Long-range ordering of tetrahedral cations in micas is favored by phengitic compositions, by the 3T stacking sequence of layers, and by tetrahedral Si:Al ratios near 1:1. Phengites of the 1M, 2M1, and 2M2 polytypes are said to show partial ordering of tetrahedral cations, although the amounts of tetrahedral substitutions are small and the accuracies of determination are not as large as desired. The 3T structures of muscovite, paragonite, lepidolite, and protolithionite show tetrahedral ordering, as do the 2M1 brittle micas margarite and an intermediate between margarite and bityite. Muscovite-3T and margarite-2M1 are also slightly phengitic relative to their ideal compositions. Examples of octahedral cation ordering in micas are more abundant and are to be expected when cations of different size and charge are present. Octahedron M(1) with its OH,F groups in the trans orientation tends to be larger than the mean of the two cis octahedra as a result of the ordering of cations and vacancies. In some samples ordering has reduced the true symmetry to a subgroup of that of the ideal space group. If ordering in subgroup symmetry results in ordered patterns of different geometries but similar energies in very small domains, the average over all unit cells may simulate long-range disorder.

Mixed-layer clays composed of randomly interstratified kerolite/stevensite occur as lake and/or spring deposits of probable Pliocene and Pleistocene age in the Amargosa Desert of southern Nevada, U.S.A. The percentage of expandable layers of these clays, determined from computer-simulated X-ray diffractograms, ranges from almost 0 to about 80%. This range in expandabilities most likely results from differences in solution chemistry and/or temperature at the time of formation. An average structural formula for the purest clay (sample P-7), a clay with about 70% expandable layers, is:

$${\left[ {\left( {M{g_{2,72}}A{l_{0,07}}F{e_{0.03}}L{i_{0.09}}} \right)\left( {S{i_{3.96}}A{l_{0.04}}} \right){O_{10}}{{\left( {OH} \right)}_2}} \right]^{ - 0.21}}{\left[ {X_{0.21}^ + } \right]^{ + 0.21}}.$$

The data suggest that talc, kerolite, and stevensite form a continuous structural series based on layer charge.

The transformation of ferrihydrite to goethite and/or hematite, as influenced by the presence of co-precipitated Si, was investigated by infrared spectroscopy (IR), X-ray powder diffraction (XRD), and transmission electron microscopy (TEM). Ferrihydrite samples having Si/Fe molar ratios ranging from 0 to 1 were synthesized by reacting Fe2(SO4)3 with NaOH to an equilibrium pH of 8.2 in the presence of Na2SiO3. The XRD pattern of the Si-free sample contained five distinct but weak peaks, whereas the patterns of ferrihydrite samples containing Si had only two broad bands. With an increase of the Si/Fe molar ratio from 0.10 to 1.0, the 2.54-Å XRD peak shifted to 2.97 Å, and broad IR bands were observed at 990 cm−1 (Si-O stretching region) and 450 cm−1 (silicate bending region). The intensities of both IR bands increased with increasing Si/Fe molar ratio.

Ferrihydrite samples were incubated at room temperature in sodium acetate/acetic acid buffer solutions at pH 3, 5, 7, and 10 and in CaCO3 suspension at pH 8.3 for 10 months. Additional samples were incubated at pH 12.5 at 24°, 40°, 60°, and 91°C for 36 hr. Room-temperature incubation of ferrihydrite samples having Si/Fe molar ratios ≥0.1 at pH 3 for one week resulted in the dissolution of Fe and the precipitation of silica gel. Ferrihydrite samples having Si/Fe molar ratios ≤0.05 transformed to poorly crystalline goethite during room-temperature incubation at pH 5. The rate of transformation and the degree of crystallinity of the product were inversely related to Si/Fe molar ratio, and, with heat treatment, were also dependent on incubation temperature. Siliceous ferrihydrite samples having Si/Fe molar ratios ≥0.10 did not transform to phases having greater crystallinity during incubation at either room temperature in buffered solutions at pH ≥7 for as long as 10 months or at pH 12.5 at 91°C for 36 hr. The XRD peak at 2.97 Å did not shift significantly during incubation procedures, providing evidence that the structure of the high-Si ferrihydrite was not significantly altered.

Adsorption isotherms and UV-visible and Mössbauer spectroscopic data point to specific interactions between flavomononucleotide (FMN) and Fe3+-smectite. The maximum amount of FMN adsorption was 0.3 mmole/g of Fe3+-smectite giving a 1:1 molar proportion of Fe3+ and FMN. The results suggest a Fe3+-FMN complex residing at the smectite surface. Other homoionic smectites (Cu2+, Zn2+, and Ca2+) exhibited lower levels of adsorption and less apparent specific interaction.

A series of hydrothermal experiments was performed to determine the effect of fluid abundance on the reaction of smectite to illite. Experiments were conducted on K-saturated montmorillonite (<0.1-µm fraction) in a closed system at 250° to 400°C using run times of 1, 7, 14, 30, and 60 days at 100 MPa (1 kbar) pressure. In fluid-deficient systems (pore spaces not saturated), the rate and extent of illitization was significantly inhibited. A rock: water ratio of 20:1 (mass: mass) produced an R0 illite/smectite (I/S) having 82% smectite layers after 60 days at 250°C, whereas a rock: water ratio of 1:1 produced an I/S having 57% smectite layers under the same conditions. The effect became less pronounced at higher temperatures, with the 20:1 and the 1:1 experimental products differing by only 11% expandability at 400°C after 60 days. In addition, the low-fluid experiments produced fewer crystalline byproducts (quartz, cristobalite, chlorite) than did the fluid-rich runs, and the I/S was more difficult to disperse and orient in the fluid-deficient samples, suggesting enhanced cementation at grain contacts or the production of particle morphologies that did not lend themselves to orientation. The difference in reactivity of the smectite and I/S as a function of water content appears to be attributable to the reduced capacity for low volumes of water to mediate the dissolution, solute transport, and precipitation reactions that make up the series of reactions collectively termed illitization. Of these variables, solute transport is likely to be affected most by reduction of fluid.

The capabilities of X-ray powder diffraction (XRD), infrared absorption (IR), solid-state magicangle-spinning nuclear magnetic resonance (MAS-NMR), and chemical dissolution methods were assessed for estimating the amount of noncrystalline material in a ground kaolinite. The Georgia kaolinite was ground in a mechanical mortar for various lengths of time to produce a set of ground samples containing different amounts of the resulting noncrystalline material. In the XRD method, the intensities of characteristic reflections at 7.2 and 4.47 Å did not respond proportionally to the amount of crystalline kaolinite. Although a transmission-type X-ray diffraction method using the hk reflection gave a slightly better estimate than the reflection-type X-ray diffraction method using the basal reflection, both methods gave overestimated values for the amount of noncrystalline material. This overestimation may have been caused by a masking effect due to coaggregation. Using the characteristic IR absorption band at 3700 cm-1 underestimated the amount of the noncrystalline material, if the proportion of this material <50%.

Extraction with NaOH gave estimations 15 to 20% greater than extraction with alkaline Tiron, except for the sample ground for 24 hr, for which both extractions indicated the presence of about 50% noncrystalline material. X-ray powder diffraction data of the residues after these extractions indicated that they consisted of crystalline kaolinite. 29Si NMR spectra of samples ground for ≥ 30 hr suggested that SiO4 tetrahedra were considerably distorted.27 Al NMR spectra showed a signal for tetrahedral A1 for the sample ground for 10 hr, which increased with an increase in grinding time. Plots of the Al(IV)/[Al(IV) + Al(VI)] ratios vs. time were similar to those of chemical extraction curves. Inasmuch as extraction with hot 0.5 M NaOH is a rather harsh treatment, the composition of the noncrystalline material must have been similar to that of the crystalline kaolinite. The chemical dissolution using alkaline Tiron appeared to be superior to other methods, such as XRD, IR, and NaOH extraction, for estimating the amount of noncrystalline material in kaolinite.

The fall armyworm (FAW) Spodoptera frugiperda (J.E. Smith) is a highly damaging invasive omnivorous pest that has developed varying degrees of resistance to commonly used insecticides. To investigate the molecular mechanisms of tolerance to tetraniliprole, spinetoram, and emamectin benzoate, the enzyme activity, synergistic effect, and RNA interference were implemented in S. frugiperda. The functions of cytochrome P450 monooxygenase (P450) in the tolerance to tetraniliprole, spinetoram, and emamectin benzoate in S. frugiperda was determined by analysing changes in detoxification metabolic enzyme activity and the effects of enzyme inhibitors on susceptibility to the three insecticides. 102 P450 genes were screened via transcriptome and genome, of which 67 P450 genes were differentially expressed in response to tetraniliprole, spinetoram, and emamectin benzoate and validated by quantitative real-time PCR. The expression patterns of CYP9A75, CYP340AA4, CYP340AX8v2, CYP340L16, CYP341B15v2, and CYP341B17v2 were analysed in different tissues and at different developmental stages in S. frugiperda. Silencing CYP340L16 significantly increased the susceptibility of S. frugiperda to tetraniliprole, spinetoram, and emamectin benzoate. Furthermore, knockdown of CYP340AX8v2, CYP9A75, and CYP341B17v2 significantly increased the sensitivity of S. frugiperda to tetraniliprole. Knockdown of CYP340AX8v2 and CYP340AA4 significantly increased mortality of S. frugiperda to spinetoram. Knockdown of CYP9A75 and CYP341B15v2 significantly increased the susceptibility of S. frugiperda to emamectin benzoate. These results may help to elucidate the mechanisms of tolerance to tetraniliprole, spinetoram and emamectin benzoate in S. frugiperda.

Glauconite from the oxidized and reduced zones of soil-geologic columns at two Coastal Plain sites, one in Maryland and one in New Jersey, was examined by Mössbauer spectroscopy. The data indicate that glauconite in the reduced zones had a higher proportion of its structural iron in the ferrous, as opposed to the ferric state. The Fe2+/Fe3+ ratio ranged from 0 to 0.2 for the glauconite from the oxidized zone and was about 0.35 for the glauconite in the reduced zones. Despite the presence of pyrite in the reduced zone, which might be expected to make ferric iron unstable because of the presence of sulfide S, about 75% of the Fe in the glauconite in the reduced zone was in the ferric state. Thin section analysis showed some glauconite in the reduced zones to be intimately associated with pyrite and some aggregates of fine pyrite crystals were locally present in cracks in glauconite pellets. In the oxidized zones, pyrite was absent and the glauconite was more yellow under plane-polarized light, as opposed to more green for the glauconite in the reduced zones. These data indicate that reports of studies of glauconite should stipulate whether samples are from the oxidized or reduced zone of soil-geologic columns.

Lepidocrocite samples, γ-FeOOH, containing 0–10 mole % Al-for-Fe substitution were synthesized at 15°C and pH 8 by oxidizing mixed FeCl2-AlCl3 solutions. The unit-cell parameters a, b, and c were measured from step-counted X-ray powder diffractograms using seven lines and Si as an internal standard. With increasing Al substitution from 0 to 10 mole % the unit-cell edge lengths a, b, and c decreased regularly by 0.3, 0.8, and 0.6%, respectively. Furthermore, the crystals became smaller, but gained in thermal stability. Decrease in crystal size parallel to the y axis led to a significant increase of the OH-stretch vibration and a decrease of the out-of-plane OH-bending vibration due to a weakening of the hydrogen bond between the zig-zag layers in the structure.

L'opposition entre contrainte et libre nécessité a conduit nombre de commentateurs de Spinoza à concevoir la libération éthique comme une reconquête de soi contre les aliénations causées par l'extériorité, et à confondre plus ou moins explicitement contrainte et contrariété de la puissance d'agir. L'analyse du mot coactus dans le texte spinoziste montre que les modes finis ne peuvent être et ne peuvent se libérer que par et dans la contrainte, qui n'est pas forcément contrariante. Une telle analyse rejoint celles des sociologues Émile Durkheim et Pierre Bourdieu.

Core cuttings from numerous wells traversing Oligocene through Recent sediments of the Texas Gulf Coast were examined with a scanning electron microscope using the back-scattered electron imaging mode (BSE) to ascertain diagenetic changes in clays and associated minerals of mudrocks and of adjacent sandstones. Several occurrences of authigenic kaolinite and chlorite were noted, each characterized by a specific texture and a specific diagenetic microenvironment. In all occurrences kaolinite appears to have formed before chlorite, and in some the kaolinite appears to have precipitated directly from solution. Chlorite, ubiquitously an iron-rich variety, appears to have precipitated in some places directly from solution. It has also been noted pseudomorphous after kaolinite. A progressive decrease in the iron content of mixed-layer illite/smectite with increasing depth is believed to have released the necessary iron and to have driven the kaolinite-to-chlorite reaction.

The smectite to illite reaction was studied by transmission and analytical electron microscopy (TEM/AEM) in argillaceous sediments from depths of 1750, 2450, and 5500 m in a Gulf Coast well. Smectite was texturally characterized as having wavy 10- to 13-Å layers with a high density of edge-dislocations, and illite, as having relatively defect-free straight 10-Å layers. The structures of smectite and illite were not continuous parallel to (001) at smectite-illite interfaces. AEM data showed that the smectite and illite were chemically distinct although smectite had a more variable composition. Illite formation appeared to have initiated with the growth of small packets of illite layers within subparallel layers of smectite matrix. With increasing depth, ubiquitous thin packets of illite layers increased in size until they coalesced.

A model for the transition requires that the structure of smectite was largely disrupted at the illite-smectite interface and reconstituted as illite, with concomitant changes in the chemistry of octahedral and tetrahedral sites. At least partial Na-K exchange of smectite preceded illite formation. Transport of reactants (K, Al) and products (Na, Si, Fe, Mg, H20) through the surrounding smectite matrix may have taken place along dislocations.

The smectite-to-illite conversion process for the studied samples does not necessarily appear to have required mixed-layer illite/smectite as an intermediate phase, and TEM and AEM data from unexpanded samples were found to be incompatible with the existence of mixed-layer illite/smectite in specimens whose XRD patterns indicated its presence.

Synthetic sodium bimessite, having a cation-exchange capacity (CEC) of 240 meq/100 g (cmol/kg) was transformed into Li, K, Mg, Ca, Sr, Ni, and Mn2+ cationic forms by ion exchange in an aqueous medium. Competitive adsorption studies of Ni and Ba vs. Mg showed a strong preference for Ni and Ba by bimessite. The product of Mg2+-exchange was buserite, which showed a basal spacing of 9.6 Å (22°C, relative humidity (RH) = 54%), which on drying at 105°C under vacuum collapsed to 7 Å. Of the cation- saturated bimessites with 7-Å basal spacing, only Li-, Na-, Mg-, and Ca-bimessites showed cation exchange.

Heating bimessite saturated with cations other than K produced a disordered phase between 200° and 400°C, which transformed to well-crystallized phases at 600°C. K-exchanged bimessite did not transform to a disordered phase; rather a topotactic transformation to cryptomelane was observed. Generally the larger cations, K, Ba, and Sr, gave rise to hollandite-type structures. Mn- and Ni-bimessite transformed to bixbyite-type products, and Mg-bimessite (buserite) transformed to a hausmannite-type product. Li-bimessite transformed to cryptomelane and at higher temperature converted to hausmannite. The hollandite-type products retained the morphology of the parent bimessite. The mineralogy of final products were controlled by the saturating cation. Products obtained by heating natural bimessite were similar to those obtained by heating bimessite saturated with transition elements.

Uranyl acetatye solutions, ranging in concentration from about 100 ppm to 3700 ppm, were re-acted with the Na-, K-, and Ca- forms of zeolite A. The crystalline products from the Na- and K-A zeolites resembled compreignacite (K2O·6UO3·11H2O) and from the Ca-A, becquerelite (CaO·6UO3·11H2O). With higher concentrations of uranyl acetate, only X-ray-amorphous products were obtained. The compreignacite-like products gave sharp X-ray powder diffraction patterns and were indexed with orthorhombic, quasi-hexagonal unit cells which showed a significant variation of the axial ratio b/a from values just greater than, to values just less than √3. The becquerelite-like phase was always accompanied by unreacted zeolite. Compreignacite was synthesized from uranyl acetate and KOH solutions at room temperature over a period of several days.

The influence of manganese oxide minerals (cryptomelane, hausmannite, and pyrolusite) on the formation of iron oxides was studied in the FeCl2-NH4OH system at different Mn/Fe molar ratios (0, 0.01, 0.1, and 1.0) and pHs (3.0, 4.0, 5.0, and 6.0) by X-ray powder diffraction, infrared absorption, transmission electron microscopic, and chemical analyses. In the absence of Mn minerals, lepidocrocite (γ-FeOOH) precipitated at pHs 5.0 and 6.0; however, no precipitate formed at lower pHs. All the Mn minerals studied promoted the precipitation of iron oxides and oxyhydroxides. In the presence of Mn oxides, Fe2+ was oxidized to Fe3+, which hydrolyzed and precipitated as noncrystalline and/or different crystalline iron oxides and oxyhydroxides, depending on the nature of the Mn oxides present in the system. Simultaneously, Mn2+ was detected in solution after the reaction by electron spin resonance spectroscopy. The presence of cryptomelane and hausmannite resulted in the formation of åkaganeite (β-FeOOH) and magnetite (Fe3O4), respectively. Thus, the effect of Mn oxides on the formation of Fe oxide minerals in the weathering zone merits attention.

The rehydration properties and behavior of interlayer cations of Ca-, Mg-, Na-, and K-saturated homoionic saponite and vermiculite heated at various temperatures were examined and their rehydration mechanisms elucidated. The most notable features of saponite were (1) except for the Mg-saturated specimen, all saponite samples rehydrated until the crystal structure was destroyed by heating; (2) the rehydration rate in air after heating decreased in the order: K+ > Na+ > Ca2+ > Mg2+; (3) the interlayer cations apparently migrated into hexagonal holes of the SiO4 network on thermal dehydration; and (4) the b-parameter expanded on thermal dehydration. The rehydration properties and behavior of interlayer cations of vermiculite were: (1) except for the K-saturated specimen, all vermiculite samples rehydrated until the crystal structure was destroyed by heating; (2) the rehydration rate in air after heating decreased in the order: Mg2+ > Ca2+ > Na+ > K+; (3) the interlayer cations apparently did not migrate into the hexagonal holes, but remained at the center of the interlayer space, even after thermal dehydration; and (4) except for the K-saturated specimen, the 6-parameters of the samples contracted on thermal dehydration. The different rehydration properties of saponite and vermiculite were apparently due to the behavior of the interlayer cations during thermal dehydration. For rehydration to occur, the interlayer cations of saponite had to migrate out of the hexagonal holes. Consequently, saponite saturated with a large cation rehydrated rapidly, whereas saponite saturated with a small cation rehydrated slowly. On the other hand, the interlayer cations of vermiculite remained in the interlayer space; therefore, the rehydration properties of vermiculite were strongly affected by the hydration energies of the interlayer cations. Furthermore, electron diffraction patterns suggested that the saponite and vermiculite consisted of random stacking and ordered stacking of adjacent 2:1 layers, respectively. The nature of the stacking of the minerals seemed to be the most important factor controlling the behavior of interlayer cations in the thermal dehydration process.

Intercalates of Georgia well-crystallized kaolinite with formamide, N-methylformamide (NMF), and dimethylsulfoxide (DMSO) were prepared at room temperature by dispersing the clay in the organic liquid. Several physical and chemical properties of the intercalated organic molecules and the clay, while intercalated and after de-intercalation, were examined using nuclear magnetic resonance (NMR), infrared (IR), and electron paramagnetic resonance spectroscopy (EPR), and specific heat (Cp) measurements. The chemical bonding between the inner-surface hydroxyls and the organic molecules, as indicated by IR, was strongest for DMSO and weakest for formamide. The distortion of the kaolinite layer, as shown by EPR, also was greatest for DMSO and least for formamide. NMR T1 measurements indicated a relatively strong DMSO-kaolinite surface interaction that slowed down the methyl group reorientation comparable to that in bulk solid DMSO. T1 measurements indicated a weaker interaction for NMF. De-intercalation by mild heating did not return the kaolinite to its original structural state as shown by EPR and Cp. The greatest disorder was found for the DMSO de-intercalate and the least for the formamide de-intercalate. These experiments show that for sufficiently strong bonding between the clay inner surface and the intercalating molecule, the structure of the clay is capable of distortion, which is partly temporary and partly permanent. The permanent changes probably involve the introduction of stacking faults.

The rate of dissolution of akaganéite in HCl increased with time over the bulk of the reaction leading to a sigmoid dissolution vs. time curve. The bulk of the dissolution of lepidocrocite could be described by the cube root law. Transmission electron microscopy examination of partly dissolved crystals of akaganéite showed that acid attack proceeded mainly along the [001] direction. Initially, the tapered ends of the crystals became squared, and as dissolution continued the lengths of the crystals decreased steadily. At the same time, the crystals were gradually hollowed out. Acid attack was most pronounced at the edges of the crystals of lepidocrocite and appeared to involve a disruption of the hydrogen bonds that link the sheets of octahedra making up the structure. Defects also acted as sites for preferential acid attack. Dissolution of multi-domainic crystals involved preferential attack along the domain boundaries, as well as at the edges of the crystals. Single-domain crystals were well developed, but appeared to contain internal imperfections, which promoted the formation of holes on the otherwise unreactive (010) faces.