A laser stripe sensor has two kinds of calibration methods. One is based on the homography model between the laser stripe plane and the image plane, which is called the one-step calibration method. The other is based on the simple triangular method, which is named as the two-step calibration method. However, the geometrical meaning of each element in the one-step calibration method is not clear as that in the two-step calibration method. A novel mathematical derivation is presented to reveal the geometrical meaning of each parameter in the one-step calibration method, and then the comparative study of the one-step calibration method and the two-step calibration method is completed and the intrinsic relationship is derived. What is more, a one-step calibration method is proposed with 7 independent parameters rather than 11 independent parameters. Experiments are conducted to verify the accuracy and robust of the proposed calibration method.

Additive manufacturing (AM) has transformed job shop production and catalysed the growth of Makerspaces, FabLabs, Hackspaces, and Repair Cafés. AM has enabled the handling and manufacturing of a wide variety of components, and its accessibility has enabled more individuals to make. While smaller than their production-scale counterparts, the objectives of minimizing technician overhead, capital expenditure, and job response time remain the same. The typical First-Come First-Serve (FCFS) operating model, while functional, is not necessarily the most efficient and makes responding to a-typical or urgent demand profiles difficult. This article reports a study that investigated how AM machines configured with Minimally Intelligent agents can support production in these environments. An agent-based model that simulated 5, 10, 15, and 20 AM machines operating a 9 am−5 pm pattern and experiencing a diverse non-repeating demand profile was developed. Machines were configured with minimal intelligence – FCFS, First-Response First-Serve (FRFS), Longest Print Time (LPT), Shortest Print Time (SPT), and Random Selection logics – that governed the selection of jobs from the job pool. A full factorial simulation totaling 15,629 configurations was run until convergence to a ranked list of production performance – min Job Time-in-System. Performance changed as much as 200%. Performant configurations featured a variety of logics, while the least performant were dominated by FCFS and LPT. All FCFS (a proxy for today’s operations) was one of the least performant configurations. The results provide an optimal set of logics and performance bands that can be used to justify capital expenditure and AM operations in Makerspaces.

Maintenance optimization is a process for improving the efficiency of maintenance strategies and activities, considering various aspects of the target system and components, such as the probabilities of system failures and the cost of repair and replacement of a failed component. The improvement of maintenance optimization algorithms generally requires information from various data sources. For example, it may require the system risk information derived from risk analysis tools or the residual lifetime of a component from fault prognosis tools. The requirements of data acquisition (DAQ) and aggregation pose new challenges for maintenance management systems (MMSs) that implement and use these maintenance optimization algorithms. This paper proposes a multiple aspects maintenance ontology-based framework to facilitate DAQ from MMSs, online monitoring systems, fault detection and discrimination tools, risk assessment tools, decision-making tools, and component identification tools, and accelerate the implementation and verification of contemporary maintenance optimization models and algorithms. The proposed framework consists of a multi-aspect maintenance ontology with critical information for maintenance optimization and application interfaces for collecting information from various data sources, such as fault prognosis tools, online monitoring tools, risk assessment tools, and decision-making algorithms. In addition, this paper proposes a heuristic method for integrating concepts and properties from other existing ontologies into the proposed framework when the existing ontology is not fully compatible with the ontology under construction. Finally, the paper verifies the proposed ontology framework using a feedwater system designed for nuclear power plants with valves and filters as the components under maintenance.

Recent advances in machine learning have enabled computers to converse with humans meaningfully. In this study, we propose using this technology to facilitate design conversations in large-scale urban development projects by creating chatbot systems that can automate and streamline information exchange between stakeholders and designers. To this end, we developed and evaluated a proof-of-concept chatbot system that can perform design conversations on a specific construction project and convert those conversations into a list of requirements. Next, in an experiment with 56 participants, we compared the chatbot system to a regular online survey, focusing on user satisfaction and the quality and quantity of collected information. The results revealed that, with regard to user satisfaction, the participants preferred the chatbot experience to a regular survey. However, we found that chatbot conversations produced more data than the survey, with a similar rate of novel ideas but fewer themes. Our findings provide robust evidence that chatbots can be effectively used for design discussions in large-scale design projects and offer a user-friendly experience that can help to engage people in the design process. Based on this evidence, by providing a space for meaningful conversations between stakeholders and expanding the reach of design projects, the use of chatbot systems in interactive design systems can potentially improve design processes and their outcomes.

The increase in Electrical and Electronic Equipment (EEE) usage in various sectors has given rise to repair and maintenance units. Disassembly of parts requires proper planning, which is done by the Disassembly Sequence Planning (DSP) process. Since the manual disassembly process has various time and labor restrictions, it requires proper planning. Effective disassembly planning methods can encourage the reuse and recycling sector, resulting in reduction of raw-materials mining. An efficient DSP can lower the time and cost consumption. To address the challenges in DSP, this research introduces an innovative framework based on Q-Learning (QL) within the domain of Reinforcement Learning (RL). Furthermore, an Enhanced Simulated Annealing (ESA) algorithm is introduced to improve the exploration and exploitation balance in the proposed RL framework. The proposed framework is extensively evaluated against state-of-the-art frameworks and benchmark algorithms using a diverse set of eight products as test cases. The findings reveal that the proposed framework outperforms benchmark algorithms and state-of-the-art frameworks in terms of time consumption, memory consumption, and solution optimality. Specifically, for complex large products, the proposed technique achieves a remarkable minimum reduction of 60% in time consumption and 30% in memory usage compared to other state-of-the-art techniques. Additionally, qualitative analysis demonstrates that the proposed approach generates sequences with high fitness values, indicating more stable and less time-consuming disassembles. The utilization of this framework allows for the realization of various real-world disassembly applications, thereby making a significant contribution to sustainable practices in EEE industries.