In recent years, the aviation industry has taken a leading role in the integration of composite structures to develop lighter and more fuel efficient aircraft. Among the leading concepts to achieve this goal is the Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) concept. The focus of most PRSEUS studies has been on developing an hybrid wing body structure, with only a few discussing the application of PRSEUS to a tube-wing fuselage structure. Additionally, the majority of investigations for PRSEUS have focused on experimental validation of anticipated benefits rather than developing a methodology to capture the behavior of stitched structure analytically. This paper presents an overview of a numerical methodology capable of accurately describing PRSEUS’ construction and how it may be implemented in a barrel fuselage platform resorting to high-fidelity mesoscale modeling techniques. The methodology benefits from fresh user defined strategies developed in a commercially available finite element analysis environment. It further proposes a new approach for improving the ability to predict deformation in stitched composites, allowing for a better understanding of the intricate behavior and subtleties of stitched aerospace structures.

This paper deals with the study of the power matching of the propulsion system and on-board systems changing the on-board systems’ electrification level. In particular, four system architectures have been studied, each one with a different level of electrification starting from the More Electric Aircraft (MEA) to the All Electric Aircraft (AEA) systems. The mass and the power requirement of each system architectures have been analysed together with the change in engine specific fuel consumption. Then, these results have been used to quantify the influences of engine and systems power matching to the entire aircraft. In particular, the beneficial effect of system electrification has been evaluated as an increment of aircraft range. Moreover, two reference aircraft – a regional jet and a short/medium range liner – have been selected to understand the variance of the power matching changing aircraft dimensions and mission range. The study is carried out using a distributed and collaborative Multi-Disciplinary Design Analysis and Optimization (MDAO) environment. The results show a beneficial effect of systems electrification on systems mass and engine specific fuel consumption. At aircraft level, the results point out an increment of aircraft range up to 7.7% with a different trend for the two studied cases.

Along many flight corridors, bodies of water serve as preferred emergency landing options. Thus, relevant scenarios must be investigated to improve aircraft crashworthiness in the event of an impact landing on water. Enhancing the damage tolerance of aircraft structures through repetitive experiments can, however, prove highly uneconomical. Such large-scale trials can be influenced by many factors of uncertainty adversely affecting the quality of the results. Therefore, the work presented in this study focuses in particular on evaluating a computational methodology perfected for aircraft water ditching using Coupled Lagrangian-Eulerian (CLE) that allows detailed prediction of structural response of a verified deformable fuselage section during such events. Validation of the fluid-structure interactive (FSI) strategy developed is conducted, thoroughly comparing the method against the analytical and experimental results of multiple wedge drop tests. Finally, the validated FSI strategy is applied to a high-fidelity fuselage section model impacting water to simulate and assess a realistic ditching scenario.

Aircraft handling qualities may be influenced by wing-tip flow separations and horizontal tail (HT) reduced efficiency caused by loss of local dynamic pressure or local tailplane flow separations in high angle-of-attack manoeuvres. From the flight tester’s perspective, provided that the test aircraft presents sufficient longitudinal control authority to overcome an uncommanded nose-up motion, this characteristic should not be a safety factor. Monitoring and measuring the local airflow in the aircraft’s HT provides information for safe flight-test envelope expansion and data for early aerodynamic knowledge and model validation. This work presents the development, installation and pre-flight calibration using computational fluid dynamics (CFD), flight-test calibration, results and benefits of differential pressure based local angle-of-attack and total pressure measurements through 20 static pressure ports and a Kiel pitot. These sensors were installed in a single-aisle, four-abreast, full fly-by-wire medium-range jet airliner with twin turbofan engines and conventional HT (low vertical position).

Pilot briefings, in their traditional form, drown pilots in a sea of information. Rather than unfocused swathes of air traffic management (ATM) information, pilots require only the information for their specific flight, preferably with an emphasis on the most important information. In this paper, we introduce the notion of ATM information cubes – in analogy to the well-established concept of Online analytical processing (OLAP) cubes in data warehousing. We propose a framework with merge and abstraction operations for the combination and summarization of the information in ATM information cubes to obtain management summaries of relevant information. To this end, we adopt the concept of semantic data container – a package of data items with a semantic description of the contents. The semantic descriptions then serve to hierarchically organise semantic containers along the dimensions of an ATM information cube. Leveraging this hierarchical organisation, a merge operation combines ATM information from individual semantic containers and collects the data items into composite containers. An abstraction operation summarises the data items within a semantic container, replacing individual data items with more abstract data items with summary information.

This paper addresses a methodology to parametrically size thermal control subsystems for high-speed transportation systems during the conceptual design phase. This methodology should be sufficiently general to be exploited for the derivation of Estimation Relationships (ERs) for geometrically sizing characteristics as well as mass, volume and power budgets both for active (turbopumps, turbines and compressors) and passive components (heat exchangers, tanks and pipes). Following this approach, ad-hoc semi-empirical models relating the geometrical sizing, mass, volume and power features of each component to the operating conditions have been derived. As a specific case, a semi-empirical parametric model for turbopumps sizing is derived. In addition, the Thermal and Energy Management Subsystem (TEMS) for the LAPCAT MR2 vehicle is used as an example of a highly integrated multifunctional subsystem. The TEMS is based on the exploitation of liquid hydrogen boil-off in the cryogenic tanks generated by the heat load penetrating the aeroshell throughout the point-to-point hypersonic mission. Eventually, specific comments about the results will be provided together with suggestions for future improvements.

Product development, especially in aerospace, has become more and more interconnected with its operational environment. In a constant changing world, the operational environment will be subjected to changes during the life cycle of the product. The operational environment will be affected by not only technical and non-technical perturbations, but also economical, managerial and regulatory decisions, thus requiring a more global product development approach. One way to try tackling such complex and intertwined problem advocates studying the envisioned product or system in the context of system of systems (SoS) engineering. SoSs are all around us, probably in any field of engineering, ranging from integrated transport systems, public infrastructure systems to modern homes equipped with sensors and smart appliances; from cities filling with autonomous vehicle to defence systems.

Since also aerospace systems are certainly affected, this work will present a holistic approach to aerospace product development that tries spanning from needs to technology assessment. The proposed approach will be presented and analysed and key enablers and future research directions will be highlighted from an interdisciplinary point of view. Consideration of the surrounding world will require to look beyond classical engineering disciplines.

The increasing environmental requirements in the air transport sector pose great challenges to the aviation industry and are key drivers for innovation. Besides various approaches for increasing the efficiency of conventional gas turbine engines, electric propulsion systems have moved into the focus of aviation research. The first electric concepts are already in service in general aviation. This study analyses the potentials of electric and turbo hybrid propulsion systems for commercial aviation. Its purpose is to compare various architectures of electrical powertrains with a conventional turboprop on a regional aircraft, similar to the ATR 72, on engine and flight mission levels. The considered architectures include a turbo-electric (power controlled and direct driven), hybrid-electric (serial and parallel) and a pure electric concept. Their system weights are determined using today’s technology assumptions. With the help of performance models and flight mission calculations the impact on fuel consumption, CO${}_{2}$ emissions and aircraft performance is evaluated.

One of the challenges of modern engineering design is the amount of data that designers must keep track while performing system analysis and synthesis. This task is particularly important in the design process of complex systems such as novel aerospace systems where Modeling and Simulation play an essential role. The Agile philosophy stems from the field of Software Engineering and describes an approach to development in which requirements and solutions gradually develop through collaboration between self-organising cross-functional teams and end users. Agile Model-Based System Engineering (AMBSE) is the application of the Agile philosophy to Model-Based System Engineering. In this paper, AMBSE is accomplished through the application of the Object-Oriented System Engineering Method (OOSEM). OOSEM employs a top-down scenario-driven process that adopts System Modeling Language (SysML) and leverages the object-oriented paradigm to support the analysis, specification, design, and verification of systems. AMBSE assisted by mathematical modelling and safety assessment techniques is applied to the first design iterations of the main aircraft systems, allowing a comprehensive design exploration. The flight control system was chosen to illustrate the procedure in detail, emphasising the synthesis of a six-degrees-of-freedom model augmented by dynamic inversion control for a hypothetical supersonic transport aircraft satisfying class II MIL-F-8785C handling qualities. It is concluded that AMBSE presents promising properties to support future aircraft development within the current regulatory framework for aircraft design, while enabling a smooth transition from conceptual to preliminary design.

The persistent coverage control problem is formulated based on cell discretisation of two-dimensional mission space and time-increasing cell ages. A new performance function is defined to represent the coverage level of the mission space, and time behaviour is evaluated by the probabilistic method based on the detection model of agents. For comparison, persistent coverage controllers are designed by a target-based approach and a reactive approach. Both controllers are designed in a distributed manner using Voronoi tessellation and Delaunay graph-based local information sharing. Numerical simulation is performed to analyse the evaluated mean age of cells and evaluated coverage level over time for the designed persistent coverage controllers. The differences between the evaluation model and simulation situation are discussed.

The field data characterising aircraft accidental in-service damage was collected, sorted and processed. By means of probabilistic analysis, the wing damageability statistical parameters were determined. The scenarios of wing accidental impacts were described and the qualitative distribution of impact intensity over the wing surfaces was obtained. By means of original analytical method, the metal dent depth data were converted into impact energy data and energy probabilistic distributions were established. It was shown that the functional relationships generated on domestic data are generally consistent with similar foreign results obtained on other types of aircraft with serious differences in operating conditions. Along with realistic impact damage scenarios, the high energy impact events were considered. It was noted that in some cases severe damage events should not be addressed as extremely improbable and should be included into design and certification process.

The need for efficient propulsion systems allied to increasingly more challenging fixed-wing UAV mission requirements has led to recent research on the autonomous thermal soaring field with promising results. As part of that effort, the feasibility and advantages of model predictive control (MPC)-based guidance and control algorithms capable of extracting energy from natural occurring updrafts have already been demonstrated numerically. However, given the nature of the dominant atmospheric phenomena and the amplitude of the required manoeuvres, a non-linear optimal control problem results. Depending on the adopted prediction horizon length, it may be of large order, leading to implementation and real-time operation difficulties. Knowing that, an alternative MPC-based autonomous thermal soaring controller is presented herein. It is designed to yield a simple and small non-linear programming problem to be solved online. In order to accomplish that, linear prediction schemes are employed to impose the differential constraints, thus no extra variables are added to the problem and only linear bound restrictions result. For capturing the governing non-linear effects during the climb phase, a simplified representation of the aircraft kinematics with quasi-steady corrections is used by the controller internal model. Flight simulation results using a 3 degree-of-freedom model subjected to a randomly generated time varying thermal environment show that the aircraft is able to locate and exploit updrafts, suggesting that the proposed algorithm is a feasible MPC strategy to be employed in a practical application.

Within the present publication, the rotor head of a compound helicopter known as Rapid And Cost-Effective Rotorcraft (RACER) is investigated. In particular, the aerodynamic design optimisation of the RACER blade-sleeve fairings (BSFs) is conducted. For this purpose, an isolated rotor head is generated featuring a full-fairing beanie, the BSF and a truncated rotor blade (RB). Moreover, a single RB is investigated at two different azimuthal rotor positions, which correspond to the advancing and the retreating RB case. For this purpose, an averaged circumferential velocity is determined in the blade-sleeve region and superposed with the RACER cruise speed in order to estimate the prevailing flow conditions. The automated aerodynamic design optimisation is performed by means of a previously developed optimisation tool chain. A global multi-objective genetic optimisation algorithm is applied for the given problem. During preliminary work, a 2D aerodynamic design optimisation of selected blade-sleeve sections was conducted. These optimised aerofoils represent the design variables for the current optimisation problem. The shape modification of the 3D fairing is realised by exchanging specific aerofoils at certain spanwise sections.

Previous studies demonstrated that laminar separation bubbles (LSBs) in the absence of external disturbances or forcing are intrinsically unstable with respect to a three-dimensional instability of centrifugal nature. This instability produces topological modifications of the recirculation region with the introduction of streamwise vorticity in an otherwise purely two-dimensional time-averaged flows. Concurrently, the existence of spanwise inhomogeneities in LSBs have been reported in experiments in which the amplification of convective instability waves dominates the physics. The co-existence of the two instability mechanisms is investigated herein by means of three-dimensional parabolised stability equations. The spanwise waviness of the LSB on account of the primary instability is found to modify the amplification of incoming disturbance waves in the linear regime, resulting in a remarkable enhancement of the amplitude growth and a three-dimensional arrangement of the disturbance waves in the aft portion of the bubble. Present findings suggest that the oblique transition scenario should be expected in LSBs dominated by the convective instability, unless high-amplitude disturbances are imposed.