Omega-3 Polyunsaturated Fatty Acids (n-3 PUFAs), including alpha-linolenic acid (ALA), eicosapentaenoic acid (EPA), and docosahexaenoic acid (DHA), are widely found in plant oils and marine organisms. These fatty acids demonstrate significant biological effects, and their adequate intake is essential for maintaining health. However, modern diets often lack sufficient n-3 PUFAs, especially among populations that consume little fish or seafood,leading to a growing interest in n-3 PUFAs supplementation in nutrition and health research. In recent decades, the role of n-3 PUFAs in preventing and treating various diseases has gained increasing attention, particularly in cardiovascular, neurological, ophthalmic, allergic, hepatic, and oncological fields.In orthopedics, n-3 PUFAs exert beneficial effects through several mechanisms, including modulation of inflammatory responses, enhancement of cartilage repair, and regulation of bone metabolism. These effects demonstrate potential for the treatment of conditions such as osteoarthritis (OA), rheumatoid arthritis (RA), gout, osteoporosis (OP), fractures, sarcopenia, and spinal degenerative diseases (SDD). This review summarizes the clinical applications of n-3 PUFAs, with a focus on their research progress in the field of orthopedics, and explores their potential in the treatment of orthopedic diseases.

This paper provides an overview of the current status of ultrafast and ultra-intense lasers with peak powers exceeding 100 TW and examines the research activities in high-energy-density physics within China. Currently, 10 high-intensity lasers with powers over 100 TW are operational, and about 10 additional lasers are being constructed at various institutes and universities. These facilities operate either independently or are combined with one another, thereby offering substantial support for both Chinese and international research and development efforts in high-energy-density physics.

Laser-driven inertial confinement fusion (ICF) diagnostics play a crucial role in understanding the complex physical processes governing ICF and enabling ignition. During the ICF process, the interaction between the high-power laser and ablation material leads to the formation of a plasma critical surface, which reflects a significant portion of the driving laser, reducing the efficiency of laser energy conversion into implosive kinetic energy. Effective diagnostic methods for the critical surface remain elusive. In this work, we propose a novel optical diagnostic approach to investigate the plasma critical surface. This method has been experimentally validated, providing new insights into the critical surface morphology and dynamics. This advancement represents a significant step forward in ICF diagnostic capabilities, with the potential to inform strategies for enhancing the uniformity of the driving laser and target surface, ultimately improving the efficiency of converting laser energy into implosion kinetic energy and enabling ignition.

The past decade has evidenced the increased prevalence of irregularly spaced longitudinal data in social sciences. Clearly lacking, however, are modeling tools that allow researchers to fit dynamic models to irregularly spaced data, particularly data that show nonlinearity and heterogeneity in dynamical structures. We consider the issue of fitting multivariate nonlinear differential equation models with random effects and unknown initial conditions to irregularly spaced data. A stochastic approximation expectation–maximization algorithm is proposed and its performance is evaluated using a benchmark nonlinear dynamical systems model, namely, the Van der Pol oscillator equations. The empirical utility of the proposed technique is illustrated using a set of 24-h ambulatory cardiovascular data from 168 men and women. Pertinent methodological challenges and unresolved issues are discussed.

The seminal Bolgiano–Obukhov (BO) theory established the fundamental framework for turbulent mixing and energy transfer in stably stratified fluids. However, the presence of BO scalings remains debatable despite their being observed in stably stratified atmospheric layers and convective turbulence. In this study, we performed precise temperature measurements with 51 high-resolution loggers above the seafloor for 46 h on the continental shelf of the northern South China Sea. The temperature observation exhibits three layers with increasing distance from the seafloor: the bottom mixed layer (BML), the mixing zone and the internal wave zone. A BO-like scaling $\alpha =-1.34\pm 0.10$ is observed in the temperature spectrum when the BML is in a weakly stable stratified ($N\sim 0.0018$ rad s$^{-1}$) and strongly sheared ($Ri\sim 0.0027$) condition, whereas in the unstably stratified convective turbulence of the BML, the scaling $\alpha =-1.76\pm 0.10$ clearly deviated from the BO theory but approached the classical $-$5/3 scaling in isotropic turbulence. This suggests that the convective turbulence is not the promise of BO scaling. In the mixing zone, where internal waves alternately interact with the BML, the scaling follows the Kolmogorov scaling. In the internal wave zone, the scaling $\alpha =-2.12 \pm 0.15$ is observed in the turbulence range and possible mechanisms are provided.

Folate metabolism is involved in the development and progression of various cancers. We investigated the association of single nucleotide polymorphisms (SNP) in folate-metabolising genes and their interactions with serum folate concentrations with overall survival (OS) and liver cancer-specific survival (LCSS) of newly diagnosed hepatocellular carcinoma (HCC) patients. We detected the genotypes of six SNP in three genes related to folate metabolism: methylenetetrahydrofolate reductase (MTHFR), 5-methyltetrahydrofolate-homocysteine methyltransferase reductase (MTRR) and 5-methyltetrahydrofolate-homocysteine methyltransferase (MTR). Cox proportional hazard models were used to calculate multivariable-adjusted hazard ratios (HR) and 95 % CI. This analysis included 970 HCC patients with genotypes of six SNP, and 864 of them had serum folate measurements. During a median follow-up of 722 d, 393 deaths occurred, with 360 attributed to HCC. In the fully-adjusted models, the MTRR rs1801394 polymorphism was significantly associated with OS in additive (per G allele: HR = 0·84, 95 % CI: 0·71, 0·99), co-dominant (AG v. AA: HR = 0·77; 95 % CI: 0·62, 0·96) and dominant (AG + GG v. AA: HR = 0·78; 95 % CI: 0·63, 0·96) models. Carrying increasing numbers of protective alleles was linked to better LCSS (HR10–12 v. 2–6 = 0·70; 95 % CI: 0·49, 1·00) and OS (HR10–12 v. 2–6 = 0·67; 95 % CI: 0·47, 0·95). Furthermore, we observed significant interactions on both multiplicative and additive scales between serum folate levels and MTRR rs1801394 polymorphism. Carrying the variant G allele of the MTRR rs1801394 is associated with better HCC prognosis and may enhance the favourable association between higher serum folate levels and improved survival among HCC patients.

Choline and betaine are important in the body, from cell membrane components to methyl donors. We aimed to investigate trends in dietary intake and food sources of total choline, individual choline forms and betaine in Chinese adults using data from the China Health and Nutrition Survey (CHNS) 1991–2011, a prospective cohort with a multistage, random cluster design. Dietary intake was estimated using three consecutive 24-h dietary recalls in combination with a household food inventory. Linear mixed-effect models were constructed using R software. A total of 11 188 men and 12 279 women aged 18 years or older were included. Between 1991 and 2011, total choline intake increased from 219·3 (95 % CI 215·1, 223·4) mg/d to 269·0 (95 % CI 265·6, 272·5) mg/d in men and from 195·6 (95 % CI 191·8, 199·4) mg/d to 240·4 (95 % CI 237·4, 243·5) mg/d in women (both P-trends < 0·001). Phosphatidylcholine was the major form of dietary choline, and its contribution to total choline increased from 46·9 % in 1991 to 58·8 % in 2011. Cereals were the primary food source of total choline before 2000, while eggs had ranked at the top since 2004. Dietary betaine intake was relatively steady over time with a range of 134·0–151·5 mg/d in men (P-trend < 0·001) and 111·7–125·3 mg/d in women (P-trend > 0·05). Chinese adults experienced a significant increase in dietary intake of choline, particularly phosphatidylcholine during 1991–2011 and animal-derived foods have replaced plant-based foods as the main food sources of choline. Betaine intake remained relatively stable over time. Future efforts should address the health effects of these changes.

Previous animal studies found beneficial effects of choline and betaine on maternal glucose metabolism during pregnancy, but few human studies explored the association between choline or betaine intake and incident gestational diabetes mellitus (GDM). We aimed to explore the correlation of dietary choline or betaine intake with GDM risk among Chinese pregnant women. A total of 168 pregnant women with GDM cases and 375 healthy controls were enrolled at the Seventh People’s Hospital in Shanghai during their GDM screening at 24–28 gestational weeks. A validated semi-quantitative FFQ was used to estimate choline and betaine consumption through face-to-face interviews. An unconditional logistic regression model was adopted to examine OR and 95 % CI. Compared with the controls, those women with GDM incidence were likely to have higher pre-pregnancy BMI, be older, have more parities and have higher plasma TAG and lower plasma HDL-cholesterol. No significant correlation was observed between the consumption of choline or betaine and incident GDM (adjusted OR (95 % CI), 0·77 (0·41, 1·43) for choline; 0·80 (0·42, 1·52) for betaine). However, there was a significant interaction between betaine intake and parity on the risk of GDM (Pfor interaction = 0·01). Among those women with no parity history, there was a significantly inverse correlation between betaine intake and GDM risk (adjusted OR (95 % CI), 0·25 (0·06, 0·81)). These findings indicated that higher dietary betaine intake during pregnancy might be considered a protective factor for GDM among Chinese women with no parity history.

We investigate the linear instability of two-layer stratified shear flows in a sloping two-dimensional channel, subject to non-zero longitudinal gravitational forces. We reveal three previously unknown instabilities, distinct from the well-known Kelvin–Helmholtz instability and Holmboe wave instability, in that they have longer wavelengths (of the order of 10 to $10^3$ shear-layer depths) and often slower growth rates. Importantly, they can grow in background flows with gradient Richardson number $\gg 1$, which offers a new mechanism to sustain turbulence and mixing in strongly stratified flows. These instabilities are shown to be generic and relatively insensitive to Reynolds number, Prandtl number, base flow profile and boundary conditions. The nonlinear evolution of these instabilities is investigated through a forced direct numerical simulation, in which the background momentum and density are sustained. The growth of long unstable waves in background flows initially stable to short wave causes a decrease in the local gradient Richardson number. This leads to local nonlinear processes that result in small-scale overturns resembling Kelvin–Helmholtz billows. Our results establish a new energy exchange pathway, where the mean kinetic energy of a strongly stratified flow is extracted by primary unstable long waves and secondary short waves, and subsequently dissipated into internal energy.

We develop a physics-informed neural network (PINN) to significantly augment state-of-the-art experimental data of stratified flows. A fully connected deep neural network is trained using time-resolved experimental data in a salt-stratified inclined duct experiment, consisting of three-component velocity fields and density fields measured simultaneously in three dimensions at Reynolds number $= O(10^3)$ and at Prandtl or Schmidt number $=700$. The PINN enforces incompressibility, the governing equations for momentum and buoyancy, and the boundary conditions at the duct walls. These physics-constrained, augmented data are output at an increased spatio-temporal resolution and demonstrate five key results: (i) the elimination of measurement noise; (ii) the correction of distortion caused by the scanning measurement technique; (iii) the identification of weak but dynamically important three-dimensional vortices of Holmboe waves; (iv) the revision of turbulent energy budgets and mixing efficiency; and (v) the prediction of the latent pressure field and its role in the observed asymmetric Holmboe wave dynamics. These results mark a significant step forward in furthering the reach of experiments, especially in the context of stratified turbulence, where accurately computing three-dimensional gradients and resolving small scales remain enduring challenges.

Accurately predicting neurosyphilis prior to a lumbar puncture (LP) is critical for the prompt management of neurosyphilis. However, a valid and reliable model for this purpose is still lacking. This study aimed to develop a nomogram for the accurate identification of neurosyphilis in patients with syphilis. The training cohort included 9,504 syphilis patients who underwent initial neurosyphilis evaluation between 2009 and 2020, while the validation cohort comprised 526 patients whose data were prospectively collected from January 2021 to September 2021. Neurosyphilis was observed in 35.8% (3,400/9,504) of the training cohort and 37.6% (198/526) of the validation cohort. The nomogram incorporated factors such as age, male gender, neurological and psychiatric symptoms, serum RPR, a mucous plaque of the larynx and nose, a history of other STD infections, and co-diabetes. The model exhibited good performance with concordance indexes of 0.84 (95% CI, 0.83–0.85) and 0.82 (95% CI, 0.78–0.86) in the training and validation cohorts, respectively, along with well-fitted calibration curves. This study developed a precise nomogram to predict neurosyphilis risk in syphilis patients, with potential implications for early detection prior to an LP.

Few studies have evaluated the joint effect of trace elements on spontaneous preterm birth (SPTB). This study aimed to examine the relationships between the individual or mixed maternal serum concentrations of Fe, Cu, Zn, Se, Sr and Mo during pregnancy, and risk of SPTB. Inductively coupled plasma MS was employed to determine maternal serum concentrations of the six trace elements in 192 cases with SPTB and 282 controls with full-term delivery. Multivariate logistic regression, weighted quantile sum regression (WQSR) and Bayesian kernel machine regression (BKMR) were used to evaluate the individual and joint effects of trace elements on SPTB. The median concentrations of Sr and Mo were significantly higher in controls than in SPTB group (P < 0·05). In multivariate logistic regression analysis, compared with the lowest quartile levels of individual trace elements, the third- and fourth-quartile Sr or Mo concentrations were significantly associated with reduced risk of SPTB with adjusted OR (aOR) of 0·432 (95 CI < 0·05). In multivariate logistic regression analysis, compared with the lowest quartile levels of individual trace elements, the third- and fourth-quartile Sr or Mo concentrations were significantly associated with reduced risk of SPTB with adjusted aOR of 0·432 (95 % CI 0·247, 0·756), 0·386 (95 % CI 0·213, 0·701), 0·512 (95 % CI 0·297, 0·883) and 0·559 (95 % CI 0·321, 0·972), respectively. WQSR revealed the inverse combined effect of the trace elements mixture on SPTB (aOR = 0·368, 95 % CI 0·228, 0·593). BKMR analysis confirmed the overall mixture of the trace elements was inversely associated with the risk of SPTB, and the independent effect of Sr and Mo was significant. Our findings suggest that the risk of SPTB decreased with concentrations of the six trace elements, with Sr and Mo being the major contributors.

In order to establish a compact all-optical Thomson scattering source, experimental studies were conducted on the 45 TW Ti: sapphire laser facility. By including a steel wafer, mixed gas, and plasma mirror into a double-exit jet, several mechanisms, such as shock-assisted ionization injection, ionization injection, and driving laser reflection, were integrated into one source. So, the source of complexity was remarkably reduced. Electron bunches with central energy fluctuating from 90 to 160 MeV can be produced. Plasma mirrors were used to reflect the driving laser. The scattering of the reflected laser on the electron bunches led to the generation of X-ray photons. Through comparing the X-ray spots under different experimental conditions, it is confirmed that the X-ray photons are generated by Thomson scattering. For further application, the energy spectra and source size of the Thomson scattering source were measured. The unfolded spectrum contains a large amount of low-energy photons besides a peak near 67 keV. Through importing the electron energy spectrum into the Monte Carlo simulation code, the different contributions of the photons with small and large emitting angles can be used to explain the origin of the unfolded spectrum. The maximum photon energy extended to about 500 keV. The total photon production was 107/pulse. The FWHM source size was about 12 μm.

Illite is a distinctive clay mineral formed by K alteration within hydrothermal alteration zones in porphyry Cu deposits. Based on differences in spatial distribution, Kübler index, number of swelling layers, and polytype, two kinds of illite are recognized within the Dexing porphyry Cu deposit, East China. One is a hydrothermal mineral within hydrothermally-altered granodiorite porphyry and altered tuffaceous phyllite near the contact zone with the granodiorite porphyry cupola. The hydrothermal illite is formed by illitization of plagioclase and/or micas during hydrothermal fluid-rock interaction. The considerable variation of their higher Kübler indices (0.17–1.41°Δ2θ) with swelling layer is affected by fluid/rock ratio or fluid flux. The other type of illite is a product of low-grade metamorphism within tuffaceous phyllite away from the porphyry cupola (>2 km), and has a lower Kübler index (0.06–0.13°Δ2θ), a 2M1 polytype, and no swelling layers. We suggest that, within the mineralized alteration zone, the lower the Kübler index, the stronger the degree of alteration, and the higher the copper grade. This is caused by a higher fluid/rock ratio in the middle-upper portions of the contact zone.

Mineral-microbe interactions are widespread in a number of environmental processes such as mineral weathering, decomposition, and transformation. Both clay minerals and silicate-weathering bacteria are widely distributed in nature, and the latter contribute to weathering, diagenesis, and mineralization of major rock-forming minerals. The purpose of this study was to observe changes in the chemical composition and structure, especially the phase transformation, of smectite after processing by a silicate-weathering bacterium. The interaction between Bacillus mucilaginosus and bentonite was studied using custom culture media. Results from Inductively Coupled Plasma-Atomic Emission Spectrometry revealed that the bacterium promoted release of Si and Al from solid bentonite to solution. Concomitantly, the Ka nd Fe contents of the mineral increased as shown by X-ray photoelectron spectroscopy results. After interaction with the bacterium, the montmorillonite underwent a possible structure transformation to smectite, as indicated by the emergence of a new weak peak (d = 9.08 Å) shown by X-ray diffraction patterns. The mineralogical changes were also demonstrated by the decrease in the specific surface area of the mineral from 33.0 to 24.0 m2/g (these lower values for SSA of bentonite are related to the particle size of the smectite examined (120-160 mesh) and the weakened absorption bands in Al-O-H and Si-O-Si vibrations by Micro Fourier-transform infrared spectroscopy. The morphology changes in the bacteria observed by environmental scanning electron microscopy and atomic force microscopy revealed an obvious growth of the flagella in the presence of bentonite.

We introduce a geometric analysis of turbulent mixing in density-stratified flows based on the alignment of the density gradient in two orthogonal bases that are locally constructed from the velocity gradient tensor. The first basis connects diapycnal mixing to rotation and shearing motions, building on the recent ‘rortex–shear decomposition’ in stratified shear layers (Jiang et al., J. Fluid Mech., vol. 947, 2022, A30), while the second basis connects mixing to the principal axes of the viscous dissipation tensor. Applying this framework to datasets taken in the stratified inclined duct laboratory experiment reveals that density gradients in locations of high shear tend to align preferentially (i) along the direction of minimum dissipation and (ii) normal to the plane spanned by the rortex and shear vectors. The analysis of the local alignment across increasingly turbulent flows offers new insights into the intricate relationship between the density gradient and dissipation, and thus diapycnal mixing.

The stratified inclined duct (SID) sustains an exchange flow in a long, gently sloping duct as a model for continuously forced density-stratified flows such as those found in estuaries. Experiments have shown that the emergence of interfacial waves and their transition to turbulence as the tilt angle is increased appears to be linked to a threshold in the exchange flow rate given by inviscid two-layer hydraulics. We uncover these hydraulic mechanisms by (i) using recent direct numerical simulations (DNS) providing full flow data in the key flow regimes (Zhu et al., J. Fluid Mech., vol. 969, 2023, A20), (ii) averaging these DNS into two layers, and (iii) using an inviscid two-layer shallow-water and instability theory to diagnose interfacial wave behaviour and provide physical insight. The laminar flow is subcritical and stable throughout the duct and hydraulically controlled at the ends of the duct. As the tilt is increased, the flow becomes supercritical everywhere and unstable to long waves. An internal jump featuring stationary waves first appears near the centre of the duct, then leads to larger-amplitude travelling waves, and to stronger jumps, wave breaking and intermittent turbulence at the largest tilt angle. Long waves described by the (nonlinear) shallow-water equation are interpreted locally as linear waves on a two-layer parallel base flow described by the Taylor–Goldstein equation. This link helps us to interpret long-wave instability and contrast it with short-wave (e.g. Kelvin–Helmholtz) instability. Our results suggest a transition to turbulence in SID through long-wave instability relying on vertical confinement by the top and bottom walls.

Manipulation of T cells has revolutionized cancer immunotherapy. Notably, the use of T cells carrying engineered T cell receptors (TCR-T) offers a favourable therapeutic pathway, particularly in the treatment of solid tumours. However, major challenges such as limited clinical response efficacy, off-target effects and tumour immunosuppressive microenvironment have hindered the clinical translation of this approach. In this review, we mainly want to guide TCR-T investigators on several major issues they face in the treatment of solid tumours after obtaining specific TCR sequences: (1) whether we have to undergo affinity maturation or not, and what parameter we should use as a criterion for being more effective. (2) What modifications can be added to counteract the tumour inhibitory microenvironment to make our specific T cells to be more effective and what is the safety profile of such modifications? (3) What are the new forms and possibilities for TCR-T cell therapy in the future?

This study aimed to investigate the optimal frozen embryo transfer (FET) strategy for recurrent implantation failure (RIF) patients with three consecutive failed cleaved embryo implantations and no blastocyst preservation. This retrospective analysis was divided into three groups based on the FET strategy: thawed day 3 embryo transfer (D3 FET group); and extended culture of frozen–thawed day 3 embryos to day 5 blastocysts transfer (D3–D5 FET group); thawed blastocyst transfer (D5 FET group). Transplant cycle data were compared between the three groups. In total, 43.8% of vitrified–thawed cleavage embryos developed into blastocysts. Analysis of the three transplantation strategies showed that, compared with the D3 FET group, D3–D5 had a significantly better hCG-positivity rate and live-birth rate (P < 0.05). Pregnancy outcomes in the D3–D5 FET group and D5 FET group were similar regarding hCG-positivity rate, implantation rate, clinical pregnancy rate, and live-birth rate. Our findings propose two potentially valuable transfer strategies for patients experiencing repeated implantation failures. The D3–D5 FET approach presents a greater potential for selecting promising embryos in cases without blastocyst preservation; however, this strategy does entail the risk of cycle cancellation. Conversely, in instances where blastocyst preservation is an option, prioritizing consideration of the D5 FET strategy is recommended.