1 Introduction to one-class classification (OCC)
The traditional multi-class classification paradigm aims to classify an unknown data object into one of several pre-defined categories (two in the simplest case of binary classification). A problem arises when the unknown data object does not belong to any of those categories. Let us assume that we have a training data set comprising of instances of fruits and vegetables. Any binary classifier can be applied to this problem, if an unknown test object (within the domain of fruits and vegetables, e.g. apple or potato) is given for classification. But if the test data object is from an entirely different domain (e.g. a cat from the category animals), the classifier will always classify the cat as either a fruit or a vegetable, which is a wrong result in both the cases. Sometimes the classification task is just not to allocate a test object into predefined categories but to decide if it belongs to a particular class or not. In the above example an apple belongs to class fruits and the cat does not.
In OCC (Tax, Reference Tax2001; Tax & Duin, Reference Tax and Duin2001b), one of the classes (which we will arbitrarily refer to as the positive or target class) is well characterized by instances in the training data, while the other class (negative or outlier) has either no instances or very few of them, or they do not form a statistically representative sample of the negative concept. To motivate the importance of OCC, let us consider some scenarios. A situation may occur, for instance, where we want to monitor faults in a machine. A classifier should detect when the machine is showing abnormal/faulty behavior. Measurements on the normal operation of the machine (positive class training data) are easy to obtain. On the other hand, most possible faults would not have occurred in reality, hence we may have little or no training data for the negative class. Also, we may not want to wait until such faults occur as they may involve high cost, machine malfunction or risk to human operators. Another example is the automatic diagnosis of a disease. It is relatively easy to compile positive data (all patients who are known to have a ‘common’ disease) but negative data may be difficult to obtain since other patients in the database cannot be assumed to be negative cases if they have never been tested, and such tests can be expensive. Alternatively, if the disease is ‘rare’ it is difficult to collect positive samples until a sufficiently large group has contracted that disease, which is an unsatisfactory approach. As another example, a traditional binary classifier for text or web pages requires arduous pre-processing to collect negative training examples. For example, in order to construct a homepage classifier (Yu et al., Reference Yu, Han and Chang2002), sample of homepages (positive training examples) and a sample of non-homepages (negative training examples) need to be gleaned. In this situation, collection of negative training examples is challenging because it may either result in improper sampling of positive and negative classes or it may introduce subjective biases.
The outline of the rest of this paper paper is as follows. Section 2 compares OCC with multi-class classification and discusses the performance measures employed for OCC algorithms. Section 3 provides an overview of related reviews of OCC. In Section 4, we propose a taxonomy for the study of OCC algorithms and present a comprehensive review of the current state of the art and significant research contributions under the branches of the proposed taxonomy. Section 5 concludes our presentation with a discussion on some open research problems and our vision for the future of research in OCC.
2 One-class classification vs. multi-class classification
In a conventional multi-class classification problem, data from two (or more) classes are available and the decision boundary is supported by the presence of data objects from each class. Most conventional classifiers assume more or less equally balanced data classes and do not work well when any class is severely under-sampled or is completely absent. It appears that Minter (Reference Minter1975) was the first to use the term ‘single-class classification’ four decades ago, in the context of learning Bayes classifier that requires only labeled data from the ‘class of interest’. Much later, Moya et al. (Reference Moya, Koch and Hostetler1993) originate the term One-Class Classification in their research work. Different researchers have used other terms such as Outlier Detection Footnote 1 (Ritter & Gallegos, Reference Ritter and Gallegos1997), Novelty Detection Footnote 2 (Bishop, Reference Bishop1994), Concept Learning (Japkowicz, Reference Japkowicz1999) or Single Class Classification (Munroe & Madden, Reference Munroe and Madden2005; Yu, Reference Yu2005; El-Yaniv & Nisenson, 2007). These terms originate as a result of different applications to which OCC has been applied. Juszczak (Reference Juszczak2006) defines One-Class Classifiers as class descriptors that are able to learn restricted domains in a multi-dimensional pattern space using primarily just a positive set of examples.
As observed by Tax (Reference Tax2001), the problems that are encountered in the conventional classification problems, such as the estimation of the classification error, measuring the complexity of a solution, the curse of dimensionality, the generalization of the classification method also appear in OCC and sometimes become even more prominent. As stated earlier, in OCC tasks either the negative data objects are absent or available in limited amount, so only one side of the classification boundary can be determined using only positive data (or some negatives). This makes the problem of OCC harder than the problem of conventional two-class classification. The task in OCC is to define a classification boundary around the positive class, such that it accepts as many objects as possible from the positive class, while it minimizes the chance of accepting the outlier objects. In OCC, since only one side of the boundary can be determined, it is hard to decide on the basis of just one-class how tightly the boundary should fit in each of the directions around the data. It is also harder to decide which features should be used to find the best separation of the positive and outlier class objects.
2.1 Measuring classification performance of one-class classifiers
As mentioned in the work of Tax (Reference Tax2001), a confusion matrix (see Table 1) can be constructed to compute the classification performance of one-class classifiers. To estimate the true error (as computed for multi-class classifiers), the complete probability density of both the classes should be known. In the case of OCC, the probability density of only the positive class is known. This means that only the number of positive class objects that are not accepted by the one-class classifier (i.e. the false negatives, F −) can be minimized. In the absence of examples and sample distribution from outlier class objects, it is not possible to estimate the number of outliers objects that will be accepted by the one-class classifier (the false positives, F +). Furthermore, it can be noted that since T + + F − = 1 and T − + F + = 1, the main complication in OCC is that only T + and F − can be estimated and nothing is known about F + and T −. Therefore, a limited amount of outlier class data is required to estimate the performance and generalize the classification accuracy of a one-class classifier. However, during testing if the outlier class is not presented in a reasonable proportion, then the actual accuracy values of the one-class classifier could be manipulated and they may not be the true representative of the metric; this point is explored in detail by Glavin and Madden (Reference Glavin and Madden2009). In such imbalanced data set scenarios, several other performance metrics can also be useful, such as f-score, geometric mean, etc. (Nguyen et al., Reference Nguyen, Abdesselam Bouzerdoum and Son2009).
3 Related Review Work in OCC
In recent years, there has been a considerable amount of research work carried out in the field of OCC. Researchers have proposed several OCC algorithms to deal with various classification problems. Mazhelis (Reference Mazhelis2006) presents a review of OCC algorithms and analyzed its suitability in the context of mobile-masquerader detection. In that paper, Mazhelis proposes a taxonomy of one-class classifiers classification techniques based on
1. The internal model used by classifier (density, reconstruction or boundary based),
2. the type of data (numeric or symbolic), and
3. the ability of classifiers to take into account temporal relations among feature (yes or no).
Mazhelis's survey of OCC describes a lot of algorithms and techniques; however, it covers a sub-spectrum of the problems in the field of OCC. As we describe in subsequent sections, OCC techniques have been developed and used by various researchers by different names in different contexts. The survey presented by Mazhelis (Reference Mazhelis2006) proposes a taxonomy suitable to evaluate the applicability of OCC to the specific application domain of mobile-masquerader detection.
Brew et al. (Reference Brew, Grimaldi and Cunningham2007) present a review of several OCC algorithms along with Gaussian Mixture models for the Speaker Verification problem. Their main work revolves around front-end processing and feature extraction from speech data, and speaker and imposter modeling and using them in OCC framework. Kennedy et al. (Reference Kennedy, Mac Namee and Delany2009) discuss some issues related to OCC and presents a review of several OCC approaches that includes statistical, neural networks and support vector machine-based methods. They also discuss the importance of including non-target data for building OCC models and use this study for developing credit-scoring system to identify good and bad creditors. Bergamini et al. (Reference Bergamini, Koerich and Sabourin2009) present a brief overview of OCC algorithms for the biometric applications. They identified two broad categories for OCC development as density approaches and boundary approaches. Bartkowiak (Reference Bartkowiak2011) presents survey of research on Anomaly, Outlier and OCC. The research survey is mostly focussed on research and their applications of OCC for detecting unknown behavior. Khan and Madden (Reference Khan and Madden2009) present a short survey of the recent trends in the field of OCC, wherein they present a taxonomy for the study of OCC methods. Their taxonomy is based on availability of training data, methodology used and application domains applied.
This publication is an extension of the work of Khan and Madden (Reference Khan and Madden2009), and is more comprehensive, in-depth and detailed. The survey in this publication identifies some important research areas, raises several open questions in the study of OCC and discusses significant contributions made by researchers (see Section 4). In this work, we neither restrict the review of literature pertaining to OCC to a particular application domain, nor to specific algorithms that are dependent on type of the data or model. Our aim is to cover as many algorithms, designs, contexts and applications where OCC has been applied in multiple ways (as shown by examples in Section 1). This publication does not intend to duplicate or re-state previous review work; little of the research work presented here may be found in the past surveys of Mazhelis (Reference Mazhelis2006), Brew et al. (Reference Brew, Grimaldi and Cunningham2007), Kennedy et al. (Reference Kennedy, Mac Namee and Delany2009), Bergamini et al. (Reference Bergamini, Koerich and Sabourin2009) or Bartkowiak (Reference Bartkowiak2011). Moreover, this publication encompasses a broader definition of OCC than many.
4 Proposed taxonomy
Based on the research work carried out in the field of OCC using different algorithms, methodologies and application domains, we present a unified approach to OCC by proposing a taxonomy for the study of OCC problems. The taxonomy is divided into three broad categories (see Figure 1):
Figure 1 Our taxonomy for the study of OCC techniques. OCC=one-class classification.
1. Availability of Training Data: learning with positive data only or learning with positive and unlabeled data and/or some amount of outlier samples.
2. Methodology Used: algorithms based on One-class Support Vector Machines (OSVMs) or methodologies based on algorithms other than OSVMs.
3. Application Domain: OCC applied in the field of text/document classification or in other application domains.
The proposed categories are not mutually exclusive, so there may be some overlapping among the research carried out in each of these categories. However, they cover almost all of the major research conducted by using the concept of OCC in various contexts and application domains. The key contributions in most OCC research fall into one of the above-mentioned categories. In the subsequent subsections, we will consider each of these categories in detail.
4.1 Category 1: Availability of training data
Th availability of training data plays a pivotal role in any OCC algorithm. Researchers have studied OCC extensively under three broad categories:
a Learning with positive examples only.
b Learning with positive examples and some amount of poorly sampled negative examples or artificially generated outliers.
c Learning with positive and unlabeled data.
Category (c) has been a matter of much research interest among the text/document classification community (Lee & Liu, Reference Lee and Liu2003; Li & Liu, Reference Li and Liu2003; Liu et al., Reference Liu, Dai, Li, Lee and Yu2003) that will be discussed in detail in Section 4.3.1.
Tax and Duin (Reference Tax and Duin1999a, Reference Tax and Duin1999b) and Schölkopf et al. (Reference Schölkopf, Platt, Shawe-Taylor, Smola and Williamson1999b) have developed various algorithms based on support vector machines to tackle the problem of OCC using positive examples only; for a detailed discussion on them, refer to Section 4.2.1. The main idea behind these strategies is to construct a decision boundary around the positive data so as to differentiate them from the outlier/negative data.
For many learning tasks, labeled examples are rare while numerous unlabeled examples are easily available. The problem of learning with the help of unlabeled data given a small set of labelled examples was studied by Blum and Mitchell (Reference Blum and Mitchell1998) by using the concept of co-training. The co-training approach can be applied when a data set has natural separation of their features and classifiers are built incrementally on them. Blum and Mitchell demonstrate the use of co-training methods to train the classifiers in the application of text classification. Under the assumptions that each set of the features is sufficient for classification, and the feature sets of each instance are conditionally independent given the class, they provide PAC (Probably Approximately Correct) learning (Valiant, Reference Valiant1984) guarantees on learning from labelled and unlabeled data and prove that unlabeled examples can boost accuracy. Denis (Reference Denis1998) was the first to conduct a theoretical study of PAC learning from positive and unlabeled data. Denis proved that many concept classes, specifically those that are learnable from statistical queries, can be efficiently learned in a PAC framework using positive and unlabeled data. However, the trade-off is a considerable increase in the number of examples needed to achieve learning, although it remains polynomial in size. De Comité et al. (Reference De Comité, Denis, Gilleron and Letouzey1999) give evidence with both theoretical and empirical arguments that positive examples and unlabeled examples can boost accuracy of many machine learning algorithms. They note that the learning with positive and unlabeled data is possible when the weight of the target concept (i.e. the ratio of positive examples) is known by the learner, which in turn can be estimated from a small set of labelled examples. Muggleton (Reference Muggleton2001) presents a theoretical study in the Bayesian framework where the distribution of functions and examples are assumed to be known. Liu et al. (Reference Liu, Lee, Yu and Li2002) extend Muggleton's result to the noisy case; they present sample complexity results for learning by maximizing the number of unlabeled examples labelled as negative while constraining the classifier to label all the positive examples correctly. Further details on the research carried out on training classifiers with labelled positive and unlabeled data is presented in Section 4.3.1.
4.2 Category 2: Algorithms used
Most of the major OCC algorithms development can be classified under two broad categories, as has been done either using
• OSVMs or
• Non-OSVMs methods (including various flavours of neural networks, decision trees, nearest neighbors and others).
It may appear at first that this category presents a biased view, by classifying algorithms according to whether or not they are based on OSVM vs. Non-OSVM. However, we have found that the advancements, applications, significance and difference that OSVM-based algorithms have shown opens it up as a separate research area in its own right. Nonetheless, Non-OSVM-based OCC algorithms have also been used for tackling specific research problems; the details are presented in the following sub-sections.
4.2.1 OSVM
Tax and Duin (Reference Tax and Duin1999a, Reference Tax and Duin1999b) seek to solve the problem of OCC by distinguishing the positive class from all other possible data objects in the pattern space. They constructed a hyper-sphere around the positive class data that encompasses almost all points in the data set with the minimum radius. This method is called the Support Vector Data Description (SVDD; see Figure 2). The SVDD classifier rejects a given test point as outlier if it falls outside the hyper-sphere. However, SVDD can reject some fraction of positively labelled data when the volume of the hyper-sphere decreases. The hyper-sphere model of the SVDD can be made more flexible by introducing kernel functions. Tax (Reference Tax2001) considers Polynomial and a Gaussian kernel and found that the Gaussian kernel works better for most data sets considered (Figure 3). Tax uses different values for the width of the kernel. The larger the width of the kernel, the fewer support vectors are selected and the description becomes more spherical. Also, using the Gaussian kernel instead of the Polynomial kernel results in tighter descriptions, but it requires more data to support more flexible boundary. Tax's method becomes inefficient when the data set has high dimension. It also does not work well when large variations in density exist among the positive-class objects; in such case, it starts rejecting the low-density target points as outliers. Tax (Reference Tax2001) demonstrates the usefulness of the approach on machine fault diagnostic data and handwritten digit data.
Figure 2 The hyper-sphere containing the target data, with center a and radius R. Three objects are on the boundary are the support vectors. One object xi is outlier and has ξ>0. Source: Tax (Reference Tax2001).
Figure 3 Data description trained on a banana-shaped data set. The kernel is a Gaussian kernel with different width sizes s. Support vectors are indicated by the solid circles; the dashed line is the description boundary. Source: Tax (Reference Tax2001).
Tax and Duin (Reference Tax and Duin2001b) propose a sophisticated method that uses artificially generated outliers to optimize the OSVM parameters in order to balance between over-fitting and under-fitting. The fraction of the outliers accepted by the classifier is an estimate of the volume of the feature space covered by the classifier. To compute the error without the use of outlier examples, they uniformly generate artificial outliers in and around the target class. If a hyper-cube is used, then in high dimensional feature space it becomes infeasible. In that case, the outlier objects generated from a hyper-cube will have very low probability to be accepted by the classifier. The volume in which the artificial outliers are generated has to fit as tightly as possible around the target class. To make this procedure applicable in high dimensional feature spaces, Tax and Duin propose to generate outliers uniformly in a hyper-sphere. This is done by transforming objects generated from a Gaussian distribution. Their experiments suggest that the procedure to artificially generate outliers in a hyper-sphere is feasible for up to 30 dimensions.
Schölkopf et al. (Reference Schölkopf, Williamson, Smola, Taylor and Platt2000, Reference Schölkopf, Williamson, Smola and Taylor1999a) present an alternative approach to SVDD. In their method, they construct a hyper-plane instead of a hyper-sphere around the data, such that this hyper-plane is maximally distant from the origin and can separate the regions that contain no data. They propose to use a binary function that returns +1 in ‘small’ region containing the data and −1 elsewhere. They introduce a variable that controls the effect of outliers, that is, the hardness or softness of the boundary around the data. Schölkopf et al. (Reference Schölkopf, Williamson, Smola and Taylor1999a) suggest the use of different kernels, corresponding to a variety of non-linear estimators. In practical implementations, the method of Schölkopf et al. and the SVDD method of Tax and Duin (Reference Tax and Duin2001b) operate comparably and both perform best when the Gaussian kernel is used. As mentioned by Campbell and Bennett (Reference Campbell and Bennett2001), the origin plays a crucial role in the methods of both Schölkopf et al. and Tax and Duin, which is a drawback since the origin effectively acts as a prior for where the abnormal class instances are assumed to lie; this is termed as the problem of origin. Schölkopf et al. (Reference Schölkopf, Williamson, Smola and Taylor1999a) have tested their method on both synthetic and real-world data, including the US Postal Services data set of handwritten digits. Their experiments show that the algorithm indeed extracts data objects that are difficult to be assigned to their respective classes and a number of outliers were in fact identified.
Manevitz and Yousef (Reference Manevitz and Yousef2001) investigate the use of OSVM for information retrieval. Their paper proposes a different version of the OSVM than that proposed by Schölkopf et al. (Reference Schölkopf, Platt, Shawe-Taylor, Smola and Williamson1999b); the method of Manevitz and Yousef is based on identifying outlier data that is representative of the second class. The idea of their methodology is to work first in the feature space, and assume that not only the origin is member of the outlier class, but also all data points close to the origin are considered as noise or outliers (see Figure 4). Geometrically speaking, the vectors lying on standard sub-spaces of small dimension, that is, axes, faces, etc., are to be treated as outliers. Hence, if a vector has few non-zero entries, then this indicates that the data object shares very few items with the chosen feature subset of the database and will be treated as an outlier. Linear, sigmoid, polynomial and radial basis kernels were used in their work. Manevitz and Yousef (Reference Manevitz and Yousef2001) evaluate the results on the Reuters data setFootnote 3 using the 10 most frequent categories. Their results are generally somewhat worse than the OSVM (Schölkopf et al., Reference Schölkopf, Williamson, Smola and Taylor1999a). However, they observe that when the number of categories are increased, their version of OSVM obtains better results. Li et al. (Reference Li, Huang, Tian and Xu2003) present an improved version of the approach of Schölkopf et al. (Reference Schölkopf, Williamson, Smola and Taylor1999a) for detecting anomaly in an intrusion detection system, with higher accuracy. Their idea is to consider all points ‘close enough’ to the origin as outliers and not just the origin as the member of second class (see Figure 5). Zhao et al. (Reference Zhao, Li, Li, Liu and Ren2005) use this method for customer churn prediction for the wireless industry data. They investigate the performance of different kernel functions for this version of OSVM, and show that the Gaussian kernel function can detect more churners than the Polynomial and Linear kernel.
Figure 4 Outlier SVM Classifier. The origin and small subspaces are the original members of the second class. Source: Manevitz and Yousef (Reference Manevitz and Yousef2001). SVM=Support Vector Machines.
Figure 5 Improved OSVM. Source: Li et al. (Reference Li, Huang, Tian and Xu2003). OSVM=One-class Support Vector Machines.
An extension to the work of Tax and Duin (Reference Tax and Duin1999a, Reference Tax and Duin1999b) and Schölkopf et al. (Reference Schölkopf, Williamson, Smola, Taylor and Platt2000) is proposed by Campbell and Bennett (Reference Campbell and Bennett2001). They present a kernel OCC algorithm that uses linear programming techniques instead of quadratic programming. They construct a surface in the input space that envelopes the data, such that the data points within this surface are considered targets and outside it are regarded as outliers. In the feature space, this problem condenses to finding a hyper-plane, which is pulled onto the data points and the margin remains either positive or zero. To fit the hyper-plane as tightly as possible, the mean value of the output of the function is minimized. To accommodate outliers, a soft margin is introduced around the hyper-plane. Their algorithm avoids the problem of the origin (stated earlier) by attracting the hyper-plane toward the center of data distribution rather than by repelling it away from a point outside the data distribution. In their work, different kernels are used to create hyper-planes and they show that the Radial Basis Function kernel can produce closed boundaries in input space while other kernels may not (Campbell and Bennett, Reference Campbell and Bennett2001). A drawback of their method is that it is highly dependent on the choice of kernel width parameter, σ. However, if the data size is large and contains some outliers then σ can be estimated. They show their results on artificial data set, Biomedical Data and Condition Monitoring data for machine fault diagnosis.
Yang and Madden (Reference Yang and Madden2007) apply particle swarm optimization to calibrate the parameters of OSVM (Schölkopf et al., Reference Schölkopf, Williamson, Smola, Taylor and Platt2000) and find experimentally that their method either matches or surpass the performance of OSVM with parameters optimized using grid search method, while using lower CPU time. Tian and Gu (Reference Tian and Gu2010) propose a refinement to the Schölkopf's OSVM model (Schölkopf et al., Reference Schölkopf, Williamson, Smola, Taylor and Platt2000) by searching optimal parameters using particle swarm optimization algorithm (Kennedy & Eberhart, Reference Kennedy and Eberhart1995) and improving the original decision function with a boundary movement. Their experiments show that after adjusting the threshold, the final decision function gives a higher detection rate and a lower rejection rate.
Luo et al. (Reference Luo, Ding, Pan, Ni and Hu2007) extends the work of Tax and Duin (Reference Tax and Duin2001b) to propose a cost-sensitive OSVM algorithm called Frequency-Based SVDD (F-SVDD) and Write-Related SVDD (WS-SVDD) for intrusion detection problem. The SVDD method gives equal cost to classification errors, whereas F-SVDD gives higher cost to frequent short sequences occurring during system calls and WS-SVDD gives different costs to different system calls. Their experiments suggest that giving different cost or importance to system users than to processes results in higher performance in intrusion detection than SVDD. Yang et al. (Reference Yang, Zhong, Liang, Wang, Yao and Lu2010b) propose a neighborhood-based OSVM method for fMRI (functional magnetic resonance imaging) data, where the objective is to classify individauls as having schizophrenia or not, based on fMRI scans of their brains. In their formulation of OSVM, they assume the neighborhood consistency hypothesis used by Chen et al. (Reference Chen, Yao, Becker, Zhou, Zeng and Chen2002). By integrating it with OSVM, they compute primal values which denote distance between points and hyper-plane in kernel space. For each voxel in an fMRI image, a new decision value is computed using the primal values and their neighbors. If this decision value is greater than a given threshold then it is regarded as activated voxel, otherwise it is regarded as non-activated. Their experiments on various brain fMRI data sets show that it gives more stable results than K-Means and fuzzy K-Means clustering algorithms.
Yu (Reference Yu2005) proposes a OCC algorithm with support vector machines (SVMs) using positive and unlabeled data and without labelled negative data and discuss some of the limitations of other OSVM-based OCC algorithms (Manevitz & Yousef, Reference Manevitz and Yousef2001; Tax & Duin, Reference Tax and Duin2001b). In assessing the performance of OSVMs under a scenario of learning with unlabeled data and no negative examples, Yu comments that to induce an accurate class boundary around the positive data set, OSVM requires a larger amount of training data. The support vectors in such a case come only from positive examples and cannot create a proper class boundary, which also leads to either over-fitting or under-fitting of the data (See Figure 6). Yu notes that when the numbers of support vectors in OSVM were increased, it overfits the data rather than being more accurate. Yu (Reference Yu2003) presents an OCC algorithm called Mapping Convergence (MC) to induce accurate class boundary around the positive data set in the presence of unlabeled data and without negative examples. The algorithm has two phases: mapping and convergence. In the first phase, a weak classifier (e.g. Rocchio, Reference Rocchio1971) is used to extract strong negatives (those that are far from the class boundary of the positive data) from the unlabeled data. In the second phase, a base classifier (e.g. SVM) is used iteratively to maximize the margin between positive and strong negatives for better approximation of the class boundary. Yu (Reference Yu2003) also presents another algorithm called Support Vector Mapping Convergence (SVMC) that works faster than the MC algorithm. At every iteration, SVMC only uses minimal data so that the accuracy of class boundary is not degraded and the training time of SVM is also saved. However, the final class boundary is slightly less accurate than the one obtained by employing MC. They show that MC and SVMC perform better than other OSVM algorithm and can generate accurate boundaries comparable to standard SVM with fully labelled data.
Figure 6 Boundaries of SVM and OSVM on a synthetic data set: big dots: positive data, small dots: negative data. Source: Yu (Reference Yu2005). SVM=Support Vector Machines.
Hao (Reference Hao2008) incorporates the concept of fuzzy set theory into OSVM (Schölkopf et al., Reference Schölkopf, Williamson, Smola and Taylor1999a) in order to deal with the problem that standard OSVM can be sensitive to outliers and noise. The main idea of Hao's method is that different training data objects may contribute differently to the classification, which can be estimated using fuzzy membership. Two versions of the fuzzy one-class classifier are proposed: (i) a crisp hyper-plane is constructed to separate target class from origin and fuzzy membership is associated to training data, where noisy and outlier data can be given low fuzzy membership values, (ii) a fuzzy hyper-plane is constructed to discriminate target class from others. Hao uses Gaussian kernels with different parameter settings and test their method on handwritten digits problem. Another fuzzy OSVM classifier is proposed by Choi and Kim (Reference Choi and Kim2004) for generating visually salient and semantically important video segments. Their algorithm gives different weights to the importance measure of the video segments and then estimates their support. They demonstrate the performance of their algorithm on several synthesized data sets and different types of videos.
4.2.2 One-class classifiers other than OSVMs
In this section, we review some major OCC algorithms that are based on one-class ensembles, neural networks, decision trees, nearest neighbors, Bayesian classifiers and other methods.
4.2.2.1 One-class classifier ensemble
As in traditional multi-class classification problems, one one-class classifier might not capture all characteristics of the data. However, using just the best classifier and discarding the classifiers with poorer performance might waste valuable information (Wolpert, Reference Wolpert1992). To improve the performance of different classifiers, which may differ in complexity or in the underlying training algorithm used to construct them, an ensemble of classifiers is a viable solution. This may serve to increase the performance and also the robustness of the classification (Sharkey & Sharkey, Reference Sharkey and Sharkey1995). Classifiers are commonly ensembled to provide a combined decision by averaging the estimated posterior probabilities. This simple algorithm is known to give good results for multi-class problems (Tanigushi & Tresp, Reference Tanigushi and Tresp1997). In the case of one-class classifiers, the situation is different. One-class classifiers cannot directly provide posterior probabilities for target (positive class) objects, because accurate information on the distribution of the outlier data is not available, as has been discussed earlier in this paper. In most cases, by assuming that the outliers are uniformly distributed, the posterior probability can be estimated. Tax (Reference Tax2001) mentions that in some OCC methods, distance is estimated instead of probability, and if there exists a combination of distance and probability outputs, they should be standardized before they can be combined. Having done so, the same types of combining rules as in conventional classification ensembles can be used. Tax and Duin (Reference Tax and Duin2001a) investigate the influence of the feature sets, their inter-dependence and the type of one-class classifiers for the best choice of combination rules. They use a Normal density and a mixture of Gaussians and the Parzen density estimation (Bishop, Reference Bishop1994) as two types of one-class classifiers. They use four models, the SVDD (Tax & Duin, Reference Tax and Duin1999b), K-means clustering, K-center method (Ypma & Duin, Reference Ypma and Duin1998) and an auto-encoder neural network (Japkowicz, Reference Japkowicz1999). In their experiments, the Parzen density estimator emerges as the best individual one-class classifier on the handwritten digit pixel data setFootnote 4. Tax (Reference Tax2001) shows that combining classifiers trained on different feature spaces is useful. In their experiments, the product combination rule gives the best results while the mean combination rule suffers from the fact that the area covered by the target set tends to be overestimated.
Lai et al. (Reference Lai, Tax, Duin, Pe¸kalska and Paclk2002) study combining one-class classifier for image database retrieval and show that combining SVDD-based classifiers improve the retrieval precision. Juszczak and Duin (Reference Juszczak and Duin2004) extend combining one-class classifierd for classifying missing data. Their idea is to form an ensemble of one-class classifiers trained on each feature or each pre-selected group of features, or to compute a dissimilarity representation from features. The ensemble is able to predict missing feature values based on the remaining classifiers. As compared with standard methods, their method is more flexible, since it requires significantly fewer classifiers and does not require re-training of the system whenever missing feature values occur. Juszczak and Duin (Reference Juszczak and Duin2004) also show that their method is robust to small sample size problems due to splitting the classification problem into several smaller ones. They compare the performance of their proposed ensemble method with standard methods used with missing features values problem on several UCI data sets (Bache & Lichman, Reference Bache and Lichman2013).
Ban and Abe (Reference Ban and Abe2006) address the problem of building a multi-class classifier based on an ensemble of one-class classifiers by studying two kinds of one-class classifiers, namely, SVDD (Tax & Duin, Reference Tax and Duin1999b) and Kernel Principal Component Analysis (Schölkopf et al., Reference Schölkopf, Smola and Müller1998). They construct a minimum-distance-based classifier from an ensemble of one-class classifiers that is trained from each class and assigns a test data object to a given class based on its prototype distance. Their method gives comparable performance to that of SVMs on some benchmark data sets; however, it is heavily dependent on the algorithm parameters. They also comment that their process could lead to faster training and better generalization performance provided appropriate parameters are chosen.
Pe¸kalska et al. (Reference Pe¸kalska, Skurichina and Duin2004) use the proximity of target object to its class as a ‘dissimilarity representation’ (DR) and show that the discriminative properties of various DRs can be enhanced by combining them properly. They use three types of one-class classifier, namely Nearest Neighbor, Generalized Mean Class and Linear Programming Dissimilarity Data Description. They make two types of ensembles: (i) combine different DR from individual one-class classifiers into one representation after proper scaling using fixed rules, for example average, product and train single one-class classifier based on this information, (ii) combine different DR of training objects over several base classifiers using majority voting rule. Their results show that both methods perform significantly better than the OCC trained with a single representation. Nanni (Reference Nanni2006) studies combining several one-class classifiers using the random subspace method (Ho, Reference Ho1998) for the problem of online signature verification. Nanni's method generates new training sets by selecting features randomly and then employing OCC on them; the final results of these classifiers are combined through the max rule. Nanni uses several one-class classifiers: Gaussian model description, Mixture of Gaussian Descriptions, Nearest Neighbor Method Description, PCA Description (PCAD), Linear Programming Description (LPD), SVDD and Parzen Window Classifier. It is shown that fusion of various classifiers can reduce the error and the best fusion method is the combination of LPD and PCAD. Cheplygina and Tax (Reference Cheplygina and Tax2011) propose to apply pruning to random sub-spaces of one-class classifiers. Their results show that pruned ensembles give better and more stable performance than the complete ensemble. Bergamini et al. (Reference Bergamini, Oliveira, Koerich and Sabourin2008) present the use of OSVM for biometric fusion where very low false acceptance rates are required. They suggest a fusion system that may be employed at the level of feature selection, score-matching or decision-making. A normalization step is used before combining scores from different classifiers. Bergamini et al. use z-score normalization, min–max normalization, and column norm normalization, and classifiers are combined using various ensemble rules. They find that min–max normalization with a weighted sum gives the best results on NIST Biometric Scores Set. Gesù and Bosco (Reference Gesù and Bosco2007) present an ensemble method of combining one-class fuzzy KNN classifiers. Their classifier combining method is based on a genetic algorithm optimization procedure by using different similarity measures. Gesù and Bosco test their method on two categorical data sets and show that whenever the optimal parameters are found, fuzzy combination of one-class classifiers may improve the overall recognition rate.
Bagging (Breiman, Reference Breiman1996) is an ensemble method (for multi-class classification problems) that combines multiple classifiers on re-sampled data to improve classification accuracy. Tu et al. (Reference Tu, Li and Dai2006) extends the one-class information bottleneck method for information retrieval by introducing bagging ensemble learning. The proposed ensemble emphasizes different parts of the data and results from different parameter settings are aggregated to give a final ranking, and the experimental results show improvements in image retrieval applications. Shieh and Kamm (Reference Shieh and Kamm2009) propose an ensemble method for combining OSVM (Tax and Duin, Reference Tax and Duin1999a) using bagging. However, bagging is useful when the classifiers are unstable and small changes in the training data can cause large changes in the classifier outputs (Bauer & Kohavi, Reference Bauer and Kohavi1999). OSVM is not an unstable classifier as its estimated boundary always encloses the positive class, therefore directly applying bagging on OSVM is not useful. Shieh and Kamm (Reference Shieh and Kamm2009) propose a kernel density estimation method to give weights to the training data objects, such that the outliers get the least weights and the positive class members get higher weights for creating bootstrap samples. Their experiments on synthetic and real data sets show that bagging OSVMs achieve higher true positive rate. They also mention that such a method is useful in application where low false positive rates are required, such as disease diagnosis.
Boosting methods are widely used in traditional classification problems (Dietterich, Reference Dietterich2000) for their high accuracy and ease of implementation. Rätsch et al. (Reference Rätsch, Mika, Schölkopf and Müller2002) propose a boosting-like OCC algorithm based on a technique called barrier optimization (Luenberger, Reference Luenberger1984). They also show, through an equivalence of mathematical programs, that a support vector algorithm can be translated into an equivalent boosting-like algorithm and vice versa. It has been pointed out by Schapire et al. (Reference Schapire, Feund, Bartlett and Lee1998) that boosting and SVMs are ‘essentially the same’ except for the way they measure the margin or the way they optimize their weight vector: SVMs use the l 2-norm to implicitly compute scalar products in feature space with the help of kernel trick, whereas boosting employs the l 1-norm to perform computation explicitly in the feature space. Schapire et al. comment that SVMs can be thought of as a ‘boosting’ approach in high dimensional feature space spanned by the base hypotheses. Rätsch et al. (Reference Rätsch, Mika, Schölkopf and Müller2002) exemplify this translation procedure for a new algorithm called the one-class leveraging. Building on barrier methods, a function is returned which is a convex combination of the base hypotheses that leads to the detection of outliers. They comment that the prior knowledge that is used by boosting algorithms for the choice of weak learners can be used in OCC and show the usefulness of their results on artificially generated toy data and the US Postal Service database of handwritten characters.
4.2.2.2 Neural networks
de Ridder et al. (Reference de Ridder, Tax and Duin1998) conduct an experimental comparison of various OCC algorithms. They compare a number of unsupervised methods from classical pattern recognition to several variations of a standard shared weight supervised neural network (Cun et al., Reference Cun, Boser, Denker, Henderson, Howard, Hubbard and Jackel1989) and show that adding a hidden layer with radial basis function improves performance. Manevitz and Yousef (Reference Manevitz and Yousef2000a) show that a simple neural network can be trained to filter documents when only positive information is available. They design a bottleneck filter that uses a basic feed-forward neural network that can incorporate the restriction of availability of only positive examples. They chose three level network with m input neurons, m output neurons and k hidden neurons, where k < m. The network is trained using a standard back-propagation algorithm (Rumelhart & McClelland, Reference Rumelhart and McClelland1986) to learn the identity function on the positive examples. The idea is that while the bottleneck prevents learning the full identity function on m-space, the identity on the small set of examples is in fact learnable. The set of vectors for which the network acts as the identity function is more like a sub-space, which is similar to the trained set. For testing a given vector, it is shown to the network and if the result is the identity, the vector is deemed interesting (i.e. positive class) otherwise it is deemed an outlier. Manevitz and Yousef (Reference Manevitz and Yousef2000b) apply the auto-associator neural network to document classification problem. During training, they check the performance values of the test set at different levels of error. The training process is stopped at the point where the performance starts a steep decline. A secondary analysis is then performed to determine an optimal threshold. Manevitz and Yousef test the method and compare it with a number of competing approaches (i.e. Neural Network, Naïve Bayes, Nearest Neighbor and Prototype algorithm) and conclude that it outperforms them.
Skabar (Reference Skabar2003) describes how to learn a classifier based on feed-forward neural network using positive examples and corpus of unlabeled data containing both positive and negative examples. In a conventional feed-forward binary neural network classifier, positive examples are labelled as 1 and negative examples as 0. The output of the network represents the probability that an unknown example belongs to the target class, with a threshold of 0.5 typically used to decide which class an unknown sample belongs to. However, in this case, since unlabeled data can contain some unlabeled positive examples, the output of the trained neural network may be less than or equal to the actual probability that an example belongs to the positive class. If it is assumed that the labelled positive examples adequately represent the positive concept, it can be hypothesized that the neural network will be able to draw a class boundary between negative and positive examples. Skabar shows the application of the technique to the prediction of mineral deposit location.
4.2.2.3 Decision trees
Several researchers have used decision tress to classify positive samples from a corpus of unlabeled examples. De Comité et al. (Reference De Comité, Denis, Gilleron and Letouzey1999) present experimental results showing that positive examples and unlabeled data can efficiently boost accuracy of the statistical query learning algorithms for monotone conjunctions in the presence of classification noise and present experimental results for decision tree induction. They modify standard C4.5 algorithm (Quinlan, Reference Quinlan1993) to get an algorithm that uses unlabeled and positive data and show the relevance of their method on UCI data sets. Letouzey et al. (Reference Letouzey, Denis and Gilleron2000) design an algorithm which is based on positive statistical queries (estimates for probabilities over the set of positive instances) and instance statistical queries (estimates for probabilities over the instance space). The algorithm guesses the weight of the target concept, that is, the ratio of positive instances in the instance space and then uses a hypothesis testing algorithm. They show that the algorithm can be estimated in polynomial time and is learnable from positive statistical queries and instance statistical queries only. Then, they design a decision tree induction algorithm, called POSC4.5, using only positive and unlabeled data and present experimental results on UCI data sets that are comparable to the C4.5 algorithm. Yu (Reference Yu2005) comments that such rule learning methods are simple and efficient for learning nominal features but are tricky to use for data with continuous features, high dimensions, or sparse instance spaces. Li and Zhang (Reference Li and Zhang2008) perform bagging ensemble on POSC4.5 and classify test samples using the majority voting rule. Their result on UCI data sets shows that the classification accuracy and robustness of POSC4.5 could be improved by applying their technique. Based on very fast decision trees (VFDT; Domingos & Hulten, Reference Domingos and Hulten2000) and POSC4.5, Li et al. (Reference Li, Zhang and Li2009) propose a one-class VFDT for data streams with applications to credit fraud detection and intrusion detection. They state that by using the proposed algorithm, even if 80% of the data is unlabeled, the performance of one-class VFDT is very close to the standard VFDT algorithm. Désir et al. (Reference Désir, Bernard, Petitjean and Heutte2012) propose a one-class Random Forest algorithm that internally conjoins bagging and random feature selection (RFS) for decision trees. They note that the number of artificial outliers to be generated to convert an one-class classifier to a binary classifier can be exponential with respect to the size of the feature space and availability of positive data objects. They propose a novel algorithm to generate outliers in small feature spaces by combining RFS and Random Subspace methods. Their method aims at generating more artificial outliers in the regions where the target data objects are sparsely populated and less in areas where the density of target data objects is high. They compare their method against OSVM, Gaussian Estimator, Parzen Windows and Mixture of Gaussian Models on an image medical data set and two UCI data sets and show that it performs equally well or better than the other algorithms.
4.2.2.4 Nearest neighbors
Tax (Reference Tax2001) presents a one-class Nearest Neighbor method, called Nearest Neighbor Description (NN-d), where a test object z is accepted as a member of target class provided that its local density is greater than or equal to the local density of its nearest neighbor in the training set. The first nearest neighbor is used for the local density estimation (1-NN). The following acceptance function is used:
$$$ f_{{NN^{{tr}} }} (z)\, = \,I\left( \displaystyle{{{\parallel z\,{\rm - }\,NN^{{tr}} (z)\parallel } \over {\parallel NN^{{tr}} (z)\,{\rm - }\,NN^{{tr}} (NN^{{tr}} (z))\parallel }}} \right) $$$
which shows that the distance from object z to its nearest neighbor in the training set NN tr (z) is compared with the distance from this nearest neighbor NN tr (z) to its nearest neighbor (see Figure 7).
Figure 7 The nearest neighbor data description. Source: Tax (Reference Tax2001).
The NN-d has several predefined choices to tune various parameters. Different numbers of nearest neighbors can be considered; however, increasing the number of neighbors will decrease the local sensitivity of the method, but it will make the method less sensitive to noise. Instead of 1-NN, the distance to the kth nearest neighbor or the average of the k distances to the first k neighbors can also be used. The value of the threshold (default 1.0) can be changed to either higher or lower values to change the detection sensitivity of the classifier. Tax and Duin (Reference Tax and Duin2000) proposes a nearest neighbor method capable of finding data boundaries when the sample size is very low. The boundary thus constructed can be used to detect the targets and outliers. However, this method has the disadvantage that it relies on the individual positions of the objects in the target set. Their method seems to be useful in situations where the data is distributed in subspaces. They test the technique on both real and artificial data and find it to be useful when very small amounts of training data exist (fewer than five samples per feature).
Datta (Reference Datta1997) modify the standard nearest neighbor algorithm that is appropriate to learn a single class or the positive class. Their modified algorithm, NNPC (nearest neighbor positive class), takes examples from only one class as input. NNPC learns a constant δ, which is the maximum distance a test example can be from any learned example and still be considered a member of the positive class. Any test data object that has a distance greater than δ from any training data object will not be considered a member of the positive class. The variable δ is calculated by
$$$ \delta \, = \,Max\{ \forall xMin\{ \forall y \ne xdist(x,y)\} \} $$$
where x and y are two examples of the positive class, and Euclidean distance, dist (x, y) is used as the distance function. Datta also experimented with another similar modification which involves learning a vector 
$$\[--><$> \less {{\delta }_1}, \ldots, {{\delta }_n} \great <$><!--$$
, where δi is the threshold for the ith example. This modification records the distance to the closest example for each example. δi is calculated by
$$$ \delta _{i} \, = \,Min\{ \forall y \ne x_{i} dist(x_{i}, y)\} $$$
where xi is the ith training example. To classify a test example the same classification rule as above is used.
Munroe and Madden (Reference Munroe and Madden2005) extend the idea of one-class KNN to tackle the recognition of vehicles using a set of features extracted from their frontal view, and present results showing high accuracy in classification. They compare their results with multi-class classification methods and comment that it is not reasonable to draw direct comparisons between the results of the multi-class and single-class classifiers, because the use of training and testing data sets and the underlying assumptions are quite different. They also note that the performance of multi-class classifier could be made arbitrarily worse by adding those vehicle types to the test set that do not appear in the training set. Since one-class classifiers can represent the concept “none of the above”, their performance should not deteriorate in these conditions. Cabral et al. (Reference Cabral, Oliveira and Cahu2007) propose a one-class nearest neighbor data description using the concept of structural risk minimization. k-Nearest Neighbors (kNN) suffers from the limitation of having to store all training samples as prototypes that would be used to classify an unseen sample. Their paper is based on the idea of removing redundant samples from the training set, thereby obtaining a compact representation aiming at improving generalization performance of the classifier. The results on artificial and UCI data sets show improved performance than the NN-d classifiers and also achieved considerable reduction in number of stored prototypes. Cabral et al. (Reference Cabral, Oliveira and Cahu2009) present another approach where not only 1-NN is considered but all of the k-nearest neighbors, to arrive at a decision based on majority voting. In their experiments on artificial data, biomedical dataFootnote 5 and data from the UCI repository, they observe that the k-NN version of their classifier outperforms the 1-NN and is better than NN-d algorithms. Gesù et al. (Reference Gesú, Bosco and Pinello2008) present a one-class KNN and test it on synthetic data that simulates microarray data for the identification of nucleosomes and linker regions across DNA. A decision rule is presented to classify an unknown sample X as
$$$ X\, = \,\left\{ {\matrix{ {1,} \hfill &#x0026; {{\rm if}|y \in T_{p} \quad {\rm such \ that}\quad \delta (y,x)\leq \varphi |\geq K} \hfill \cr {0,} \hfill &#x0026; {{\rm otherwise}} \hfill \cr } } \right. $$$
where TP is the training set for the data object P representing positive instance, δ is the dissimilarity function between data objects and j = 1 means that x is positive. The meaning of the above rule is that if there are at least K data objects in TP with dissimilarity from x no more than ϕ, then x is classified as a positive data object, otherwise it is classified as an outlier. This kNN model depends on parameters K and ϕ and their values are chosen by using optimization methods. Their results have shown good recognition rate on synthetic data for nucleosome and linker regions across DNA.
de Haro-Garca et al. (Reference de Haro-Garca, Garca-Pedrajas, Romero del Castillo and Garca-Pedrajas2009) use one-class KNN along with other one-class classifiers for identifying plant/pathogen sequences, and present a comparison of results. They find that these methods are suitable owing to the fact that genomic sequences of plant are easy to obtain in comparison to pathogens, and they build one-class classifiers based only on information from the sequences of the plant. One-class kNN classifiers are used by Glavin and Madden (Reference Glavin and Madden2009) to study the effect of unexpected outliers that might arise in classification (in their case, they considered the task of classifying spectroscopic data). According to the authors, unexpected outliers can be defined as those outliers that do not come from the same distribution of data as the postive cases or outlier cases in the training data set. Their experiments show that the one-class kNN method is more reliable for the task of detecting such outliers than a similar binary kNN classifier. The ‘kernel approach’ has been used by various researchers to implement different flavours of NN-based classifier for multi-class classification. Khan (Reference Khan2010) extends this idea and propose two variants of one-class nearest neighbor classifiers. These variants use a kernel as a distance metric instead of Euclidean diistance for identification of chlorinated solvents in the absence of non-chlorinated solvents. The first method finds the neighborhood for nearest k neighbors, while the second method finds j localized neighborhoods for each of k neighbors. Popular kernels like the polynomial kernel (of degree 1 and 2), RBF and spectroscopic kernels (Spectral Linear Kernel (Howley, Reference Howley2007) and Weighted Spectral Linear Kernel (Madden & Howley, Reference Madden and Howley2008)) are used in their experiments. Their kernelized kNN methods perform better than standard NN-d and 1-NN methods and that a one-class classifier with RBF Kernel as distance metric performs better when compared with other kernels.
4.2.2.5 Bayesian classifiers
Datta (Reference Datta1997) suggests a method to learn a Naïve Bayes (NB) classifier from samples of positive class data only. Traditional NB attempts to find the probability of a class given an unlabeled data object p(Ci|A 1=ν 1 & … & An=νn). By assuming that the attributes are independent and applying Bayes’ theorem the previous calculation is proportional to:
$$\left[\prod\limits_j^{attributes} p(A_{j} \, = \,\nu |C_{i} )\right]p(C_{i} )$$
where Aj is an attribute, ν is a value of the attribute, Ci is a class and the probabilities are estimated using the training examples. When only the positive class is available, the calculation of p(Ci) from the above equation cannot be done correctly. Therefore, Datta (Reference Datta1997) modifies NB to learn in a single class situation and calls their modification NBPC (Naïve Bayes Positive Class) that uses the probabilities of the attribute-values. NBPC computes a threshold t as
$$ t\, = \,Min \left[\forall x\prod\limits_j^{attributes} p(A_{j} \, = \,\nu _{i} )\right] $$
where Aj = νi is the attribute value for the example x and p(Aj = νi) is the probability of the attribute's ith value. The probabilities for the different values of attribute Aj is normalized by the probability of the most frequently occurring ν. During classification, if for the test example 
$$\[--><$>\prod\nolimits_j^{attributes} ({{A}_j}\, = \,{{\nu }_i})\geq t<$><!--$$
, then the test example is predicted as a member of the positive class. Datta tests the above positive class algorithms on various data sets taken from UCI repository and conclude that NNPC (discussed in previous section) and NBPC have classification accuracy (both precision and recall values) close to C4.5's value, although C4.5 decision trees are learned from all classes, whereas each of the one-class classifiers is learned using only one class. Wang and Stolfo (Reference Wang and Stolfo2003) use a simple one-class NB method that uses only positive samples, for masquerade detection in a network. The idea is to generate a user's profile (u) using UNIX commands (c) and compute the conditional probability 
$$\[--><$> p(c|u) <$><!--$$
for user u's self profile. For the non-self profile, they assume that each command has a random probability 
$$\[--><$>{{\rm 1} \over m} <$><!--$$
. For testing a sample d, they compare the ratios 
$$\[--><$> p(d|self) <$><!--$$
and 
$$\[--><$> p(d|non{\rm{\hbox - }}self) <$><!--$$
. The larger the value of this ratio, it is more likely that the command d has come from user u.
4.2.2.6 Other methods
Wang et al. (Reference Wang, Lopes and Tax2004) investigate several OCC methods in the context of Human–Robot interaction for image classification into faces and non-faces. Some of the important non-standard methods used in their study are Gaussian Data Description, k-Means, Principal Component Analysis and Linear Programming (Pe¸kalska et al., Reference Pe¸kalska, Tax and Duin2002), as well as the SVDD. They study the performance of these OCC methods on an image recognition data set and observe that SVDD attains better performance in comparison to the other OCC methods studied, due to its flexibility relative to the other methods, which use very strict models of separation, such as planar shapes. They also investigate the effect of varying the number of features and remark that more features do not always guarantee better results, because with an increase in the number of features, more training data are needed to reliably estimate the class models. Ercil and Buke (Reference Ercil and Buke2002) report a different technique to tackle the OCC problem, based on fitting an implicit polynomial surface to the point cloud of features, to model the target class in order to separate it from the outliers. They show the utility of their method for the problem of defect classification, where there are often plentiful samples for the non-defective class but only very few samples for various defective classes. They use an implicit polynomial fitting technique and show a considerable improvement in the classification rate, in addition to having the advantage of requiring data only from non-defective motors in the learning stage. A fuzzy one-class classifier is proposed by Bosco and Pinello (Reference Bosco and Pinello2009) for identifying patterns of signals embedded in a noisy background. They employed a Multi-Layer Model (Gesù et al., Reference Gesù, Bosco, Pinello, Yuan and Corona2009) as a data processing step and then use their proposed fuzzy one-class classifier for testing on microarray data. Their results show that integrating these two methods could improve the overall classification results. Juszczak et al. (Reference Juszczak, Tax, Pe¸kalska and Duin2009) propose a one-class classifier that is built on the minimum spanning tree of only the target class. The method is based on a graph representation of the target class to capture the underlying structure of the data. This method performs distance-based classification as it computes the distance from a test object to its closest edge. They show that their method performs well when the data size is small and has high dimensions. Seguì et al. (Reference Seguì, Igual and Vitrià2010) suggest that the performance of the method of Juszczak et al. is reduced in the presence of outliers in the target class. To circumvent this problem, they present two bagging ensemble approaches that are aimed to reduce the influence of outliers in the target training data and show improved performance on both real and artificially contaminated data. Hempstalk et al. (Reference Hempstalk, Frank and Witten2008) present a OCC method that combines a density estimator to draw a reference distribution and a standard model for estimating class probability for the target class. They use the reference distribution to generate artificial data for the second class and decompose this problem as a standard two-class learning problem and show that their results on UCI data set and typist data set are comparable with standard OSVM (Schölkopf et al., Reference Schölkopf, Williamson, Smola, Taylor and Platt2000), with the advantage of not having to specify a target rejection rate at the time of training. Silva and Willett (Reference Silva and Willett2009) present a high dimension anomaly detection method that uses limited amount of unlabeled data. Their algorithm uses a variational Expectation-Maximization (EM) method on the hypergraph domains that allows edges to connect more than two vertices simultaneously. The resulting estimate can be used to compute degree of anomalousness based on a false-positive rate. The proposed algorithm is linear in the number of training data objects and does not require parameter tuning. They compare the method with OSVM and another K-point entropic graph method on synthetic data and the very high dimensional Enron email database, and conclude that their method outperforms both of the other methods.
4.3 Category 3: Application domain applied
4.3.1 Text/document classification
Traditional text classification techniques require an appropriate distribution of positive and negative examples to build a classifier; thus they are not suitable for the problem of OCC. It is of course possible to manually label some negative examples, though depending on the application domain, this may be a labor-intensive and time-consuming task. However, the core problem remains, that it is difficult or impossible to compile a set of negative samples that provides a comprehensive characterization of everything that is ‘not’ the target concept, as is assumed by a conventional binary classifier. It is a common practice to build text classifiers using positive and unlabeled examplesFootnote 6 (in semi-supervised settingFootnote 7) as collecting unlabeled samples is relatively easy and fast in many text or Web page domains (Nigam et al., Reference Nigam, McCallum, Thrun and Mitchell2000; Liu et al., Reference Liu, Lee, Yu and Li2002). In this section, we will discuss some of the algorithms that exploit this methodology with application to text classification.
The ability to build classifiers without negative training data is useful in a scenario if one needs to extract positive documents from many text collections or sources. Nigam et al. (Reference Nigam, McCallum, Thrun and Mitchell2000) show that accuracy of text classifiers can be improved by adding small amount of labelled training data to a large available pool of unlabeled data. They introduce an algorithm based on EM and NB. The central idea of their algorithm is to train the NB classifier based on the labelled documents and then probabilistically label the unlabeled documents and repeat this process till it converges. To improve the performance of the algorithm, they propose two variants that give weights to modulate the amount of unlabeled data, and use mixture components per class. They show that using this type of methodology can result in reduction of error by factor of up to 30%. Liu et al. (Reference Liu, Dai, Li, Lee and Yu2003) study the problem of learning from positive and unlabeled data and suggest that many algorithms that build text classifiers are based on two steps:
1. Identifying a set of reliable/strong negative documents from the unlabeled set. In this step, Spy-EM (Liu et al., Reference Liu, Lee, Yu and Li2002) uses a Spy technique, PEBL (Yu et al., Reference Yu, Han and Chang2004) uses a technique called 1-DNF (Yu et al., Reference Yu, Han and Chang2002), and Roc-SVM (Liu et al., Reference Liu, Dai, Li, Lee and Yu2003) uses the Rocchio algorithm (Rocchio, Reference Rocchio1971).
2. Building a set of classifiers by iteratively applying a classification algorithm and then selecting a good classifier from the set. In this step, Spy-EM uses the Expectation Maximization (EM) algorithm with a NB classifier, while PEBL and Roc-SVM use SVM. Both Spy-EM and Roc-SVM have same methods for selecting the final classifier. PEBL simply uses the last classifier at convergence, which can be a poor choice.
These two steps together work in an iterative manner to increase the number of unlabeled examples that are classified as negative, while at the same time maintain the correct classification of positive examples. It was shown theoretically by Yu et al. (Reference Yu, Han and Chang2002) that if the sample size is large enough, maximizing the number of unlabeled examples classified as negative while constraining the positive examples to be correctly classified will give a good classifier. Liu et al. (Reference Liu, Dai, Li, Lee and Yu2003) introduce two new methods, one for Step 1 (i.e. the NB) and one for Step 2 (i.e. SVM alone) and perform an evaluation of all 16 possible combinations of methods for Step 1 and Step 2 that were discussed above. They develop a benchmarking system called LPU (Learning from Positive and Unlabeled Data)Footnote 8 and propose an approach based on a biased formulation of SVM that allows noise (or error) in positive examples. Their experiments on Reuters and Usenet articles suggest that the biased-SVM approach outperforms all existing two-step techniques.
Yu et al. (Reference Yu, Zhai and Han2003) explore SVMC (Yu, Reference Yu2003) (for detail on this technique refer to Section 4.2.1) for performing text classification without labelled negative data. They use Reuters and WebKbFootnote 9 corpora for text classification and compare their method against six other methods: Simple MC, OSVM, Standard SVM trained with positive examples and unlabeled documents substituted for negative documents, Spy-EM, NB with Negative Noise and Ideal SVM trained from completely labelled documents. They conclude that with a reasonable number of positive documents, the MC algorithm gives the best performance among all the methods they considered. Their analysis show that when the positive training data is not under-sampled, SVMC significantly outperforms other methods because SVMC tries to exploit the natural gap between positive and negative documents in the feature space, which eventually helps to improve the generalization performance. Peng et al. (Reference Peng, Zuo and He2006) present a text classifier from positive and unlabeled documents based on Genetic Algorithms (GA) by adopting a two stage strategy (as discussed above). Firstly, reliable negative documents are identified by an improved 1-DNF algorithm. Secondly, a set of classifiers are built by iteratively applying the SVM algorithm on training data. They then discuss an approach to evaluate the weighted vote of all classifiers generated in the iteration steps, to construct the final classifier based on a GA. They comment that the GA evolving process can discover the best combination of the weights. Their experiments are performed on the Reuters data set and compared against PEBL and OSVM and it is shown that the GA based classification performs better.
Koppel and Schler (Reference Koppel and Schler2004) study the Authorship Verification problem where only examples of writings of a single author is given and the task is to determine if given piece of text is or is not written by this author. Traditional approaches to text classification cannot be applied directly to this kind of classification problem. Hence, they present a new technique called ‘unmasking’ in which features that are most useful for distinguishing between books A and B are iteratively removed and the speed with which cross-validation accuracy degrades is gauged as more features are removed. The main hypothesis is that if books A and B are written by the same author, then no matter what differences there may be between them (of genres, themes etc), the overall essence or regularity in writing style can be captured by only a relatively small number of features. For testing the algorithm, they consider a collection of twenty-one 19th century English books written by 10 different authors and spanning a variety of genres and obtain overall accuracy of 95.7% with errors almost equally distributed between false positives and false negatives. Onoda et al. (Reference Onoda, Murata and Yamada2005) report a document retrieval method using non-relevant documents. Users rarely provide a precise query vector to retrieve desired documents in the first iteration. In subsequent iterations, the user evaluates whether the retrieved documents are relevant or not, and correspondingly the query vector is modified in order to reduce the difference between the query vector and documents evaluated as relevant by the user. This method is called relevance feedback. The relevance feedback needs a set of relevant and non-relevant documents to work usefully. However, sometimes the initial retrieved documents that are presented to a user do not include relevant documents. In such a scenario, traditional approaches for relevance feedback document retrieval systems do not work well, because the system needs relevant and non relevant documents to construct a binary classifier (see Figure 8). To solve this problem, Onoda et al. propose a feedback method using information from non-relevant documents only, called non-relevance feedback document retrieval. The design of non-relevance feedback document retrieval is based on OSVM (Schölkopf et al., Reference Schölkopf, Platt, Shawe-Taylor, Smola and Williamson1999b). Their proposed method selects documents that are discriminated as not non-relevant and that are near the discriminant hyper-plane between non-relevant document and relevant documents. They compare the proposed approach with conventional relevance feedback methods and vector space model without feedback and show that it consistently gives better performance as compared to other methods. Pan et al. (Reference Pan, Zhou, Cao, Liu, Lukose, Scholz and Yang2008) extend the concept of classifying positive examples with unlabeled samples in the Collaborative Filtering (CF) application. In CF, the positive data is gathered based on user interaction with the web like news items recommendation or bookmarking pages, etc. However, due to ambiguous interpretations, limited knowledge or lack of interest of users, the collection of valid negative data may be hampered. Sometime negative and unlabeled positive data are severely mixed up and it becomes difficult to discern them. Manually labeling negative data is not only intractable considering the size of the web but also will be poorly sampled. Traditional CF algorithms either label negative data, or assume missing data are negative. Both of these approaches have an inherent problem of being expensive and biased to the recommendation results. Pan et al. (Reference Pan, Zhou, Cao, Liu, Lukose, Scholz and Yang2008) propose two approaches to one-class CF to handle the negative sparse data to balance the extent to which to treat missing values as negative examples. Their first approach is based on weighted low rank approximation (Srebro & Jaakkola, Reference Srebro and Jaakkola2003) that works on the idea of providing different weights to error terms of both positive and negative examples in the objective function. Their second approach is based on sampling missing values as negative examples. They perform experiments on real world data from social bookmarking site del.icio.us and Yahoo News data set and show that their method outperforms other state of the art CF algorithms.
Figure 8 Outline of a problem in the relevance feedback documents retrieval. Source: Onoda et al. (Reference Onoda, Murata and Yamada2005).
Denis et al. (Reference Denis, Gilleron and Tommasi2002) introduce a NB algorithm and shows its feasibility for learning from positive and unlabeled documents. The key step in their method is the estimation of word probabilities for the negative class, because negative examples were not available. This limitation can be overcome by assuming an estimate of the positive class probability (the ratio of positive documents in the set of all documents). In practical situations, the positive class probability can be empirically estimated or provided by domain knowledge. Their results on WebKB data set show that error rates of NB classifiers obtained from p positive data objects, PNB (Positive Naïve Bayes), trained with enough unlabeled examples are lower than error rates of NB classifiers obtained from p labeled documents. Denis et al. (Reference Denis, Laurent, Gilleron and Tommasi2003) consider situations where only a small set of positive data is available together with unlabeled data. Constructing an accurate classifier in these situations may fail because of the shortage of properly sampled data. However, learning in this scenario may still be possible using the co-training framework (Blum & Mitchell, Reference Blum and Mitchell1998) that looks for two feature views over the data. They propose a Positive Naïve Co-Training algorithm, PNCT, that takes a small pool of positive documents as its seed. PNCT first incrementally builds NB classifiers from positive and unlabeled documents over each of the two views by using PNB. Along the co-training steps, self-labelled positive examples and self-labelled negative examples are added to the training sets. A base algorithm is also proposed which is a variant of PNB that is able to use these self-labelled examples. The experiments on the WebKB data set show that co-training algorithms lead to significant improvement of classifiers, even when the initial seed is only composed of positive documents. Calvo et al. (Reference Calvo, Larrañaga and Lozano2007) extend the PNB classification idea to build more complex Bayesian classifiers in the absence of negative samples when only positive and unlabeled data are present. A positive tree augmented NB (PTAN) in a positive-unlabeled scenario is proposed along with the use of a Beta distribution to model the a priori probability of the positive class, and it is applied to PNB and PTAN. The experiments suggest that when the predicting attributes are not conditionally independent, PTAN performs better than PNB. The proposed Bayesian approach to estimating apriori probability of the positive class also improves the performance of PNB and PTAN. He et al. (Reference He, Zhang, Li and Wang2010) improves the PNB by selecting the value of the prior probability of the positive class on the validation set using a performance measure that can be estimated from positive and unlabeled examples. Their experiments suggest that the proposed algorithm performs well even without the user specifying the prior probability of the positive class.
Pan et al. (Reference Pan, Zhang, Li and Wang2010) propose two variants of a nearest neighbor classifier for classification of uncertain data under learning from positive and unlabeled scenario. The method outperforms the NN-d (Tax & Duin, Reference Tax and Duin2000) and OCC method by Hempstalk et al. (Reference Hempstalk, Frank and Witten2008). Elkan and Noto (Reference Elkan and Noto2008) show that if a classifier is trained using labelled and unlabeled data then its predicted probabilities differ from true probabilities only by a constant factor. They test their method on the application of identifying protein records and show it performs better in comparison to the standard biased SVM method (Liu et al., Reference Liu, Dai, Li, Lee and Yu2003). Zhang et al. (Reference Zhang, Li and Orlowska2008) propose a OCC method for the classification of text streams with concept drift. In situations where text streams withe large volumes of documents arrive at high speed, it is difficult to label all of them and few positive samples are labelled. They propose a stacked ensemble approach and compare it against other window-based approaches and demonstrate its better performance. Blanchard et al. (Reference Blanchard, Lee and Scott2010) present a different outlook on learning with positive and unlabeled data that develops general solution to this problem by a surrogate problem related to Neyman-Pearson classification, which is a binary classification problem subject to a constraint on false-positive rate while minimizing the false-negative rate. It is to be noted that in their problem formulation, outliers are not assumed to be rare but that special case is also discussed. They perform theoretical analysis to deduce generalization error bounds, consistency and rates of convergence for novelty detection and show that this approach optimally adapts to unknown novelty distributions, whereas the traditional methods assume a fixed uniform distribution. Their experiments compare the proposed method with OSVM on several data setsFootnote 10 and find comparable performance. Learning from positive and unlabeled data has been studied in other domains as well apart from text classification such as facial expression recognition (Cohen et al., Reference Cohen, Sebe, Gozman, Cirelo and Huang2003), gene regulation networks (Cerulo et al., Reference Cerulo, Elkan and Ceccarelli2010), etc.
4.3.2 Other Application Domains
In this subsection we will highlight some of the other applications of OCC methods that may not necessarily employ learning from positive and unlabeled data. Some of these areas are: Handwriting Detection (Schölkopf et al., Reference Schölkopf, Williamson, Smola, Taylor and Platt2000; Tax, Reference Tax2001; Tax & Duin, Reference Tax and Duin2001b; Hempstalk et al., Reference Hempstalk, Frank and Witten2008); Information Retrieval (Manevitz & Yousef, Reference Manevitz and Yousef2001); Missing Data/Data Correction (Juszczak & Duin, Reference Juszczak and Duin2004; Xiaomu et al., Reference Xiaomu, Guoliang and Rao2008); Image Database Retrieval (Chen et al., Reference Chen, Zhou and Huang2001; Tax & Duin, Reference Tax and Duin2001b; Gondra et al., Reference Gondra, Heisterkamp and Peng2004; Seo, Reference Seo2007); Face/Object Recognition Applications (Wang et al., Reference Wang, Lopes and Tax2004; Bicego et al., Reference Bicego, Grosso and Tistarelli2005; Zeng et al., Reference Zeng, Fu, Roisman, Wen, Hu and Huang2006), Remote Sensing (Li et al., Reference Li, Guo and Elkan2011); Stream Mining (Zhang et al., 2008, 2010; Liu et al., Reference Liu, Xiao, Cao and Yu2011); Chemometrics and Spectroscopy (Xu & Brereton, Reference Xu and Brereton2007; Glavin & Madden, Reference Glavin and Madden2009; Hao et al., Reference Hao, Wen, Sheng, Rong and Ping2010; Khan, Reference Khan2010; Kittiwachana et al., Reference Kittiwachana, Ferreira, Lloyd, Fido, Thompson, Escott and Brereton2010); Biometrics (Bergamini et al., Reference Bergamini, Koerich and Sabourin2009, Reference Bergamini, Oliveira, Koerich and Sabourin2008); Assistive Technologies (Yang et al., Reference Yang, Wang, Chen, Chen and Shi2010a; Khan et al., Reference Khan, Karg, Hoey and Kulic2012b); Time Series Analysis (Sachs et al., Reference Sachs, Thiel and Schwenker2006; Nguyen et al., Reference Nguyen, Li and Ng2011); Disease Detection (Cohen et al., Reference Cohen, Hilario, Sax, Hugonnet, Pellegrini and Geissbuhler2004; Zhang et al., Reference Zhang, Lu and Zhang2011); Medical Analysis (Zhou et al., Reference Zhou, Chan, Chong and Krishnan2005; Gardner et al., Reference Gardner, Krieger, Vachtsevanos and Litt2006); Bioinformatics (Spinosa & Ferreira de Carvalho, Reference Spinosa and Ferreira de Carvalho2004; Ferreira de Carvalho, Reference Ferreira de Carvalho2005; Alashwal et al., Reference Alashwal, Deris and Othman2006; Wang et al., Reference Wang, Ding, Meraz and Holbrook2006; Yousef et al., Reference Yousef, Jung, Showe and Showe2008); Steganalysis (Lyu & Farid, Reference Lyu and Farid2004; Rodriguez et al., Reference Rodriguez, Peterson and Agaian2007); Spam Detection (Schneider, Reference Schneider2004; Sun et al., Reference Sun, Tran, Duan and Zhang2005; Wu et al., Reference Wu, Cheng, Zhu and Wu2005); Audio Surveillance, Sound & Speaker Classification (Brew et al., Reference Brew, Grimaldi and Cunningham2007; Rabaoui et al., Reference Rabaoui, Davy, Rossignol, Lachiri and Ellouze2007, Reference Rabaoui, Davy, Rossignol and Ellouze2008); Ship Detection (Tang & Yang, Reference Tang and Yang2005); Vehicle Recognition (Munroe & Madden, Reference Munroe and Madden2005); Collision Detection (Quinlan et al., Reference Quinlan, Chalup and Middleton2003); Anomaly Detection (Nguyen, Reference Nguyen2002; Li et al., Reference Li, Huang, Tian and Xu2003; Tran et al., Reference Tran, Duan and Li2004; Yilmazel et al., Reference Yilmazel, Symonenko, Balasubramanian and Liddy2005; Perdisci et al., Reference Perdisci, Gu and Lee2006; Zhang et al., Reference Zhang, Zhang, Muthuraman and Jiang2007); Intrusion Detection (Evangelista et al., Reference Evangelista, Bonnisone, Embrechts and Szymanski2005; Giacinto et al., Reference Giacinto, Perdisci and Roli2005; Luo et al., Reference Luo, Ding, Pan, Ni and Hu2007); Credit Scoring (Kennedy et al., Reference Kennedy, Mac Namee and Delany2009); Yeast Regulation Prediction (Kowalczyk & Raskutti, Reference Kowalczyk and Raskutti2002); Customer Churn Detection (Zhao et al., Reference Zhao, Li, Li, Liu and Ren2005); Relevant Sentence Extraction (Kruengkrai & Jaruskulchai, Reference Kruengkrai and Jaruskulchai2003); Machine Vibration Analysis (Tax et al., Reference Tax, Ypma and Duin1999); Machine Fault Detection (Ercil & Buke, Reference Ercil and Buke2002; Tax & Duin, Reference Tax and Duin2004; Sarmiento et al., Reference Sarmiento, Hong and May2005; Shin et al., Reference Shin, Eom and Kim2005); and Recommendation Tasks (Yasutoshi, Reference Yasutoshi2006). Compression neural networks for OCC have been used to detect mineral deposits (Skabar, Reference Skabar2003) and for fMRI Analysis (Hardoon & Manevitz, Reference Hardoon and Manevitz2005a, Reference Hardoon and Manevitz2005b). One-class Fuzzy ART networks have been explored to classify cancerous cells (Murshed et al., Reference Murshed, Bortolozzi and Sabourin1996).
5 Conclusions and open research questions
The goal of OCC algorithms is to induce generalized classifiers when only one class (the target or positive class) is well characterized by the training data and the negative or outlier class is either absent, poorly sampled or the negative concept is not well defined. The limited availability of data makes the problem of OCC more challenging and interesting. The research in the field of OCC encompasses several research themes developed over time. In this paper, we have presented a unified view on the general problem of OCC and presented a taxonomy for the study of OCC problems. We have observed that the research carried out in OCC can be broadly represented by three different categories or areas of study, which depends upon the availability of training data, classification algorithms used and the application domain investigated. Based on the categories under the proposed taxonomy, we have presented a comprehensive literature survey of current state-of-the-art and significant research work in the field of OCC, discussing the techniques used and methodologies employed with a focus on their limitations, importance and applications.
Over the course of several years, new OCC algorithms have emerged and new application areas have been exploited. Although the OCC field is becoming mature, there are still several fundamental problems that are open for research, not only in describing and training classifiers, but also in scaling, controlling errors, handling outliers, using non-representative sets of negative examples, combining classifiers, generating sub-spaces, reducing dimensionality and making a fair comparison of errors with multi-class classification.
In the context of OCC, we believe that classifier ensemble methods need further exploration. Although there exist several bagging models, new techniques based on boosting and random subspace warrant further attention. Random subspace methods with one-class variants of decision trees and nearest neighbor classifiers can be an interesting research direction. The Random oracle Ensemble (Kuncheva & Rodrguez, Reference Kuncheva and Rodrguez2007) has been shown to fare better than standard ensembles for the multi-class classification problems; however, for OCC it has been not explored. We believe that carrying out research on new ensemble methods within the domain of OCC can bring interesting results.
Another point to note here is that in OSVMs, the kernels that have been used mostly are Linear, Polynomial, Gaussian or Sigmoidal. We suggest it would be fruitful to investigate some more innovative forms of kernels, for example, Genetic Kernels (Howley & Madden, Reference Howley and Madden2006) or domain specific kernels, such as Weighted Linear Spectral Kernel (Howley, Reference Howley2007), that have shown greater potential in standard SVM classification. Moreover, parameter tuning of standard kernels may give biased results, therefore we believe that researchers should focus on efficiently tuning and optimizing kernel parameters. The kernels used as distance metric have shown promising results in the basic form of one-class nearest neighbor classifiers. We believe further research in this direction can show interesting insights into the problem. An important issue that has been largely ignored by OCC researchers is how to handle missing data in the target class and still be able to develop robust one-class classifiers. This kind of scenario makes the OCC problem more difficult. Khan et al. (Reference Khan, Hoey and Lizotte2012a) address the issue of handling missing data in target class by using Bayesian Multiple Imputations (Rubin, Reference Rubin1987) and EM and propose several variants of one-class classifier ensemble that can perform better than traditional method of mean imputation. However, we recommend that research involving these and other advanced data imputation methods can help in building one-classifiers that can handle missingness in the data. Feature selection for one-class classifiers is a difficult problem because it is challenging to model the behavior of features for one class in terms of their discriminatory power. There are some studies in this direction (Villalba & Cunningham, Reference Villalba and Cunningham2007); however, a lack of advanced methods and techniques to handle high dimensional positive class data can still be a bottleneck in learning one-class classifiers.
In the case where abundant unlabeled examples and some positive examples are available, researchers have used many different two-step algorithms, as have been discussed in Section 4.3.1. We believe that a Bayesian Network approach to such OCC problems would be an interesting research area. When learning on only positive data using NB method, an important problem that hampers the flexibility of the model is the estimation of prior probabilities. An important research direction is to put in effort to estimate prior distribution with minimal user intervention. A possible direction in this attempt is to explore mixtures of beta distribution for inferring prior class probability (Calvo, Reference Calvo2008).
Normally OCC is employed to identify anomalies, outliers, unusual or unknown behaviors, and failing to identify such novel observations may be costly in terms of risks associated with health, safety and money. In general, most of the researchers assume equal cost of errors (false alarms and miss alarms), which may not be true in the case of OCC. However, traditional cost-sensitive learning methods (Ling & Sheng, Reference Ling and Sheng2010) may not fit here because neither the prior probability of the outlier class nor the associated cost of errors are known. Data-dependent approaches that deduce cost of errors from the training data objects may not generalize the cost across different domains of even same application area. In the papers we reviewed, only one research paper discusses the cost-sensitive aspect of OCC (Luo et al., Reference Luo, Ding, Pan, Ni and Hu2007) and it shows that this area of research is largely unexplored. We believe that approaches based on careful application of Preference Elicitation techniques (Chen & Pu, Reference Chen and Pu2004) can be useful to deduce cost of errors. In terms of data types, most of the research work in OCC is focused on numerical or continuous data, however not much emphasis is given to categorical or mixed data. Similarly, adaptation and development of OCC methods for streaming data analysis and online classification also need more research effort. Many of the OCC algorithms perform density estimation and assume that outliers are uniformly distributed in low density regions, however, if the target data also lies in low density region than such methods may start rejecting positive data objects or if the thresholds are increased than will start accepting outliers. To tackle such scenarios, alternate formulations of OCC is required.
In terms of applications of OCC, we have seen that it has been explored in many diverse fields with very encouraging results. With the emergence of Assistive Technologies to help people with medical conditions, OCC has a potential application to map patients’ individual behavior under different medical conditions, which would otherwise be very difficult to handle with multi-class classification approaches. Activity recognition is also a central problem in such domains. The data for these domains is normally captured by sensors that are prone to noise and may miss vital recordings. Multi-class classifiers are difficult to employ in these applications to detect unknown or anomalous behaviors, such as those related to the user/patient or the sensor itself. We believe OCC can play an important role in modeling these kinds of applications. In activity recognition and some computer vision problems, even the collected positive data may contain instances from negative class. Building binary classes on such unclean data is detrimental to the classification accuracy. We believe that employing OCC classifiers as a post-processing to filter out the noise from target data objects can be conducive to build better multi-class classifiers. Finally, we strongly recommend the development of open-source OCC software, tools and benchmark data sets that can be used by researchers to compare and validate results in coherent and systematic way.
This survey provides a unified and in-depth insight into the current study in the field of OCC. Depending upon the data availability, algorithm use and applications domain, appropriate OCC techniques can be applied and improved upon. We hope that the proposed taxonomy along with this survey will provide researchers with a direction to formulate future novel work in this field.
Acknowledgements
The authors are grateful to Dr D.M.J. Tax, Dr L. Manevitz, Dr K. Li, Dr H. Yu and Dr T. Onoda for their kind permission to reproduce figures from their respective papers.
