In Japan, three trematode species of the genus Azygia have been recorded: A. gotoi, A. perryii, and A. rhinogobii. Here, we report the first detection of A. hwangtsiyui in Japan, identified from the introduced snakehead Channa argus. This trematode was previously known only from the snakeheads in mainland China. Between 2015 and 2024, we sampled snakeheads and snails in Japan, collecting adult trematodes and rediae. Adult trematodes were identified morphologically as A. hwangtsiyui, a determination corroborated by molecular analyses of the COI and 28S rDNA regions. Rediae extracted from the snail Sinotaia quadrata histrica were also identified molecularly as A. hwangtsiyui, indicating the snail acts as an intermediate host. Juvenile trematodes from the short-spined Japanese trident goby Tridentiger brevispinis were also morphologically identified as A. hwangtsiyui, indicating that this goby acts as a paratenic host. Given the snakehead’s introduction to Japan between 1923 and 1924, the absence of records of later introductions, and the presence of both intermediate and paratenic hosts in Japan at that time, A. hwangtsiyui was likely introduced concurrently with the snakehead. As the detection of three COI haplotypes suggests multiple introductions, subsequent introductions via the aquarium trade or other pathways involving the transport of freshwater fish and mollusks from Asia to Japan are also plausible.

During 2021 through 2023, the golden mussel Limnoperna fortunei and freshwater fishes were sampled from 28 sites in the Tone River system, Japan, and adult trematodes of Dollfustrema were found in the fishes. Molecular and morphological analyses based on 28S rDNA and the ITS1−5.8S−ITS2 region revealed the trematode as ‘Dollfustrema hefeiense’, previously reported in Mainland China and likely introduced to Japan. Given that its scientific name was considered invalid, we re-described the species as Dollfustrema invadens n. sp. Additionally, the DNA-based survey helped clarify the trematode’s life cycle in the river system. A sporocyst and metacercariae were detected in the golden mussel’s visceral mass and in the muscles of two small freshwater fish species, respectively. The channel catfish Ictalurus punctatus harboured mature trematodes in its intestine, and adult trematodes were also found in the muscles of fishes infected with metacercariae, suggesting direct metacercariae development in fish muscle. Furthermore, another introduced bucephalid trematode, Prosorhynchoides ozakii, previously reported in the river system, was detected in the mussels and fishes. Moreover, co-infection of both bucephalid trematodes was observed in certain fishes.

Rheotaxis and migration of cells in a flow field have been investigated intensively owing to their importance in biology, physiology and engineering. In this study, first, we report our experiments showing that the microalgae Chlamydomonas can orient against the channel flow and migrate to the channel centre. Second, by performing boundary element simulations, we demonstrate that the mechanism of the observed rheotaxis and migration has a physical origin. Last, using a simple analytical model, we reveal the novel physical mechanisms of rheotaxis and migration, specifically the interplay between cyclic body deformation and cyclic swimming velocity in the channel flow. The discovered mechanism can be as important as phototaxis and gravitaxis, and likely plays a role in the movement of other natural microswimmers and artificial microrobots with non-reciprocal body deformation.

Molybdenum disulfide (MoS2) is expected to be applied for devices in various fields owing to its unique characteristics. Establishing a high-productivity manufacturing method which yields high quality films is an important and unresolved issue for the practical applications of MoS2. Among different techniques conducted by researchers all over the world, our approach is cold-wall metal-organic chemical vapor deposition, and we previously reported the deposition of MoS2 with i-Pr2DADMo(CO)3, a novel Mo precursor [S. Ishihara, et al., MRS Advances 3, 379-384 (2018).]. In this study, with the aim of further improving the quality of the MoS2 film using this new Mo precursor, various film formation conditions were controlled and the influence on the film quality was investigated. X-ray photoelectron spectroscopy, atomic force microscopy and Raman spectroscopy were used as evaluation techniques of the samples. As a result, mm-scale uniform film was formed with the deposition time less than 30 min. at temperature as low as 400 °C to 500 °C. It was revealed that maintaining low Mo/S supply ratio (SRMo/S) is crucial in fabricating high quality films.

We report the investigation on the properties of a novel Te precursor (i-C3H7)2Te and its effectiveness in fabricating MoTe2. The vapor pressure of the precursor was obtained by measuring the pressure as a function of its temperature in a sealed chamber. As a result it showed a high vapor pressure of 552.1 Pa at room temperature. The decomposition of the precursor was also investigated using DFT calculation. It was shown that the most likely reaction during the course of the decomposition of (i-C3H7)2Te is (i-C3H7)2Te → H2Te + 2 C3H7. The effectiveness of the precursor on the fabrication of MoTe2 was also investigated. Sputter-deposited MoO3 was tellurized in a quartz-tube furnace at the temperature up to 440°C. The resulting film showed that the 80% of the original MoO3 was tellurized to form MoTe2. It was also shown that further optimization of tellurization is required in order to prevent formation of metal Mo and elemental Te.

We report the synthesis of MoS2(1-x)Te2x by co-sputtering deposition and effect of mixture on its bandgap. The deposition was carried out at room temperature, and the sputtering power on individual MoS2 and MoTe2 targets were varied to obtain films with different compositions. Investigation with X-ray photoelectron spectroscopy confirmed the formation of Mo-Te and Mo-S bonds after post-deposition annealing (PDA), and one of the samples exhibited composition ratio of Mo:S:Te = 1:1.2:0.8 and 1:1.9:0.1 achieving 1:2 ratio of metal to chalcogen. Bandgap of MoS1.2Te0.8 and MoS1.9Te0.1 was evaluated with Tauc plot analysis from the extinction coefficient obtained by spectroscopic ellipsometry measurements. The obtained bandgaps were 1.0 eV and 1.3 eV. The resulting bandgap was lower than that of bulk MoS2 and higher than that of bulk MoTe2 suggesting mixture of both materials was achieved by co-sputtering.

Molybdenum disulfide (MoS2) thin films were fabricated by two-step chemical vapor deposition (CVD) using (t-C4H9)2S2 and the effects of temperature, gas flow rate, and atmosphere on the formation were investigated in order to achieve high-speed low-temperature MoS2 film formation. From the results of X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) investigations, it was confirmed that c-axis orientation of the pre-deposited Mo film has a significant involvement in the crystal orientation after the reaction low temperature sulfurization annealing and we successfully obtained 3 nm c-axis oriented MoS2 thin film. From the S/Mo ratios in the films, it was revealed that the sulfurization reaction proceeds faster with increase in the sulfurization temperature and the gas flow rate. Moreover, the sulfurization under the H2 atmosphere promotes decomposition reaction of (t-C4H9)2S2, which were confirmed by XPS and density functional theory (DFT) simulation.

A fully coherent free electron laser (FEL) seeded with a higher-order harmonic (HH) pulse from high-order harmonic generation (HHG) is successfully operated for a sufficiently prolonged time in pilot user experiments by using a timing drift feedback. For HHG-seeded FELs, the seeding laser pulses have to be synchronized with electron bunches. Despite seeded FELs being non-chaotic light sources in principle, external laser-seeded FELs are often unstable in practice because of a timing jitter and a drift between the seeding laser pulses and the accelerated electron bunches. Accordingly, we constructed a relative arrival-timing monitor based on non-invasive electro-optic sampling (EOS). The EOS monitor made uninterrupted shot-to-shot monitoring possible even during the seeded FEL operation. The EOS system was then used for arrival-timing feedback with an adjustability of 100 fs for continual operation of the HHG-seeded FEL. Using the EOS-based beam drift controlling system, the HHG-seeded FEL was operated over half a day with an effective hit rate of 20%–30%. The output pulse energy was $20~{\rm\mu}\text{J}$ at the 61.2 nm wavelength. Towards seeded FELs in the water window region, we investigated our upgrade plan to seed high-power FELs with HH photon energy of 30–100 eV and lase at shorter wavelengths of up to 2 nm through high-gain harmonic generation (HGHG) at the energy-upgraded SPring-8 Compact SASE Source (SCSS) accelerator. We studied a benefit as well as the feasibility of the next HHG-seeded FEL machine with single-stage HGHG with tunability of a lasing wavelength.

Molybdenum disulfide (MoS2), one of the transition-metal dichalcogenides, is a 2-dimensional semiconducting material that has a layered structure. Owing to excellent optical and electronic properties, the ultra-thin MoS2 film is expected to be used for various devices, such as transistors and flexible displays. In this study, we investigated the physical and chemical properties of sputtered-MoS2 film in the sub-10-nm region by Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). As the results of Raman spectroscopy investigations, we observed two Raman modes, E1 2g and A1g, in the 2-dimensional MoS2 films. As the thickness of the MoS2 film decreased, the peak frequency difference between E1 2g and A1g modes increased. From the XPS investigations, we confirmed sulfur reductions from the 2-dimensional MoS2 films. Therefore, we considered that the sulfur vacancies in the MoS2 film affected the Raman peak positions. Moreover, we performed the additional sulfurization of sputtered-MoS2 films. From the XPS and Raman investigations, the quality of the sputtered-MoS2 films was improved by the additional sulfurization.

KNbO3 thick films were deposited on (100)c SrRuO3//(100)SrTiO3 substrates at 240 °C for 3 h by hydrothermal method. Film thickness increased linearly with increasing the deposition number of times and 130 μm thickness was achieved by the 6 time deposition. XRD analysis showed the growth of epitaxial orthorhombic films with the mixture orientation of (100), (010) and (001). Cross-sectional SEM observation showed that the 130 μm-thick film was dense and no obvious voids inside the film. In addition, the crystal structure change along film thickness direction was not detected from the cross-sectional Raman spectral observation.

The Shozu Herpes Zoster (SHEZ) Study was designed to clarify the incidence of and predictive and immunological factors for herpes zoster in a defined community-based Japanese population. As part of this series, a total of 5683 residents aged ⩾50 years received a varicella-zoster virus (VZV) skin test with VZV antigen, and 48 h later, the erythema and oedema were assessed by measuring the longest diameter. The diameters of both the erythema and oedema decreased with the increasing age of the subject. Sixty-three subjects contracted herpes zoster within a year after receiving the VZV skin test. Analysis of the herpes zoster incidence rate vs. the skin test reaction revealed that the shorter the diameter of erythema or oedema, the greater the likelihood of herpes zoster. These results demonstrated that the VZV skin test is an excellent surrogate marker for predicting the risk of herpes zoster.

Background: Thirty-three Japanese children and adolescents diagnosed with an anxiety disorder participated in individual or group Cognitive Behaviour Therapy (CBT) that was modelled after evidence-based intervention programs developed in Western countries. Method: The treatment consisted of: (a) building rapport and education; (b) identifying emotions and recognizing cognitive self-talk; (c) challenging anxious self-talk; (d) developing an anxiety hierarchy and in vivo exposures; and (e) planning for future challenges. Results: Three months following treatment, 20 of the 33 children and adolescents (60.91%) no longer met criteria for their principal anxiety disorders and 16 (48.48%) were free from all anxiety disorders. Self-reported anxiety, depression, and cognitive errors also decreased significantly from pre- to post-treatment and these gains were maintained at 3-month follow-up. For the most part, similar outcomes were found in both the group and individual formats of CBT. Conclusions: This study provides preliminary support for the transportability of CBT in both an individual and group format to Japan.

High reliability, low power consumption and high speed laser diodes are required for optical interconnect. We developed 1060nm VCSELs with InGaAs/GaAs strained quantum wells, oxide-confined and double intra-cavity structures for that purpose. As for the power consumption, low power dissipation of 0.14 mW/Gbps at 10 Gbps operation has been achieved. Clear eye openings up to 20 Gbps were confirmed at a low bias current of 5 mA. In the reliability test, accelerated aging tests were performed up to 5,000 hours at 6 mA in three different temperatures, 70 oC, 90 oC and 120 oC. The total number of the VCSELs was 4,898 pcs (approximately 5,000). No failure was observed. Under the normal operating condition of 40 oC and 6 mA, the total device-hours was 7.75×107 hours assuming Ea = 0.35 eV according to Telcordia GR-468-CORE. The random failure rate of 30 FIT with the confidence level (C.L.) of 90 % and 12 FIT with the C.L. of 60 % were estimated. To estimate the wear-out lifetime and the number of FITs, high stressed aging tests with 170 oC and 6 mA were performed. With the acceleration factor of Ea = 0.7 eV in the wear-out failure, the median lifetime was 3,000 hours which was equivalent to 300 years in 40 oC ambient. The FIT numbers due to the wear-out were estimated as 0.3 FIT for 10 years. Compared with the random failure rate of 30 FIT, the wear-out failure rates are considered to be negligible. In the extremely long term aging test with 90 oC and 6 mA, no wear-out trend has been observed in both threshold current and optical power up to 20,000 hours operation. These results indicate that 1060 nm VCSEL is promising light source used in optical interconnect for high performance computers and data centers.

Crystallinity of area-selective Ge layer with a (0 0 1) surface grown on Si substrate has been investigated by means of diffractometry using a parallel X-ray microbeam. The measured lattice parameters of 〈0 0 1〉 direction were about 0.17% smaller than that of bulk Ge crystal. This tensile strain value was almost the same as the simulated ones that used the finite-element method.

The cumulus–oocyte–complexes (COCs) recovery rates with respect to reproductive status per sei (Balaenoptera borealis) and Bryde's (B. edeni) whales were determined in Experiment 1. The number of COCs recovered ranged from 16.0 to 30.6 and from 6.7 to 26.8 per sei and Bryde's whales, respectively. The effects of COCs grades and protein supplementation in embryo culture medium on development of in vitro fertilized (IVF) embryos were evaluated in sei and Bryde's whales in Experiment 2. The COCs were classified into either Grade A (COCs with five or more layers of compact cumulus cells) or Grade B (COCs with less than five layers of compact or expanded cumulus cells) before being cultured for IVM. The cleavage (12.0 to 19.5%), 4-cell (8.0 to 12.0%) and 8-cell (4.0 to 8.0%) formation rates in sei whales did not vary significantly between embryos derived from either grade A or B oocytes and between embryos cultured in either fetal whale serum (FWS)- or bovine serum albumin (BSA)-supplemented medium. The cleavage (4.0 to 14.8%), 4-cell (0.0 to 7.5%) and 8-cell (0.0 to 2.6%) formation rates in Bryde's whales did not vary significantly between embryos derived from either grade A or B oocytes and between embryos cultured in either FWS- or BSA-supplemented medium. The grade B oocytes cultured in FWS-supplemented medium developed to morula stage (1.1%) in sei whales. In conclusion, the present study indicates that IVF in sei whales is possible to achieve cleaved embryos developing to morula stage. This is the first in vitro embryo production attempt in sei and Bryde's whales.