The Eighth World Congress of Pediatric Cardiology and Cardiac Surgery (WCPCCS) will be held in Washington DC, USA, from Saturday, 26 August, 2023 to Friday, 1 September, 2023, inclusive. The Eighth World Congress of Pediatric Cardiology and Cardiac Surgery will be the largest and most comprehensive scientific meeting dedicated to paediatric and congenital cardiac care ever held. At the time of the writing of this manuscript, The Eighth World Congress of Pediatric Cardiology and Cardiac Surgery has 5,037 registered attendees (and rising) from 117 countries, a truly diverse and international faculty of over 925 individuals from 89 countries, over 2,000 individual abstracts and poster presenters from 101 countries, and a Best Abstract Competition featuring 153 oral abstracts from 34 countries. For information about the Eighth World Congress of Pediatric Cardiology and Cardiac Surgery, please visit the following website: [www.WCPCCS2023.org]. The purpose of this manuscript is to review the activities related to global health and advocacy that will occur at the Eighth World Congress of Pediatric Cardiology and Cardiac Surgery.

Acknowledging the need for urgent change, we wanted to take the opportunity to bring a common voice to the global community and issue the Washington DC WCPCCS Call to Action on Addressing the Global Burden of Pediatric and Congenital Heart Diseases. A copy of this Washington DC WCPCCS Call to Action is provided in the Appendix of this manuscript. This Washington DC WCPCCS Call to Action is an initiative aimed at increasing awareness of the global burden, promoting the development of sustainable care systems, and improving access to high quality and equitable healthcare for children with heart disease as well as adults with congenital heart disease worldwide.

Suicide mortality rates are a strong indicator of population mental-health and can be used to determine the efficacy of prevention measures. Monitoring suicide mortality rates in real-time provides an evidence-base to inform targeted interventions in a timely manner and accelerate suicide prevention responses. This paper outlines the importance of real-time suicide surveillance in the context of policy and practice, with a particular focus on public health and humanitarian crises.

Policies that promote conversion of antibiotics from intravenous to oral route administration are considered “low hanging fruit” for hospital antimicrobial stewardship programs. We developed a simple metric based on digestive days of therapy divided by total days of therapy for targeted agents and a method for hospital comparisons. External comparisons may help identify opportunities for improving prospective implementation.

Milk is a source of several nutrients which may be beneficial for skeletal muscle. Evidence that links lower milk intake with declines in muscle strength from midlife to old age is lacking. We used data from the Medical Research Council National Survey of Health and Development to test sex-specific associations between milk consumption from age 36 to 60–64 years, low grip strength (GS) or probable sarcopenia, and GS decline from age 53 to 69 years. We included 1340 men and 1383 women with at least one measure of both milk intake and GS. Milk intake was recorded in 5-d food diaries (aged 36, 43, 53 and 60–64 years), and grand mean of total, reduced-fat and full-fat milk each categorised in thirds (T1 (lowest) to T3 (highest), g/d). GS was assessed at ages 53, 60–64, and 69 years, and probable sarcopenia classified at the age of 69 years. We employed logistic regression to examine the odds of probable sarcopenia and multilevel models to investigate decline in GS in relation to milk intake thirds. Compared with T1, only T2 (58·76–145·25 g/d) of reduced-fat milk was associated with lower odds of sex-specific low GS at the age of 69 years (OR (95 % CI): 0·59 (0·37, 0·94), P = 0·03). In multilevel models, only T3 of total milk (≥ 237·52 g/d) was associated with stronger GS in midlife in men (β (95 % CI) = 1·82 (0·18, 3·45) kg, P = 0·03) compared with T1 (≤ 152·0 g/d), but not with GS decline over time. A higher milk intake across adulthood may promote muscle strength in midlife in men. Its role in muscle health in late life needs further examination.

A chloroacetamide herbicide by application timing factorial experiment was conducted in 2017 and 2018 in Mississippi to investigate chloroacetamide use in a dicamba-based Palmer amaranth management program in cotton production. Herbicides used were S-metolachlor or acetochlor, and application timings were preemergence, preemergence followed by (fb) early postemergence, preemergence fb late postemergence, early postemergence alone, late postemergence alone, and early postemergence fb late postemergence. Dicamba was included in all preemergence applications, and dicamba plus glyphosate was included with all postemergence applications. Differences in cotton and weed response due to chloroacetamide type were minimal, and cotton injury at 14 d after late postemergence application was less than 10% for all application timings. Late-season weed control was reduced up to 30% and 53% if chloroacetamide application occurred preemergence or late postemergence only, respectively. Late-season weed densities were minimized if multiple applications were used instead of a single application. Cotton height was reduced by up to 23% if a single application was made late postemergence relative to other application timings. Chloroacetamide application at any timing except preemergence alone minimized late-season weed biomass. Yield was maximized by any treatment involving multiple applications or early postemergence alone, whereas applications preemergence or late postemergence alone resulted in up to 56% and 27% yield losses, respectively. While no yield loss was reported by delaying the first of sequential applications until early postemergence, forgoing a preemergence application is not advisable given the multiple factors that may delay timely postemergence applications such as inclement weather.

Acifluorfen is a nonsystemic PPO-inhibiting herbicide commonly used for POST Palmer amaranth control in soybean, peanut, and rice across the southern United States. Concerns have been raised regarding herbicide selection pressure and particle drift, increasing the need for application practices that optimize herbicide efficacy while mitigating spray drift. Field research was conducted in 2016, 2017, and 2018 in Mississippi and Nebraska to evaluate the influence of a range of spray droplet sizes [150 μm (Fine) to 900 μm (Ultra Coarse)], using acifluorfen to create a novel Palmer amaranth management recommendation using pulse width modulation (PWM) technology. A pooled site-year generalized additive model (GAM) analysis suggested that 150-μm (Fine) droplets should be used to obtain the greatest Palmer amaranth control and dry biomass reduction. Nevertheless, GAM models indicated that only 7.2% of the variability observed in Palmer amaranth control was due to differences in spray droplet size. Therefore, location-specific GAM analyses were performed to account for geographical differences to increase the accuracy of prediction models. GAM models suggested that 250-μm (Medium) droplets optimize acifluorfen efficacy on Palmer amaranth in Dundee, MS, and 310-μm (Medium) droplets could sustain 90% of maximum weed control. Specific models for Beaver City, NE, indicated that 150-μm (Fine) droplets provide maximum Palmer amaranth control, and 340-μm (Medium) droplets could maintain 90% of greatest weed control. For Robinsonville, MS, optimal Palmer amaranth control could be obtained with 370-μm (Coarse) droplets, and 90% maximum control could be sustained with 680 μm (Ultra Coarse) droplets. Differences in optimal droplet size across location could be a result of convoluted interactions between droplet size, weather conditions, population density, plant morphology, and soil fertility levels. Future research should adopt a holistic approach to identify and investigate the influence of environmental and application parameters to optimize droplet size recommendations.

Herbicide applications performed with pulse width modulation (PWM) sprayers to deliver specific spray droplet sizes could maintain product efficacy, minimize potential off-target movement, and increase flexibility in field operations. Given the continuous expansion of herbicide-resistant Palmer amaranth populations across the southern and midwestern United States, efficacious and cost-effective means of application are needed to maximize Palmer amaranth control. Experiments were conducted in two locations in Mississippi (2016, 2017, and 2018) and one location in Nebraska (2016 and 2017) for a total of 7 site-years. The objective of this study was to evaluate the influence of a range of spray droplet sizes [150 (Fine) to 900 μm (Ultra Coarse)] on lactofen and acifluorfen efficacy for Palmer amaranth control. The results of this research indicated that spray droplet size did not influence lactofen efficacy on Palmer amaranth. Palmer amaranth control and percent dry-biomass reduction remained consistent with lactofen applied within the aforementioned droplet size range. Therefore, larger spray droplets should be used as part of a drift mitigation approach. In contrast, acifluorfen application with 300-μm (Medium) spray droplets provided the greatest Palmer amaranth control. Although percent biomass reduction was numerically greater with 300-μm (Medium) droplets, results did not differ with respect to spray droplet size, possibly as a result of initial plant injury, causing weight loss, followed by regrowth. Overall, 900-μm (Ultra Coarse) droplets could be used effectively without compromising lactofen efficacy on Palmer amaranth, and 300-μm (Medium) droplets should be used to achieve maximum Palmer amaranth control with acifluorfen.

Field experiments were conducted in 2012 and 2013 across four locations for a total of 6 site-years in the midsouthern United States to determine the effect of growth stage at exposure on soybean sensitivity to sublethal rates of dicamba (8.8 g ae ha−1) and 2,4-D (140 g ae ha−1). Regression analysis revealed that soybean was most susceptible to injury from 2,4-D when exposed between 413 and 1,391 accumulated growing degree days (GDD) from planting, approximately between V1 and R2 growth stages. In terms of terminal plant height, soybean was most susceptible to 2,4-D between 448 and 1,719 GDD, or from V1 to R4. However, maximum susceptibility to 2,4-D was only between 624 and 1,001 GDD or from V3 to V5 for yield loss. As expected, soybean was sensitive to dicamba for longer spans of time, ranging from 0 to 1,162 GDD for visible injury or from emergence to R2. Likewise, soybean height was most affected when dicamba exposure occurred between 847 and 1,276 GDD or from V4 to R2. Regarding grain yield, soybean was most susceptible to dicamba between 820 and 1,339 GDD or from V4 to R2. Consequently, these data indicate that soybean response to 2,4-D and dicamba can be variable within vegetative or reproductive growth stages; therefore, specific growth stage at the time of exposure should be considered when evaluating injury from off-target movement. In addition, application of dicamba near susceptible soybean within the V4 to R2 growth stages should be avoided because this is the time of maximum susceptibility. Research regarding soybean sensitivity to 2,4-D and dicamba should focus on multiple exposure times and also avoid generalizing growth stages to vegetative or reproductive.

Recent commercialization of auxin herbicide–based weed control systems has led to increased off-target exposure of susceptible cotton cultivars to auxin herbicides. Off-target deposition of dilute concentrations of auxin herbicides can occur on cotton at any stage of growth. Field experiments were conducted at two locations in Mississippi from 2014 to 2016 to assess the response of cotton at various growth stages after exposure to a sublethal 2,4-D concentration of 8.3 g ae ha−1. Herbicide applications occurred weekly from 0 to 14 weeks after emergence (WAE). Cotton exposure to 2,4-D at 2 to 9 WAE resulted in up to 64% visible injury, whereas 2,4-D exposure 5 to 6 WAE resulted in machine-harvested yield reductions of 18% to 21%. Cotton maturity was delayed after exposure 2 to 10 WAE, and height was increased from exposure 6 to 9 WAE due to decreased fruit set after exposure. Total hand-harvested yield was reduced from 2,4-D exposure 3, 5 to 8, and 13 WAE. Growth stage at time of exposure influenced the distribution of yield by node and position. Yield on lower and inner fruiting sites generally decreased from exposure, and yield partitioned to vegetative or aborted positions and upper fruiting sites increased. Reductions in gin turnout, micronaire, fiber length, fiber-length uniformity, and fiber elongation were observed after exposure at certain growth stages, but the overall effects on fiber properties were small. These results indicate that cotton is most sensitive to low concentrations of 2,4-D during late vegetative and squaring growth stages.

The introduction of auxin herbicide weed control systems has led to increased occurrence of crop injury in susceptible soybeans and cotton. Off-target exposure to sublethal concentrations of dicamba can occur at varying growth stages, which may affect crop response. Field experiments were conducted in Mississippi in 2014, 2015, and 2016 to characterize cotton response to a sublethal concentration of dicamba equivalent to 1/16X the labeled rate. Weekly applications of dicamba at 35 g ae ha−1 were made to separate sets of replicated plots immediately following planting until 14 wk after emergence (WAE). Exposure to dicamba from 1 to 9 WAE resulted in up to 32% visible injury, and exposure from 7 to 10 WAE delayed crop maturity. Exposure from 8 to 10 and 13 WAE led to increased cotton height, while an 18% reduction in machine-harvested yield resulted from exposure at 6 WAE. Cotton exposure at 3 to 9 WAE reduced the seed cotton weight partitioned to position 1 fruiting sites, while exposure at 3 to 6 WAE also reduced yield in position 2 fruiting sites. Exposure at 2, 3, and 5 to 7 WAE increased the percent of yield partitioned to vegetative branches. An increase in percent of yield partitioned to plants with aborted terminals occurred following exposure from 3 to 7 WAE and corresponded with reciprocal decreases in yield partitioned to positional fruiting sites. Minimal effects were observed on fiber quality, except for decreases in fiber length uniformity resulting from exposure at 9 and 10 WAE.

Multi-sire mating of a mob of ewes is commonly used in commercial sheep production systems. However, ram mating success (defined as the number of lambs sired by an individual) can vary between rams in the mating group. If this trait was repeatable and heritable, selection of rams capable of siring larger numbers of lambs could reduce the number of rams required for mating and ultimately lead to increased genetic gain. However, genetic correlations with other productive traits, such as growth and female fertility, could influence the potential for ram mating success to be used as a selection trait. In order to investigate this trait, parentage records (including accuracy of sire assignment) from 15 commercial ram breeding flocks of various breeds were utilised to examine the repeatability and heritability of ram mating success in multi-sire mating groups. In addition, genetic and phenotypic correlations with growth and female fertility traits were estimated using ASReml. The final model used for the ram mating success traits included age of the ram and mating group as fixed effects. Older rams (3+years old) had 15% to 20% greater mating success than younger rams (1 or 2 years of age). Increasing the stringency of the criteria for inclusion of both an individual lamb, based on accuracy of sire assignment, or a whole mating group, based on how many lambs had an assigned sire, increased repeatability and heritability estimates of the ram mating success traits examined. With the most stringent criteria employed, where assignment of sire accuracy was >0.95 and the total number of lambs in the progeny group that failed to have a sire assigned was<0.05, repeatability and heritability for loge(number of lambs) was 0.40±0.09 and 0.26±0.12, respectively. For proportion of lambs sired, repeatability and heritability were both 0.30±0.09. The two ram mating traits (loge(nlamb) and proportion) were highly correlated, both phenotypically and genetically (0.88±0.01 and 0.94±0.06, respectively). Both phenotypic and genetic correlations between ram mating success and growth and other female fertility traits were low and non-significant. In conclusion, there is scope to select rams capable of producing high numbers of progeny and thus increase selection pressure on rams to increase genetic gain.