Hostname: page-component-6bb9c88b65-2jdt9 Total loading time: 0 Render date: 2025-07-20T14:46:03.166Z Has data issue: false hasContentIssue false
  • English
  • Français

Investigation of the dynamic behavior of a slider crank mechanism-based wheel-legged mobile robot

Published online by Cambridge University Press:  18 July 2025

Prashant Raturi Open the ORCID record for Prashant Raturi [Opens in a new window] ,
Shivansh Chaudhary Open the ORCID record for Shivansh Chaudhary [Opens in a new window]  and
Santhakumar Mohan Open the ORCID record for Santhakumar Mohan [Opens in a new window]
Prashant Raturi
Affiliation:
Department of Mechanical Engineering, IIT Palakkad, Palakkad, Kerala, India
Shivansh Chaudhary
Affiliation:
Department of Mechanical Engineering, IIT Palakkad, Palakkad, Kerala, India
Santhakumar Mohan*
Affiliation:
Department of Mechanical Engineering, IIT Palakkad, Palakkad, Kerala, India
*
Corresponding author: Santhakumar Mohan; Email: santhakumar@iitpkd.ac.in
Get access Rights & Permissions [Opens in a new window]

Abstract

This paper presents the design and dynamic analysis of a reconfigurable four-wheeled mobile robot, with front wheels capable of transforming from a conventional circular wheel into a five-spoke wheel-legged (wheg) configuration. The transformation is achieved through a reconfiguration mechanism integrating a slider-crank chain with a rack and pinion system. A comprehensive dynamic analysis of the mechanism is conducted to evaluate the torque requirements for actuation and to support the selection of a suitable off-the-shelf motor. The required actuation torque is primarily influenced by the normal contact (reaction) force between the wheel and the ground or terrain, which varies depending on surface or terrain conditions. This contact force is computed using system dynamics, and its variations are further analyzed through the robot’s dynamic response. Numerical simulations, supported by real-world field tests, validate the effectiveness of the proposed design in moderately uneven environments.

Keywords

reconfigurable wheelsslider crank mechanismlateral dynamicslongitudinal dynamics

Information

Type
Research Article
Information
Robotica , First View , pp. 1 - 30
Copyright
© The Author(s), 2025. Published by Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

Kim, Y.-S., Jung, G.-P., Kim, H., Cho, K.-J. and Chu, C.-N., “Wheel transformer: A wheel-leg hybrid robot with passive transformable wheels,” IEEE Trans. Robot. 30(6), 1487–1498 (2014).10.1109/TRO.2014.2365651CrossRefGoogle Scholar
She, Y., Hurd, C. J. and Su, H.-J.. “A Transformable Wheel Robot with a Passive Leg.” In: Proc. IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (2015) pp. 4165–4170.Google Scholar
Pan, L.-H., Kuo, C.-N., Huang, C.-Y. and Chou, J. J.. “The Claw-Wheel Transformable Hybrid Robot with Reliable Stair Climbing and High Maneuverability.” In: Proc. IEEE International Conference on Automation Science and Engineering (CASE) (2016) pp. 233–238.Google Scholar
Zhou, F., Xu, X., Xu, H. and Zhang, X.. “A Multimodal Hybrid Robot with Transformable Wheels.” In: Proc. IEEE International Conference on Real-time Computing and Robotics (RCAR) (2017) pp. 139–144.Google Scholar
Sun, T., Xiang, X., Su, W., Wu, H. and Song, Y., “A transformable wheel-legged mobile robot: Design, analysis and experiment,” Robot. Auton. Syst. 98, 30–41 (2017).10.1016/j.robot.2017.09.008CrossRefGoogle Scholar
Chen, W.-H., Lin, H.-S., Lin, Y.-M. and Lin, P.-C., “TurboQuad: A novel leg–wheel transformable robot with smooth and fast behavioral transitions,” IEEE Trans. Robot. 33(5), 1025–1040 (2017).10.1109/TRO.2017.2696022CrossRefGoogle Scholar
Vijaychandra, A., Alex, C., Mathews, M. and Sathar, A. A.. “Amphibious Wheels with a Passive Slip Mechanism for Transformation.” In: Proc. IEEE International Conference on Advanced Robotics and Mechatronics (ICARM) (2019) pp. 960–965.Google Scholar
Bai, L., Guan, J., Chen, X., Hou, J. and Duan, W., “An optional passive/active transformable wheel-legged mobility concept for search and rescue robots,” Robot. Auton. Syst. 107, 145–155 (2018).10.1016/j.robot.2018.06.005CrossRefGoogle Scholar
Zhao, X., Su, W. and Zhang, S.. “The Simulation and Analysis of a New Rescue Robot with Transformable Wheels.” In: Proc. World Conference on Mechanical Engineering and Intelligent Manufacturing (WCMEIM) (2019) pp. 545–548.Google Scholar
Merty”uz, I., TanyıldızıA, K., Taşar, B., Tatar, AB. and Yakut, O., “FUHAR: A transformable wheel-legged hybrid mobile robot,” Robot. Auton. Syst. 133, 103627 (2020).10.1016/j.robot.2020.103627CrossRefGoogle Scholar
Bai, L., Li, X., Sun, Y., Zheng, J. and Chen, X.. “A Wheel-legged Mobile Robot with Adjustable Body Length for Rescue and Search.” In: Proc. IEEE International Conference on Advanced Robotics and Mechatronics (ICARM) (2021) pp. 340–345.Google Scholar
Xu, Q., Xu, H., Xiong, K., Zhou, Q. and Guo, W.. “Design and Analysis of a Bi-directional Transformable Wheel Robot Trimode.” In: Proc. IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (2021) pp. 8396–8403.Google Scholar
Zhang, S., Yao, J., Wang, Y., Liu, Z., Xu, Y. and Zhao, Y., “Design and motion analysis of reconfigurable wheel-legged mobile robot,” Defence Technol. 18(6), 1023–1040 (2022).10.1016/j.dt.2021.04.013CrossRefGoogle Scholar
Liu, Z., Dai, C., Liu, X., Zhou, J. and Jia, Z.. “A Hybrid Wheel-leg Transformable Robot with Minimal Actuator Realization.” In: Proc. International Conference on Advanced Robotics and Mechatronics (ICARM) (2022) pp. 731–736.Google Scholar
Lee, Y., Ryu, S., Won, J. H., Kim, S., Kim, H. S. and Seo, T., “Modular two-degree-of-freedom transformable wheels capable of overcoming obstacle,” IEEE Robot. Autom. Lett. 7(2), 914–920 (2021).10.1109/LRA.2021.3096223CrossRefGoogle Scholar
Wang, H.-Y., Chen, L.-J., Yu, W.-S. and Lin, P.-C.. “A Wheel to Leg Transformation Strategy in a Leg-wheel Transformable Robot.” In: Proc. IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) (2023) pp. 293–298.Google Scholar
Tao, Y., Gao, C., Shi, Y., Li, M., Zhang, M. and Liu, D., “Analysis of motion characteristics and stability of mobile robot based on a transformable wheel mechanism,” Appl. Sci. 12(23), 12348 (2022).10.3390/app122312348CrossRefGoogle Scholar
Zheng, C., Sane, S., Lee, K., Kalyanram, V. and Lee, K., “ $\alpha$ -WaLTR: Adaptive wheel-and-leg transformable robot for versatile multiterrain locomotion,” IEEE Trans. Robot. 39, 941–958 (2022).10.1109/TRO.2022.3226114CrossRefGoogle Scholar
Fu, Z., Xu, H., Li, Y. and Guo, W., “Design of a novel wheel-legged robot with rim shape changeable wheels,” Chin. J. Mech. Eng. 36(1), 153 (2023).10.1186/s10033-023-00974-7CrossRefGoogle Scholar
Kim, J., Shim, J. W., Kang, S. W., Kim, Y. and Kim, Y. Y., “Automatic synthesis of 1-DOF transformable wheel mechanisms,” IEEE Trans. Robot. 40, 101–120 (2023).10.1109/TRO.2023.3328970CrossRefGoogle Scholar
Norton, R. L. and Han, J.. Design of Machinery: An Introduction to the Synthesis and Analysis of Mechanisms and Machines (McGraw-Hill Education, New York, 2016).Google Scholar
Sandoval-Castro, X. Y., noz-Gonzalez Mu, S., Garcia-Murillo, M. A., Ferrusca-Monroy, P. D. and Ruiz-Torres, M. F., “Four-bar linkage reconfigurable robotic wheel: Design, kinematic analysis, and experimental validation for adaptive size modification,” Robotica 42(6), 2046–2060 (2024).10.1017/S026357472400078XCrossRefGoogle Scholar
Comin, F. J. and Saaj, C. M., “Models for slip estimation and soft terrain characterization with multilegged wheel–legs,” IEEE Trans. Robot. 33(6), 1438–1452 (2017).10.1109/TRO.2017.2723904CrossRefGoogle Scholar
Zheng, C. and Lee, K.. “Wheeler: Wheel-leg Reconfigurable Mechanism with Passive Gears for Mobile Robot Applications.” In: Proc. IEEE International Conference on Robotics and Automation (ICRA) (2019) pp. 9292–9298.Google Scholar
Jaskot, A., Posiadała, B. and ’Spiewak, S., “Dynamics modelling of the four-wheeled mobile platform,” Mech. Res. Commun. 83, 58–64 (2017).10.1016/j.mechrescom.2017.05.007CrossRefGoogle Scholar
Zeidis, I. and Zimmermann, K., “Dynamics of a four-wheeled mobile robot with Mecanum wheels,” ZAMM J. Appl. Math. Mech. 99(12), e201900173 (2019).10.1002/zamm.201900173CrossRefGoogle Scholar
Li, J., Liu, Y., Yu, Z., Guan, Y., Zhao, Y., Zhuang, Z. and Sun, T., “Design, analysis, and experiment of a wheel-legged mobile robot,” Appl. Sci. 13(17), 9936 (2023).10.3390/app13179936CrossRefGoogle Scholar
Raikwar, S., Fehrmann, J. and Herlitzius, T., “Navigation and control development for a four-wheel-steered mobile orchard robot using model-based design,” Comput. Electron. Agric. 202, 107410 (2022).10.1016/j.compag.2022.107410CrossRefGoogle Scholar
Xiong, R., Li, L., Zhang, C., Ma, K., Yi, X. and Zeng, H., “Path tracking of a four-wheel independently driven skid steer robotic vehicle through a cascaded NTSM-PID control method,” IEEE Trans. Instrum. Meas. 71, 1–11 (2022).Google Scholar
Xue, J., Chen, Z., Wang, S., Wang, J. and Xu, Y., “Roll torque vibration isolation control on parallel active suspension system via impedance-based MPC for vehicular terminal,” IEEE Trans. Autom. Sci. Eng. 22, 13253–13268 (2025).10.1109/TASE.2025.3539596CrossRefGoogle Scholar
Chen, Z., Zhan, G., Jiang, Z., Zhang, W., Rao, Z., Wang, H. and Li, J., “Adaptive impedance control for docking robot via Stewart parallel mechanism,” ISA Trans. 155, 361–372 (2024).10.1016/j.isatra.2024.09.008CrossRefGoogle ScholarPubMed