Owing to their ultra-high accelerating gradients, combined with injection inside micrometer-scale accelerating wakefield buckets, plasma-based accelerators hold great potential to drive a new generation of free-electron lasers (FELs). Indeed, the first demonstration of plasma-driven FEL gain was reported recently, representing a major milestone for the field. Several groups around the world are pursuing these novel light sources, with methodology varying in the use of wakefield driver (laser-driven or beam-driven), plasma structure, phase-space manipulation, beamline design, and undulator technology, among others. This paper presents our best attempt to provide a comprehensive overview of the global community efforts towards plasma-based FEL research and development.

High-power femtosecond lasers beyond $5~\unicode[STIX]{x03BC}\text{m}$ are attractive for strong-field physics with mid-infrared (IR) fields but are difficult to scale up. In optical parametric chirped-pulse amplification (OPCPA) at mid-IR wavelengths, a nonlinear crystal is vital, and its transmittance, dispersion, nonlinear coefficient and size determine the achievable power and wavelength. OPCPA beyond $5~\unicode[STIX]{x03BC}\text{m}$ routinely relies on semiconductor crystals because common oxide crystals are not transparent in this spectral range. However, the small size and low damage threshold of semiconductor crystals fundamentally limit the peak power to gigawatts. In this paper, we design a terawatt-class OPCPA system at $5.2~\unicode[STIX]{x03BC}\text{m}$ based on a new kind of oxide crystal of $\text{La}_{3}\text{Ga}_{5.5}\text{Nb}_{0.5}\text{O}_{14}$ (LGN). The extended transparent range, high damage threshold, superior phase-matching characteristics and large size of LGN enable the generation of 0.13 TW seven-cycle pulses at $5.2~\unicode[STIX]{x03BC}\text{m}$. This design fully relies on the state-of-the-art OPCPA technology of an octave-spanning ultrafast Ti:sapphire laser and a thin-disk Yb:YAG laser, offering the performance characteristics of high power, a high repetition rate and a stable carrier–envelope phase.

With the development of high-volume manufacturing for very-large-scale integrated circuits, the purity of the light source in the extreme ultraviolet lithography (EUVL) system needs to fulfil extreme requirements in order to avoid thermal effect, optical distortion and critical dimension errors caused by out-of-band radiations. This paper reviews the key technologies and developments of the spectral purity systems for both a free-standing system and a built-in system integrated with the collector. The main challenges and developing trends are also discussed, with a view towards practical applications for further improvement. Designing and manufacturing spectral purity systems for EUVL is not a single task; rather, it requires systematic considerations for all relevant modules. Moreover, the requirement of spectral purity filters drives the innovation in filtering technologies, optical micromachining and advanced metrology.

Polarimetry is a highly sensitive method to quantify changes of the polarization state of light when passing through matter and is therefore widely applied in material science. The progress of synchrotron and X-ray free electron laser (XFEL) sources has led to significant developments of X-ray polarizers, opening perspectives for new applications of polarimetry to study source and beamline parameters as well as sample characteristics. X-ray polarimetry has shown to date a polarization purity of less than $1.4\times {10}^{-11}$, enabling the detection of very small signals from ultrafast phenomena. A prominent application is the detection of vacuum birefringence. Vacuum birefringence is predicted in quantum electrodynamics and is expected to be probed by combining an XFEL with a petawatt-class optical laser. We review how source and optical elements affect X-ray polarimeters in general and which qualities are required for the detection of vacuum birefringence.

The eXawatt Center for Extreme Light Studies project aimed to create a large scientific infrastructure based on lasers with giant peak power. The project relies on the significant progress achieved in the last decade. The planned infrastructure will incorporate a unique light source with a pulse power of 600 PW using optical parametric chirped pulse amplification in large-aperture KD2PO4, deuterated potassium dihydrogen phosphate crystals. The interaction of such laser radiation with matter represents a completely new fundamental physics. The direct study of the space–time structure of vacuums and other unknown phenomena at the frontier of high-energy physics and the physics of superstrong fields will be challenged. Expected applications will include the development of compact particle accelerators, the generation of ultrashort pulses of hard X-ray and gamma radiation for material science enabling one to probe material samples with unprecedented spatial and temporal resolution, the development of new radiation and particle sources, etc. The paper is translation from Russian [Kvantovaya Elektronika 53, 95 (2023)].

The recent achievement of fusion ignition with laser-driven technologies at the National Ignition Facility sets a historic accomplishment in fusion energy research. This accomplishment paves the way for using laser inertial fusion as a viable approach for future energy production. Europe has a unique opportunity to empower research in this field internationally, and the scientific community is eager to engage in this journey. We propose establishing a European programme on inertial-fusion energy with the mission to demonstrate laser-driven ignition in the direct-drive scheme and to develop pathway technologies for the commercial fusion reactor. The proposed roadmap is based on four complementary axes: (i) the physics of laser–plasma interaction and burning plasmas; (ii) high-energy high repetition rate laser technology; (iii) fusion reactor technology and materials; and (iv) reinforcement of the laser fusion community by international education and training programmes. We foresee collaboration with universities, research centres and industry and establishing joint activities with the private sector involved in laser fusion. This project aims to stimulate a broad range of high-profile industrial developments in laser, plasma and radiation technologies along with the expected high-level socio-economic impact.