Introduction
The evolution of complex characters has been contested since the first formulation of the theory of evolution by natural selection by Darwin (Reference Darwin1859). In theory, the fossil record should allow direct assessment of the sequence of changes leading to the emergence of such traits, but because speciation may frequently occur in small, peripherally isolated populations that are rarely preserved but usually accompanied by rapid morphological change (Gould and Eldredge Reference Gould and Eldredge1977, Reference Gould and Eldredge1993; Kelley Reference Kelley1983; Spanbauer et al. Reference Spanbauer, Fritz and Baker2018), the fossil record often lacks the necessary resolution. A notable exception is the fossil record of marine plankton, such as planktonic foraminifera, which allows species’ transformations to be traced through time and in space with unparalleled continuity (Malmgren et al. Reference Malmgren, Berggren and Lohmann1983; Coxall et al. Reference Coxall, Wilson, Pearson and Sexton2007; Pearson and Ezard Reference Pearson and Ezard2014; Bicknell et al. Reference Bicknell, Collins, Crundwell, Hannah, Crampton and Campione2018).
An iconic example of gradual morphological transformation leading to the emergence of a complex character is the evolution of the spherical encompassing final chamber in the planktonic foraminifera Orbulina universa d'Orbigny, Reference d'Orbigny and de la Sagra1839, which is completely documented by a series of transitional forms leading from the ancestral Trilobatus (Spezzaferri et al. Reference Spezzaferri, Kučera, Pearson, Wade, Rappo, Poole, Morard and Stalder2015) through the intermediate Praeorbulina (Olsson Reference Olsson1964) to the descendant Orbulina (Blow Reference Blow1956; Jenkins Reference Jenkins1968; Pearson et al. Reference Pearson, Shackleton and Hall1997). This transition occurred in the open ocean, and the transitional forms emerged throughout the cosmopolitan warm-water habitat of the evolving lineage within a very short time, providing several key biostratigraphic data (Kennett and Srinivasan Reference Kennett and Srinivasan1983; Wade et al. Reference Wade, Pearson, Berggren and Pälike2011). The transition does not appear to be associated with a shift in the habitat of the evolving lineage (Pearson et al. Reference Pearson, Shackleton and Hall1997) and does not occur in association with any distinct global climatic event, making it difficult to speculate about the trigger for the emergence of the idiosyncratic shell form. However, a similar character evolved independently in an unrelated lineage of Paleogene foraminifera, culminating in the morphologically similar but substantially older Orbulinoides (Cordey Reference Cordey1968), implying that the spherical shape, minimizing the surface-to-volume ratio of the adult shell, may represent a response to a specific lifestyle or a morphological expression of a specific habitat among planktonic foraminifera.
Indeed, there is abundant morphological (Norris Reference Norris1991), genetic (Weiner et al. Reference Weiner, Weinkauf, Kurasawa, Darling and Kučera2015), and isotopic (Coxall et al. Reference Coxall, Wilson, Pearson and Sexton2007) evidence for parallel or repeated evolution of specific chamber shapes and shell elements in planktonic foraminifera. Notable examples are the iterative evolution of compressed chambers with a keel (Norris Reference Norris1991) or of digitate or radially elongated chambers (Coxall et al. Reference Coxall, Wilson, Pearson and Sexton2007; Weiner et al. Reference Weiner, Weinkauf, Kurasawa, Darling and Kučera2015). The prevalence of iterative evolution among planktonic foraminifera can be explained by the presence of strong constructional constraints, imposing functional limits on the geometric variability of shells constructed by sequential addition of interconnected chambers (Raup Reference Raup1966). Alternatively, the repeated evolution of similar traits may reflect phenotypic integration, resulting from the existence of a developmental and genetic network controlling the emergence of morphological traits in an organism (Pigliucci Reference Pigliucci2003). Functional and developmental integration may be both heritable and interconnected, jointly shaping (or rather channeling) the phenotypic landscape of an evolving clade (Müller and Wagner Reference Müller and Wagner1996).
In the case of the emergence of the spherical shell shape in planktonic foraminifera, it appears that the Paleogene Orbulinoides (Decima and Bolli Reference Decima and Bolli1970) and the Neogene Orbulina (Blow Reference Blow1956; Pearson et al. Reference Pearson, Shackleton and Hall1997) followed a similar sequence of steps during their evolution. However, it was only in Orbulina that the evolutionary trend culminated in the emergence of a complex character, involving at the same time the enlargement of the final chamber and the migration of the sutural apertures over the entire chamber surface in the form of areal apertures. This makes it difficult to speculate about the evolutionary mechanisms and potential drivers of the evolution of the complex character in Orbulina. However, next to these two well-known and globally distributed lineages, there also exists an additional case of the evolution of a spherical shell shape in planktonic foraminifera: the enigmatic Velapertina. The genus Velapertina is endemic to the Central Paratethys, where it appears to have repeated the same sequence of transitional steps as Orbulina, culminating in the acceleration of chamber growth rate combined with apertural displacements. The existence of a potential endemic form with shell morphology similar to the Orbulina lineage was first formally acknowledged by Łuczkowska (Reference Łuczkowska1955), who described these forms from the Miocene of the Carpathian Foredeep as Globigerinoides indigena. The independent origin of this lineage from the Orbulina lineage was highlighted by Popescu (Reference Popescu1969), who assigned this species to a new genus, Velapertina. Popescu (Reference Popescu1969) described two new species of the genus, but these appear to be extreme morphologies with aberrant (kummerform) final chambers and apertural bulla covering the sutural apertures, otherwise identical with Velapertina indigena. A fourth species, Velapertina sphaerica Popescu, Reference Popescu1987, has a morphology consistent with the Orbulina lineage. The origin of the idiosyncratic Velapertina remains unclear, but ever since its discovery, it has been reported only from Miocene deposits in the Paratethys.
Remarkably, the dating of the Miocene formations where the enigmatic Velapertina appears (NN6 Zone; e.g., Filipescu Reference Filipescu1996; Hohenegger et al. Reference Hohenegger, Ćorić and Wagreich2014) implies that the evolution of the final encompassing chamber in this lineage took place very shortly after the emergence of Orbulina (NN4 Zone). This coincidence cast doubts on the nature of Velapertina, because there are only a few well-documented cases of endemic evolution in planktonic foraminifera (e.g., Rögl Reference Rögl1994; Darling et al. Reference Darling, Kučera and Wade2007; Aurahs et al. Reference Aurahs, Grimm, Hemleben, Hemleben and Kučera2009; Huber et al. Reference Huber, Petrizzo and MacLeod2020), and because it proved difficult to establish by external morphology alone whether or not it represents a variant of Orbulina (Łuczkowska Reference Łuczkowska1971; Szczechura Reference Szczechura1984). Thus, the existence of Velapertina could so far not be used in arguments on evolutionary processes in planktonic foraminifera.
Here, we resolve the nature of Velapertina by revealing the interior shell architecture through X-ray computed tomography scanning of exceptionally well-preserved specimens and analysis of the full ontogenetic sequence from the first chamber (proloculus), through the juvenile, neanic, and adult stages (sensu Brummer et al. Reference Brummer, Hemleben and Spindler1987), leading to the development of its final encompassing chamber during the terminal stage. We compare the ontogenetic trajectory of Velapertina with Orbulina and constrain the habitat of the taxa by stable isotopic investigation of the shells and discuss the evolutionary implications of the resulting findings.
Materials and Methods
In order to constrain the spatiotemporal distribution of Velapertina throughout the Paratethys and to resolve the degree of its co-occurrence with the Orbulina lineage, we carried out an extensive literature review, compiling all localities where either lineage has been reported (Fig. 1, Supplementary Table 1). Only localities that provide sufficient stratigraphic constraints to resolve the occurrences to the level of planktonic foraminifera Subzone M5b (Praeorbulina glomerosa Lowest-occurrence Subzone), Zone M5 (Praeorbulina sicana Lowest-occurrence Zone), Zone M6 (Orbulina suturalis Lowest-occurrence Zone), and Zone M7 (Fohsella peripheroacuta Lowest-occurrence Zone) were considered (Wade et al. Reference Wade, Pearson, Berggren and Pälike2011). The search was carried out by querying the literature through Google Scholar, using combinations of taxonomic (Velapertina, Orbulina, Praeorbulina, indigena, suturalis, glomerosa, circularis) and geographic (Paratethys) keywords. The taxonomy has been harmonized across the papers to the genus level, and in each case the occurrence and biozone has been recorded. In all cases where Velapertina was recorded as co-occurring with one of the other taxa, we made sure that the co-occurrence was reported from within the same sample in the sediment sequences described in each paper. Next to the canonical Velapertina indigena Łuczkowska, Reference Łuczkowska1955, three more species of the genus have been formally described (Popescu Reference Popescu1969, Reference Popescu1973, Reference Popescu1987), but these have been so far only recorded from single localities, and in our opinion it remains questionable whether the described morphologies represent distinct taxa or extreme forms within a variable species.
Serravallian (A) and Langhian (B, C) occurrences of Velapertina indigena, Orbulina suturalis, and Praeorbulina glomerosa circularis within the Central Paratethys. The Central Paratethys during the middle Miocene covered the Pannonian Basin system surrounded by the Alps, Carpathians, and Dinarides in central Europe (D). Data used for the compilation of species distribution (D) were collected from the literature, with numbers referring to the references listed in Supplementary Table 1. The known occurrences and co-occurrences of the discussed species are shown for each time interval. The synthesis reveals that Velapertina and the Orbulina lineage were widespread throughout the middle Miocene Central Paratethys and that the representatives of the two lineages had overlapping distributions with well-documented co-occurrences. Abbreviations: AF, Alpine Foredeep; CWC, Central Western Carpathians; OWC, Outer Western Carpathians; NB, Novohrad-Nógrád Basin; SB, Styrian Basin; TCR, Transdanubian High; ?, assumed short-lived seaway. Paleogeographic reconstructions of the Paratethys were taken from Kováč et al. (Reference Kováč, Hudáčková, Halásová, Kováčová, Holcová, Oszczypko-Clowes, Báldi, Less, Nagymarosy, Ruman, Klučiar and Jamrich2017).
The terminal-stage morphology is similar between the genera Velapertina and Orbulina, with the spherical encompassing final chamber having multiple small areal apertures (Fig. 2). Thus, we decided to study their relatedness by reconstructing the ontogenetic trajectory preserved in the sequence of chambers preceding the terminal spherical chamber. Velapertina is endemic to the Paratethys (Łuczkowska 1971) and can be studied only using material from this realm. Thus, to resolve the relatedness of Velapertina and Orbulina, we concentrated on specimens of the Orbulina lineage from the Paratethys, assuming that these are representative of populations that could be the nearest relatives of Velapertina. In addition, we have also analyzed one specimen of Praeorbulina from the Pacific, to ensure the morphology of the Paratethyan specimens is representative for the lineage at large. In the Paratethys, we concentrated on three localities (Fig. 1) of middle Miocene age (Badenian stage in the regional Paratethyan stratigraphy; Kováč et al. Reference Kováč, Halásová, Hudáčková, Holcová, Hyžný, Jamrich and Ruman2018), representing the time shortly after the origin of both lineages and exhibiting the best preservation of planktonic foraminifera, making it likely that the initial whorls inside the spherical shells of the studied species are preserved and suitable for X-ray computed tomography scanning and 3D rendering.
X-ray computed tomography scanning of shell architecture of representative specimens of Praeorbulina glomerosa circularis, Orbulina suturalis, and Velapertina indigena from the Central Paratethys. Species are shown from different perspectives: A, spiral view of external morphology; B, spiral view of internal morphology; C, side view of internal morphology; and D, umbilical view of internal morphology. It appears that the three species have similar external shell morphology with spherical shell shape and multiple apertures, but the X-ray computed tomography scanning data reveal distinct growth patterns of achieving the final encompassing chamber in Orbulina and Velapertina lineages.
One well preserved O. suturalis specimen was obtained from a sample at 1303–1298 m in Modrany-1 well (47°50′58.5″N, 18°22′08.4″E, Locality 36 in Fig. 1) from the southeastern part of the Danube Basin (Slovak Republic), dated to the Zone M6 or NN5 Zone (Vlček et al. Reference Vlček, Hudáčková, Jamrich, Halásová, Franců, Nováková, Kováčová and Kováč2020). At this site, P. glomerosa circularis was rare and did not yield specimens suitable for X-ray computed tomography scanning. Further material was collected from an outcrop of Badenian (Langhian) clays also assigned to Zone M6 or NN5 Zone at Jevíčko (49°38′15.6″N, 16°41′13.3″E, Locality 12 in Fig. 1) in Moravia (Czech Republic) (Reuss Reference Reuss1854; Bubík Reference Bubík, Bubík, Ciurej and Kaminski2015). At this locality, one well-preserved specimen of P. gl. circularis and O. suturalis was taken for X-ray computed tomography scanning. The Pacific specimen of P. gl. circularis was selected from ODP Hole 872C, recovered in the vicinity of the Marshall Islands (Pacific Ocean). This sample is assignable to the middle Miocene Zone M5 or NN4 Zone, and the foraminifera were reported to be excellently preserved (Pearson Reference Pearson, Haggerty, Premoli, Rack and McNutt1995). Finally, well-preserved V. indigena specimens were retrieved from an outcrop at Chiuza (47°14′36.6″N, 24°14′51.8″E, Locality 41 in Fig. 1), located in the northern part of the Transylvanian Basin (Romania), dated to the NN6 Zone, which corresponds to Zone M7–Zone M9 (Fohsella fohsi Taxon-range Zone; Filipescu Reference Filipescu1996).
At localities Jevíčko and Chiuza and from the Modrany-1 core sample, about 200 g of sediment was collected. Samples were crushed into fragments of about 0.5 to 1 cm3 size, soaked in tap water, diluted in 3% hydrogen peroxide (H2O2) until fully disintegrated, and wet sieved over 63 μm and 150 μm mesh sieves. The residues were then dried at 40°C for 24 hours and split. Planktonic foraminifera were manually picked and identified from the >150 μm size fractions. The sample treatment of material obtained from Hole 872C, leg 144, is given by Pearson (Reference Pearson, Haggerty, Premoli, Rack and McNutt1995). Planktonic foraminifera taxonomy follows the concepts of Blow (Reference Blow1956), Łuczkowska (1971), and Pearson et al. (Reference Pearson, Shackleton and Hall1997). Initially, 80 individuals of O. suturalis were isolated from the dried residue from Modrany-1, 80 individuals of P. gl. circularis and of O. suturalis from Jevíčko, 80 individuals of P. gl. circularis from the ODP Hole 872C sample, and 80 individuals of V. indigena from Chiuza. These specimens were subsequently transferred to a petri dish filled with water to separate out tests that were not filled with sediment. Specimens with sediment-filled chambers sank to the bottom of the petri dish, while those with empty shell interiors remained floating. From among the presumably unfilled tests, we selected two individuals per species (four individuals for the morphologically more variable Velapertina) with particularly good preservation and well-developed terminal-stage morphology for X-ray computed tomography scanning.
The X-ray computed tomography scanning was performed with the SkyScan 1172 high-resolution micro-computed tomography device at the Natural Museum in Prague (Czech Republic). Tube voltage was set to 40 kV, and the current source was 250 μA. No filter was used. Random movement was set to 5. Data were acquired with an angle slope of 0.2° and 180° rotation. The acquired data were processed using flat-field correction and reconstructed by the supplied software NRecon (Bruker), which resulted in an isotropic voxel size of 0.54 μm for the <0.5 mm large specimens. Each X-ray computed tomography scan was visualized and morphometrically analyzed with the software Amira ZIBE edition v. 2019.04 (Stalling et al. Reference Stalling, Westerhoff, Hege, Hansen and Johnson2005; http://amira.zib.de). The shells were segmented into the sequential chambers, and any sediment remains within the chambers were manually removed with the Segmentation editor. The chambers were segmented by using the AmbientOcclusionField module and following the approach of Titschack et al. (Reference Titschack, Baum, Matsuyama, Boos, Färber, Kahl, Ehrig, Meinel, Soriano and Stock2018) and Baum and Titschack (Reference Baum and Titschack2016) (settings: number of rays: 156; ray length: ranging from 1 to 0.2 mm for every specimen and exceeding the cavity diameter in all other specimens). To separate the individual chambers within the shell, a DistanceMap of the intraspace was calculated as the basis for a CountourTreeSegmentation (persistence value: 0.05; see Titschack et al. Reference Titschack, Baum, Matsuyama, Boos, Färber, Kahl, Ehrig, Meinel, Soriano and Stock2018). The chamber separation was checked and manually corrected with the Segmentation editor. After this, the size extents (width, length, and height), volume, flatness, and elongation of the chambers, and the size extents (width, length, and height) and volume of the shell at different stages of growth were extracted with the ShapeAnalysis module, following Westin et al. (Reference Westin, Peled, Gudbjartsson, Kikinis and Jolesz1997). The segmentation revealed that in all of the scanned specimens of Orbulina and Praeorbulina, and one of the Velapertina specimens, the full series of chambers was preserved and could be resolved. To characterize their coiling geometry, we extracted the centroids of all chambers in these specimens. In addition, we were also able to resolve the coiling geometry in V. indigena specimen 2, where the preservation allowed us to determine the total number of the chambers and to identify the starting point of their spiral. We used the chamber centroids to calculate the growth parameters introduced by Raup (Reference Raup1966) and Caromel et al. (Reference Caromel, Schmidt and Rayfield2017): (1) translation rate of the whorl (T), (2) expansion rate of the whorl (W), (3) the generating curve with respect to the coiling axis modified by Caromel et al. (Reference Caromel, Schmidt and Rayfield2017) (D), and (4) the distance between the chamber's centroid from the coiling axis in an x,y plane (R). For each specimen, we also recorded the total number of chambers and the number of whorls (#W) in the trochospire (Table 1).
Morphological variables used in the cluster analysis (variables marked with an asterisk symbol) and nonmetric multidimensional scaling (Fig. 4).
We were able to characterize the pre-terminal morphology of all eight scanned specimens, including all four Velapertina specimens, where the earliest part of the chamber sequence of specimens 2, 3, and 4 was not preserved. Based on parameters extracted from only five chambers preceding the final chambers, we performed cluster analyses. In addition, by quantifying the shape of the chambers, the shape of the shell, the expansion rate of the chambers and the expansion rate of the shell for the five chambers before the final chamber (Table 1), we visualized the morphospace using nonmetric multidimensional scaling.
Exceptionally well-preserved specimens of planktonic foraminifera from Chiuza and Jevíčko were used for stable isotopic characterization of the habitat of the studied lineages. Despite a number of studies on the geochemistry of fossil planktonic foraminifera from the Central Paratethys (e.g., Báldi Reference Báldi2006; Kováčová et al. Reference Kováčová, Emmanuel, Hudáčková and Renard2009; Scheiner et al. Reference Scheiner, Holcová, Milovský and Kuhnert2018), the only analysis including Velapertina is the study by Durakiewicz et al. (Reference Durakiewicz, Gonera and Peryt1997) (Locality 6 in Fig. 1). This study indicates a shallow habitat for V. indigena, overlapping with co-occurring O. suturalis and Globigerinoides sp., but the study has been conducted in an interval affected by the occurrence of evaporites (Durakiewicz et al. Reference Durakiewicz, Gonera and Peryt1997), indicating that the oxygen isotopic composition of the local seawater may have been affected by isolation and evaporation, potentially biasing the oxygen isotopic results. Therefore, the stable isotopic habitat of the lineage relative to other planktonic foraminifera requires confirmation. The new measurements conducted here involved 15–20 specimens per species (approximately 100 μg), including individuals of P. gl. circularis, Globigerina bulloides, sinistrally and dextrally coiled Neogloboquadrina sp., and the benthic Hansenisca soldanii from Jevíčko, and V. indigena, Globigerina bulloides, Globoturborotalita sp., and Globigerinoides sp. from Chiuza. To account for the known size effect on stable isotopic composition of planktonic foraminifera (e.g., Ezard et al. Reference Ezard, Edgar and Hull2015), individuals of P. gl. circularis were further divided into small (<200 μm) and large (>200 μm) specimens, while due to the observed large intraspecific shell size variability, small (<200 μm), moderate (200–300 μm), and large (>300μm) individuals were separated for V. indigena. The stable oxygen and carbon isotopic composition of the picked foraminifera were measured at MARUM, University of Bremen (Germany), with a Finnigan MAT 251 gas isotope ratio mass spectrometer connected to a Kiel 1 automated carbonate preparation device. The instrument was calibrated against the in-house standard (ground Solnhofen limestone), which in turn was calibrated against the NBS 19 standard reference material. Over the measurement period, the standard deviations of the in-house standard were 0.04‰ for δ13C and 0.06‰ for δ18O. Data are reported in the delta-notation versus VPDB.
Results
Our synthesis of literature occurrences reveals that the Orbulina lineage and Velapertina lineage were widespread throughout the middle Miocene Central Paratethys (Fig. 1). Because most of the records derive from outcrops, which only cover a small part of the middle Miocene sedimentary record, it was not possible to reconstruct the temporal occurrence with a precision higher than foraminiferal Zone M5, Zone M6, and Zone M7 (Wade et al. Reference Wade, Pearson, Berggren and Pälike2011). At this resolution, the data synthesis indicates that Praeorbulina gl. circularis appeared in the Mediterranean region in the Langhian (Lirer et al. Reference Lirer, Foresi, Iaccarino, Salvatorini, Turco, Cosentino, Sierro and Caruso2019), while the earliest representatives of Praeorbulina are recorded in the Paratethys during the Langhian (M5 or NN4 Zone, early Badenian stage), shortly after the global emergence of this lineage in the uppermost Burdigalian (Zone M5; Wade et al. Reference Wade, Pearson, Berggren and Pälike2011). During the Langhian (M6 or base of NN4 Zone), we document the first occurrence of Orbulina suturalis and the co-occurrence of O. suturalis with P. gl. circularis in a number of places throughout the Central Paratethys. This shows that this region displays a similar species succession in the evolving lineage, as seen in the Mediterranean (Lirer et al. Reference Lirer, Foresi, Iaccarino, Salvatorini, Turco, Cosentino, Sierro and Caruso2019) and in the tropical world ocean (Wade et al. Reference Wade, Pearson, Berggren and Pälike2011).
Following the first appearance of Orbulina, Velapertina indigena evolved in the Central Paratethys in the Serravallian (M7 or NN6 Zone, late Badenian; Hohenegger et al. Reference Hohenegger, Ćorić and Wagreich2014; Kováč et al. Reference Kováč, Halásová, Hudáčková, Holcová, Hyžný, Jamrich and Ruman2018). We identified 17 Serravallian localities where Velapertina was found distributed throughout the Central Paratethys (Fig. 1). Of these, Velapertina co-occurred with Orbulina at 10 localities (co-occurrence implying the species were reported in the same sample), and there are only 9 localities, mainly in the Vienna Basin, where Orbulina has been reported but Velapertina has not. Within the stratigraphic resolution of our literature data synthesis, it is impossible to interpret whether the lack of Velapertina at some localities indicates an older age of those deposits. We can thus only conclude that at the given resolution of the Paratethyan stratigraphy, Orbulina and Velapertina had broadly overlapping distributions, with well-documented co-occurrences, but we cannot identify where in Paratethys Velapertina originated.
After establishing the biogeography and the pattern of co-occurrence of the two lineages in the Central Paratethys, we analyzed their shell geometry by X-ray computed tomography scanning. Five of the eight analyzed specimens showed well-preserved internal shell features with minimal sediment infill, allowing us to manually reconstruct the pattern of chamber addition from the proloculus. The Praeorbulina specimens had 15 and 16 chambers, the Orbulina specimens had 12 and 13 chambers, and one of the Velapertina specimens had 14 chambers (Figs. 2, 3). The initial whorl of the remaining Velapertina specimens proved to be damaged, with septae missing, and the shell architecture could therefore be reconstructed for specimen 2 only for the last 10 chambers and for specimens 3 and 4 for the last 8 chambers. The segmentation of the shell interior into the successive chambers reveals a pattern with rather constant and similar chamber growth rates throughout the ontogeny for all three taxa (Fig. 3A–C,E,F), with a conspicuous acceleration of growth rate for the final chamber occurring only in Praeorbulina and Orbulina. The average volume-based growth rate for the five successive chambers preceding the final chamber (forming an entire whorl and corresponding to the adult stage; sensu Brummer et al. Reference Brummer, Hemleben and Spindler1987) was in Praeorbulina, 122% and 126%; in Orbulina, 141% and 155%; and in Velapertina, 127%, 200%, 149%, and 139% (Fig. 3A). Whereas in Praeorbulina and Orbulina, the final chamber became more spherical (similar length and height; Fig. 3C,D), in Velapertina, the final chamber became conspicuously flatter, especially in specimens 2 and 4 (Fig. 3C,D).
Ontogenetic trajectories of Praeorbulina glomerosa circularis, Orbulina suturalis, and Velapertina indigena extracted from the X-ray computed tomography scanning data. Different colors and lines denote different specimens. The growth trajectories of the analyzed species are plotted backward from the final chamber to the proloculus: A, growth rate based on the chamber volume; B, growth rate based on the chamber size extents (length, width, and height); C, chamber length and height ratio; D, chamber flatness and elongation ratio; E, cumulative growth rate based on chamber size extents (length, width, and height); F, cumulative growth rate based on chamber volume. For the two incompletely resolved specimens of Velapertina, we assumed for the purpose of data visualization that they also had 14 chambers, but values of chamber shape and size are only shown for chambers that could be fully resolved. The growth trajectories of the analyzed species are indeed similar; however, the shape of the final chamber and the lack of growth rate acceleration for the final ultimate chamber in Velapertina indicate a different growth pattern from the Praeorbulina–Orbulina lineage.
The lack of growth acceleration toward the final chamber indicates that Velapertina must have achieved the spherical shell shape in a different manner than Orbulina and Praeorbulina. To assess the ontogenetic trajectory preceding the final chamber, we extracted the coordinates of the geometric centers of all chambers added before the final chamber and used these to describe the shape of the logarithmic spire. We used cluster analysis to visualize the similarity among the specimens. The outcome of this analysis shows higher similarity in the pre-adult ontogenetic trajectory and shell morphology between the two specimens of Praeorbulina, two specimens of Orbulina, and two specimens of Velapertina, indicating that the analysis likely captures a consistent aspect of the species’ pre-adult shell architecture. Next, the analysis reveals that the analyzed shells of P. gl. circularis and O. suturalis follow a more similar ontogeny, whereas the two specimens of V. indigena are different (Fig. 4A). To account for the large morphological variability in Velapertina, also indicated by the larger distance between the two specimens seen in the cluster analysis of the spiral growth parameters (Fig. 4A), we carried out nonmetric multidimensional scaling to visualize the morphospace (Fig. 4B). The results confirm that Velapertina is more variable, but indicate that all four Velapertina specimens differ from Praeorbulina and Orbulina. Thus, both the analysis of the full ontogenetic trajectory (Fig. 4A) and the analysis of the five penultimate chambers (Fig. 4B) suggest that the similar adult shell shape with encompassing final chamber in Velapertina and in the Orbulina lineage conceals a morphologically different pre-adult ontogenetic trajectory.
Cluster analysis (based on Euclidean distance and paired group clustering algorithm) of 11 variables describing shell coiling and architecture of two specimens of each of the three analyzed species (A) and a nonmetric multidimensional scaling (based on Euclidean distance) visualization of morphospace occupation including two additional Velapertina specimens (B). The analysis in B is based on parameters describing the ontogeny of chamber and shell shape and volume expansion determined from X-ray computed tomography scanning data of the five chambers added before the final chamber. All analyzed variables are listed in Table 1. The analysis indicates that the convergent adult shape of Velapertina indigena is the result of a different ontogenetic sequence than in the Praeorbulina–Orbulina lineage.
After analyzing the shell architecture of the two lineages, we constrained the habitat of the lineages by comparing new stable isotopic analyses of their shells from Jevíčko and Chiuza with data from Durakiewicz et al. (Reference Durakiewicz, Gonera and Peryt1997). Our results at Jevíčko revealed a δ18O offset of up to 1.5‰ between planktonic and benthic taxa. The benthic fauna at this site is represented by Hansenisca soldanii, which reveals the most positive (i.e., “coldest”) δ18O signature. Among the analyzed planktonic taxa, the specimens from the Praeorbulina–Orbulina and Velapertina lineages show more positive (i.e., “colder and thus deeper”) δ18O values, but these species have a greater enrichment of δ13C as an indicator of the presence of symbionts (Birch et al. Reference Birch, Coxall, Pearson, Kroon and O'Regan2013; Fig. 5A). The Chiuza site, the best locality in terms of shell preservation of V. indigena, lacks benthic foraminifera, but the overlap in the δ18O values among all of the analyzed planktonic species indicates that they likely all inhabited essentially the same surface layer. Here, we also found a conspicuous δ13C enrichment in V. indigena, especially among the larger specimens, which is of a similar magnitude as in the co-occurring Globigerinoides sp. These results are congruent with the earlier study by Durakiewicz et al. (Reference Durakiewicz, Gonera and Peryt1997), who recorded a similar δ13C enrichment in V. indigena, which is thus isotopically similar to O. suturalis and Globigerinoides sp. Nevertheless, those authors recorded overall more positive δ18O values (Fig. 5B), which may reflect the more northerly location of their material or an isotopic enrichment due to evaporation, as evidenced by the presence of evaporites in their section. Collectively, these results indicate that V. indigena likely possessed symbionts, and its stable isotopic habitat cannot be distinguished from that of the Orbulina lineage.
Habitat reconstruction of Velapertina relative to other planktonic foraminifera species based on δ13C and δ18O isotopes from (A) new measurements and (B) data from Durakiewicz et al. (Reference Durakiewicz, Gonera and Peryt1997).
Discussion
Even though the external shell morphologies of the Orbulina lineage and Velapertina indigena are similar (Fig. 2), with spherical shell shape and sutural and areal apertures, the X-ray computed tomography scanning data highlight a different internal shell architecture and a distinct growth pattern in Velapertina (Figs. 3, 4, 6). The high degree of overlap between the successive chambers and the negligible growth rate acceleration for the final chamber found in Velapertina (Fig. 3A,B,E,F) indicate that this form achieved its terminal spherical shell morphology by progressively more overlapping chambers of similar size, whereas in Orbulina, the spherical shell emerges only in the final growth stage as a result of massive growth acceleration of the final chamber that envelops the entire shell (Fig. 6).
X-ray computed tomography scanning reconstructions visualizing the shell ontogeny of all analyzed specimens by holding the external shell transparent. Specimens are labeled as in Fig. 4B. The successive positions of chamber centroids are shown in the top row specimens to visualize the shape of the logarithmic spiral from which the Raupian parameters shown next to the analyzed specimens have been extracted. This comparison show that the Velapertina has more overlapping chambers of similar size with chamber centroids disposed near to the coiling axes, whereas in Praeorbulina and Orbulina, the coiling is more evolute with a lower degree of overlap between the successive chambers that occupy more whorls and are disposed far from the coiling axes. The Raupian parameters of the logarithmic spiral (Raup Reference Raup1966) are provided for each specimen.
Indeed, next to the lack of growth acceleration, the final chamber in Velapertina is less globular (Fig. 3C,D) and does not completely encompass the earlier parts of the shell, as is the case in Praeorbulina and Orbulina (Figs. 2, 6). Instead, the analyzed individuals of Velapertina bear consistent differences in shell architecture before the development of the final chamber (Fig. 4), implying that their pre-adult morphology is not consistent with that of Praeorbulina and Orbulina. In other words, the final chamber is not required to differentiate between the two lineages, because Velapertina is characterized by more overlap between the successive chambers, with centroids localized closer to the coiling axis (R = 87.36), throughout the early ontogeny, whereas in Praeorbulina–Orbulina, the pre-adult part of the shell reveals a more loosely coiled and more evolute growth geometry with less overlap between successive chambers, occupying more whorls and with chamber centroids disposed far from the coiling axes (R = 121.28; Fig. 6). Thus, next to the Paleogene Orbulinoides (Cordey Reference Cordey1968), the Neogene Orbulina (d’Orbigny Reference d'Orbigny and de la Sagra1839), and Globigerinatella (Cushman and Stainforth Reference Cushman and Stainforth1945), Velapertina very likely represents the fourth example of the evolution of spherical shell shape among planktonic foraminifera. However, unlike the three other examples, in the case of Velapertina, the ancestor remains unclear. Sediment layers recording transitional forms leading to Velapertina have not yet been described, which likely indicates rapid speciation within a geographically limited population, akin to the concept of punctuated equilibria (Gould and Eldredge Reference Gould and Eldredge1977, Reference Gould and Eldredge1993). On the other hand, the ancestor ought to be sourced from within the globigerinid taxa that were present in the Paratethys Sea before the emergence of Velapertina. Although the emergence of supplementary apertures in planktonic foraminifera also occurred in parallel many times (Wade et al. Reference Wade, Olsson, Pearson, Huber and Berggren2018), it appears more parsimonious to speculate that this trait would have already been present in the ancestor, as was the case in the emergence of the Orbulina lineage (Blow Reference Blow1956; Jenkins Reference Jenkins1968; Pearson et al. Reference Pearson, Shackleton and Hall1997). This would imply an ancestry of Velapertina in either the Trilobatus or Globigerinoides lineages, which were both present in the Paratethys and possess supplementary apertures. In our opinion, there is no way to pinpoint the ancestor any closer at this time, because the only remaining character, shell wall texture, is inconclusive. Therefore, in the absence of knowledge of the exact ancestor of Velapertina, we retain the classification of the lineage in a separate genus.
The existence of a fourth independent case of the evolution of spherical shell shape in planktonic foraminifera, in Velapertina, allows us to assess the degree of developmental integration during the emergence of this character. When evolution is directed toward spherical shell geometry, the foraminifera are “faced” with the problem of retaining communication with the exterior through an aperture without compromising the spherical shape. The morphological transitions in Orbulinoides, Orbulina, and Globigerinatella exhibit a trend, where from a certain point along the transition toward a spherical shell, the large primary aperture transforms into a series of small sutural apertures. Remarkably, the same is observed in Velapertina, indicating that this may be the only solution available because of constructional constraints (Raup Reference Raup1966) during the morphogenesis of subsequent chambers. In Orbulina and Globigerinatella, where the terminal chamber encompasses the entire shell, this sequence progressed further, whereby next to the sutural apertures multiple areal apertures appeared throughout the final chamber (Blow Reference Blow1956). The Paratethyan Velapertina appears to have followed the same path of transformation; because the terminal chamber is not completely encompassing, there are still many sutural apertures, but it also possessed the first clearly identifiable areal apertures appearing in the final chamber (Popescu Reference Popescu1976; see also Fig. 2). This indicates a consistent connection between shell architecture and aperture types during the evolution of a spherical shell, with the emergence of areal apertures as the prerequisite for maintaining the trophic behavior of the evolving lineage while possessing a spherical shell shape.
The independent origin of spherical shells in V. indigena implies that the similar morphological traits of Velapertina and Orbulina are the result of parallel evolution, a common phenomenon in the history of planktonic foraminifera (Norris Reference Norris1991; Coxall et al. Reference Coxall, Wilson, Pearson and Sexton2007; Weiner et al. Reference Weiner, Weinkauf, Kurasawa, Darling and Kučera2015). Coxall et al. (Reference Coxall, Wilson, Pearson and Sexton2007) documented the emergence of digitate chambers and concluded that there must have been an environmental driver associated with life in a deeper environment that favored this chamber morphology. Our stable isotopic analysis of V. indigena indicates essentially the same habitat and presence of symbionts as in the coexisting Orbulina lineage and the likely ancestral Globigerinoides or Trilobatus (Pearson et al. Reference Pearson, Shackleton and Hall1997; Fig. 5). This in line with previous observations reporting no depth parapatry in the evolution of Orbulina (Pearson et al. Reference Pearson, Shackleton and Hall1997) and implies that the emergence of the spherical shell shape was not associated with a change in depth habitat. On the other hand, the independent evolution of the same trait in a coexisting lineage in the Central Paratethys indicates that there likely was a strong functional advantage of this shape at that time. This prompts the question of why the spherical shell shape is so advantageous for planktonic foraminifera? As already recognized by Pearson et al. (Reference Pearson, Shackleton and Hall1997), a spherical shell shape creates the minimum possible surface-to-volume ratio. Surface-to-volume ratio is an important parameter for cell physiology, determining the rate of key processes like gas exchange. Minimizing this ratio implies a lifestyle where gas exchange is not limiting (no oxygen depletion; Burke et al. Reference Burke, Renema, Henehan, Elder, Davis, Maas, Foster, Schiebel and Hull2018), and its potential advantage could be that the spherical shell shape requires the least amount of material to achieve the maximum volume.
Having established that Velapertina evolved independently from Orbulina, it also has to be accepted that this peculiar form was endemic throughout its existence to the semi-isolated system of partly interconnected basins of the Central Paratethys (Fig. 1). The middle Miocene planktonic foraminifera composition in this complex marine realm was affected by tectonics and sea-level changes, creating marine gateways that facilitated population exchange between the Mediterranean and the Paratethys. The most prominent gateway during the Langhian was the Trans-Tethyan Trench Corridor, east of the Alps, which remained open until the Serravallian (Rögl Reference Rögl1998; Kováč et al. Reference Kováč, Andreyeva-Grigorovich, Bajraktarević, Brzobohatý, Filipescu, Fodor, Harzhauser, Oszczypko, Pavelić, Rögl, Saftić, Sliva and Studencka2007, Reference Kováč, Hudáčková, Halásová, Kováčová, Holcová, Oszczypko-Clowes, Báldi, Less, Nagymarosy, Ruman, Klučiar and Jamrich2017; Fig. 1). The timing of its restriction appears to coincide with the emergence of Velapertina, and because Velapertina has never been reported outside the Central Paratethys, the speciation of Velapertina likely took place in the then semi-isolated Central Paratethys. Here, the species clearly evolved in the presence of the Orbulina lineage, with which it co-occurred throughout the Central Paratethys (Fig. 1) and with which it shared its habitat (Fig. 5). It is unclear from the stratigraphic resolution of our data if V. indigena evolved in the absence of Orbulina in some limited basins of the Paratethys, but certainly Velapertina co-occurred with Orbulina shortly after its emergence (Fig. 1). Assessing the spatial and temporal origin of Velapertina would require more detailed stratigraphic analysis of the basins where the co-occurrence of the two lineages is documented. However, likely because of the restricted connection of the Central Paratethys in the Serravallian, the endemic Velapertina never succeeded in invading the world ocean or the Mediterranean. Like all other planktonic foraminifera inhabiting the Paratethyan basins, it fell victim to the ongoing environmental transformation due to further restriction of the Central Paratethys, culminating in the Tortonian with the Pannonian Lake (Kováč et al. Reference Kováč, Andreyeva-Grigorovich, Bajraktarević, Brzobohatý, Filipescu, Fodor, Harzhauser, Oszczypko, Pavelić, Rögl, Saftić, Sliva and Studencka2007, Reference Kováč, Hudáčková, Halásová, Kováčová, Holcová, Oszczypko-Clowes, Báldi, Less, Nagymarosy, Ruman, Klučiar and Jamrich2017).
The isolated nature of the Paratethys, and frequent changes in the regional paleogeography (Fig. 1) very likely affected the nature of the regional water-column stratification. We note that changes in stratification have been considered important drivers of size disparity (Schmidt et al. Reference Schmidt, Renaud, Bollmann, Schiebel and Thierstein2004) as well as diversity (Lowery et al. Reference Lowery, Bown, Fraass and Hull2020) of planktonic foraminifera, and we speculate that it may have been this aspect of the regional environment that led to the emergence as well as the extinction of Velapertina.
As a result of its peculiar biogeography, Velapertina is one of only a few species of planktonic foraminifera with a known place of origin and an endemic distribution. Unlike the bipolar or Indopacific–Atlantic isolation known for some cryptic (Darling et al. Reference Darling, Kučera, Wade, Langen and Pak2003, Reference Darling, Kučera and Wade2007; Morard et al. Reference Morard, Quillevere, Douady, de Vargas, de Garidel-Thoron and Escarguel2011, Reference Morard, Fullberg, Brummer, Greco, Jonkers, Wizemann, Weiner, Darling, Siccha, Ledevin, Kitazato, de Garidel-Thoron, de Vargas and Kučera2019; Quillévéré et al. Reference Quillévéré, Morard, Escarguel, Douady, Ujiié, de Garidel-Thoron and de Vargas2013; Weiner et al. Reference Weiner, Weinkauf, Kurasawa, Darling and Kučera2015) or even morphologically distinguishable species (Lazarus et al. Reference Lazarus, Hilbrecht, Spencer-Cervato and Thierstein1995; Kučera and Kennett Reference Kučera and Kennett2000), the distribution area of Velapertina was strikingly small and restricted. It is possible that this unusual degree of restriction facilitated speciation among the enclosed foraminifera, as evidenced by the existence of other endemic species that appear restricted to the Paratethys (Rögl Reference Rögl1994).
Conclusions
The evolution of the spherical shell shape of Orbulina universa is a textbook example of the emergence of a complex character documented by a series of transitional steps, combining chamber growth rate and aperture modifications. Here we show that shortly after the emergence of Orbulina, the enigmatic lineage of Velapertina from the Central Paratethys iterated the same steps of morphological integrations toward spherical shell shape. Through detailed X-ray computed tomography scanning analyses of Praeorbulina glomerosa circularis, Orbulina suturalis, and Velapertina indigena, we revealed a consistent difference in the adult and pre-adult growth patterns of the two lineages, indicating that the Velapertina lineage had a different origin. This indicates that the final spherical morphology with areal apertures in V. indigena results from parallel evolution with the Orbulina lineage. Because of increasing restriction of the biogeographic province, Velapertina remained endemic to the Paratethys throughout its short existence. The fact that it evolved shortly after Orbulina and shared the same habitat indicates a common environmental driver favoring spherical shells in planktonic foraminifera, implying that this complex character evolved in response to a specific environmental stimulus, such as the emergence of a specific habitat.
Acknowledgments
We would like to thank the editor and two anonymous reviewers for their constructive comments on earlier versions of this article. We thank K. Holcová for valuable discussions, M. J. Sabo for proofreading the manuscript, and S. Filipescu for providing material from Chiuza (Romania). The present study used a sample obtained during the Ocean Drilling Program (Leg 144). P.K. was supported by the Collegium Talentum Programme of Hungary, the Slovak Research and Development Agency under the contracts APVV-20-0079 and APVV 17-0555, the Grants for Young Scientists of the Comenius University in Bratislava (UK/214/2019), the German Academic Exchange Service (DAAD) Research Grant for Doctoral Candidates and Young Academic Scientists, the German Academic Exchange Service (DAAD) STIBET Scholarship, the National Scholarship Programme of the Slovak Republic, and the Erasmus+ Programme of the European Commission. We also acknowledge funding through the Cluster of Excellence “The Ocean Floor—Earth's Uncharted Interface.”
Declaration of Competing Interests
The authors declare no competing interests.
Data Availability Statement
Supplementary Table 1 is available from the Dryad Digital Repository: https://doi.org/10.5061/dryad.7d7wm37zr. Planktonic foraminifera data and the X-ray computed tomography scanning data are available online at PANGAEA Data Publisher: https://doi.org/10.1594/PANGAEA.952343.
Open access
