The purpose of this study was to explore the electroencephalogram (EEG) features sensitive to situation awareness (SA) and then classify SA levels. Forty-eight participants were recruited to complete an SA standard test based on the multi-attribute task battery (MATB) II, and the corresponding EEG data and situation awareness global assessment technology (SAGAT) scores were recorded. The population with the top 25% of SAGAT scores was selected as the high-SA level (HSL) group, and the bottom 25% was the low-SA level (LSL) group. The results showed that (1) for the relative power of $\beta$1 (16–20Hz), $\beta$2 (20–24Hz) and $\beta$3 (24–30Hz), repeated measures analysis of variance (ANOVA) in three brain regions (Central Central-Parietal, and Parietal) × three brain lateralities (left, midline, and right) × two SA groups (HSL and LSL) showed a significant main effect for SA groups; post hoc comparisons revealed that compared with LSL, the above features of HSL were higher. (2) for most ratio features associated with $\beta$1 ∼ $\beta$3, ANOVA also revealed a main effect for SA groups. (3) EEG features sensitive to SA were selected to classify SA levels with small-sample data based on the general supervised machine learning classifiers. Five-fold cross-validation results showed that among the models with easy interpretability, logistic regression (LR) and decision tree (DT) presented the highest accuracy (both 92%), while among the models with hard interpretability, the accuracy of random forest (RF) was 88.8%, followed by an artificial neural network (ANN) of 84%. The above results suggested that (1) the relative power of $\beta$1 ∼ $\beta$3 and their associated ratios were sensitive to changes in SA levels; (2) the general supervised machine learning models all exhibited good accuracy (greater than 75%); and (3) furthermore, LR and DT are recommended by combining the interpretability and accuracy of the models.

The status of the genera Euparagonimus Chen, 1963 and Pagumogonimus Chen, 1963 relative to Paragonimus Braun, 1899 was investigated using DNA sequences from the mitochondrial cytochrome c oxidase subunit I (CO1) gene (partial) and the nuclear ribosomal DNA second internal transcribed spacer (ITS2). In the phylogenetic trees constructed, the genus Pagumogonimus is clearly not monophyletic and therefore not a natural taxon. Indeed, the type species of Pagumogonimus,P. skrjabini from China, is very closely related to Paragonimus miyazakii from Japan. The status of Euparagonimus is less obvious. Euparagonimus cenocopiosus lies distant from other lungflukes included in the analysis. It can be placed as sister to Paragonimus in some analyses and falls within the genus in others. A recently published morphological study placed E. cenocopiosus within the genus Paragonimus and probably this is where it should remain.

Frequent freezing injury greatly influences winter wheat production; thus, effective prevention and a command of agricultural production are vital. The freezing injury monitoring method integrated with ‘3S’ (geographic information systems (GIS), global positioning system (GPS) and remote sensing (RS)) technology has an unparalleled advantage. Using HuanJing (HJ)-1A/1B satellite images of a winter wheat field in Shanxi Province, China plus a field survey, crop types and winter wheat planting area were identified through repeated visual interpretations of image information and spatial analyses conducted in GIS. Six vegetation indices were extracted from processed HJ-1A/1B satellite images to determine whether the winter wheat suffered from freezing injury and its degree of severity and recovery, using change vector analysis (CVA), the freeze injury representative vegetation index and the combination of the two methods, respectively. Accuracy of the freezing damage classification results was verified by determining the impact of freezing damage on yield and quantitative analysis. The CVA and the change of normalized difference vegetation index (ΔNDVI) monitoring results were different so a comprehensive analysis of the combination of CVA and ΔNDVI was performed. The area with serious freezing injury covered 0.9% of the total study area, followed by the area of no freezing injury (3.5%), moderate freezing injury (10.2%) and light freezing injury (85.4%). Of the moderate and serious freezing injury areas, 0.2% did not recover; 1.2% of the no freezing injury and light freezing injury areas showed optimal recovery, 15.6% of the light freezing injury and moderate freezing injury areas showed poor recovery, and the remaining areas exhibited general recovery.

The root-knot nematode, Meloidogyne javanica, is a major problem for the production of Sacha Inchi plants. We examined the effects of strip intercropping of Sacha Inchi/Chinese leek of 3–4 years on the seasonal dynamics of plant and soil traits in tropical China. Results indicated that in the intercropping system, a partially temporal divergence of belowground resource acquisition via niche separation occurred throughout the growing seasons, besides a complete spatially-separated plant height between the two crops. Compared with Sacha Inchi monoculture, the increased seed yield per unit area in the intercropping system was mainly attributed to the higher plant survival rate, rather than the enhanced plant traits of healthy plants. Intercropping greatly suppressed M. javanica populations only in the wet season, compared with monoculture; which may be associated with the combined effects of the direct allelopathy and indigenous microbe induced-suppressiveness. Intercropping did not affect microbial richness and α-diversity in the rhizosphere, except for the decreased fungal richness. Both bacterial and fungal composition and structure were diverged between monoculture v. intercropping system. The relative abundances of the dominant bacterial genera (Bacillus, Gaiellales, Lactococcus, Massilia and Lysobacter, etc.) differed significantly between the two cropping systems. For fungi, intercropping decreased the relative abundances of Fusarium and Gibberella, but increased those of Nectriaceae_unclassified, Chaetomiaceae, Humicola and Mortierella. Overall, Sacha Inchi/Chinese leek intercropping suppressed M. javanica populations and shifted microbial compositions (especially decreased pathogen-containing Fusarium). The increased yield and economic returns in this intercropping system provide valid information for the effective agricultural management.

This paper proposes an alternating elliptical impingement chamber in the leading edge of a gas turbine to restrain the cross flow and enhance the heat transfer, and investigates the detailed flow and heat transfer characteristics. The chamber consists of straight sections and transition sections. Numerical simulations are performed by solving the three-dimensional (3D) steady Reynolds-Averaged Navier–Stokes (RANS) equations with the Shear Stress Transport (SST) k–$\omega$ turbulence model. The influences of alternating the cross section on the impingement flow and heat transfer of the chamber are studied by comparison with a smooth semi-elliptical impingement chamber at a cross-flow Velocity Ratio (VR) of 0.2 and Temperature Ratio (TR) of 1.00 in the primary study. Then, the effects of the cross-flow VR and TR are further investigated. The results reveal that, in the semi-elliptical impingement chamber, the impingement jet is deflected by the cross flow and the heat transfer performance is degraded. However, in the alternating elliptical chamber, the cross flow is transformed to a pair of longitudinal vortices, and the flow direction at the centre of the cross section is parallel to the impingement jet, thus improving the jet penetration ability and enhancing the impingement heat transfer. In addition, the heat transfer in the semi-elliptical chamber degrades rapidly away from the stagnation region, while the longitudinal vortices enhance the heat transfer further, making the heat transfer coefficient distribution more uniform. The Nusselt number decreases with increase of VR and TR for both the semi-elliptical chamber and the alternating elliptical chamber. The alternating elliptical chamber enhances the heat transfer and moves the stagnation point up for all VR and TR, and the heat transfer enhancement is more obvious at high cross-flow velocity ratio.

Particulate deposits in aero-engine turbines change the profile of blades, increase the blade surface roughness and block internal cooling channels and film cooling holes, which generally leads to the degradation of aerodynamic and cooling performance. To reveal particle deposition effects in the turbine, unsteady simulations were performed by investigating the migration patterns and deposition characteristics of the particle contaminant in a one-stage, high-pressure turbine of an aero-engine. Two typical operating conditions of the aero-engine, i.e. high-temperature take-off and economic cruise, were discussed, and the effects of particle size on the migration and deposition of fly-ash particles were demonstrated. A critical velocity model was applied to predict particle deposition. Comparisons between the stator and rotor were made by presenting the concentration and trajectory of the particles and the resulting deposition patterns on the aerofoil surfaces. Results show that the migration and deposition of the particles in the stator passage is dominated by the flow characteristics of fluid and the property of particles. In the subsequential rotor passage, in addition to these factors, particles are also affected by the stator–rotor interaction and the interference between rotors. With higher inlet temperature and larger diameter of the particle, the quantity of deposits increases and the deposition is distributed mainly on the Pressure Side (PS) and the Leading Edge (LE) of the aerofoil.

Ruelle predicted that the maximal amplification of perturbations in homogeneous isotropic turbulence is exponential $\exp ({\sigma \sqrt {Re} \,t})$ (where $\sigma \sqrt {Re}$ is the maximal Lyapunov exponent). In our earlier works, we predicted that the maximal amplification of perturbations in fully developed turbulence is faster than exponential and is given by $\exp ({\sigma \sqrt {Re} \sqrt {t} +\sigma _1 t})$ where $\sigma \sqrt {Re} \sqrt {t}$ is much larger than $\sigma \sqrt {Re} \, t$ for small $t$. That is, we predicted superfast initial amplification of perturbations. Built upon our earlier numerical verification of our prediction, here, we conduct a large numerical verification with resolution up to $2048^3$ and Reynolds number up to $6210$. Our direct numerical simulation here confirms our analytical prediction. Our numerical simulation also demonstrates that such superfast amplification of perturbations leads to superfast nonlinear saturation. We conclude that such superfast amplification and superfast nonlinear saturation of ever existing perturbations suggest a mechanism for the generation, development and persistence of fully developed turbulence.

Leg weakness (LW) issues are a great concern for pig breeding industry. And it also has a serious impact on animal welfare. To dissect the genetic architecture of limb-and-hoof firmness in commercial pigs, a genome-wide association study was conducted on bone mineral density (BMD) in three sow populations, including Duroc, Landrace and Yorkshire. The BMD data were obtained by ultrasound technology from 812 pigs (including Duroc 115, Landrace 243 and Yorkshire 454). In addition, all pigs were genotyped using genome-by-sequencing and a total of 224 162 single-nucleotide polymorphisms (SNPs) were obtained. After quality control, 218 141 SNPs were used for subsequent genome-wide association analysis. Nine significant associations were identified on chromosomes 3, 5, 6, 7, 9, 10, 12 and 18 that passed Bonferroni correction threshold of 0.05/(total SNP numbers). The most significant locus that associated with BMD (P value = 1.92e−14) was detected at approximately 41.7 Mb on SSC6 (SSC stands for Sus scrofa chromosome). CUL7, PTK7, SRF, VEGFA, RHEB, PRKAR1A and TPO that are located near the lead SNP of significant loci were highlighted as functionally plausible candidate genes for sow limb-and-hoof firmness. Moreover, we also applied a new method to measure the BMD data of pigs by ultrasound technology. The results provide an insight into the genetic architecture of LW and can also help to improve animal welfare in pigs.

The modelling of edge carbon transport and emission on EAST tokamak under resonant magnetic perturbation (RMP) fields has been conducted with the three-dimensional edge transport code EMC3-EIRENE. The measured vertical distribution of CVI emission by the extreme ultraviolet spectrometer system for the perturbed case shows a reduction in the CVI emission by 20 % compared to the equilibrium case. The chord-integrated CVI emission can be reconstructed by EMC3-EIRENE modelling, which presents an increase in the CVI emission with RMP fields. The discrepancy between experiments and simulations has been investigated by parameter study to examine the sensitivity of the simulation results on the edge plasma conditions and the impurity perpendicular transport. It is found that the variation of edge plasma conditions for the equilibrium case cannot resolve the discrepancy in the CVI emission between simulations and measurements. The simulations with enhanced impurity perpendicular transport coefficient allows a reasonable agreement with the measured reduction of CVI emission.

Introduction: The growing scrutiny to improve Emergency Department (ED) wait times and patient flow have resulted in many efforts to increase efficiency and maximize patient throughput via systems improvements. This study investigates areas of efficiency improvement from the Emergency Physician (EP) perspective by examining EP workflow in a two phased observational time-motion study. In the initial phase, the distribution of time and activities of EPs were dissected to identify potential sources for streamlining to maximize physician productivity. The first phase was of the study was completed during the period immediately preceding the implementation of an Electronic Health Records (EHR). The second phase of the study will repeat the analysis one year post EHR implementation. This data will be dissected to again identify sources for streamlining in an EHR environment and to identify shifts in work flow from a paper-based system. Methods: An observational time motion study was conducted at St. Mary's Hospital ED, in Kitchener Ontario. An observer was paired with an EP for the duration of an 8 hour shift, to a total of 14 shifts in the first phase of the study. Nine task categories were measured concurrently with a stopwatch application on a tablet, along with the number of interruptions experienced by the EP. Means of each category were calculated and converted to percentages, representing the amount of time per 8 hour shift dedicated to each activity. The second phase will be repeated in Fall 2020, 1 year after EHR implementation. Results: A total of 14 shifts were observed, accounting for 112 hours of observation. EP's time was allocated amongst the following categories: direct patient interaction (40.8%), documentation (27.1%), reviewing patient results (18.4%), communicating with ED staff (7.63%), personal activities (5.7%), writing orders (5.1%), communicating with consultants (3.3%), teaching (1.7%) and medical information searches (1.3%). On average, EPs experienced 15.8 interruptions over the course of an 8 hour shift. Conclusion: In a paper charting system, the direct patient interaction accounts for the largest timeshare over the course of a given shift. However, the next two largest categories, documentation and reviewing patient data, both represent areas of potential streamlining via clerical improvements. Additionally, detailed measurements of EPs’ activities have proven feasible and provides the potential for future insight into the impact of EHR's on EP workflow.

The coronal heating problem is a long-standing perplexing issue. In this study, 13 solar activity indexes are used to investigate their phase relation with the sunspot number (SSN). Only three of them are found to statistically significantly lag the SSN (large-scale magnetic activity) by about one solar rotation period; the three indexes are total solar irradiance (TSI), the modified coronal index, and the solar wind velocity; the former two indexes may represent the long-term variation of energy quantity of the heated photosphere and corona, respectively. The Mount Wilson Sunspot Index (MWSI) and the Magnetic Plage Strength Index (MPSI), which reflect the large- and small-scale magnetic field activities, respectively, are also utilised to investigate their phase relations with the three indexes. The three indexes are found to be much more intimately related to MPSI than to MWSI, and MWSI statistically significantly leads TSI by about one rotation period. The heated corona is found to pulse perfectly in step with the small-scale magnetic activity rather than the large-scale magnetic activity; furthermore, combined with observations, our statistical evidence should thus attribute coronal heating firmly to small-scale magnetic activity phenomena, such as spicules, micro-flares, nano-flares, and others. The photosphere and the corona are synchronously heated, which should seemingly prefer magnetic reconnection heating to wave heating. In the long term, such a coronal heating way is inferred effective. Statistically, it is also small-scale magnetic activity phenomena that produce TSI enhancement. Coronal heating and solar wind acceleration are found to be synchronous, as standard models require.

The strong-coupling mode, called the “quasimode”, is excited by stimulated Brillouin scattering (SBS) in high-intensity laser–plasma interactions. Also SBS of the quasimode competes with SBS of the fast mode (or slow mode) in multi-ion species plasmas, thus leading to a low-frequency burst behavior of SBS reflectivity. Competition between the quasimode and the ion-acoustic wave (IAW) is an important saturation mechanism of SBS in high-intensity laser–plasma interactions. These results give a clear explanation of the low-frequency periodic burst behavior of SBS and should be considered as a saturation mechanism of SBS in high-intensity laser–plasma interactions.

Generally, earth rotating and non-spherical perturbation of the earth in re-entry motion model are simplified using the standard trajectory guidance method. The re-entry motion is also simplified to horizontal motion and vertical motion and controlled, respectively. The simplification of re-entry motion model will lead to loss of motion accuracy and location accuracy. The direct decomposition will lead to the reduction of control accuracy because the horizontal motion and the vertical motion are coupled in re-entry. To improve the standard trajectory guidance method, the standard trajectory guidance method based on decoupling control variables and waypoint is proposed in this paper. The proposed guidance method will not simplify earth rotating and non-spherical perturbation of the earth in motion equation or decompose the re-entry motion to horizontal motion and vertical motion. Trajectory waypoint is adopted to reduce the change frequency of tracking states, because tracking states change frequently if the entire standard trajectory is tracked in real time.

At present, the number of people with tuberculosis in China is second only to India and ranks second in the world. Under such a severe case of tuberculosis in China, prevention and control of pulmonary tuberculosis are urgently needed. This study aimed to study the temporal and geographical relevance of the pathogenesis of pulmonary tuberculosis and the factors affecting the incidence of tuberculosis. Spatial autocorrelation model was used to study the spatial distribution characteristics of pulmonary tuberculosis from a quantitative level. The research results showed that the overall incidence of pulmonary tuberculosis (IPT) in China was low in the east, high in the west and had certain seasonal characteristics. We use Spatial Lag Model to explore influencing factors of pulmonary tuberculosis. It indicates that the IPT is high in areas with underdeveloped economics, poor social services and low average smoking ages. Additionally, the IPT is high in areas with high AIDS prevalence. Also, compared with Classical Regression Model and Spatial Error Model, our model has smaller values of Akaike information criterion and Schwarz criterion. Besides, our model has bigger values of coefficient of determination (R2) and log-likelihood (log L) than the other two models. Apart from that, it is more significant than Spatial Error Models in the spatial dependence test for the IPT.

Using an age-structured process-based simulation model for diamondback moth (DBM), we model the population dynamics of this major Brassica pest using the cropping practices and climate of Guangdong, China. The model simulates two interacting sub-populations (demes), each representing a short season crop. The simulated DBM abundance, and hence pest problems, depend on planting regime, crop hygiene and biological control. A continuous supply of hosts, a low proportion of crop harvested and long residue times between harvest and replanting each exacerbate pest levels. Biological control provided by a larval parasitoid can reduce pest problems, but not eliminate them when climate is suitable for DBM and under certain planting practices. The classic Integrated Pest Management (IPM) method of insecticide application, when pest threshold is reached, proved effective and halved the number of insecticide sprays when compared with the typical practice of weekly insecticide application.

This paper aims to build the finite element model of the composite sinusoidal specimens and to carry out the parametric analysis. In this paper, the damage behaviour and the energy-absorbing results of composite sinusoidal specimens have been studied by quasi-static crushing experiments. The failure mechanisms of specimens under quasi-static crushing is further analysed. A numerical simulation has been performed by using the finite element model code LS-DYNA. The numerical results, in terms of load -displacement data, have been compared against experimental data, and good agreement has been found. Moreover, a sensitivity study has been carried out by varying material properties in order to assess their influence on the numerical results, and the material parameter selection scheme is optimised based on the constructed corresponding response surfaces. The results show that the response surface model has passed the test of goodness of fit, and the optimisation method can effectively assist the finite element modelling, and greatly decrease the numbers of trial and error.

The uptake of genomic selection (GS) by the swine industry is still limited by the costs of genotyping. A feasible alternative to overcome this challenge is to genotype animals using an affordable low-density (LD) single nucleotide polymorphism (SNP) chip panel followed by accurate imputation to a high-density panel. Therefore, the main objective of this study was to screen incremental densities of LD panels in order to systematically identify one that balances the tradeoffs among imputation accuracy, prediction accuracy of genomic estimated breeding values (GEBVs), and genotype density (directly associated with genotyping costs). Genotypes using the Illumina Porcine60K BeadChip were available for 1378 Duroc (DU), 2361 Landrace (LA) and 3192 Yorkshire (YO) pigs. In addition, pseudo-phenotypes (de-regressed estimated breeding values) for five economically important traits were provided for the analysis. The reference population for genotyping imputation consisted of 931 DU, 1631 LA and 2103 YO animals and the remainder individuals were included in the validation population of each breed. A LD panel of 3000 evenly spaced SNPs (LD3K) yielded high imputation accuracy rates: 93.78% (DU), 97.07% (LA) and 97.00% (YO) and high correlations (>0.97) between the predicted GEBVs using the actual 60 K SNP genotypes and the imputed 60 K SNP genotypes for all traits and breeds. The imputation accuracy was influenced by the reference population size as well as the amount of parental genotype information available in the reference population. However, parental genotype information became less important when the LD panel had at least 3000 SNPs. The correlation of the GEBVs directly increased with an increase in imputation accuracy. When genotype information for both parents was available, a panel of 300 SNPs (imputed to 60 K) yielded GEBV predictions highly correlated (⩾0.90) with genomic predictions obtained based on the true 60 K panel, for all traits and breeds. For a small reference population size with no parents on reference population, it is recommended the use of a panel at least as dense as the LD3K and, when there are two parents in the reference population, a panel as small as the LD300 might be a feasible option. These findings are of great importance for the development of LD panels for swine in order to reduce genotyping costs, increase the uptake of GS and, therefore, optimize the profitability of the swine industry.

To explore the effects of maternal nutrition on offspring muscle characteristics, a total of 56 sows were assigned to one of the four dietary groups during gestation: control (CON), or control diets supplemented with methyl donor (MET), bisphenol A (BPA), and combined BPA and MET (BPA+MET). Compared with CON offspring, MET offspring showed a higher meat redness value, but lower glycogen content in the longissimus thoracis (LT). Moreover, compared with CON offspring, MET offspring showed lower LT glycogen synthase (GS) mRNA levels at birth and the finishing stage, and increased methylation at the GS promoter. Prenatal BPA exposure reduced the pH and redness value of meat, but increased the lightness value, lactate content, glycolytic potential and lactate dehydrogenase (LDH) enzyme activity in the LT muscle. Prenatal BPA exposure increased LDH mRNA levels in the LT muscle at birth and the finishing stage, and reduced methylation at the LDH promoter. Thus, maternal MET affects muscle GS and LDH expression via DNA methylation, thereby resulting in persistent effects on pork quality.