Flumioxazin and S-metolachlor are widely used in conventional sweetpotato production in North Carolina and other states; however, some growers have recently expressed concerns about potential effects of these herbicides on sweetpotato yield and quality. Previous research indicates that activated charcoal has the potential to reduce herbicide injury. Field studies were conducted in 2021 and 2022 to determine whether flumioxazin applied preplant and S-metolachlor applied before and after transplanting negatively affect sweetpotato yield and quality when activated charcoal is applied with transplant water. The studies evaluated five herbicide treatments and two activated charcoal treatments. Herbicide treatments included two flumioxazin rates, one S-metolachlor rate applied immediately before and immediately after transplanting, and no herbicide. Charcoal treatments consisted of activated charcoal applied at 9 kg ha−1, and no charcoal. No visual injury from herbicides or charcoal was observed. Likewise, no effect of herbicide or charcoal treatment on no. 1, marketable (sum of no. 1 and jumbo grades), or total yield (sum of canner, no. 1, and jumbo grades) was observed. Additionally, shape analysis conducted on calculated length-to-width ratio (LWR) for no. 1 sweetpotato roots found no effect from flumioxazin at either rate on sweetpotato root shape. However, both S-metolachlor treatments resulted in lower LWR of no. 1 sweetpotato roots in 2021. Results are consistent with prior research and indicate that flumioxazin and S-metolachlor are safe for continued use on sweetpotato at registered rates.

Greenhouse trials were conducted to determine the response of stevia to reduced-risk synthetic and nonsynthetic herbicides applied over-the-top post-transplant. In addition, field trials were conducted with stevia grown in a polyethylene mulch production system to determine crop response and weed control in planting holes to reduced-risk synthetic and nonsynthetic herbicides applied post-transplant directed. Treatments included caprylic acid plus capric acid, clove oil plus cinnamon oil, d-limonene, acetic acid (200 grain), citric acid, pelargonic acid, eugenol, ammonium nonanoate, and ammoniated soap of fatty acids. Stevia yield (dry aboveground biomass) in the greenhouse was reduced by all herbicide treatments. Citric acid and clove oil plus cinnamon oil were the least injurious, reducing yield by 16% to 20%, respectively. In field studies, d-limonene, pelargonic acid, ammonium nonanoate, and ammoniated soap of fatty acids controlled Palmer amaranth (>90% 1 wk after treatment (WAT). In field studies caprylic acid plus capric acid, pelargonic acid, and ammonium nonanoate caused >30% injury to stevia plants at 2 WAT, and d-limonene, citric acid, acetic acid, and ammoniated soap of fatty acids caused 18% to 25% injury 2 WAT. Clove oil plus cinnamon oil and eugenol caused <10% injury. Despite being injurious, herbicides applied in the field did not reduce yield compared to the nontreated check. Based upon yield data, these herbicides have potential for use in stevia; however, these products could delay harvest if applied to established stevia. In particular, clove oil plus cinnamon oil has potential for use for early-season weed management for organic production systems. The application of clove oil plus cinnamon oil over-the-top resulted in <10% injury 28 d after treatment (DAT) in the greenhouse and 3% injury 6 WAT postemergence-directed in the field. In addition, this treatment provided 95% control of Palmer amaranth 4 WAT.

This article examines the development, early operation and subsequent failure of the Tot-Kolowa Red Cross irrigation scheme in Kenya’s Kerio Valley. Initially conceived as a technical solution to address regional food insecurity, the scheme aimed to scale up food production through the implementation of a fixed pipe irrigation system and the provision of agricultural inputs for cash cropping. A series of unfolding circumstances, however, necessitated numerous modifications to the original design as the project became increasingly entangled with deep and complex histories of land use patterns, resource allocation and conflict. Failure to understand the complexity of these dynamics ultimately led to the project’s collapse as the region spiralled into a period of significant unrest. In tracing these events, we aim to foreground the lived realities of imposed development, including both positive and negative responses to the scheme’s participatory obligations and its wider impact on community resilience.

Field studies were conducted to assess the efficacy of physical weed management of Palmer amaranth management in cucumber, peanut, and sweetpotato. Treatments were arranged in a 3 × 4 factorial in which the first factor included a treatment method of electrical, mechanical, or hand-roguing Palmer amaranth control and the second factor consisted of treatments applied when Palmer amaranth was approximately 0.3, 0.6, 0.9, or 1.2 m above the crop canopy. Four wk after treatment (WAT), the electrical applications controlled Palmer amaranth at least 27 percentage points more than the mechanical applications when applied at the 0.3- and 0.6-m timings. At the 0.9- and 1.2-m application timings 4 WAT, electrical and mechanical applications controlled Palmer amaranth by at most 87%. Though hand removal generally resulted in the greatest peanut pod count and total sweetpotato yield, mechanical and electrical control resulted in similar yield to the hand-rogued plots, depending on the treatment timing. With additional research to provide insight into the optimal applications, there is potential for electrical control and mechanical control to be used as alternatives to hand removal. Additional studies were conducted to determine the effects of electrical treatments on Palmer amaranth seed production and viability. Treatments consisted of electricity applied to Palmer amaranth at first visible inflorescence, 2 wk after first visible inflorescence (WAI) or 4 WAI. Treatments at varying reproductive maturities did not reduce the seed production immediately after treatment. However, after treatment, plants primarily died and ceased maturation, reducing seed production assessed at 4 WAI by 93% and 70% when treated at 0 and 2 WAI, respectively. Treatments did not have a negative effect on germination or seedling length.

In this study, we evaluated the impact of a microbiology nudge on de-escalation to first-generation cephalosporins in hospitalized patients with urinary tract infections secondary to Escherichia coli, Klebsiella pneumoniae, and Proteus mirabilis isolates with minimum inhibitory concentrations (MICs) ≤ 16 µg/mL. De-escalation to first generation-cephalosporins was uncommon at MICs = 4–16 µg/mL.

Laboratory and greenhouse studies were conducted to evaluate the effects of chemical treatments applied to Palmer amaranth seeds or gynoecious plants that retain seeds to determine seed germination and quality. Treatments applied to physiologically mature Palmer amaranth seed included acifluorfen, dicamba, ethephon, flumioxazin, fomesafen, halosulfuron, linuron, metribuzin, oryzalin, pendimethalin, pyroxasulfone, S-metolachlor, saflufenacil, trifluralin, and 2,4-D plus crop oil concentrate applied at 1× and 2× the suggested use rates from the manufacturer. Germination was reduced by 20% when 2,4-D was used, 15% when dicamba was used, and 13% when halosulfuron and pyroxasulfone were used. Use of dicamba, ethephon, halosulfuron, oryzalin, trifluralin, and 2,4-D resulted in decreased seedling length by an average of at least 50%. Due to the observed effect of dicamba, ethephon, halosulfuron, oryzalin, trifluralin, and 2,4-D, these treatments were applied to gynoecious Palmer amaranth inflorescence at the 2× registered application rates to evaluate their effects on progeny seed. Dicamba use resulted in a 24% decrease in seed germination, whereas all other treatment results were similar to those of the control. Crush tests showed that seed viability was greater than 95%, thus dicamba did not have a strong effect on seed viability. No treatments applied to Palmer amaranth inflorescence affected average seedling length; therefore, chemical treatments did not affect the quality of seeds that germinated.

Field studies were conducted to evaluate linuron for POST control of Palmer amaranth in sweetpotato to minimize reliance on protoporphyrinogen oxidase (PPO)-inhibiting herbicides. Treatments were arranged in a two by four factorial in which the first factor consisted of two rates of linuron (420 and 700 g ai ha−1), and the second factor consisted of linuron applied alone or in combinations of linuron plus a nonionic surfactant (NIS; 0.5% vol/vol), linuron plus S-metolachlor (800 g ai ha−1), or linuron plus NIS plus S-metolachlor. In addition, S-metolachlor alone and nontreated weedy and weed-free checks were included for comparison. Treatments were applied to ‘Covington’ sweetpotato 8 d after transplanting (DAP). S-metolachlor alone provided poor Palmer amaranth control because emergence had occurred at applications. All treatments that included linuron resulted in at least 98% and 91% Palmer amaranth control 1 and 2 wk after treatment (WAT), respectively. Including NIS with linuron did not increase Palmer amaranth control compared to linuron alone, but it resulted in greater sweetpotato injury and subsequently decreased total sweetpotato yield by 25%. Including S-metolachlor with linuron resulted in the greatest Palmer amaranth control 4 WAT, but increased crop foliar injury to 36% 1 WAT compared to 17% foliar injury from linuron alone. Marketable and total sweetpotato yields were similar between linuron alone and linuron plus S-metolachlor or S-metolachlor plus NIS treatments, though all treatments resulted in at least 39% less total yield than the weed-free check resulting from herbicide injury and/or Palmer amaranth competition. Because of the excellent POST Palmer amaranth control from linuron 1 WAT, a system that includes linuron applied 7 DAP followed by S-metolachlor applied 14 DAP could help to extend residual Palmer amaranth control further into the critical period of weed control while minimizing sweetpotato injury.

The first demonstration of laser action in ruby was made in 1960 by T. H. Maiman of Hughes Research Laboratories, USA. Many laboratories worldwide began the search for lasers using different materials, operating at different wavelengths. In the UK, academia, industry and the central laboratories took up the challenge from the earliest days to develop these systems for a broad range of applications. This historical review looks at the contribution the UK has made to the advancement of the technology, the development of systems and components and their exploitation over the last 60 years.

Field studies were conducted in 2019 and 2020 to compare the effects of shade cloth light interception and Palmer amaranth (Amaranthus palmeri S. Watson) competition on ‘Covington’ sweetpotato [Ipomoea batatas (L.) Lam.]. Treatments consisted of a seven by two factorial arrangement, in which the first factor included shade cloth with an average measured light interception of 41%, 59%, 76%, and 94% and A. palmeri thinned to 0.6 or 3.1 plants m−2 or a nontreated weed-free check; and the second factor included shade cloth or A. palmeri removal timing at 6 or 10 wk after planting (WAP). Amaranthus palmeri light interception peaked around 710 to 840 growing degree days (base 10 C) (6 to 7 WAP) with a maximum light interception of 67% and 84% for the 0.6 and 3.1 plants m−2 densities, respectively. Increasing shade cloth light interception by 1% linearly increased yield loss by 1% for No. 1, jumbo, and total yield. Yield loss increased by 36%, 23%, and 35% as shade cloth removal was delayed from 6 to 10 WAP for No. 1, jumbo, and total yield, respectively. F-tests comparing reduced versus full models of yield loss provided no evidence that the presence of yield loss from A. palmeri light interception caused yield loss different than that explained by the shade cloth at similar light-interception levels. Results indicate that shade cloth structures could be used to simulate Covington sweetpotato yield loss from A. palmeri competition, and light interception could be used as a predictor for expected yield loss from A. palmeri competition.

Bayesian analysis of radiocarbon (14C) dates in North American archaeology is increasing, especially among archaeologists working in deeper time. However, historical archaeologists have been slow to embrace these new techniques, and there have been only a few examples of the incorporation of calendar dates as informative priors in Bayesian models in such work in the United States. To illustrate the value of Bayesian approaches to sites with both substantial earlier Native American occupations as well as a historic era European presence, we present the results of our Bayesian analysis of 14C dates from the earlier Guale village and the Mission period contexts from the Sapelo Shell Ring Complex (9MC23) in southern Georgia. Jefferies and Moore have explored the Spanish Mission period deposits at this site to better understand the Native American interactions with the Spanish during the 16th and 17th centuries along the Georgia Coast. Given the results of our Bayesian modeling, we can say with some degree of confidence that the deposits thus far excavated and sampled contain important information dating to the 17th-century mission on Sapelo Island. In addition, our modeling of new dates suggests the range of the pre-Mission era Guale village. Based on these new dates, we can now say with some degree of certainty which of the deposits sampled likely contain information that dates to one of the critical periods of Mission period research, the AD 1660–1684 period that ushered in the close of mission efforts on the Georgia Coast.

Field studies were conducted to determine sweetpotato tolerance to and weed control from management systems that included linuron. Treatments included flumioxazin preplant (107 g ai ha−1) followed by (fb) S-metolachlor (800 g ai ha−1), oryzalin (840 g ai ha−1), or linuron (280, 420, 560, 700, and 840 g ai ha−1) alone or mixed with S-metolachlor or oryzalin applied 7 d after transplanting. Weeds did not emerge before the treatment applications. Two of the four field studies were maintained weed-free throughout the season to evaluate sweetpotato tolerance without weed interference. The herbicide program with the greatest sweetpotato yield was flumioxazin fb S-metolachlor. Mixing linuron with S-metolachlor did not improve Palmer amaranth management and decreased marketable yield by up to 28% compared with flumioxazin fb S-metolachlor. Thus, linuron should not be applied POST in sweetpotato if Palmer amaranth has not emerged at the time of application.

A detailed experimental campaign into separated shear layers stemming from rectangular sections (having aspect ratios of 5 : 1, 3 : 1 and 1 : 1) was carried out at Reynolds numbers range between $1.34\times 10^{4}$ and $1.18\times 10^{5}$ based on the body thickness. Particle image velocimetry was used to locate the highest concentration of fluctuations in the velocity field and subsequent hot-wire measurements at those locations provided adequate spectral resolution to follow the evolution of various instabilities that are active within the separated shear layer. Similar to recent findings by this same group, the shear layer behaviour is observed to contain a combination of Reynolds invariant characteristics, including its time-averaged position, while other properties demonstrate clear Reynolds number dependency, including the spatial amplification of turbulent kinetic energy. Additional results here show that the ratio of side lengths of the body is a key parameter in revealing these effects. One reason for this is the level of coupling between modes of instability, which is evaluated using two-point correlation methods. These findings indicate that the separated shear layer on a bluff body is highly nonlinear. A specific set of scales responsible for these unique behaviours is identified and discussed, along with their relationship to other scales in the flow.

Scaling characteristics, essential to the mechanisms of transition in square-prism shear layers, were explored experimentally. In particular, the evolution of the dominant instability modes as a function of Reynolds number were reported in the range $1.5\times 10^{4}\lesssim Re_{D}\lesssim 7.5\times 10^{4}$. It was found that the ratio between the shear layer frequency and the shedding frequency obeys a power-law scaling relation. Adherence to the power-law relationship, which was derived from hot-wire measurements, has been supported by two additional and independent scaling considerations, namely, by particle image velocimetry measurements to observe the evolution of length and velocity scales in the shear layer during transition, and by comparison to direct numerical simulations to illuminate the properties of the front-face boundary layer. The nonlinear dependence of the shear layer instability frequency is sustained by the influence of $Re_{D}$ on the thickness of the laminar front-face boundary layer. In corroboration with the original scaling argument for the circular cylinder, the length scale of the shear layer was the only source of nonlinearity in the frequency ratio scaling, within the range of Reynolds numbers reported. The frequency ratio scaling may therefore be understood by the influence of $Re_{D}$ on the appropriate length scale of the shear layer. This length scale was observed to be the momentum thickness evaluated at a transition point, defined where the Kelvin–Helmholtz instability saturates.