Under the coupling effect of node position deviation, joint clearance and wear factors, the complex landing gear retraction mechanism suffers from low kinematic accuracy, slow retraction performance and shortened reliable life. Addressing these issues, a time-dependent reliability analysis and optimisation design method for the kinematic accuracy of the retraction mechanism is proposed, considering the uncertainty of node position deviation, initial clearance, and dynamic multi-joint wear. Initially, a wear prediction model and a dynamic model of the retraction mechanism considering node position deviation and joint clearance are established to analyse their influence on retraction accuracy and joint wear depth. Subsequent retraction testing under various working conditions is conducted to ascertain the critical failure condition and validate the simulation model. The time-dependent kinematic accuracy reliability model, accounting for the dynamic evolution of wear clearance, is then established to assess reliability variation with retraction cycles. Finally, the reliability optimisation design focusing on hole-axis matching accuracy aims to strike a balance between accuracy cost and reliability, thereby enhancing performance and prolonging operational life.

Urban air mobility (UAM) utilising novel transportation tools is gradually being recognised as a significant means to alleviate ground transportation pressures, vertiports which serve as pivotal nodes in UAM require efficient methods for assessing its operational capacity to develop an appropriate operational strategy and help to design vertiport ground infrastructure scientifically. This study proposes a multi-dimensional assessment method for the capacity of vertiports considering throughput and quality of service based on genetic algorithm (CEGA). The method comprehensively considers constraints such as unmanned aerial vehicle (UAV) safety separation, battery endurance, number of landing vertipads and UAV speed. The experimental results indicate that the vertiport with the scheduling algorithm proposed by this study has a larger capacity and experiences fewer delay than the vertiport with first-come-first-served (FCFS) algorithm when the vertiport has the same limited number of vertipads. Different proportions of UAVs significantly affect the quality of service and the degree of operation delays. The weights of vertiport throughput and customer satisfaction are the parameters that represent the importance of throughput and customer satisfaction in the objective function of the capacity assessment model. When the weights of throughput and customer satisfaction are set to 0.8 and 0.2 respectively, the performance of this optimisation model is optimal. This study provides a novel solution for capacity assessment and operation scheduling of vertiports, laying the foundation for improving the efficiency of UAM operations.

We propose a hierarchical Bayesian model for analyzing multi-site experimental fMRI studies. Our method takes the hierarchical structure of the data (subjects are nested within sites, and there are multiple observations per subject) into account and allows for modeling between-site variation. Using posterior predictive model checking and model selection based on the deviance information criterion (DIC), we show that our model provides a good fit to the observed data by sharing information across the sites. We also propose a simple approach for evaluating the efficacy of the multi-site experiment by comparing the results to those that would be expected in hypothetical single-site experiments with the same sample size.

To meet the development needs of aeroengines for high thrust-to-weight ratios and fuel-air ratios, a high temperature rise triple-swirler main combustor was designed with a total fuel-air ratio of 0.037, utilising advanced technologies including staged combustion, multi-point injection and multi-inclined hole cooling. Fluent software was used to conduct numerical simulations under both takeoff and idle conditions, thereby obtaining the distribution characteristics of the velocity and temperature fields within the combustor, as well as the generation of pollutants. The simulation results indicate that under takeoff conditions, the high temperature rise triple-swirler combustor achieves a total pressure loss coefficient of less than 6% and a combustion efficiency exceeding 99%. Under takeoff conditions, the OTDF and RTDF values are 0.144 and 0.0738, respectively. The mole fraction of NOx emissions is 3,700ppm, while the mole fraction of soot emissions is 2.55×10−5ppm. Under idle conditions, the triple-swirler combustor maintains a total pressure loss coefficient of less than 6% and a combustion efficiency greater than 99.9%. The OTDF and RTDF values are 0.131 and 0.0624, respectively. The mole fractions of CO and UHC emissions are both 0×10−32ppm at the calculation limit of Fluent software.

We investigated the impact of COVID-19 restrictions on the duration of untreated psychosis (DUP). First-episode psychosis admissions (n = 101) to the STEP Clinic in Connecticut showed DUP reduction (P = 0.0015) during the pandemic, with the median reducing from 208 days pre-pandemic to 56 days in the early pandemic period, and subsequently increasing to 154 days (P = 0.0281). Time from psychosis onset to antipsychotic prescription decreased significantly in the pandemic (P = 0.0183), with the median falling from 117 to 35 days. This cohort study demonstrates an association between greater pandemic restrictions and marked DUP reduction, and provides insights for future early detection efforts.

The laboratory generation and diagnosis of uniform near-critical-density (NCD) plasmas play critical roles in various studies and applications, such as fusion science, high energy density physics, astrophysics as well as relativistic electron beam generation. Here we successfully generated the quasistatic NCD plasma sample by heating a low-density tri-cellulose acetate (TCA) foam with the high-power-laser-driven hohlraum radiation. The temperature of the hohlraum is determined to be 20 eV by analyzing the spectra obtained with the transmission grating spectrometer. The single-order diffraction grating was employed to eliminate the high-order disturbance. The temperature of the heated foam is determined to be T = 16.8 ± 1.1 eV by analyzing the high-resolution spectra obtained with a flat-field grating spectrometer. The electron density of the heated foam is about $N_e=4.0\pm 0.3\times {10}^{20}{\text{cm}}^{-3}$ under the reasonable assumption of constant mass density.

In preparation for an experiment with a laser-generated intense proton beam at the Laser Fusion Research Center at Mianyang to investigate the 11B(p,α)2α reaction, we performed a measurement at very low proton energy between 140 keV and 172 keV using the high-voltage platform at the Institute of Modern Physics, Lanzhou. The aim of the experiment was to test the ability to use CR-39 track detectors for cross-section measurements and to remeasure the cross-section of this reaction close to the first resonance using the thick target approach. We obtained the cross-section σ = 45.6 ± 12.5 mb near 156 keV. Our result confirms the feasibility of CR-39 type track detector for nuclear reaction measurement also in low-energy regions.

The formation of siderite and magnetite by Fe(III)-reducing bacteria may play an important role in C and Fe geochemistry in subsurface and ocean sediments. The objective of this study was to identify environmental factors that control the formation of siderite (FeCO3) and magnetite (Fe3O4) by Fe(III)-reducing bacteria. Psychrotolerant (<20°C), mesophilic (20–35°C) and thermophilic (>45°C) Fe(III)-reducing bacteria were used to examine the reduction of a poorly crystalline iron oxide, akaganeite (β-FeOOH), without a soluble electron shuttle, anthraquinone disulfuonate (AQDS), in the presence of N2, N2-CO2(80:20, V:V), H2 and H2-CO2 (80:20, V:V) headspace gases as well as in -buffered medium (30–210 mM) under a N2 atmosphere. Iron biomineralization was also examined under different growth conditions such as salinity, pH, incubation time, incubation temperature and electron donors. Magnetite formation was dominant under a N2 and a H2 atmosphere. Siderite formation was dominant under a H2-CO2 atmosphere. A mixture of magnetite and siderite was formed in the presence of a N2-CO2 headspace. Akaganeite was reduced and transformed to siderite and magnetite in a -buffered medium (>120 mM) with lactate as an electron donor in the presence of a N2 atmosphere. Biogeochemical and environmental factors controlling the phases of the secondary mineral suite include medium pH, salinity, electron donors, atmospheric composition and incubation time. These results indicate that microbial Fe(III) reduction may play an important role in Fe and C biogeochemistry as well as C sequestration in natural environments.

The third-order law links energy transfer rates in the inertial range of magneto- hydrodynamic (MHD) turbulence with third-order structure functions. Anisotropy, a typical property in the solar wind, challenges the applicability of the third-order law with the isotropic assumption. To shed light on the energy transfer process in the presence of anisotropy, we conducted direct numerical simulations of forced MHD turbulence with normal and hyper-viscosity under various strengths of the external magnetic field ($B_0$), and calculated three forms of third-order structure function with or without averaging of the azimuthal or polar angles with respect to $B_0$ direction. Correspondingly, three estimated energy transfer rates were obtained. The result shows that the peak of normalized third-order structure function occurs at larger scales closer to the $B_0$ direction, and the maximum of longitudinal transfer rates shifts away from the $B_0$ direction at larger $B_0$. Compared with normal viscous cases, hyper-viscous cases can attain better separated inertial range, thus facilitating the estimation of the energy cascade rates. We find that the widespread use of the isotropic form of the third-order law in estimating the energy transfer rates is questionable in some cases, especially when the anisotropy arising from the mean magnetic field is inevitable. In contrast, the direction-averaged third-order structure function properly accounts for the effect of anisotropy and predicts the energy transfer rates and inertial range accurately, even at very high $B_0$. With limited statistics, the third-order structure function shows a stronger dependence on averaging of azimuthal angles than the time, especially for high $B_0$ cases. These findings provide insights into the anisotropic effect on the estimation of energy transfer rates.

The boundary layer thickness on a compressor blade suction surface increases rapidly under a adverse pressure gradient and even separates from the blade surface. This paper proposes a novel method for developing the slot inside the blade, with the inlet of the slot located at the leading edge of the blade and the outlet located at the suction surface, using the momentum of the incoming flow to form a high velocity jet to control the boundary layer on the suction surface. For a plane cascade with a diffusion factor of 0.45, the effects of the main slot parametres (such as the shape of the slot and the positions of the slot inlet and outlet) on the flow in the slot, the flow field and the aerodynamic performance of the cascade were investigated with a numerical method. When the aerodynamic performance of cascades with slotted and unslotted blades was compared, it was found that a reasonable slot structure can effectively inhibit the development of the boundary layer on the blade suction surface and greatly improve the aerodynamic performance of the cascade. Based on the influence of the slot parametres of the above cascade, the slot of a plane cascade with a diffusion factor of 0.60 was designed. The numerical calculation results show that the slotted cascade with a diffusion factor of 0.60 outperformed the slotted cascade with a diffusion factor of 0.45. This result showed that the higher the cascade load, the greater the performance improvement from slotting. Furthermore, the unslotted and slotted cascades were tested, and the test results agreed well with the calculations. The aerodynamic performance of the slotted cascade was better than that of the unslotted cascade, which verifies the accuracy of the calculation method and the feasibility of blade slotting for suppressing the development of boundary layers on suction surfaces and reducing flow loss.

Background: Tuberculosis is an airborne disease caused by Mycobacterium Tuberculosis. Intracranial tuberculoma is a rare complication of extrapulmonary tuberculosis due to hematogenous spread to subpial and subependymal regions. Intracranial tuberculoma can occur with or without meningitis. Methods: A 3-year-old male who recently emigrated from Sudan presented to the emergency department with right-sided seizures lasting 30 minutes which were aborted with levetiracetam and midazolam. CT head revealed a multilobulated left supratentorial mass, with solid and cystic components measuring 8.0 x 4.8 x 6.5 cm. The patient had successful surgical resection of the mass which was positive for Mycobacterium Tuberculosis. He was started on rifampin, isoniazid, pyrazinamide, ethambutol, and fluoroquinolone and discharged home in stable condition. Results: Literature review on pediatric intracranial tuberculoma was performed which included 48 studies (n=49). The mean age was 8.8 ± 5.4 years with slight female predilection (59%). Predominant solitary tuberculomas (63%) were preferentially managed with both surgical resection and antitubercular therapy (ATT) compared to multifocal tuberculomas that were preferentially managed with ATT. Conclusions: Intracranial tuberculoma is a rare but treatable cause of space-occupying lesions in children. Clinicians should maintain high-level of suspicion in patients from endemic regions and involve infectious disease service early in patient’s care.

The physics of leading-edge vortex (LEV) stability on flapping wings and autorotating seeds is still underexplored due to its complex dependency on Reynolds number ($\textit {Re}$), aspect ratio (AR) and Rossby number (Ro). Our previous study observed an interesting dual-stage vortex tilting between radial and tangential components in a stable LEV. Here, the establishment of this novel mechanism, i.e. dual-stage radial–tangential vortex tilting (DS-VT$_{r-t}$), is investigated and explained in detail using numerical methods. The contributions of other tangential vorticity transport terms are also considered. It is shown that the stable LEV region coincides mostly with a constant ratio of tangential and radial vorticity components. The DS-VT$_{r-t}$ mechanism functions as a negative feedback loop for radial vorticity, thereby contributing to the LEV stability at $\textit {Re} > 500$. Specifically, this mechanism involves a dual-stage vortex tilting starting from negative radial component to positive tangential component, and then back to positive radial component, thereby leading to a $180^{\circ }$ reversal of radial vorticity. The radial Coriolis acceleration can also assist the DS-VT$_{r-t}$ by enhancing the tangential vorticity component and the reduction of radial vorticity inside the LEV via the second stage of DS-VT$_{r-t}$. The effects of $\textit {Re}$, AR and Ro on the constant radial–tangential vorticity ratio and DS-VT$_{r-t}$ are then analysed. The coupled effects of AR and Ro are separated into rotational effects and those of tip and root vortices. Our results establish an evident relationship among the LEV stability, the constant radial–tangential vorticity ratio, and the DS-VT$_{r-t}$, thereby deepening the understanding in the vorticity transport of LEV formation and stability.

OBJECTIVES/GOALS: Our long-term goal is to understand how both genetic and environmental (GxE) factors contribute to neurodevelopmental disorders (NDDs) so that we may potentially intervene in disease pathogenesis and design therapies to address functional deficiencies. METHODS/STUDY POPULATION: Our studies use a novel GxE model to determine how cephalosporin antibiotic exposure alters the gut microbiome, hippocampal neurogenesis, and behavior in the genetically vulnerable 16p11.2 microdeletion (16pDel) mouse. This mouse models one of the most frequently observed genetic risk variants implicated in NDDs, including ~1% of autism diagnoses. Wildtype and 16pDel littermates were exposed to saline or the cephalosporin, cefdinir, from postnatal days 5-9. We quantified changes in gut microbiota composition using 16S rRNA gene sequencing and utilized immunoblotting, immunohistochemistry, and bulk RNA gene sequencing to assess changes in hippocampal neurogenesis. An additional cohort of saline or cefdinir-exposed mice were subjected to a behavioral battery to assess changes in sociability and anxiety. RESULTS/ANTICIPATED RESULTS: We leveraged the next-generation microbiome bioinformatics platform, Quantitative Insights Into Microbial Ecology 2 (QIIME2) to analyze 16S rRNA gene sequencing datasets of P13 cecal samples from saline- and cefdinir-exposed mice. We found successful perturbations to the gut microbiome following early life cefdinir exposure. Further, we found a robust 50% reduction in hippocampal cyclin E protein in cefdinir-exposed 16pDel male mice, which was replicated in a second independent experiment. This reduction extended to the S-phase cell entry and general stem cell population, quantified by EdU+ and Ki67+ cell numbers, respectively. Lastly, in our first cohort of mice for behavioral studies, we found reduced sociability and increased anxiety-like behaviors in cefdinir-exposed mice. DISCUSSION/SIGNIFICANCE: The findings from this GxE model will provide mechanistic insights into the causes of NDDs; they may inform practice guidelines so as to reduce this environmental exposure; and may suggest interventions like probiotics for those at risk in order to overcome altered gut microbiome composition and restore hippocampal neurogenesis defects.

A relation among invariants of filtered velocity gradients with two different filter sizes is derived. Based on this relation and physical reasoning, it is shown analytically that strain self-amplification contributes more to energy transfer than vortex stretching in homogeneous turbulence, as observed in recent numerical investigations of homogeneous isotropic turbulence. We note that the invariant relation studied and hence the inequality between strain self-amplification and vortex stretching apply to all homogeneous flows, not restricted to isotropic turbulence.