Finger weeders were first developed in the 1950s and have since been widely adopted by farmers to improve physical weed control (PWC) within crop rows. Research on finger weeders has largely been comparative, with most studies identifying a top-performing weed control practice among various physical or chemical treatments. Weeding tool performance, however, is often highly variable, affected by tool design and adjustment, soil conditions, and both weed and crop species and size. Finger weeder operating settings have not been systematically tested to determine whether they could optimize tool performance. In this project, field and soil bin experiments examined the effects of finger weeder angle, spacing, and speed on weed control efficacy and weed/crop selectivity. Three finger weeder angles were tested: 108°, which removed soil near the crop; 90°, typical for most commercial tools; and 68°, which moved soil into the crop row. Three spacings and speeds were compared: fingers overlapping (−0.6 cm), touching (0 cm), or spaced apart (2.5 cm); and 4, 7, and 9 km h−1. In both the field and soil bin, finger weeders set at a 68° angle resulted in the greatest efficacy. Decreasing finger spacing and increasing speed improved efficacy in soil bin experiments, as expected, but spacing and speed effects were not detected in the field. The experimental soil bin system shows promise for PWC testing, possibly offering insights that could not be detected in more variable field conditions.

Two studies were conducted in 2022 and 2023 near Rocky Mount and Clayton, NC, to determine the optimal granular ammonium sulfate (AMS) rate and application timing for pyroxasulfone-coated AMS. In the rate study, AMS rates included 161, 214, 267, 321, 374, 428, and 481 kg ha−1, equivalent to 34, 45, 56, 67, 79, 90, and 101 kg N ha−1, respectively. All rates were coated with pyroxasulfone at 118 g ai ha−1 and topdressed onto 5- to 7-leaf cotton. In the timing study, pyroxasulfone (118 g ai ha−1) was coated on AMS and topdressed at 321 kg ha−1 (67 kg N ha−1) onto 5- to 7-leaf, 9- to 11-leaf, and first bloom cotton. In both studies, weed control and cotton tolerance to pyroxasulfone-coated AMS were compared to pyroxasulfone applied POST and POST-directed. The check in both studies received non-herbicide-treated AMS (321 kg ha−1). Before treatment applications, all plots (including the check) were maintained weed-free with glyphosate and glufosinate. In both studies, pyroxasulfone applied POST was most injurious (8% to 16%), while pyroxasulfone-coated AMS resulted in ≤4% injury. Additionally, no differences in cotton lint yield were observed in either study. With the exception of the lowest rate of AMS (161 kg ha−1; 79%), all AMS rates coated with pyroxasulfone controlled Palmer amaranth ≥83%, comparably to pyroxasulfone applied POST (92%) and POST-directed (89%). In the timing study, the application method did not affect Palmer amaranth control; however, applications made at the mid- and late timings outperformed early applications. These results indicate that pyroxasulfone-coated AMS can control Palmer amaranth comparably to pyroxasulfone applied POST and POST-directed, with minimal risk of cotton injury. However, the application timing could warrant additional treatment to achieve adequate late-season weed control.

An experiment was conducted in 2022 and 2023 near Rocky Mount and Clayton, NC, to evaluate residual herbicide-coated fertilizer for cotton tolerance and Palmer amaranth control. Treatments included acetochlor, atrazine, dimethenamid-P, diuron, flumioxazin, fluometuron, fluridone, fomesafen, linuron, metribuzin, pendimethalin, pyroxasulfone, pyroxasulfone + carfentrazone, S-metolachlor, and sulfentrazone. Each herbicide was individually coated on granular ammonium sulfate (AMS) and top-dressed at 321 kg ha−1 (67 kg N ha−1) onto 5- to 7-leaf cotton. The check plots received the equivalent rate of nonherbicide-treated AMS. Before top-dress, all plots (including the check) were treated with glyphosate and glufosinate to control previously emerged weeds. All herbicides except metribuzin resulted in transient cotton injury. Cotton response to metribuzin varied by year and location. In 2022, metribuzin caused 11% to 39% and 8% to 17% injury at the Clayton and Rocky Mount locations, respectively. In 2023, metribuzin caused 13% to 32% injury at Clayton and 73% to 84% injury at Rocky Mount. Pyroxasulfone (91%), pyroxasulfone + carfentrazone (89%), fomesafen (87%), fluridone (86%), flumioxazin (86%), and atrazine (85%) controlled Palmer amaranth ≥85%. Pendimethalin and fluometuron were the least effective treatments, resulting in 58% and 62% control, respectively. As anticipated, early season metribuzin injury translated into yield loss; plots treated with metribuzin yielded 640 kg ha−1 and were comparable to yields after linuron (790 kg ha−1) was used. These findings suggest that with the exception of metribuzin, residual herbicides coated onto AMS may be suitable and effective in cotton production, providing growers with additional modes of action for late-season control of multiple herbicide–resistant Palmer amaranth.

Flumioxazin and S-metolachlor are widely used in conventional sweetpotato production in North Carolina and other states; however, some growers have recently expressed concerns about potential effects of these herbicides on sweetpotato yield and quality. Previous research indicates that activated charcoal has the potential to reduce herbicide injury. Field studies were conducted in 2021 and 2022 to determine whether flumioxazin applied preplant and S-metolachlor applied before and after transplanting negatively affect sweetpotato yield and quality when activated charcoal is applied with transplant water. The studies evaluated five herbicide treatments and two activated charcoal treatments. Herbicide treatments included two flumioxazin rates, one S-metolachlor rate applied immediately before and immediately after transplanting, and no herbicide. Charcoal treatments consisted of activated charcoal applied at 9 kg ha−1, and no charcoal. No visual injury from herbicides or charcoal was observed. Likewise, no effect of herbicide or charcoal treatment on no. 1, marketable (sum of no. 1 and jumbo grades), or total yield (sum of canner, no. 1, and jumbo grades) was observed. Additionally, shape analysis conducted on calculated length-to-width ratio (LWR) for no. 1 sweetpotato roots found no effect from flumioxazin at either rate on sweetpotato root shape. However, both S-metolachlor treatments resulted in lower LWR of no. 1 sweetpotato roots in 2021. Results are consistent with prior research and indicate that flumioxazin and S-metolachlor are safe for continued use on sweetpotato at registered rates.

Field studies were conducted in North Carolina in 2018 and 2019 to determine sweetpotato tolerance to indaziflam and its effectiveness in controlling Palmer amaranth in sweetpotato. Treatments included indaziflam pre-transplant; 7 d after transplanting (DATr) or 14 DATr at 29, 44, 58, or 73 g ai ha−1; and checks (weedy and weed-free). Indaziflam applied postemergence caused transient foliar injury to sweetpotato. Indaziflam pretransplant caused less injury to sweetpotato than other application timings regardless of rate. Palmer amaranth control was greatest when indaziflam was applied pretransplant or 7 DATr. In a weed-free environment, sweetpotato marketable yield decreased as indaziflam application was delayed. No differences in storage root length to width ratio were observed.

Seed retention, and ultimately seed shatter, are extremely important for the efficacy of harvest weed seed control (HWSC) and are likely influenced by various agroecological and environmental factors. Field studies investigated seed-shattering phenology of 22 weed species across three soybean [Glycine max (L.) Merr.]-producing regions in the United States. We further evaluated the potential drivers of seed shatter in terms of weather conditions, growing degree days, and plant biomass. Based on the results, weather conditions had no consistent impact on weed seed shatter. However, there was a positive correlation between individual weed plant biomass and delayed weed seed–shattering rates during harvest. This work demonstrates that HWSC can potentially reduce weed seedbank inputs of plants that have escaped early-season management practices and retained seed through harvest. However, smaller individuals of plants within the same population that shatter seed before harvest pose a risk of escaping early-season management and HWSC.

The Wilkes Subglacial Basin in East Antarctica contains ice equivalent to 3–4 m of global mean sea level rise and is primarily drained by Cook Glacier. Of concern is that recent observations (since the 1970s) show an acceleration in ice speed over the grounding line of both the Eastern and Western portions of Cook Glacier. Here, we use a numerical ice-flow model (Úa) to simulate the instantaneous effects of observed changes at the terminus of Cook Glacier in order to understand the link between these changes and recently observed ice acceleration. Simulations suggest that the acceleration of Cook West was caused by a retreat in calving-front position in the 1970s, potentially enhanced by grounding-line retreat, while acceleration of Cook East was likely caused by ice-shelf thinning and grounding-line retreat in the mid-1990s. Moreover, we show that the instantaneous ice discharge at Cook East would increase by up to 85% if the whole ice shelf is removed and it ungrounds from a pinning point; and that the discharge at Cook West could increase by ~300% if its grounding line retreated by 10 km.

Potential effectiveness of harvest weed seed control (HWSC) systems depends upon seed shatter of the target weed species at crop maturity, enabling its collection and processing at crop harvest. However, seed retention likely is influenced by agroecological and environmental factors. In 2016 and 2017, we assessed seed-shatter phenology in 13 economically important broadleaf weed species in soybean [Glycine max (L.) Merr.] from crop physiological maturity to 4 wk after physiological maturity at multiple sites spread across 14 states in the southern, northern, and mid-Atlantic United States. Greater proportions of seeds were retained by weeds in southern latitudes and shatter rate increased at northern latitudes. Amaranthus spp. seed shatter was low (0% to 2%), whereas shatter varied widely in common ragweed (Ambrosia artemisiifolia L.) (2% to 90%) over the weeks following soybean physiological maturity. Overall, the broadleaf species studied shattered less than 10% of their seeds by soybean harvest. Our results suggest that some of the broadleaf species with greater seed retention rates in the weeks following soybean physiological maturity may be good candidates for HWSC.

Seed shatter is an important weediness trait on which the efficacy of harvest weed seed control (HWSC) depends. The level of seed shatter in a species is likely influenced by agroecological and environmental factors. In 2016 and 2017, we assessed seed shatter of eight economically important grass weed species in soybean [Glycine max (L.) Merr.] from crop physiological maturity to 4 wk after maturity at multiple sites spread across 11 states in the southern, northern, and mid-Atlantic United States. From soybean maturity to 4 wk after maturity, cumulative percent seed shatter was lowest in the southern U.S. regions and increased moving north through the states. At soybean maturity, the percent of seed shatter ranged from 1% to 70%. That range had shifted to 5% to 100% (mean: 42%) by 25 d after soybean maturity. There were considerable differences in seed-shatter onset and rate of progression between sites and years in some species that could impact their susceptibility to HWSC. Our results suggest that many summer annual grass species are likely not ideal candidates for HWSC, although HWSC could substantially reduce their seed output during certain years.

Turbulent fluxes make a substantial and growing contribution to the energy balance of ice surfaces globally, but are poorly constrained owing to challenges in estimating the aerodynamic roughness length (z0). Here, we used structure from motion (SfM) photogrammetry and terrestrial laser scanning (TLS) surveys to make plot-scale 2-D and 3-D microtopographic estimations of z0 and upscale these to map z0 across an ablating mountain glacier. At plot scales, we found spatial variability in z0 estimates of over two orders of magnitude with unpredictable z0 trajectories, even when classified into ice surface types. TLS-derived surface roughness exhibited strong relationships with plot-scale SfM z0 estimates. At the glacier scale, a consistent increase in z0 of ~0.1 mm d−1 was observed. Space-for-time substitution based on time since surface ice was exposed by snow melt confirmed this gradual increase in z0 over 60 d. These measurements permit us to propose a scale-dependent temporal z0 evolution model where unpredictable variability at the plot scale gives way to more predictable changes of z0 at the glacier scale. This model provides a critical step towards deriving spatially and temporally distributed representations of z0 that are currently lacking in the parameterisation of distributed glacier surface energy balance models.

In recent years, there has been increased use of dicamba due to the introduction of dicamba-resistant cotton and soybean in the United States. Therefore, there is a potential increase in off-target movement of dicamba and injury to sensitive crops. Flue-cured tobacco is extremely sensitive to auxin herbicides, particularly dicamba. In addition to yield loss, residue from drift or equipment contamination can have severe repercussions for the marketability of the crop. Studies were conducted in 2016, 2017, and 2018 in North Carolina to evaluate spray-tank cleanout efficiency of dicamba using various cleaning procedures. No difference in dicamba recovery was observed regardless of dicamba formulation and cleaning agent. Dicamba residue decreased with the number of rinses. There was no difference in dicamba residue recovered from the third rinse compared with residue from the tank after being refilled for subsequent tank use. Recovery ranged from 2% to 19% of the original concentration rate among the three rinses. Field studies were also conducted in 2018 to evaluate flue-cured tobacco response to reduced rates of dicamba ranging, from 1/5 to 1/10,000 of a labeled rate. Injury and yield reductions varied by environment and application timing. When exposed to 1/500 of a labeled rate at 7 and 11 wk after transplanting, tobacco injury ranged from 39% to 53% and 10% to 16% 24 days after application, respectively. The maximum yield reduction was 62%, with a 55% reduction in value when exposed to 112 g ha−1 of dicamba. Correlations showed significant relationships between crop injury assessment and yield and value reductions, with Pearson values ranging from 0.24 to 0.63. These data can provide guidance to growers and stakeholders and emphasize the need for diligent stewardship when using dicamba technology.

Currently, there are seven herbicides labeled for U.S. tobacco production; however, additional modes of action are greatly needed in order to reduce the risk of herbicide resistance. Field experiments were conducted at five locations during the 2017 and 2018 growing seasons to evaluate flue-cured tobacco tolerance to S-metolachlor applied pretransplanting incorporated (PTI) and pretransplanting (PRETR) at 1.07 (1×) and 2.14 (2×) kg ai ha−1. Severe injury was observed 6 wk after transplanting at the Whiteville environment in 2017 when S-metolachlor was applied PTI. End-of-season plant heights from PTI treatments at Whiteville were likewise reduced by 9% to 29% compared with nontreated controls, although cured leaf yield and value were reduced only when S-metolachlor was applied PTI at the 2× rate. Severe growth reduction was also observed at the Kinston location in 2018 where S-metolachlor was applied at the 2× rate. End-of-season plant heights were reduced 11% (PTI, 2×) and 20% (PRETR, 2×) compared with nontreated control plants. Cured leaf yield was reduced in Kinston when S-metolachlor was applied PRETR at the 2× rate; however, treatments did not impact cured leaf quality or value. Visual injury and reductions in stalk height, yield, quality, and value were not observed at the other three locations. Ultimately, it appears that injury potential from S-metolachlor is promoted by coarse soil texture and high early-season precipitation close to transplanting, both of which were documented at the Whiteville and Kinston locations. To reduce plant injury and the negative impacts to leaf yield and value, application rates lower than 1.07 kg ha−1 may be required in these scenarios.

Evolving conditions at the terminus of Thwaites Glacier will be important in determining the rate of its future sea-level contribution over the coming decades. Here, we use remote-sensing observations to investigate recent changes (2000–2018) in the structure and velocity of Thwaites Glacier and its floating tongue. We show that the main trunk of Thwaites Glacier has accelerated by 38% over this period, while its previously intact floating tongue has transitioned to a weaker mélange of fractured icebergs bounded by sea ice. However, the rate of structural weakening and acceleration was not uniform across the observational period and we identify two periods of rapid acceleration and structural weakening (2006–2012; 2016–2018), separated by a period of deceleration and re-advance of the structurally-intact shear margin boundary (2012–2015). The timing of these accelerations/decelerations strongly suggests a link to variable ocean forcing. The weakened tongue now has some dependency on landfast sea ice for structural integrity and is vulnerable to changes in landfast ice persistency. Future reductions in landfast sea ice could manifest from changes in climate and/or the imminent removal of the B-22A iceberg from the Thwaites embayment. Such changes could have important implications for the integrity of the ice tongue and future glacier discharge.

Here we use polarimetric measurements from an Autonomous phase-sensitive Radio-Echo Sounder (ApRES) to investigate ice fabric within Whillans Ice Stream, West Antarctica. The survey traverse is bounded at one end by the suture zone with the Mercer Ice Stream and at the other end by a basal ‘sticky spot’. Our data analysis employs a phase-based polarimetric coherence method to estimate horizontal ice fabric properties: the fabric orientation and the magnitude of the horizontal fabric asymmetry. We infer an azimuthal rotation in the prevailing horizontal c-axis between the near-surface (z ≈ 10–50 m) and deeper ice (z ≈ 170–360 m), with the near-surface orientated closer to perpendicular to flow and deeper ice closer to parallel. In the near-surface, the fabric asymmetry increases toward the center of Whillans Ice Stream which is consistent with the surface compression direction. By contrast, the fabric orientation in deeper ice is not aligned with the surface compression direction but is consistent with englacial ice reacting to longitudinal compression associated with basal resistance from the nearby sticky spot.

We apply two methods to estimate the 21-cm bispectrum from data taken within the Epoch of Reionisation (EoR) project of the Murchison Widefield Array (MWA). Using data acquired with the Phase II compact array allows a direct bispectrum estimate to be undertaken on the multiple redundantly spaced triangles of antenna tiles, as well as an estimate based on data gridded to the uv-plane. The direct and gridded bispectrum estimators are applied to 21 h of high-band (167–197 MHz; z = 6.2–7.5) data from the 2016 and 2017 observing seasons. Analytic predictions for the bispectrum bias and variance for point-source foregrounds are derived. We compare the output of these approaches, the foreground contribution to the signal, and future prospects for measuring the bispectra with redundant and non-redundant arrays. We find that some triangle configurations yield bispectrum estimates that are consistent with the expected noise level after 10 h, while equilateral configurations are strongly foreground-dominated. Careful choice of triangle configurations may be made to reduce foreground bias that hinders power spectrum estimators, and the 21-cm bispectrum may be accessible in less time than the 21-cm power spectrum for some wave modes, with detections in hundreds of hours.