A design and manufacturing method is described for creating a motor tendon–actuated soft foam robot. The method uses a castable, light, and easily compressible open-cell polyurethane foam, producing a structure capable of large (~70% strain) deformations while requiring low torques to operate (<0.2 N·m). The soft robot can change shape, by compressing and folding, allowing for complex locomotion with only two actuators. Achievable motions include forward locomotion at 13 mm/s (4.3% of body length per second), turning at 9◦/s, and end-over-end flipping. Hard components, such as motors, are loosely sutured into cavities after molding. This reduces unwanted stiffening of the soft body. This work is the first demonstration of a soft open-cell foam robot locomoting with motor tendon actuators. The manufacturing method is rapid (~30 min per mold), inexpensive (under $3 per robot for the structural foam), and flexible, and will allow a variety of soft foam robotic devices to be produced.

This paper presents an advanced robust active disturbance rejection control (ADRC) for flexible link manipulator (FLM) to track desired trajectories in the joint space and minimize the link’s vibrations. It has been shown that the ADRC technique has a very good disturbance rejection capability. Both the internal dynamics and the external disturbances can be estimated and compensated in real time. The proposed robust ADRC control law is developed to solve the problems existing in the original version of the ADRC related to the disturbance estimation errors and the variation of the parameters. Indeed, these parameters cannot be included in the existing disturbances and then be estimated by the extended state observer. The proposed control law is based on the sliding mode technique, which considers the uncertainties in the control gains and disturbance estimation errors. Lyapunov theory is used to prove the closed-loop stability of the system. The proposed control strategy is simulated and tested experimentally on one FLM. The effect of the observer bandwidth on the system performance is simulated and studied to select the best values of the bandwidth frequency. The simulation and experimental results show that the proposed robust ADRC has better performance than the traditional ADRC.

In this paper, hybrid control of central pattern generators (CPGs), along with an adaptive supper-twisting sliding mode (ASTSM) control based on supper-twisting state observer, is proposed to guard against disturbances and uncertainties. Rhythmic and coordinated signals are generated using CPGs. In addition, to overcome the chattering of conventional sliding mode, supper-twisting sliding mode has been applied. The ASTSM method triggers sliding variables, and its derivatives tend to zero continuously in the presence of the uncertainties. Moreover, to acquire maximum stability, the desired trajectory of the upper limb based on zero moment point criterion is designed.

Steep slope vineyards are a complex scenario for the development of ground robots. Planning a safe robot trajectory is one of the biggest challenges in this scenario, characterized by irregular surfaces and strong slopes (more than 35°). Moving the robot through a pile of stones, spots with high slope or/and with wrong robot yaw may result in an abrupt fall of the robot, damaging the equipment and centenary vines, and sometimes imposing injuries to humans. This paper presents a novel approach for path planning aware of center of mass of the robot for application in sloppy terrains. Agricultural robotic path planning (AgRobPP) is a framework that considers the A* algorithm by expanding inner functions to deal with three main inputs: multi-layer occupation grid map, altitude map and robot’s center of mass. This multi-layer grid map is updated by obstacles taking into account the terrain slope and maximum robot posture. AgRobPP is also extended with algorithms for local trajectory replanning during the execution of a trajectory that is blocked by the presence of an obstacle, always assuring the safety of the re-planned path. AgRobPP has a novel PointCloud translator algorithm called PointCloud to grid map and digital elevation model (PC2GD), which extracts the occupation grid map and digital elevation model from a PointCloud. This can be used in AgRobPP core algorithms and farm management intelligent systems as well. AgRobPP algorithms demonstrate a great performance with the real data acquired from AgRob V16, a robotic platform developed for autonomous navigation in steep slope vineyards.

It is usually proposed to use a robotic manipulator for performing on-orbit capture of a target satellite in the planned active debris removal and on-orbit servicing missions. Control of the satellite-manipulator system is challenging because motion of the manipulator influences position and orientation of the chaser satellite. Moreover, the trajectory selected for the capture manoeuvre must be collision-free. In this article, we consider the case of a nonredundant manipulator mounted on a free-floating satellite.We propose to use the bi-directional rapidly-exploring random trees (RRT) algorithm to achieve two purposes: to plan a collision-free manipulator trajectory that, at the same time, will result in a desired change of the chaser satellite orientation. Several improvements are introduced in comparison to the previous applications of the RRT method for manipulator mounted on a free-floating satellite. Feasibility of the proposed approach is demonstrated in numerical simulations performed for the planar case in which the chaser satellite is equipped with a 2-DoF (Degree of Freedom) manipulator. The obtained results are analysed and compared with the results obtained from collision-free trajectory planning methods that do not allow to set the desired final orientation of the chaser satellite.

The aerial manipulator is a special and new type of flying robot composed of a rotorcraft unmanned aerial vehicle (UAV) and a/several manipulator/s. It has gained a lot of attention since its initial appearance in 2010. This is mainly because it enables traditional UAVs to conduct versatile manipulating tasks from air, considerably enriching their applications. In this survey, a complete and systematic review of related research on this topic is conducted. First, various types of structure designs of aerial manipulators are listed out. Subsequently, the modeling and control methods are introduced in detail from the perspective of two types of typical application cases: free-flight and motion-restricted operations. Finally, challenges for future research are presented.

The Inverse Kinematics (IK) problem of manipulators can be divided into two distinct steps: (1) Problem formulation, where the problem is developed into a form which can then be solved using various methods. (2) Problem solution, where the IK problem is actually solved by producing the values of different joint space variables (joint angles, joint velocities or joint accelerations). The main focus of this paper is concentrated on the discussion of the IK problem of redundant manipulators, formulated as a quadratic programming optimization problem solved by different kinds of recurrent neural networks.

Navigation and path analysis in a cluttered environment is a challenging task over the last few decades. In this paper, a behavior-based neural network (BNN) and reactive control architecture have been presented for navigation of the mobile robot. Two different reactive behaviors have been taken as inputs function. Obstacle position is the first reactive behavior given by u(o), whereas obstacle angle u(n) according to the target position is the second reactive behavior. The angular velocity and steering angle are the output of the controller. The backpropagation architecture reduces the errors of weight function and records the best weight data that match the BNN controller. Using the BNN algorithm, the robot reacts quickly as compared to other developed techniques. To validate the performance of the controller, simulation and experimental results have been compared in the common platforms. The deviation in results for both the scenarios is found to be within 10%. The results of the BNN algorithm have also been compared with other existing techniques. Effectiveness of the proposed technique is measured in terms of smoothness of the realistic path, collision point detection, path length, and performance time.

Interaction between a robot and its environment requires perception about the environment, which helps the robot in making a clear decision about the object type and its location. After that, the end effector will be brought to the object’s location for grasping. There are many research studies on the reaching and grasping of objects using different techniques and mechanisms for increasing accuracy and robustness during grasping and reaching tasks. Thus, this paper presents an extensive review of research directions and topics of different approaches such as sensing, learning and gripping, which have been implemented within the current five years.

There is a high demand for developing effective controllers to perform fast and accurate operations for either flexible link manipulators (FLMs) or rigid link manipulators (RLMs). Thus, this paper is beneficial for such vast field, and it is also advantageous and indispensable for researchers who are interested in robotics to have sufficient knowledge about various controllers of FLMs and RLMs as the controllers’ concepts are elaborated in detail. The paper concentrates in critically reviewing classical controllers, intelligent controllers, robust controllers, and hybrid controllers for both FLMs and RLMs. The advantages and disadvantages of the aforementioned control methods are summarized in this paper; it also has a detailed comparison for the controllers in terms of the design difficulty, performance, and the suitability for controlling FLMs or RLMs.