The whitefly Bemisia tabaci (Hemiptera: Aleyrodidae) is economically one of the most threatening pests in tomato cultivation, which not only causes direct damage but also transmits many viruses. Breeding whitefly-resistant tomato varieties is a promising and environmentally friendly method to control whitefly populations in the field. Accumulating evidence from tomato and other model systems demonstrates that flavonoids contribute to plant resistance to herbivorous insects. Previously, we found that high flavonoid-producing tomato line deterred whitefly oviposition and settling behaviours, and was more resistant to whiteflies compared to the near-isogenic low flavonoid-producing tomato line. The objective of the current work is to describe in detail different aspects of the interaction between the whitefly and two tomato lines, including biochemical processes involved. Electrical penetration graph recordings showed that high flavonoid-producing tomato reduced whitefly probing and phloem-feeding efficiency. We also studied constitutive and induced plant defence responses and found that whitefly induced stronger reactive oxygen species accumulation through NADPH oxidase in high flavonoid-producing tomato than in low flavonoid-producing tomato. Moreover, whitefly feeding induced the expression of callose synthase genes and resulted in callose deposition in the sieve elements in high flavonoid-producing tomato but not in low flavonoid-producing tomato. As a consequence, whitefly feeding on high flavonoid-producing tomato significantly decreased uptake of phloem and reduced its performance when compared to low flavonoid-producing tomato. These results indicate that high flavonoid-producing tomato provides phloem-based resistance against whitefly infestation and that the breeding of such resistance in new varieties could enhance whitefly management.

We identify a new mechanism of opportunistic insider trading linked to attention-driven mispricing. Insiders are more likely to sell their company’s stock during periods of heightened retail attention and more inclined to buy when attention diminishes. The results are particularly pronounced for lottery-type stocks and firms with substantial retail ownership. We demonstrate that our findings—which relate to indicators of mispricing, retail order imbalances, and Robinhood herding episodes—extend to seasoned equity issuances and cannot be solely explained by firm fundamentals. Attention-based insider trading is less likely to result in SEC enforcement actions and persists across different regulatory regimes.

In this paper, we simulate the process of two-dimensional axisymmetric fluid–structure coupling of a droplet impacting on a flexible disk. The effects of dimensionless disk stiffness (K = 0.1–1000), Weber number (We = 1–500) and contact angle (θ = 130° and 60°) on the dynamics of the droplet impacting on the flexible disk are analysed. The results indicate that there are five typical impact modes for a hydrophobic surface (θ = 130°) and four typical impact modes for a hydrophilic surface (θ = 60°) within the range of considered parameters. The analysis of spreading factor reveals that a part of the energy is transferred to the substrate, which is manifested as a weakening of the droplet spreading, when the substrate deforms downwards due to the droplet impact; the squeezing of the droplet causes a tendency to flow from the centre of the droplet to the edge, which is manifested as an enhancement of the droplet spreading, when the substrate recovers from the downward deformation. The effect of the substrate flexibility on the maximum spreading factor depends on the competition of the two mechanisms above. Based on this, a modified scaling law of βmax has been proposed by introducing the effective Weber number (Wem). The analysis of impact force demonstrates that the peak of the impact force is related to the deflection of the flexible substrate which is different from that of a rigid wall; and three typical processes of impact force variation have been summarised. In addition, unlike the rigid substrate scenario, there is an energy interaction between the droplet and the flexible substrate after impact occurs, which is classified as three typical energy transformation processes.

Modern fluvial sediments provide important information about source-to-sink process and regional tectono-magmatic events in the source area, but many factors, e.g., chemical weathering, sedimentary cycles and source-rock types, can interfere with the establishment of the source-sink system. The Lalin River (LR) and the Jilin Songhua River (JSR) are two important tributaries of the Songhua River in the Songnen Plain in NE China. They have similar flow direction, topography and identical climate backgrounds, but have notably different parent-rock types in the headwater, which provides an opportunity to explore the influencing factors of river sediment composition. To this end, the point bar sediments in the two rivers were sampled for an analysis of geochemistry (including element and Sr-Nd isotopic ratios), heavy mineral and detrital zircon U-Pb dating. The results are indicative of the fact that the two rivers have the similar geochemical composition (e.g., elements and Sr isotopes) as well as chemical weathering (CIA = 51.41–57.60, CIW = 59.68–66.11, PIA = 51.95–60.23, WIP = 56.00–65.47, Rb/Sr = 0.38–0.42) and recycling (SiO2/Al2O3 = 5.79 and 5.03, ICV = 1.0 and 1.2, CIA/WIP = 0.81–1.03) characteristics, showing a major control of climate on the low-level weathering and recycling of the river sediments. However, there are significant differences in the detrital zircon U-Pb age (a significant Mesozoic age peak for the LR but an additional Precambrian peak for the JSR), Nd isotope ratio (−6.2812–8.5830 and −8.1149–10.2411 for the LR and the JSR, respectively) and to a certain extent heavy mineral composition (e.g., for the < 63 μm fraction, a dominance of hornblende and magnetite in the LR, but haematite-limonite in the JSR) in the two river sediments, indicating that source rocks largely control the composition of the river sediments. Some of the major tectono-magmatic events (e.g., crustal growth and cratonisation of the North China Craton, closure of the Paleo-Asian Ocean, subduction and rollback of the Paleo-Pacific plate) occurring in the eastern Songnen Plain are well documented in the JSR sediments but not in the LR, the difference of which is largely regulated by the source rocks in the source area.

The seminal Bolgiano–Obukhov (BO) theory established the fundamental framework for turbulent mixing and energy transfer in stably stratified fluids. However, the presence of BO scalings remains debatable despite their being observed in stably stratified atmospheric layers and convective turbulence. In this study, we performed precise temperature measurements with 51 high-resolution loggers above the seafloor for 46 h on the continental shelf of the northern South China Sea. The temperature observation exhibits three layers with increasing distance from the seafloor: the bottom mixed layer (BML), the mixing zone and the internal wave zone. A BO-like scaling $\alpha =-1.34\pm 0.10$ is observed in the temperature spectrum when the BML is in a weakly stable stratified ($N\sim 0.0018$ rad s$^{-1}$) and strongly sheared ($Ri\sim 0.0027$) condition, whereas in the unstably stratified convective turbulence of the BML, the scaling $\alpha =-1.76\pm 0.10$ clearly deviated from the BO theory but approached the classical $-$5/3 scaling in isotropic turbulence. This suggests that the convective turbulence is not the promise of BO scaling. In the mixing zone, where internal waves alternately interact with the BML, the scaling follows the Kolmogorov scaling. In the internal wave zone, the scaling $\alpha =-2.12 \pm 0.15$ is observed in the turbulence range and possible mechanisms are provided.

During the investigation of parasitic pathogens of Mytilus coruscus, infection of a Perkinsus-like protozoan parasite was detected by alternative Ray's Fluid Thioglycolate Medium (ARFTM). The diameter of hypnospores or prezoosporangia was 8–27 (15.6 ± 4.0, n = 111) μm. The prevalence of the Perkinsus-like species in M. coruscus was 25 and 12.5% using ARFTM and PCR, respectively. The ITS1-5.8S-ITS2 fragments amplified by PCR assay had 100% homology to that of P. beihaiensis, suggesting that the protozoan parasite was P. beihaisensis and M. coruscus was its new host in East China Sea (ECS). Histological analysis showed the presence of trophozoites of P. beihaiensis in gill, mantle and visceral mass, and the schizonts only found in visceral mass. Perkinsus beihaiensis infection led to inflammatory reaction of hemocyte and the destruction of digestive tubules in visceral mass, which had negative effect on health of the farmed M. coruscus and it deserves more attention.

This paper presents an eight wire-driven parallel robot (WDPR-8) designed to serve as a suspension manipulator for aircraft models during wind tunnel testing. The precision of these tests is significantly influenced by the system’s stability and workspace, both of which are shaped by the geometric configuration of the structure and the tension in the wires. To acquire the efficiency principle of the suspension scheme design for the model, a kinematics model for a WDPR-8 was established. Based on the kinematics model, the stiffness of a WDPR-8 was theoretically studied, and the analytical expression of stiffness matrix of a WDPR was deduced. The stiffness matrix was composed of two terms, one of which is determined by the configuration of suspension system and the other term is determined by the wire tension. Based on the analysis result, a set of suspension scheme was discussed under the calculation of stiffness matrix and workspace analysis. In the discussion process, in addition to the stiffness-maximum calculation, another criterion as force closure is presented, which is useful for increasing the stiffness and workspace of the robot. Finally, a prototype was established according to the analysis result, and the workspace experiments are conducted. Test results indicate that the workspace meets the design requirements, validating the system suspension design method of a WDPR for aircraft model suspension in wind tunnel test considering of the systematic stiffness and workspace.

Genes involved in melanin production directly impact insect pigmentation and can affect diverse physiology and behaviours. The role these genes have on sex behaviour, however, is unclear. In the present study, the crucial melanin pigment gene black was functionally characterised in an urban pest, the German cockroach, Blattella germanica. RNAi knockdown of B. germanica black (Bgblack) had no effect on survival, but did result in black pigmentation of the thoraxes, abdomens, heads, wings, legs, antennae, and cerci due to cuticular accumulation of melanin. Sex-specific variation in the pigmentation pattern was apparent, with females exhibiting darker coloration on the abdomen and thorax than males. Bgblack knockdown also resulted in wing deformation and negatively impacted the contact sex pheromone-based courtship behaviour of males. This study provides evidence for black function in multiple aspects of B. germanica biology and opens new avenues of exploration for novel pest control strategies.

Accurately predicting neurosyphilis prior to a lumbar puncture (LP) is critical for the prompt management of neurosyphilis. However, a valid and reliable model for this purpose is still lacking. This study aimed to develop a nomogram for the accurate identification of neurosyphilis in patients with syphilis. The training cohort included 9,504 syphilis patients who underwent initial neurosyphilis evaluation between 2009 and 2020, while the validation cohort comprised 526 patients whose data were prospectively collected from January 2021 to September 2021. Neurosyphilis was observed in 35.8% (3,400/9,504) of the training cohort and 37.6% (198/526) of the validation cohort. The nomogram incorporated factors such as age, male gender, neurological and psychiatric symptoms, serum RPR, a mucous plaque of the larynx and nose, a history of other STD infections, and co-diabetes. The model exhibited good performance with concordance indexes of 0.84 (95% CI, 0.83–0.85) and 0.82 (95% CI, 0.78–0.86) in the training and validation cohorts, respectively, along with well-fitted calibration curves. This study developed a precise nomogram to predict neurosyphilis risk in syphilis patients, with potential implications for early detection prior to an LP.

While previous research has identified the performance implications of leaders’ positive implicit followership theories (IFTs, i.e., personal expectations regarding followers’ positive characteristics), this study focuses on the effect of leader–follower congruence in positive IFTs on followers’ job performance. To test our predictions, we conducted two complementary studies. The results of Study 1 (an experiment, N = 200) show that leader–follower congruence (versus incongruence) in positive IFTs is positively related to followers’ relational identification with the leader, which, in turn, is positively related to followers’ job performance. Moreover, followers’ uncertainty avoidance strengthens this relationship. These findings were replicated in Study 2 (a three-wave survey, N = 223) through polynomial regression and response surface analysis. This study improves our understanding of IFTs by showing that leader–follower congruence in this domain is related to followers’ outcomes.

Flexible cables in cable-driven parallel robots (CDPRs) are easy to be excited and vibrate. Cable vibration will react on the end-effector, causing attitude deviation of the end-effector. The main objective of this study is to accurately model axially moving flexible cables and characterize the dynamic behaviors of associated compliant CDPRs. Firstly, a model for transverse vibration of the axially moving length-variable cable is developed. On this basis, an original nonlinear dynamic model of the CDPRs able to capture the vibration of the cables and the dynamics of the end-effector is proposed. Secondly, the frequency–amplitude relationship of the CDPR is obtained. Moreover, the significance of the excitation effect caused by the axially moving length-variable cables is demonstrated, by comparing the results with and without excitation effect at different frequencies. It turns out that, as the oscillation frequency of the end-effector increases, the end-effector and cables exhibit the dynamics process from steady state to unstable large-amplitude vibration and finally to stable small-amplitude vibration. This indicates that the dynamics of the CDPR exhibit non-linear characteristics, due to the influence of flexible cables. Finally, the proposed dynamic model of compliant CDPRs is validated by experiments performed in the laboratory.

Objectives: Rapid and accurate screening for carbapenemase-producing organism (CPOs) in hospitalized patients is critical for infection control and prevention. The Xpert Carba-R assay is designed for rapid detection of CPOs, but 1 assay is usually conducted for only 1 sample. We evaluated a pooling strategy for CPO screening using the Xpert Carba-R assay. Methods: Swab sets containing 2 swabs were collected from 415 unique patients at Peking University People’s Hospital. One swab was used for the pooling test, in which 5 swabs from different patients were mixed in 1 sample treatment solution. The prevalence of CPOs in the hospital (5.3%) predicted that 5:1 pooling was most economical. As the reference method, the other swab was tested by culture using sequencing. Results: Of 415 samples, 383 were CPO negative using the pooling test strategy and 31 were positive. All samples that were negative by pooling were negative by culture and sequencing. Among the 31 positive samples identified by the pooling strategy, 26 were positive by culture and sequencing (including 24 samples with 1 targeted gene and 2 samples with double targeted genes, 1 NDM+/IMP+ and 1 VIM+/IMP+), and 5 were negative. Overall, 198 tests were conducted in the study, and 217 were saved compared with testing individually. The efficiency of the pooling strategy was 215%. The overall sensitivity was 1 (95% CI, 0.840–1), the specificity was 0.987 (95% CI, 0.968–0.995), the accuracy was 0.987 (95% CI, 0.970–0.996), positive predictive value was 0.838 (95% CI, 0.655–0.939), and the negative predictive value was 1 (95% CI, 0.988–1). Conclusions: The pooling strategy using the Xpert Carba-R assay showed good potential in screening CPO with good sensitivity and a significantly lower cost.

It has been acknowledged that the Doppler is beneficial to the GNSS positioning of smartphones. However, analysis of Doppler precision on smartphones is insufficient. In this paper, we focus on the characteristic analysis of the raw Doppler measurement from Android smartphones. A comprehensive investigation of the Doppler was conducted. The results illustrate that the availability of Doppler is stable and higher than that of carrier measurements, which means that the Doppler-smoothed code (DSC) method is more effective. However, there is a constant bias between the Doppler and the code rate in Xiaomi MI8, which indicates that extra processing of the DSC method is necessary for this phone. Additionally, it is demonstrated that the relationship between the Doppler and C/N0 can be expressed as an exponential function, and the fitting parameters are provided. The numerical experiment in car-borne and hand-held scenes was conducted for evaluating the performance of the Doppler-aided positioning algorithm. For positioning, the improvement reaches 37 ⋅ 69%/37 ⋅ 14%/26 ⋅ 61% in the east, north and up components, respectively, after applying the Doppler aiding. For velocity estimation, the improvement reaches 29 ⋅ 62%/39 ⋅ 63%/29 ⋅ 37% in the three components, respectively.

The carbonate-hosted Pb–Zn deposits in the Sichuan–Yunnan–Guizhou (SYG) triangle region are important Indosinian deposits in South China. The Tianbaoshan deposit is a typical large Pb–Zn deposit in the SYG area and occurs as pipe-like type, hosted by Sinian dolostone. It contains ∼26 Mt Zn–Pb ore (7.76–10.09 % Zn, 1.28–1.50 % Pb and 93.6 g t−1 Ag) and >0.1 Mt Cu ore (2.55 % Cu). In this study, the detailed mineral textures, mineral chemical and sulphur isotopic compositions of the various sulphides have been analysed to constrain the abnormal enrichment mechanism and mineralization relationship. Four mineralization stages have been recognized: Stage 1, minor early pyrite (Py1) with relics and infill of intergranular dolomite or quartz grains; Stage 2, Cu mineralization with coarse-grained, elliptical crystal chalcopyrite (Cp1); (3) Stage 3, Zn mineralization with dark fine-grained sphalerite (Sph1) and light coarse-grained sphalerite (Sph2); and (4) Stage 4, as represented by a quartz–calcite assemblage with galena, minor pyrite (Py2) and chalcopyrite (Cp2). The petrography of the sulphide minerals (Py1, Cp1, Sph1 and Sph2) demonstrates a mutual inclusion relationship. The nature of this relationship from core to rim and their similar sulphur isotope values (5.5–8.3 ‰) indicates a single sulphur source, suggesting that the different mineralization types are the result of different stages of a continuous hydrothermal system. Sphalerite geothermometer study suggests that sphalerite in the Tianbaoshan deposit formed in a low-temperature (<200 °C) hydrothermal system. The low concentrations of Mn and In, low In/Ge ratios and high Fe/Cd ratios in the sphalerite are consistent with those of Mississippi Valley-type (MVT) deposits, but different from those of magmatism-related deposits (e.g. epithermal, skarn and VMS deposits). The positive δ34S values for Py1 (5.1–7.9 ‰), Cp1 (5.1–7.2 ‰), Sph1 (4.7–7.4 ‰), Sph2 (3.9–8.7 ‰), Py2 (4.4–9.3 ‰) and Cp2 (5.0–6.8 ‰) indicate a sulphur source from thermochemical reduction of coeval seawater sulphate. Widely developed dissolved textures (caverns and breccias) with massive sulphide infillings and deformed host rock remnants suggest that replacement of host dolostones by ore fluids was volumetrically significant and the ore formed nearly simultaneously with the cavities. The Tianbaoshan deposit is a typical MVT deposit, which resulted from mixing of a H2S-rich fluid and a metal-rich fluid, with thermochemical sulphate reduction occurring before ore precipitation rather than during ore precipitation.

This study aimed to analyze the clinical effects of microdissection testicular sperm extraction (micro-TESE) surgery combined with an intracytoplasmic sperm injection (ICSI) regimen in the treatment of non-obstructive azoospermia (NOA) patients with different etiologies. In total, 128 NOA patients participated in this study, in which they received infertility treatment by micro-TESE surgery combined with an ICSI regimen, and all patients were divided into three groups [the Klinefelter syndrome (KS), the idiopathic and the secondary NOA groups]. In addition, the sperm retrieval rate (SRR), fertilization rate, embryo development status and clinical treatment effects were analyzed. Among the 128 NOA patients, the SRR of KS NOA patients was 48.65%, those of idiopathic and the secondary patients were 33.82% and 73.91%, respectively. Regardless of etiologies, there was no correlation with age, hormone value or testicular volume. Further analysis showed that the SRR of the KS group was positively related with testosterone (T) values, and the SRR of the secondary group had a positive relationship with follicle-stimulating hormone or luteinizing hormone values. In the subsequent clinical treatment, the retrieved sperm was subjected to ICSI and achieved good treatment effects, especially in the secondary group, and the implantation rate (55.56%) and clinical pregnancy rate (68.42%) were both higher than those of the idiopathic group (28.75% and 40.00%) and KS group (22.05% and 30.77%). Micro-TESE surgery combined with ICSI insemination is the most effective treatment regimen for NOA patients. The SRR of NOA patients with different etiologies are related to certain specific factors, and micro-TESE surgery seems to be the ideal and only way to have biological children.

Copy number variation (CNV) is a very common type of gene variation with high frequency. In recent years, CNV has been paid more attention in various fields, especially in livestock and poultry breeding, which has promoted the progress of breeding. WW domain binding protein 1-like (WBP1L) is a protein coding gene, which plays an important role in cattle populations, and its function has been extensively studied, but it is not clear whether the copy number of the gene can affect the growth and development of cattle populations. In this study, CNV of WBP1L gene was detected in 732 cattle of seven breeds (Qinchuan cattle, QC; Pinan cattle, PN; Yuengling cattle, YL; Xianan cattle, XN; Jiaxian cattle, JX; natural Guyuan cattle, NGY; Jian cattle, JA). In addition, the relationship between CNV and growth phenotype of cattle was studied. The experimental data indicate that the copy number of WBP1L was obviously correlated with heart girth of PN cattle (**P < 0.01), rump length (RL) and body weight (BW) of PN cattle (*P < 0.05), withers height (WH), RL, body length, chest depth and BW of JX cattle (*P < 0.05), WH of NGY cattle (*P < 0.05) and WH of JA cattle (*P < 0.05). It was proved that CNV of WBP1L gene could be used as molecular marker locus for genetic breeding of the above four cattle breeds.

Previous literature finds anomalies are at least as prevalent in developed markets as in emerging markets; namely, the global anomaly puzzle. We show that while market development and information diffusion are linearly related, information diffusion has a nonlinear impact on anomalies. This is consistent with theoretical developments concerning the process of information diffusion. In extremely low-efficiency regimes, without newswatchers sowing the seeds of price discovery and ensuring the long-run convergence of price to fundamentals, initial mispricing and subsequent correction will not occur. The concentration of emerging countries in low-efficiency regimes provides an explanation to the puzzle.

Sequential ambidexterity is a specific dynamic capability which can play an important role in the technological catch-up of latecomer firms with limited knowledge and resources. Through a longitudinal case study, the trajectory of a latecomer firm's transformation from a generic technology manufacturer to a world-class innovator is analysed. This paper finds that sequential ambidexterity can be the basis of building dynamic capability, which enabled a latecomer to become a market leader through three major transitions. It shows how the building of dynamic capability through sequential ambidexterity is dependent on four mechanisms: senior manager cognition of the environment; organization learning orientation; organization structure design; and process reconfiguration. Building dynamic capability is also dependent on alignment between these mechanisms within the firm. Theoretically, the paper enhances understanding of the micro-foundations of developing dynamic capability through sequential ambidexterity. It also suggests that three contingent dimensions in determining the optimal approach to ambidexterity are: (i) industry leading versus catch-up firms, (ii) the scale of the firm, and (iii) the diversity of the downstream market. Furthermore, the paper provides practical insights for latecomer firms seeking to catch-up with industry leaders.