Hostname: page-component-76d6cb85b7-92wsb Total loading time: 0 Render date: 2026-07-12T23:13:14.899Z Has data issue: false hasContentIssue false

REMO4 (RE = Y, Gd; M = Nb, Ta) phosphors from hybrid precursors: Microstructure and luminescence

Published online by Cambridge University Press:  31 January 2011

Xiuzhen Xiao
Affiliation:
Department of Chemistry, Tongji University, Shanghai 200092, China
Bing Yan*
Affiliation:
Department of Chemistry, Tongji University, Shanghai 200092, China
*
a)Address all correspondence to this author. e-mail: byan@tongji.edu.cn
Get access

Abstract

In this paper, YNbO4:0.05Tb3+ and GdTaO4:0.05Eu3+ phosphors were chosen to study the influence of the firing temperature on the phase and morphologies using novel modified in situ chemical coprecipitation technology. Results show that until the temperature reaches 1000 °C, the formation of YNbO4 and GdTaO4 were realized; with the increasing firing temperatures, those samples present better crystalline structure and better morphologies. The luminescent properties of Eu3+ and Tb3+ have shown that after calcinations at 1000 °C, the intensity of Eu3+ and Tb3+ increases strongly with the increasing of the calcinations temperature, while remaining relatively unchanged at the temperatures ranging between 600 and 800 °C. Furthermore, other rare earth ion doped GdTaO4 and Y1−xGdxTaO4:5 mol% Eu3+ with the different yttrium content were also synthesized after calcinating at the preferable temperature using the same method. The photoluminescence of Y1−xGdxTaO4:5 mol% Eu3+ revealed that the red emission intensity of Eu3+ increases with the increasing of gadolinium content, indicating that Gd ion plays an important role in the energy transfer process. Also, the concentration quenching has been studied in the GdTaO4:Eu3+/Dy3+ systems. Moreover, the characteristic emission lines of Tb3+, Pr3+, and Er3+ in GdTaO4 were observed, showing that the energy transfer process appears between host and those activators.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable