Book contents
- Frontmatter
- Contents
- Preface
- 1 Fundamentals of laser energy absorption
- 2 Lasers and optics
- 3 Thermal processes in laser–materials interactions
- 4 Desorption at low laser energy densities
- 5 Dynamics of laser ablation
- 6 Ultrafast-laser interactions with materials
- 7 Laser processing of thin semiconductor films
- 8 Laser-induced surface modification
- 9 Laser processing of organic materials
- 10 Pulsed-laser interaction with liquids
- 11 Laser cleaning of particulate contaminants
- 12 Laser interactions with nanoparticles
- 13 Laser-assisted microprocessing
- 14 Nano-structuring using pulsed laser radiation
- Index
- References
5 - Dynamics of laser ablation
Published online by Cambridge University Press: 04 December 2009
Book contents
- Frontmatter
- Contents
- Preface
- 1 Fundamentals of laser energy absorption
- 2 Lasers and optics
- 3 Thermal processes in laser–materials interactions
- 4 Desorption at low laser energy densities
- 5 Dynamics of laser ablation
- 6 Ultrafast-laser interactions with materials
- 7 Laser processing of thin semiconductor films
- 8 Laser-induced surface modification
- 9 Laser processing of organic materials
- 10 Pulsed-laser interaction with liquids
- 11 Laser cleaning of particulate contaminants
- 12 Laser interactions with nanoparticles
- 13 Laser-assisted microprocessing
- 14 Nano-structuring using pulsed laser radiation
- Index
- References
Summary
Introduction
Various theoretical models have been proposed to describe material removal from a solid surface heated by laser irradiation. The thermal models of Afanas'ev and Krokhin (1967), Anisimov (1968), and Olstad and Olander (1975) represent early theoretical contributions to this problem. Chan and Mazumder (1987) developed a one-dimensional steady-state model describing the damage caused by vaporization and liquid expulsion due to laser–material interaction. Much of the above work was driven by laser applications such as cutting and drilling, and was thus focused primarily on modification of the target's morphology, with no particular interest in the detailed description of the properties and dynamics of the evaporated and ablated species. Moreover, these models dealt with continuous-wave (CW) laser sources, or relatively long (millisecond) time scales.
During the first stage of interaction between the laser pulse and the solid material, part of the laser energy is reflected at the surface and part of the energy is absorbed within a short penetration depth in the material. The energy absorbed is subsequently transferred deeper into the interior of the target by heat conduction. At a later stage, if the amount of laser energy is large enough (depending upon the pulse length, intensity profile, wavelength, and thermal and radiative properties of the target material), melting occurs and vaporization follows. The vapor generated can be ionized, creating high-density plasma that further absorbs the incident laser light. Effects of this laser-plasma shielding have been shown via the simplified one-dimensional model of Lunney and Jordan (1998).
Information
- Type
- Chapter
- Information
- Transport in Laser MicrofabricationFundamentals and Applications, pp. 109 - 145Publisher: Cambridge University PressPrint publication year: 2009
References
, , and , 1990, “Laser-Induced Vaporization of Metal as a Riemann Problem,” J. Phys. D, 23, 655–661.CrossRefGoogle Scholar
, , , and , 1992, “Laser-Induced Vaporization of a Metal Surface,” J. Phys. D, 25, 57–65.CrossRefGoogle Scholar
, and , 1967, “Vaporization of Matter Exposed to Laser Emission,” Sov. Phys. JETP, 25, 639–645.Google Scholar
, , and , 2004, “Thermalization of a UV Laser Ablation Plume in a Background Gas: From a Directed to a Diffusionlike Flow,” Phys. Rev. B, 69, 056403.CrossRefGoogle Scholar
, 1968, “Vaporization of Metal Absorbing Laser Radiation,” Sov. Phys. JETP, 27, 182–183.Google Scholar
, , and , 1980, “Thermo-Optical Spectroscopy: Detection by the ‘Mirage Effect,’” Appl. Phys. Lett., 36, 130–132.CrossRefGoogle Scholar
, , , and , 2003, “Laser Ablation for Analytical Sampling: What Can We Learn from Modeling,” Spectrochim. Acta B: Atom. Spectrosc., 58 1867–1893.CrossRefGoogle Scholar
, and , 2005, “Effect of Laser Parameters on Laser Ablation and Laser-Induced Plasma Formation: A Numerical Modeling Investigation,” Spectrochim. Acta B: Atom. Spectrosc., 60, 1280–1307.CrossRefGoogle Scholar
, and , 1995, “Monte Carlo Simulations of Reactive Pulsed Laser Deposition,” Proc. SPIE, 2403, 49–59.CrossRefGoogle Scholar
, , and , 2000, “Non-equilibrium and Equilibrium Problems in Laser-induced Plasmas,” Spectrochim. Acta B: Atom. Spectrosc., 55, 559–574.CrossRefGoogle Scholar
, and , 1987, “One-Dimensional Steady-State Model for Damage by Vaporization and Liquid Expulsion due to Laser–Material Ablation,” J. Appl. Phys., 62, 4579–4586.CrossRefGoogle Scholar
, and , 1988, “A Spatial and Temporal Probe for Laser-Generated Plumes Based on Density Gradients,” Anal. Chem., 60, 864–865.CrossRefGoogle Scholar
, , et al., 1995, “Accelerated Expansion of Laser-Ablated Materials near a Solid Surface,” Phys. Rev. Lett., 75, 4706–4709.CrossRefGoogle Scholar
, , et al., 1996, “Mechanisms Affecting Kinetic Energies of Laser-Ablated Materials,” J. Vac. Sci. Technol. A, 14, 1111–1114.CrossRefGoogle Scholar
, and , 2005, “Laser Ablation of Cu and Plume Expansion into 1 atm Ambient Gas, J. Appl. Phys., 97, 063305.CrossRefGoogle Scholar
, and , 2000, “Determination of Kinetic Energy Distribution in a Laser-Ablated Titanium Plume by Emission and Laser-Induced Fluorescence Spectroscopy,” J. Heat Transfer, 122, 771–775.CrossRefGoogle Scholar
, and , 1997, “Time- and Space-Resolved Density Evolution of the Plasma Waveguide,” Phys. Rev. Lett., 78, 2373–2376.CrossRefGoogle Scholar
, 1993, “Monte Carlo Simulations of the Transport of Laser-Ablated Atoms of a Diluted Gas,” J. Appl. Phys., 74, 6401–6406.CrossRefGoogle Scholar
, 1992, “Response Functions of the Laser Beam Deflection Probe for Detection of Spherical Acoustic Waves,” Rev. Sci. Instrum., 63, 5306–5310.CrossRefGoogle Scholar
, 1993, “Interpreting Laser Ablation Using Cross-Sections,” Surface Sci., 23, 177–181.CrossRefGoogle Scholar
, , and , 1987, “A Fast, Sensitive Laser Deflection System Suitable for Transient Plasma Analysis,” Rev. Sci. Instrum., 58, 1597–1600.CrossRefGoogle Scholar
, and , 1990, “On the Gas Kinetics of Laser-Induced Evaporation of Metals,” J. Phys. D, 23, 67–74.CrossRefGoogle Scholar
, , , , and , 1990a, “Numerical Investigation of the Knudsen Layer, Appearing in the Laser-Induced Evaporation of Metals,” Proc. SPIE, 1279, 127–134.CrossRefGoogle Scholar
, , and , 1990b, “A Fundamental Plasma Based Model for Energy Transfer in Laser Material Processing,” J. Phys. D, 23, 643–654.CrossRefGoogle Scholar
, , and , 1999, “Study by a Monte Carlo Simulation of the Influence of a Background Gas on the Expansion Dynamics of a Laser-Induced Plasma Plume,” Appl. Phys. A, 69, 45–50.CrossRefGoogle Scholar
, 1992, “Fast Intensified-CCD Photography of YBa2Cu3O7−x Laser Ablation in Vacuum and Ambient Oxygen,” Appl. Phys. Lett., 60, 2732–2734.CrossRefGoogle Scholar
, , , and , 1998, “Time-Resolved Imaging of Gas Phase Nanoparticle Synthesis by Laser Ablation,” Appl. Phys. Lett., 72, 2987–2989.CrossRefGoogle Scholar
, , , and , 1989, “Time-Resolved Spectroscopic Study of the KrF Laser-Induced Plasma Plume Created above an YBaCuO Superconducting Target,” Appl. Phys. Lett., 55, 182–184.CrossRefGoogle Scholar
, , and , 2000, “Gas Dynamics of Laser Ablation: Influence of Ambient Atmosphere,” J. Appl. Phys., 88, 4352–4364.CrossRefGoogle Scholar
, and , 2003, “Near-Surface Laser–Vapour Coupling in Nanosecond Pulsed Laser Ablation,” J. Phys. D, 36, 2962–2971.CrossRefGoogle Scholar
, , and , 1995, “Computational Model for the Heat Transfer and Gas Dynamics in the Pulsed Laser Evaporation of Metals,” J. Appl. Phys., 78, 4696–4709.CrossRefGoogle Scholar
, , and , 1996, “Gas Dynamics and Radiation Heat Transfer in Excimer Laser Ablation of Aluminum,” J. Appl. Phys., 79, 7205–7215.CrossRefGoogle Scholar
, , and , 1997, “Monte Carlo Simulation of Pulsed Laser Ablation from Two-Component Target into Diluted Ambient Gas,” J. Appl. Phys., 82, 3536–3542.CrossRefGoogle Scholar
, and , 1971, Methods of Experimental Physics, and , eds., Vol. 9B, New York, Academic Press.Google Scholar
, 1990, “On the Dual Role of the Knudsen Layer and Unsteady, Adiabatic Expansion in Pulse Sputtering Phenomena,” J. Chem. Phys., 92, 5047–5056.CrossRefGoogle Scholar
, and , 1988a, “Reconsidering the Mechanisms of Laser Sputtering with Knudsen-Layer Formation Taken into Account,” Nucl. Instrum. Meth. Phys. Res. B, 32, 341–345.CrossRefGoogle Scholar
, and , 1988b, “On the Effect of Knudsen-Layer Formation on Studies of Vaporization, Sputtering and Desorption,” Surf. Sci., 198, 263–276.CrossRefGoogle Scholar
, and , 1985, “Laser Sputtering: Part III. The Mechanism of the Sputtering of Metals at Low Energy Densities,” Nucl. Instrum. Meth. Phys. Res. B, 7/8, 755–763.CrossRefGoogle Scholar
, , et al., 1996, “Modeling of Plume Dynamics in Laser Ablation Processes for Thin Film Deposition of Materials,” Phys. Plasmas, 3, 2203–2209.CrossRefGoogle Scholar
, , , and , 1992, “Formation of Plasma Columns in Atmospheric Pressure Gases by Picosecond KrF Laser Pulses,” Opt. Commun., 93, 366–377.CrossRefGoogle Scholar
, , , , and , 1996, “Synthesis of Novel Thin-Film Materials by Pulsed Laser Deposition,” Science, 273, 898–903.CrossRefGoogle ScholarPubMed
, and , 1998, “Pulsed Laser Ablation of Metals,” Appl. Surf. Sci., 127–129, 941–946.CrossRefGoogle Scholar
, , , and , 2000a, “Dynamics of an Air Breakdown Plasma on a Solid Surface during Picosecond Laser Ablation,” Appl. Phys. Lett., 76, 31–33.CrossRefGoogle Scholar
, , , and , 2000b, “Simulation of a Picosecond Laser Ablation Plasma,” Appl. Phys. Lett., 76, 3370–3372.CrossRefGoogle Scholar
, , , and , 1991, “Ultrafast X-Ray Pulses from Laser-Produced Plasmas,” Science, 251, 531–536.CrossRefGoogle ScholarPubMed
, and , 1975, “Evaporation of Solids by Laser Pulses, I. Iron,” J. Appl. Phys., 46, 1499–1505.CrossRefGoogle Scholar
, , and , 1995, “Optical Measurements of Thermal Diffusivity of a Material,” Int. J. Thermophys., 16, 973–995.CrossRefGoogle Scholar
, , , , and , 1992, “Origin of the High-Energy Electron Emission from Metals under Laser Irradiation,” Phys. Rev. B, 45, 12 210–12 217.CrossRefGoogle ScholarPubMed
, and , 1993, “The High Laser Irradiance Regime,” in Laser Ionization Mass Analysis, edited by , , and , New York, John Wiley and Sons, pp. 369–431.Google Scholar
, , et al., 1988, “Impulse Coupling to Targets in Vacuum by KrF, HF, and CO2 Single-Pulse Lasers,” J. Appl. Phys., 64, 1083–1096.CrossRefGoogle Scholar
, , , , and , 1998, “Measurements of Wavelength-Dependent Transmission in Excimer Laser-Induced Plasma Plumes and their Interpretation,” J. Phys. D, 31, 418–427.CrossRefGoogle Scholar
, , , and , 1991, “Photoacoustic and Photothermal Beam Deflection as a Probe of Laser Ablation of Materials,” J. Appl. Phys., 69, 1330–1336.CrossRefGoogle Scholar
, , and , 1992, “Photothermal Deflection Measurements for Monitoring Heat Transfer During Modulated Laser Heating of Solids,” J. Appl. Phys., 71, 53–63.CrossRefGoogle Scholar
, , and , 1994, “Detecting Laser-Induced Phase Change at the Surface of Solids via Latent Heat of Melting with a Photothermal Deflection Technique,” J. Appl. Phys., 75, 1473–1485.CrossRefGoogle Scholar
, and , 1991, “Kinetic Study of Pulsed Desorption Flows into Vacuum,” Phys. Rev. A, 43, 6722–6734.CrossRefGoogle ScholarPubMed
, 1986, “Laser Generation of Acoustic Waves in Liquids and Gases,” J. Appl. Phys., 60, R83–R121.CrossRefGoogle Scholar
, and , 1990, “Pulsed-Laser Evaporation Technique for Deposition of Thin Films: Physics and Theoretical Model,” Phys. Rev. B, 41, 8843–8859.CrossRefGoogle ScholarPubMed
, 1986, “Applications of Photoacoustic Sensing Techniques,” Rev. Mod. Phys., 58, 381–431.CrossRefGoogle Scholar
, , and eds., 1993, Laser Ionization Mass Analysis, New York, John Wiley.
, , , and , 1989, “Hydrodynamic Modeling of Laser Plasma Ionization Processes,” Int. J. Mass Spectrosc. Ion Processes, 94, 63–85.CrossRefGoogle Scholar
, , , , and , 1998, “Evidence of Ponderomotive Filamentation in Laser Produced Plasma,” Phys. Rev. Lett., 61, 2336–2339.CrossRefGoogle Scholar
, and , 1966, Physics of Shock Waves and High-Temperature Hydrodynamic Phenomena, New York, Academic Press.Google Scholar
, 2003, “Dynamics of the Plume Formation and Parameters of the Ejected Clusters in Short-Pulse Laser Ablation,” Appl. Phys. A, 76, 339–350.CrossRefGoogle Scholar
, , and , 1997, “Molecular Dynamics Model for Laser Ablation and Desorption of Organic Solids,” J. Phys. Chem. B, 101, 2028–2037.CrossRefGoogle Scholar
Accessibility standard: Unknown
Why this information is here
This section outlines the accessibility features of this content - including support for screen readers, full keyboard navigation and high-contrast display options. This may not be relevant for you.Accessibility Information
Accessibility compliance for the PDF of this chapter is currently unknown
and may be updated in the future.