lactofen treatments. Both lactofen treatments caused the highest peanut injury 7 DAIT, resulting in approximately 40% injury. By 14 DAIT, peanut had recovered from the initial application and the 5 d interval application in all treatments (injury <11%) except for lactofen at both application intervals, which maintained greater than 20% injury. Also, at 14 DAIT, no statistical difference was detected between the application intervals of any herbicide. This is particularly interesting because at 14 DAIT the 15 d interval treatments had not yet been applied, thus the data compare two applications made 5 d apart to a single application. While there were differences in Palmer amaranth control between application intervals at 14 DAIT, the 5 d interval reapplication controlled Palmer amaranth more effectively than the 15 d interval reapplication, without causing increased peanut injury. Although this may be an acceptable application interval for minimizing peanut injury, it will only afford maximized Palmer amaranth control for a short period compared to reapplying at a 15 d interval. At the time the 5 d applications were made, the leaves may have become necrotic, limiting peanut absorption of the 5 DAIT herbicide application.
Influence of the interaction between herbicide and sequential application interval on peanut foliar injury and yield, expressed as percent of nontreated control. Peanut foliar injury was evaluated on a scale from 0%, representing no injury, to 100%, representing plant death.
a Means within columns followed by the same letter are not different according to Fisher’s protected LSD at p=0.05.
b Days after initial herbicide application.
c DAIT, days after initial application.
d Yield of nontreated control was 5,575 kg ha−1
Injury caused by acifluorfen applied at a 15 d interval did not exceed 14% at any data collection time. Conversely, foliar peanut injury from acifluorfen reapplied at a 5 d interval resulted in 23% injury 7 DAIT (Table 2). Overall, peanut injury was the same or lower when acifluorfen was reapplied at a 15 d interval rather than at a 5 d interval, and provided higher Palmer amaranth control at 21 and 28 DAIT (Table 1).
At 21 DAIT, the 15 d interval application was more injurious to peanut than the 5 d interval application timing in all herbicides except acifluorfen plus bentazon plus 2,4-DB (Table 2). Peanut has been shown to be extremely tolerant to applications of 2,4-DB (Baughman et al. Reference Baughman, Grichar and Jordan2002; Faircloth and Prostko Reference Faircloth and Prostko2010; Ferrell et al. Reference Ferrell, Leon, Sellers, Rowland and Brecke2013). Surprisingly, 10% less injury was observed 21 DAIT from 2,4-DB plus acifluorfen plus bentazon reapplied at a 15 d interval compared to acifluorfen plus bentazon alone reapplied at a 15 d interval. Although at 21 DAIT applications of acifluorfen and acifluorfen plus bentazon caused greater injury when reapplied at a 15 d interval rather than at a 5 d interval, no peanut injury was present at 28 DAIT for any treatment except both lactofen applications. Lactofen reapplied at 5 and 15 d intervals caused 3% and 15% peanut injury, respectively.
Peanut injury 28 DAIT from lactofen reapplied at 5 and 15 d intervals resulted in the lowest yields (81% and 74% of nontreated control, respectively) (Table 2). Peanut yield did not differ significantly in any of the treatments that contained acifluorfen, ranging from 87% to 93% of the nontreated control. Similarly, a study comparing single applications of acifluorfen, acifluorfen plus bentazon, and lactofen applied POST to peanut showed no differences in yield between treatments (Grichar Reference Grichar1997b). However, in the present study, lactofen reapplied at 5 and 15 d intervals caused reductions in peanut yield of 19% and 26%, respectively (Table 2). Sequential applications of lactofen applied early POST and late POST have been shown to reduce peanut yields 45% (Jordan et al. Reference Jordan, Wilcut and Swann1993). Also, Wilcut (Reference Wilcut1991) observed much more severe reductions in yield from acifluorfen plus bentazon and lactofen when applied 4 wk after cracking (39% and 45%, respectively). Similar responses of peanut to sequential applications of lactofen applied 2 wk apart have been observed, with yield reductions ranging from 17% to 19% (Wilcut et al. Reference Wilcut, Swann and Hagwood1990). While lactofen reapplied at a 15 d interval caused the greatest reduction in peanut yield, it also provided the highest level of Palmer amaranth control 21 and 28 DAIT. Dotray et al. (Reference Dotray, Grichar, Baughman, Prostko, Grey and Gilbert2012) concluded, after studies involving sequential applications of lactofen in peanut, that although foliar injury might occur, yield reductions are uncommon if all applications are made before full seed fill. This assertion is also printed on the product label (Anonymous 2015). Boyer et al (Reference Boyer, Ferrell, MacDonald, Tillman and Rowland2011) found that lactofen caused 9% and 17% reductions in peanut yield when applied 8 or 10 wk after planting, respectively, despite observed foliar injury of up to 48%.
In summary, sequential applications of PPO herbicides can be an effective means for controlling Palmer amaranth. Peanut tolerance to these herbicides is sufficient to allow this practice. However, care must be taken if sequential applications of lactofen are to be made in a mid-season timeframe. Unfortunately, PPO-resistant Palmer amaranth has been discovered (Heap Reference Heap2016), and following these recommendations could increase selection pressure on Palmer amaranth to develop resistance to this herbicide class.
