Hostname: page-component-6766d58669-bp2c4 Total loading time: 0 Render date: 2026-05-17T06:47:24.718Z Has data issue: false hasContentIssue false

Unsteady measurements in a separated and reattaching flow

Published online by Cambridge University Press:  20 April 2006

N. J. Cherry
Affiliation:
Department of Aeronautics, Imperial College, London Present address: Central Electricity Research Laboratories, Leatherhead, Surrey.
R. Hillier
Affiliation:
Department of Aeronautics, Imperial College, London
M. E. M. P. Latour
Affiliation:
Department of Aeronautics, Imperial College, London

Abstract

Measurements of fluctuating pressure and velocity, together with instantaneous smoke-flow visualizations, are presented in order to reveal the unsteady structure of a separated and reattaching flow. It is shown that throughout the separation bubble a low-frequency motion can be detected which appears to be similar to that found in other studies of separation. This effect is most significant close to separation, where it leads to a weak flapping of the shear layer. Lateral correlation scales of this low-frequency motion are less than the reattachment length, however; it appears that its timescale is about equal to the characteristic timescale for the shear layer and bubble to change between various shedding phases. These phases were defined by the following observations: shedding of pseudoperiodic trains of vortical structures from the reattachment zone, with a characteristic spacing between structures of typically 60% to 80% of the bubble length; a large-scale but irregular shedding of vorticity; and a relatively quiescent phase with the absence of any large-scale shedding structures and a significant ‘necking’ of the shear layer downstream of reattachment.

Spanwise correlations of velocity in the shear layer show on average an almost linear growth of spanwise scale up to reattachment. It appears that the shear layer reaches a fully three-dimensional state soon after separation. The reattachment process does not itself appear to impose an immediate extra three-dimensionalizing effect upon the large-scale structures.

Information

Type
Research Article
Copyright
© 1984 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable