An actively controllable cascaded proton acceleration driven by a separate 0.8 picosecond (ps) laser is demonstrated in proof-of-principle experiments. MeV protons, initially driven by a femtosecond laser, are further accelerated and focused into a dot structure by an electromagnetic pulse (EMP) on the solenoid, which can be tuned into a ring structure by increasing the ps laser energy. An electrodynamics model is carried out to explain the experimental results and show that the dot-structured proton beam is formed when the outer part of the incident proton beam is optimally focused by the EMP force on the solenoid; otherwise, it is overfocused into a ring structure by a larger EMP. Such a separately controlled mechanism allows precise tuning of the proton beam structures for various applications, such as edge-enhanced proton radiography, proton therapy and pre-injection in traditional accelerators.

Nonlinear optical gain modulation (NOGM) is an effective approach for generating highly coherent femtosecond Raman pulses. In a typical NOGM system, the pump pulse energy boosting unit and nonlinear frequency conversion unit are separated, which poses a difficulty in generating Raman solitons with pulse energy over the μJ level. Here, we demonstrate an integrated ultrafast ytterbium-Raman fiber amplifier, which accomplishes pump pulse amplification and Raman pulse conversion simultaneously in ytterbium-doped fiber (YDF). The integrated ytterbium-Raman fiber amplifier could generate approximately 1 μJ 1121 nm Raman pulses with a pulse duration of 589 fs under a conversion efficiency of 69.9%. The result represents the highest pulse energy experimentally recorded in NOGM systems. Simulation further reveals that YDF gain could promote Raman conversion efficiency and reduce nonlinear chirp accumulation, which leads to improved performance of generated Raman pulses. Meanwhile, the feasibility of generating 10 μJ level Raman pulses using such a hybrid gain setup was also confirmed numerically.

Compliant and safe human–robot interaction is an important requirement in lower limb exoskeleton design. Motivated by this need, this paper presents the design of a compatible lower limb exoskeleton with variable stiffness actuation and anthropomorphic joint mechanisms, for walking assistance and gait rehabilitation. A novel variable stiffness actuator (VSA) based on a guide-bar mechanism was designed, to provide force and impedance controllability. By changing the crank length of the mechanism, the stiffness of the actuator is adjusted in a wide range (from 0 to 1301 Nm/rad), at fast speed (about 2582 Nm/rad/s), and with low-energy cost. These features make it possible for online stiffness adjustment during one gait cycle, to change the human–robot coupling behavior and improve the performance of the exoskeleton. An anthropomorphic hip joint mechanism was designed based on a parallelogram linkage and a passive joint compensation approach, which absorbs misalignment and improves kinematic compatibility between the human and the exoskeleton joint. Furthermore, a torque control-based multimode control strategy, which consists of passive mode, active mode, and hybrid mode, was developed for different disease stages. Finally, the torque control performance of the actuator was verified by benchtop test, and experimental validations of the exoskeleton with a human subject were carried out, which demonstrate that compliant human–robot interaction was achieved, and stiffness variation benefits for control performance improvement when the control mode changes.

The sulphur microbial diet (SMD), a dietary pattern associated with forty-three sulphur-metabolising bacteria, may influence gut microbiota composition and contribute to ageing process through gut-produced hydrogen sulfide (H2S). We aimed to explore the association between SMD and biological age (BA) acceleration, using the cross-sectional study that included 71 579 individuals from the UK Biobank. The SMD score was calculated by multiplying β-coefficients by corresponding serving sizes and summing them, based on dietary data collected using the Oxford WebQ, a 24-hour dietary assessment tool. BA was assessed using Klemerae–Doubal (KDM) and PhenoAge methods. The difference between BA and chronological age refers to the age acceleration (AgeAccel), termed ‘KDMAccel’ and ‘PhenoAgeAccel’. Generalised linear regression was performed. Mediation analyses were used to investigate underlying mediators including BMI and serum aspartate aminotransferase/alanine aminotransferase (AST/ALT) ratio. Following adjustment for multiple variables, a positive association was observed between consuming a dietary pattern with a higher SMD score and both KDMAccel (βQ4 v. Q1 = 0·35, 95 % CI = 0·27, 0·44, P < 0·001) and PhenoAgeAccel (βQ4 v. Q1 = 0·32, 95 % CI = 0·23, 0·41, P < 0·001). Each 1-SD increase in SMD score was positively associated with the acceleration of BA by 7·90 % for KDMAccel (P < 0·001) and 7·80 % for PhenoAgeAccel (P < 0·001). BMI and AST/ALT mediated the association. The stratified analysis revealed stronger accelerated ageing impacts in males and smokers. Our study indicated a higher SMD score is associated with elevated markers of biological ageing, supporting the potential utility of gut microbiota-targeted dietary interventions in attenuating the ageing process.

This paper provides an overview of the current status of ultrafast and ultra-intense lasers with peak powers exceeding 100 TW and examines the research activities in high-energy-density physics within China. Currently, 10 high-intensity lasers with powers over 100 TW are operational, and about 10 additional lasers are being constructed at various institutes and universities. These facilities operate either independently or are combined with one another, thereby offering substantial support for both Chinese and international research and development efforts in high-energy-density physics.

Machine learning has already shown promising potential in tiled-aperture coherent beam combining (CBC) to achieve versatile advanced applications. By sampling the spatially separated laser array before the combiner and detuning the optical path delays, deep learning techniques are incorporated into filled-aperture CBC to achieve single-step phase control. The neural network is trained with far-field diffractive patterns at the defocus plane to establish one-to-one phase-intensity mapping, and the phase prediction accuracy is significantly enhanced thanks to the strategies of sin-cos loss function and two-layer output of the phase vector that are adopted to resolve the phase discontinuity issue. The results indicate that the trained network can predict phases with improved accuracy, and phase-locking of nine-channel filled-aperture CBC has been numerically demonstrated in a single step with a residual phase of λ/70. To the best of our knowledge, this is the first time that machine learning has been made feasible in filled-aperture CBC laser systems.

The betatron radiation source features a micrometer-scale source size, a femtosecond-scale pulse duration, milliradian-level divergence angles and a broad spectrum exceeding tens of keV. It is conducive to the high-contrast imaging of minute structures and for investigating interdisciplinary ultrafast processes. In this study, we present a betatron X-ray source derived from a high-charge, high-energy electron beam through a laser wakefield accelerator driven by the 1 PW/0.1 Hz laser system at the Shanghai Superintense Ultrafast Laser Facility (SULF). The critical energy of the betatron X-ray source is 22 ± 5 keV. The maximum X-ray flux reaches up to 4 × 109 photons for each shot in the spectral range of 5–30 keV. Correspondingly, the experiment demonstrates a peak brightness of 1.0 × 1023 photons·s−1·mm−2·mrad−2·0.1%BW−1, comparable to those demonstrated by third-generation synchrotron light sources. In addition, the imaging capability of the betatron X-ray source is validated. This study lays the foundation for future imaging applications.

This paper presents a numerical study on the flow around two tandem circular cylinders beneath a free surface at a Reynolds number of $180$. The free-surface effects on the wake dynamics and hydrodynamic forces are investigated through a parametric study, covering a parameter space of gap ratios from $0.20$ to $2.00$, spacing ratios from $1.50$ to $4.00$ and Froude numbers from $0.2$ to $0.8$. A jet-like flow accompanied by a shear layer of positive vorticity separating from the free surface is formed in the wake at small gap ratios, which significantly alters the wake pattern through its dynamic behaviours. At shallow submergence depths, the three-dimensional wake transitions from mode B to mode A as the distance between the cylinders increases. As submergence depth increases, the wavy deformation of the primary vortex cores disappears in the wake, and the flow transitions to a two-dimensional state. Higher Froude numbers can extend the effect of the free surface to deeper submergence depths. The critical spacing ratio tends to be larger at higher Froude numbers. Furthermore, the free-surface deformation is examined. The free-surface profile typically comprises a hydraulic jump immediately ahead of the upstream cylinder, trapped waves in the vicinity of the two tandem cylinders and well-defined travelling waves on the downstream side. The frequencies of the waves cluster around the vortex shedding frequency, indicating a close association between the generation of waves and the vortex shedding process.

EXOSC10 is an exosome-associated ribonuclease that degrades and processes a wide range of transcripts in the nucleus. The initial segment (IS) of the epididymis is crucial for sperm transport and maturation in mice by affecting the absorption and secretion that is required for male fertility. However, the role of EXOSC10 ribonuclease-mediated RNA metabolism within the IS in the regulation of gene expression and sperm maturation remains unknown. Herein, we established an Exosc10 conditional knockout (Exosc10 cKO) mouse model by crossing Exosc10F/F mice with Lcn9-Cre mice which expressed recombinase in the principal cells of IS as early as post-natal day 17. Morphological and histological analyses revealed that Exosc10 cKO males had normal spermatogenesis and development of IS. Moreover, the sperm concentration, morphology, motility, and frequency of acrosome reactions in the cauda epididymides of Exosc10 cKO mice were comparable with those of control mice. Thus, Exosc10 cKO males had normal fertility. Collectively, our genetic mouse model and findings demonstrate that loss of EXOSC10 in the IS of epididymis is dispensable for sperm maturation and male fertility.

This study aimed to estimate the nationwide prevalence of cardiometabolic diseases (CMD) among adults with underweight in the US general population. Using data from the National Health and Nutrition Examination Survey (1999–2020), we estimated the age-standardised prevalence of dyslipidemia, hypertension, diabetes, chronic kidney disease, CVD and the presence of zero or at least two CMD. Multivariable Poisson regressions were used to compare CMD prevalence between subgroups, adjusting for age, sex and race/ethnicity. Among the 855 adults with underweight included, the weighted mean age was 40·8 years, with 68·1 % being women and 70·4 % non-Hispanic White. The estimated prevalence rates were 23·4 % for dyslipidemia (95 % CI 19·4 %, 27·5 %), 15·6 % for hypertension (95 % CI 13·3 %, 17·8 %), 2·5 % for diabetes (95 % CI 1·5 %, 3·5 %), 7·9 % for chronic kidney disease (95 % CI 6·9 %, 8·8 %) and 6·1 % for CVD (95 % CI 4·3 %, 7·9 %). The prevalence of having zero and at least two CMD was 50·6 % (95 % CI 44·1 %, 57·0 %) and 12·3 % (95 % CI 8·1 %, 16·4 %), respectively. Non-Hispanic Black adults had significantly higher prevalence of diabetes (adjusted prevalence ratio, 3·35; 95 % CI 1·35, 8·30) compared with non-Hispanic White adults. In conclusion, approximately half of the underweight adults had at least one CMD, and 12·3 % had at least two CMD. Prevention and management of CMD in underweight adults are critical yet neglected public health challenges.

The spatio-temporal scales, as well as a comprehensive self-sustained mechanism of the reattachment unsteadiness in shock wave/boundary layer interaction, are investigated in this study. Direct numerical simulations reveal that the reattachment unsteadiness of a Mach 7.7 laminar inflow causes over $26\,\%$ variation in wall friction and up to $20\,\%$ fluctuation in heat flux at the reattachment of the separation bubble. A statistical approach, based on the local reattachment upstream movement, is proposed to identify the spanwise and temporal scales of reattachment unsteadiness. It is found that two different types, i.e. self-induced and random processes, dominate different regions of reattachment. A self-sustained mechanism is proposed to comprehend the reattachment unsteadiness in the self-induced region. The intrinsic instability of the separation bubble transports vorticity downstream, resulting in an inhomogeneous reattachment line, which gives rise to baroclinic production of quasi-streamwise vortices. The pairing of these vortices initiates high-speed streaks and shifts the reattachment line upstream. Ultimately, viscosity dissipates the vortices, triggering instability and a new cycle of reattachment unsteadiness. The temporal scale and maximum vorticity are estimated with the self-sustained mechanism via order-of-magnitude analysis of the enstrophy. The advection speed of friction, derived from the assumption of coherent structures advecting with a Blasius-type boundary layer, aligns with the numerical findings.

Let G and H be two vertex disjoint graphs. The join $G+H$ is the graph with $V(G+H)=V(G)+V(H)$ and $E(G+H)=E(G)\cup E(H)\cup \{xy\;|\; x\in V(G), y\in V(H)\}$. A (finite) linear forest is a graph consisting of (finite) vertex disjoint paths. We prove that for any finite linear forest F and any nonnull graph H, if $\{F, H\}$-free graphs have a $\chi $-binding function $f(\omega )$, then $\{F, K_n+H\}$-free graphs have a $\chi $-binding function $kf(\omega )$ for some constant k.

Previous studies have shown that low-frequency vortex oscillations occur around a hemisphere–cylinder body at different angles of attack, but the underlying mechanism is still unclear. In this study, we examine the origin of the vortex oscillation using numerical simulations and global linear stability analysis. The vortex oscillation is reproduced using numerical simulations, and the oscillatory modes are computed through dynamic mode decomposition (DMD). We obtain the base flow through a selective frequency damping method, which exhibits a pair of steady leeward vortices over the body. The four unstable modes are computed using a modified Arnoldi iteration. The antisymmetric mode with a Strouhal number of 0.105 is discovered to be responsible for the alternate oscillation of the vortex pair, and the mode with a Strouhal number of 0.220 corresponds to the in-phase vortex oscillation. Their frequencies have good agreement with the modes of DMD. The other two unstable modes with higher frequencies, one antisymmetric and one symmetric, are harmonic frequencies of the above two modes. The study conclusively verifies that the vortex oscillation over a hemisphere–cylinder body originates from a global flow instability.

This paper presents a comprehensive technical overview of the Linac Coherent Light Source II (LCLS-II) photoinjector laser system, its first and foremost component. The LCLS-II photoinjector laser system serves as an upgrade to the original LCLS at SLAC National Accelerator Laboratory. This advanced laser system generates high-quality laser beams for the LCLS-II, contributing to the instrument’s unprecedented brightness, precision and flexibility. Our discussion extends to the various subsystems that comprise the photoinjector, including the photocathode laser, laser heater and beam transport systems. Lastly, we draw attention to the ongoing research and development infrastructure underway to enhance the functionality and efficiency of the LCLS-II, and similar X-ray free-electron laser facilities around the world, thereby contributing to the future of laser technology and its applications.

Genes involved in melanin production directly impact insect pigmentation and can affect diverse physiology and behaviours. The role these genes have on sex behaviour, however, is unclear. In the present study, the crucial melanin pigment gene black was functionally characterised in an urban pest, the German cockroach, Blattella germanica. RNAi knockdown of B. germanica black (Bgblack) had no effect on survival, but did result in black pigmentation of the thoraxes, abdomens, heads, wings, legs, antennae, and cerci due to cuticular accumulation of melanin. Sex-specific variation in the pigmentation pattern was apparent, with females exhibiting darker coloration on the abdomen and thorax than males. Bgblack knockdown also resulted in wing deformation and negatively impacted the contact sex pheromone-based courtship behaviour of males. This study provides evidence for black function in multiple aspects of B. germanica biology and opens new avenues of exploration for novel pest control strategies.

Safe and socially compliant navigation in a crowded environment is essential for social robots. Numerous research efforts have shown the advantages of deep reinforcement learning techniques in training efficient policies, while most of them ignore fast-moving pedestrians in the crowd. In this paper, we present a novel design of safety measure, named Risk-Area, considering collision theory and motion characteristics of different robots and humans. The geometry of Risk-Area is formed based on the real-time relative positions and velocities of the agents in the environment. Our approach perceives risk in the environment and encourages the robot to take safe and socially compliant navigation behaviors. The proposed method is verified with three existing well-known deep reinforcement learning models in densely populated environments. Experiment results demonstrate that our approach combined with the reinforcement learning techniques can efficiently perceive risk in the environment and navigate the robot with high safety in the crowds with fast-moving pedestrians.