Hostname: page-component-77c78cf97d-sp94z Total loading time: 0 Render date: 2026-05-02T14:43:15.171Z Has data issue: false hasContentIssue false

Influence of airfoil thickness on unsteady aerodynamic loads on pitching airfoils

Published online by Cambridge University Press:  11 June 2015

Valentina Motta
Affiliation:
Department of Aerospace Science and Technology, Politecnico di Milano, via La Masa 34, 20156, Milano, Italy
Alberto Guardone
Affiliation:
Department of Aerospace Science and Technology, Politecnico di Milano, via La Masa 34, 20156, Milano, Italy
Giuseppe Quaranta*
Affiliation:
Department of Aerospace Science and Technology, Politecnico di Milano, via La Masa 34, 20156, Milano, Italy
*
Email address for correspondence: giuseppe.quaranta@polimi.it

Abstract

The influence of the airfoil thickness on aerodynamic loads is investigated numerically for harmonically pitching airfoils at low incidence, under the incompressible and inviscid flow approximation. Force coefficients obtained from finite-volume unsteady simulations of symmetrical 4-digit NACA airfoils are found to depart from the linear Theodorsen model of an oscillating flat plate. In particular, the value of the reduced frequency resulting in the inversion – from clockwise to counter-clockwise – of the lift/angle-of-attack hysteresis curve is found to increase with the airfoil thickness. Both the magnitude and direction of the velocity vector due to pitching over the airfoil surface differ from their flat-plate values. During the upstroke, namely nose-up rotation, phase, this results in a decrease (increase) of the normal velocity magnitude over the upper (lower) surface of the airfoil. The opposite occurs during the downstroke phase. This is confirmed by comparing the computed pressure distribution to the flat-plate linear Küssner model. Therefore, beyond the inversion frequency, the lift coefficient of a finite-thickness airfoil is higher during upstroke and lower during downstroke than its flat-plate counterpart. A similar dependence is also found for the quarter-chord moment coefficient. Accordingly, a modification to the classical Theodorsen model is proposed to take into account the effects of the airfoil thickness on unsteady loads. The new model is found to accurately predict the unsteady aerodynamics of a thick symmetric and a slightly cambered airfoil with a maximum thickness in the range 4–24 %. The limits of the present inviscid flow analysis are assessed by means of numerical simulation of high Reynolds number ( $\mathit{Re}=10^{6}$ ) flows.

Information

Type
Papers
Copyright
© 2015 Cambridge University Press 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable