The objective of this study was to evaluate the effects of growth-regulating insecticides of synthetic (e.g., Certero 480 SC, Intrepid 240 SC, Match EC and Mimic 240 SC) and botanical origins (e.g., Azamax 1.2 EC, Agroneem 850 EC, Azact 2.4 EC and Fitoneem 850 EC) on the biological parameters and fertility life table of Spodoptera frugiperda (J.E. Smith) under laboratory conditions. Larvae were fed insecticides that were incorporated into artificial diets. To develop the fertility life table, the following biological parameters were evaluated: survival at 7 days after infestation (d.a.i) and survivorship at adult eclosion, duration of the neonate-to-adult eclosion period, larval and pupal weights and total fecundity (number of total eggs per female). The results indicated that S. frugiperda neonates surviving LC25 or LC50 concentrations of the evaluated insecticides showed longer larval and egg-to-adult periods, lower larval and pupal weights and reduced fecundity, when compared to the control treatment. Larvae exposed to Azamax at LC25 or LC50 concentrations showed the greatest increase in generation duration (75 d). In addition, S. frugiperda adults emerged from pupae when larvae reared on an artificial diet containing growth regulating insecticides of synthetic and botanical origins produced fewer females per female per generation (Ro). As well as, lower rates of natural population increase per day (rm) compared to insects fed the control diet. Our findings indicated that, neem-derived products and growth-regulating insecticides of synthetic origin may be employed within integrated management strategies that aim to keep populations of S. frugiperda below levels that cause economic damage. Similarly, they offer alternatives for insecticide resistance management programs.

Silvopastoral systems (SPSs) are sustainable alternatives for pasture intensification. Management practices such as thinning are options to diminish competition for resources between pasture and trees, ensuring appropriate forage production. The objective of this study was to evaluate the productive and nutritive traits of Piatã palisadegrass (Urochloa brizantha cv. BRS Piatã) after thinning the forest component of a SPS. Forage production and nutritive value, along with microclimate variables were assessed in a SPS and in an intensive system (INT) in São Carlos-SP, Brazil, from 2016 to 2018. The INT was a full sun pasture of Piatã palisadegrass, while the SPS was established with Piatã palisadegrass shaded by eucalyptus (Eucalyptus urograndis clone GG100) spaced 15 × 2 m but thinned to 15 × 4 m before the onset of the experiment. In the SPS, measurements were made under the tree row (SPS_1), 3.75-m (SPS_2), 7.5-m (SPS_3) and 11.25-m (SPS_4) distant from the North row. Forage accumulation in the two systems were similar, whereas the pre-grazing forage mass in most of the SPS positions were smaller than that of the INT during the autumn of 2017 and summer of 2018. Crude protein (CP) content was greater in the SPS than in the INT in most positions and seasons. Forage production was favoured by the thinning of the trees mainly in the seasons close to the event, while forage CP was consistently greater in the understory pasture. Thinning of trees in SPSs can be adopted to provide forage production similar to intensive pastures with higher protein content.

A group of intercompany job is constituted from the DSMs of the ASLs of Biella (BI), Novara (NO), VCO, Vercelli (VC) and of the Psychiatric Clinic of the AOU of Novara (NO) finalized to the definition of relief runs for the patients with Eating Disorders (ED). Currently they result active 2 ambulatory devoted to the ED near NO and VCO. In the AOU NO a collaboration is active with the dietology and a daily DH with activity of group for patient with different diagnoses. To Borgosesia (VC) a project of promotion and prevention it is active in the secondary (course of formation for teachers, job with the students) schools. In the DSM NO it is active a program of food education in the schools. Patients affections from ED currently in load: AOU NO 47 (2 AN Purging, 5 AN Restrictive, 2 BED, 20 Bulimia, 18 EDNOS); DSM NO 15 (7 AN, 5 Bulimia, 3 EDNOS); DSM VCO 27 (10 AN, 5 Bulimia, 12 EDNOS); DSM VC 21 (5 AN Purging, 1 AN Restrictive, 6 Bulimia, 9 EDNOS); DSM Arona (NO) 13 (4 AN, 9 Bulimia); DSM BI 20 (8 AN, 8 Bulimia, 4 EDNOS). In the last two years the followings have been effected refuges in Therapeutics Community specific (CT) for ED: 3 near the CT to Moncrivello (VC) and 1 near the CT to Cuasso al Monte (VA). Besides the structures of the DSM they are present associations of relatives and volunteers (informative counter).

Brain abscess is uncommon in paediatric population, but of clinical importance because of significant long-term morbidity and mortality. In this multicentre study, promoted by the Italian Society for Paediatric Infectious Diseases, we retrospectively collected patients aged 0–18 years, with a diagnosis of ‘brain abscess’. Seventy-nine children were included; the median age was 8·75 years. As predisposing factor, 44 children had preceding infections. The Gram-positive cocci were mostly isolated (27 cases). Sixty (76%) children underwent a surgical intervention. Intravenous antibiotic therapy was administered in all patients, then switched to oral treatment. Clinical sequelae were recorded in 31 (39·2%) children. Twenty-one of them had a single sequela, of which, the most represented, was epilepsy in nine of them. This study focus the attention on the need to have standardized national guidelines or adequate recommendations on type and duration of antibiotic treatment.

Knowledge on spatial variability of soil properties is useful for the rational use of inputs, as in the site specific application of lime and fertilizer. Crop-livestock-forest integrated systems (CLFIS) provide a strategy of sustainable agricultural production which integrates annual crops, trees and livestock activities on a same area and in the same season. Since the lime and fertilizer are key factors for the intensification of agricultural systems in acid-soil in the tropics, precision agriculture (PA) is the tool to improve the efficiency of use of these issues. The objective of this research was to map and evaluate the spatial variability of soil properties, liming and fertilizer need of a CLFIS. The field study was carried out in a 30 ha area at Embrapa Pecuária Sudeste in São Carlos, SP, Brazil. Soil samples were collected at 0–0.2 m depth, and each sample represented a paddock. The spatial variability of soil properties and site-specific liming and fertilizer needs were modeled using semi-variograms, the soil fertility information were modeled. Spatial variability soil properties and site specific liming and fertilizer need were modeled by kriging and inverse distance weighting (IDW) techniques. Another approach used was based on lime and fertilizer recommendation considering the paddocks as the minimum management unit. The results showed that geostatistics and GIS were useful tools for revealing soil spatial variability and supporting management strategies. Soil nutrients were used to classify the soil spatial distribution map and design site-specific lime and fertilizer application zones. Spatial analyses of crop needs and requirement can provide management tools for avoiding potential environmental problems, caused by unbalanced nutrient supplies.

The giant anteater Myrmecophaga tridactyla is categorized as Vulnerable on the IUCN Red List, and is extinct in several locations as a result of environmental pressures. We present the first records of the giant anteater in the largest continuous expanse of the Atlantic Forest biome, in southern Brazil, highlighting its occurrence in the highlands of the Serra do Mar mountain range. During a camera-trapping survey of medium and large mammals we obtained two records of the species, one in 2013 and the other in 2014. These records from dense rainforest highlands indicate the importance of this environment for the giant anteater and highlight these areas as possible foci for future studies of the species. In addition, we present a review of the species’ occurrence in protected areas in Brazil, to provide a resource for the conservation of this species and for future re-evaluations.

We have compiled a catalogue of H ii regions detected with the Murchison Widefield Array between 72 and 231 MHz. The multiple frequency bands provided by the Murchison Widefield Array allow us identify the characteristic spectrum generated by the thermal Bremsstrahlung process in H ii regions. We detect 306 H ii regions between 260° < l < 340° and report on the positions, sizes, peak, integrated flux density, and spectral indices of these H ii regions. By identifying the point at which H ii regions transition from the optically thin to thick regime, we derive the physical properties including the electron density, ionised gas mass, and ionising photon flux, towards 61 H ii regions. This catalogue of H ii regions represents the most extensive and uniform low frequency survey of H ii regions in the Galaxy to date.

We compare first-order (refractive) ionospheric effects seen by the MWA with the ionosphere as inferred from GPS data. The first-order ionosphere manifests itself as a bulk position shift of the observed sources across an MWA field of view. These effects can be computed from global ionosphere maps provided by GPS analysis centres, namely the CODE. However, for precision radio astronomy applications, data from local GPS networks needs to be incorporated into ionospheric modelling. For GPS observations, the ionospheric parameters are biased by GPS receiver instrument delays, among other effects, also known as receiver DCBs. The receiver DCBs need to be estimated for any non-CODE GPS station used for ionosphere modelling. In this work, single GPS station-based ionospheric modelling is performed at a time resolution of 10 min. Also the receiver DCBs are estimated for selected Geoscience Australia GPS receivers, located at Murchison Radio Observatory, Yarragadee, Mount Magnet and Wiluna. The ionospheric gradients estimated from GPS are compared with that inferred from MWA. The ionospheric gradients at all the GPS stations show a correlation with the gradients observed with the MWA. The ionosphere estimates obtained using GPS measurements show promise in terms of providing calibration information for the MWA.

GLEAM, the GaLactic and Extragalactic All-sky MWA survey, is a survey of the entire radio sky south of declination + 25° at frequencies between 72 and 231 MHz, made with the MWA using a drift scan method that makes efficient use of the MWA’s very large field-of-view. We present the observation details, imaging strategies, and theoretical sensitivity for GLEAM. The survey ran for two years, the first year using 40-kHz frequency resolution and 0.5-s time resolution; the second year using 10-kHz frequency resolution and 2 s time resolution. The resulting image resolution and sensitivity depends on observing frequency, sky pointing, and image weighting scheme. At 154 MHz, the image resolution is approximately 2.5 × 2.2/cos (δ + 26.7°) arcmin with sensitivity to structures up to ~ 10° in angular size. We provide tables to calculate the expected thermal noise for GLEAM mosaics depending on pointing and frequency and discuss limitations to achieving theoretical noise in Stokes I images. We discuss challenges, and their solutions, that arise for GLEAM including ionospheric effects on source positions and linearly polarised emission, and the instrumental polarisation effects inherent to the MWA’s primary beam.

The Murchison Widefield Array is a Square Kilometre Array Precursor. The telescope is located at the Murchison Radio–astronomy Observatory in Western Australia. The MWA consists of 4 096 dipoles arranged into 128 dual polarisation aperture arrays forming a connected element interferometer that cross-correlates signals from all 256 inputs. A hybrid approach to the correlation task is employed, with some processing stages being performed by bespoke hardware, based on Field Programmable Gate Arrays, and others by Graphics Processing Units housed in general purpose rack mounted servers. The correlation capability required is approximately 8 tera floating point operations per second. The MWA has commenced operations and the correlator is generating 8.3 TB day−1 of correlation products, that are subsequently transferred 700 km from the MRO to Perth (WA) in real-time for storage and offline processing. In this paper, we outline the correlator design, signal path, and processing elements and present the data format for the internal and external interfaces.

The Murchison Widefield Array is a new low-frequency interferometric radio telescope built in Western Australia at one of the locations of the future Square Kilometre Array. We describe the automated radio-frequency interference detection strategy implemented for the Murchison Widefield Array, which is based on the aoflagger platform, and present 72–231 MHz radio-frequency interference statistics from 10 observing nights. Radio-frequency interference detection removes 1.1% of the data. Radio-frequency interference from digital TV is observed 3% of the time due to occasional ionospheric or atmospheric propagation. After radio-frequency interference detection and excision, almost all data can be calibrated and imaged without further radio-frequency interference mitigation efforts, including observations within the FM and digital TV bands. The results are compared to a previously published Low-Frequency Array radio-frequency interference survey. The remote location of the Murchison Widefield Array results in a substantially cleaner radio-frequency interference environment compared to Low-Frequency Array’s radio environment, but adequate detection of radio-frequency interference is still required before data can be analysed. We include specific recommendations designed to make the Square Kilometre Array more robust to radio-frequency interference, including: the availability of sufficient computing power for radio-frequency interference detection; accounting for radio-frequency interference in the receiver design; a smooth band-pass response; and the capability of radio-frequency interference detection at high time and frequency resolution (second and kHz-scale respectively).

The science cases for incorporating high time resolution capabilities into modern radio telescopes are as numerous as they are compelling. Science targets range from exotic sources such as pulsars, to our Sun, to recently detected possible extragalactic bursts of radio emission, the so-called fast radio bursts (FRBs). Originally conceived purely as an imaging telescope, the initial design of the Murchison Widefield Array (MWA) did not include the ability to access high time and frequency resolution voltage data. However, the flexibility of the MWA’s software correlator allowed an off-the-shelf solution for adding this capability. This paper describes the system that records the 100 μs and 10 kHz resolution voltage data from the MWA. Example science applications, where this capability is critical, are presented, as well as accompanying commissioning results from this mode to demonstrate verification.

We present the results of an approximately 6 100 deg2 104–196 MHz radio sky survey performed with the Murchison Widefield Array during instrument commissioning between 2012 September and 2012 December: the MWACS. The data were taken as meridian drift scans with two different 32-antenna sub-arrays that were available during the commissioning period. The survey covers approximately 20.5 h < RA < 8.5 h, − 58° < Dec < −14°over three frequency bands centred on 119, 150 and 180 MHz, with image resolutions of 6–3 arcmin. The catalogue has 3 arcmin angular resolution and a typical noise level of 40 mJy beam− 1, with reduced sensitivity near the field boundaries and bright sources. We describe the data reduction strategy, based upon mosaicked snapshots, flux density calibration, and source-finding method. We present a catalogue of flux density and spectral index measurements for 14 110 sources, extracted from the mosaic, 1 247 of which are sub-components of complexes of sources.

Significant new opportunities for astrophysics and cosmology have been identified at low radio frequencies. The Murchison Widefield Array is the first telescope in the southern hemisphere designed specifically to explore the low-frequency astronomical sky between 80 and 300 MHz with arcminute angular resolution and high survey efficiency. The telescope will enable new advances along four key science themes, including searching for redshifted 21-cm emission from the EoR in the early Universe; Galactic and extragalactic all-sky southern hemisphere surveys; time-domain astrophysics; and solar, heliospheric, and ionospheric science and space weather. The Murchison Widefield Array is located in Western Australia at the site of the planned Square Kilometre Array (SKA) low-band telescope and is the only low-frequency SKA precursor facility. In this paper, we review the performance properties of the Murchison Widefield Array and describe its primary scientific objectives.

The Murchison Widefield Array (MWA) is one of three Square Kilometre Array Precursor telescopes and is located at the Murchison Radio-astronomy Observatory in the Murchison Shire of the mid-west of Western Australia, a location chosen for its extremely low levels of radio frequency interference. The MWA operates at low radio frequencies, 80–300 MHz, with a processed bandwidth of 30.72 MHz for both linear polarisations, and consists of 128 aperture arrays (known as tiles) distributed over a ~3-km diameter area. Novel hybrid hardware/software correlation and a real-time imaging and calibration systems comprise the MWA signal processing backend. In this paper, the as-built MWA is described both at a system and sub-system level, the expected performance of the array is presented, and the science goals of the instrument are summarised.

Classical molecular dynamics (MD) simulations in conjunction with opticalabsorption and AFM/nano-Raman experiments are employed to relate themolecular-scale arrangement and conjugation of poly-3-hexylthiophene (P3HT)adsorbed onto single-walled carbon nanotubes (SWNTs) and multi-walled carbonnanotubes (MWNTs). Taken together our results demonstrate the templatingrole of carbon nanotubes in increasing the π-conjugation length of the P3HTat the P3HT/carbon nanotube interface. The MD simulations show that SWNTsand MWNTs, due to their inherent 1-dimensional (1D) cylindrical shape andπ-conjugation, planarize the P3HT molecules adsorbed at their surface andthus quench their torsional disorder, regardless of the P3HT conformationand nanotube chirality. This effect is more significant for higher SWNTweight fractions in the sample (since it is an interface effect). Weinvestigated this effect experimentally by acquiring nano-Raman spectra inregions of high-MWNT/low-P3HT content in addition to optical absorptionspectra of P3HT-SWNT composites with different SWNT concentrations . Theincrease in the P3HT conjugation is confirmed by a shift of a P3HT featurein the Raman spectrum when going from P3HT-rich to SWNT-rich areas in themixture. The significance of this work for charge transfer at the P3HT-SWNTinterface in bulk-heterojunction solar cells is discussed.

Large millimetric and submillimetric telescopes can play a crucialrole in our understanding of the Universe, allowing the directmeasurement of early galaxies or the investigation of the earlieststages of star formation. The B modes of CMB polarization are adirect probe of the Inflationary epoch and their measurementpromises to provide information on the scale of energies at whichthe process took place. For these investigations (and manyothers), large detectors arrays with thousands of pixels areneeded, to achieve high mapping speeds. This is especially true inthe case of mm and sub/mm observations from extremely cold and drylocations like Dome-C, where ultra-low temperature detectors,reaching photon noise limited performance, are needed to fullyexploit the excellent quality of the site. In this paper wepresent the working principle of the Microwave Kinetic InductanceDetectors and their status of development in Italy, focusing onthe key aspects that make them ideal for large arrays of sensors.