Dilated cardiomyopathy (DCM) is a leading cause of heart failure and the most common indication for a heart transplant. Guidelines are regularly based on studies of adults and applied to the young. Children and adolescents diagnosed with DCM face different lifestyle challenges from individuals diagnosed in adulthood that include medical trauma and are influenced by maturity levels and confidence with advocacy to adults.

Using a UK patient-scientist’s perspective, we reviewed the age-specific challenges faced by the young with DCM, evaluated current guidelines and evidence, and identified areas requiring further recommendations and research. We highlight the importance of (i) the transition clinic from paediatric to adult services, (ii) repeated signposting to mental health services, (iii) standardised guidance on physical activity, (iv) caution surrounding alcohol and smoking, (v) the dangers of illegal drugs, and (vi) reproductive options and health.

Further research is needed to address the many uncertainties in these areas with respect to young age, particularly for physical activity, and such guidance would be welcomed by the young with DCM who must come to terms with being different and more limited amongst healthy peers.

North Carolina growers have long struggled to control Italian ryegrass, and recent research has confirmed that some Italian ryegrass biotypes have become resistant to nicosulfuron, glyphosate, clethodim, and paraquat. Integrating alternative management strategies is crucial to effectively control such biotypes. The objectives of this study were to evaluate Italian ryegrass control with cover crops and fall-applied residual herbicides and investigate cover crop injury from residual herbicides. This study was conducted during the fall/winter of 2021–22 in Salisbury, NC, and fall/winter of 2021–22 and 2022–23 in Clayton, NC. The study was designed as a 3 × 5 split-plot in which the main plot consisted of three cover crop treatments (no-cover, cereal rye at 80 kg ha−1, and crimson clover at 18 kg ha−1), and the subplots consisted of five residual herbicide treatments (S-metolachlor, flumioxazin, metribuzin, pyroxasulfone, and nontreated). In the 2021–22 season at Clayton, metribuzin injured cereal rye and crimson clover 65% and 55%, respectively. However, metribuzin injured both cover crops ≤6% in 2022–23. Flumioxazin resulted in unacceptable crimson clover injury of 50% and 38% in 2021–22 and 2022–23 in Clayton and 40% in Salisbury, respectively. Without preemergence herbicides, cereal rye controlled Italian ryegrass by 85% and 61% at 24 wk after planting in 2021–22 and 2022–23 in Clayton and 82% in Salisbury, respectively. In 2021–22, Italian ryegrass seed production was lowest in cereal rye plots at both locations, except when it was treated with metribuzin. For example, in Salisbury, cereal rye plus metribuzin resulted in 39,324 seeds m–2, compared to ≤4,386 seeds m–2 from all other cereal rye treatments. In 2022–23, Italian ryegrass seed production in cereal rye was lower when either metribuzin or pyroxasulfone were used preemergence (2,670 and 1,299 seeds m–2, respectively) compared with cereal rye that did not receive an herbicide treatment (5,600 seeds m–2). cereal rye (Secale cereale L.) and crimson clover (Trifolium incarnatum L.)

Leptospira are bacteria that cause leptospirosis in both humans and animals. Human Leptospira infections in Uganda are suspected to arise from animal–human interactions. From a nationwide survey to determine Leptospira prevalence and circulating sequence types in Uganda, we tested 2030 livestock kidney samples, and 117 small mammals (rodents and shrews) using real-time PCR targeting the lipL32 gene. Pathogenic Leptospira species were detected in 45 livestock samples but not in the small mammals. The prevalence was 6.12% in sheep, 4.25% in cattle, 2.08% in goats, and 0.46% in pigs. Sequence typing revealed that Leptospira borgpetersenii, Leptospira kirschneri, and Leptospira interrogans are widespread across Uganda, with 13 novel sequence types identified. These findings enhance the East African MLST database and support the hypothesis that domesticated animals may be a source of human leptospirosis in Uganda, highlighting the need for increased awareness among those in close contact with livestock.

The aim of this paper is to characterise the internal structures and ice-flow history of representative valley glaciers in Svalbard and infer from them dynamic changes over centennial timescales. Three polythermal and one cold valley glacier are investigated using field- and laboratory-based techniques and remote sensing. Structures along flow-unit boundaries indicate that ice-flow configuration in three of the glaciers has remained stable spanning the residence time of the ice. Deformation of a flow-unit boundary in the fourth reveals an ice-flow instability, albeit one that has been maintained since its most recent advance. Macro-crystallographic, sedimentological and isotopic analyses indicate that basal ice is elevated to the glacier surface, as shown by entrained sediments and enrichment in heavy isotopes. In narrow zones of enhanced cumulative strain, new ice facies are generated through dynamic recrystallisation. The surface density of longitudinal foliation is shown to represent the relative magnitude of cumulative strain. Geometric similarities between flow-unit boundaries in Svalbard valley glaciers and larger scale longitudinal surface structures in ice sheets suggest that deformation mechanisms are common to both.

From the safety inside vehicles, Knowsley Safari offers visitors a close-up encounter with captive olive baboons. As exiting vehicles may be contaminated with baboon stool, a comprehensive coprological inspection was conducted to address public health concerns. Baboon stools were obtained from vehicles, and sleeping areas, inclusive of video analysis of baboon–vehicle interactions. A purposely selected 4-day sampling period enabled comparative inspections of 2662 vehicles, with a total of 669 baboon stools examined (371 from vehicles and 298 from sleeping areas). As informed by our pilot study, front-line diagnostic methods were: QUIK-CHEK rapid diagnostic test (RDT) (Giardia and Cryptosporidium), Kato–Katz coproscopy (Trichuris) and charcoal culture (Strongyloides). Some 13.9% of vehicles were contaminated with baboon stool. Prevalence of giardiasis was 37.4% while cryptosporidiosis was <0.01%, however, an absence of faecal cysts by quality control coproscopy, alongside lower than the expected levels of Giardia-specific DNA, judged RDT results as misleading, grossly overestimating prevalence. Prevalence of trichuriasis was 48.0% and strongyloidiasis was 13.7%, a first report of Strongyloides fuelleborni in UK. We advise regular blanket administration(s) of anthelminthics to the colony, exploring pour-on formulations, thereafter, smaller-scale indicator surveys would be adequate.

Computational design tools allow the generation of vast numbers of possible designs, entrusting the human designer with describing constraints or specifications to guide exploration of the design space. Designers can have many different decision considerations when conducting this type of exploration, including form, function, users, or context. In this work, we investigate strategies that emerge when people are tasked with exploring a large design space within either a non-immersive (2D) or immersive (VR) interface and equipped with action-based interactions to set or envision specifications related to their considerations. Results from a 28 participant user study uncovers that people have varying strategies to enact their decision considerations that are not unique to the type of interface. However, the interfaces differ in perceptions of enabling breadth or depth of exploration holistically, with preference towards 2D interfaces to compare options, and VR to understand single designs. These results have implications for the user experience of systems that allow designers to explore the outputs of large design spaces, both at the interaction and interface levels.

Most of our understanding of moving contact lines relies on the limit of small capillary number ${Ca}$. This means the contact line speed is small compared to the capillary speed $\gamma /\eta$, where $\gamma$ is the surface tension and $\eta$ the viscosity, so that the interface is only weakly curved. The majority of recent analytical work has assumed in addition that the angle between the free surface and the substrate is also small, so that lubrication theory can be used. Here, we calculate the shape of the interface near a slip surface for arbitrary angles, and for two phases of arbitrary viscosities, thereby removing a key restriction in being able to apply small capillary number theory. Comparing with full numerical simulations of the viscous flow equation, we show that the resulting theory provides an accurate description up to $Ca \approx 0.1$ in the dip coating geometry, and a major improvement over theories proposed previously.

Commercialization of 2,4-D–tolerant crops is a major concern for sweetpotato producers because of potential 2,4-D drift that can cause severe crop injury and yield reduction. A field study was initiated in 2014 and repeated in 2015 to assess impacts of reduced rates of 2,4-D, glyphosate, or a combination of 2,4-D with glyphosate on sweetpotato. In one study, 2,4-D and glyphosate were applied alone and in combination at 1/10, 1/100, 1/250, 1/500, 1/750, and 1/1,000 of anticipated field use rates (1.05 kg ha−1 for 2,4-D and 1.12 kg ha−1 for glyphosate) to ‘Beauregard’ sweetpotato at storage root formation (10 days after transplanting [DAP]). In a separate study, all these treatments were applied to ‘Beauregard’ sweetpotato at storage root development (30 DAP). Injury with 2,4-D alone or in combination with glyphosate was generally equal or greater than with glyphosate applied alone at equivalent herbicide rates, indicating that injury is attributable mostly to 2,4-D in the combination. There was a quadratic increase in crop injury and quadratic decrease in crop yield (with respect to most yield grades) with increased rate of 2,4-D applied alone or in combination with glyphosate applied at storage root development. However, neither the results of this relationship nor of the significance of herbicide rate were observed on crop injury or sweetpotato yield when herbicide application occurred at storage root formation, with a few exceptions. In general, crop injury and yield reduction were greatest at the highest rate (1/10×) of 2,4-D applied alone or in combination with glyphosate, although injury observed at lower rates was also a concern after initial observation by sweetpotato producers. However, in some cases, yield reduction of U.S. no.1 and marketable grades was also observed after application of 1/250×, 1/100×, or 1/10× rates of 2,4-D alone or with glyphosate when applied at storage root development.

A major concern of sweetpotato producers is the potential negative effects from herbicide drift or sprayer contamination events when dicamba is applied to nearby dicamba-resistant crops. A field study was initiated in 2014 and repeated in 2015 to assess the effects of reduced rates of N,N-Bis-(3-aminopropyl)methylamine (BAPMA) or diglycloamine (DGA) salt of dicamba, glyphosate, or a combination of these individually in separate trials with glyphosate on sweetpotato. Reduced rates of 1/10, 1/100, 1/250, 1/500, 1/750, and 1/1,000 of the 1× use rate of each dicamba formulation at 0.56 kg ha−1, glyphosate at 1.12 kg ha−1, and a combination of the two at aforementioned rates were applied to ‘Beauregard’ sweetpotato at storage root formation (10 d after transplanting) in one trial and storage root development (30 d after transplanting) in a separate trial. Injury with each salt of dicamba (BAPMA or DGA) applied alone or with glyphosate was generally equal to or greater than glyphosate applied alone at equivalent rates, indicating that injury is most attributable to the dicamba in the combination. There was a quadratic increase in crop injury and a quadratic decrease in crop yield (with respect to most yield grades) observed with an increased herbicide rate of dicamba applied alone or in combination with glyphosate applied at storage root development. However, with a few exceptions, neither this relationship nor the significance of herbicide rate was observed on crop injury or sweetpotato yield when herbicide application occurred at the storage root formation stage. In general, crop injury and yield reduction were greatest at the highest rate (1/10×) of either salt of dicamba applied alone or in combination with glyphosate, although injury observed at lower rates would be cause for concern after initial observation by sweetpotato producers. However, in some cases yield reduction of No.1 and marketable grades was observed following 1/250×, 1/100×, or 1/10× application rates of dicamba alone or with glyphosate when applied at storage root development.

Herbicide active ingredients, formulation type, ambient temperature, and humidity can influence volatility. A method was developed using volatility chambers to compare relative volatility of different synthetic auxin herbicide formulations in controlled environments. 2,4-D or dicamba acid vapors emanating after application were captured in air-sampling tubes at 24, 48, 72, and 96 h after herbicide application. The 2,4-D or dicamba was extracted from sample tubes and quantified using liquid chromatography and tandem mass spectrometry. Volatility from 2,4-D dimethylamine (DMA) was determined to be greater than that of 2,4-D choline in chambers where temperatures were held at 30 or 40 C and relative humidity (RH) was 20% or 50%. Air concentration of 2,4-D DMA was 0.399 µg m−3 at 40 C and 20% RH compared with 0.005 µg m−3 for 2,4-D choline at the same temperature and humidity at 24 h after application. Volatility from 2,4-D DMA and 2,4-D choline increased as temperature increased from 30 to 40 C. However, volatility from 2,4-D choline was lower than observed from 2,4-D DMA. Volatility from 2,4-D choline at 40 C increased from 0.00458 to 0.0263 µg m−3 and from 0.00341 to 0.025 µg m−3 when humidity increased from 20% to 50% at 72 and 96 h after treatment, respectively, whereas, volatility from 2,4-D DMA tended to be higher at 20% RH compared with 50% RH. Air concentration of dicamba diglycolamine was similar at all time points when measured at 40 C and 20% RH. By 96 h after treatment, there was a trend for lower air concentration of dicamba compared with earlier timings. This method using volatility chambers provided good repeatability with low variability across replications, experiments, and herbicides.

We study air entrainment by a solid plate plunging into a viscous liquid, theoretically and numerically. At dimensionless speeds $Ca=U\unicode[STIX]{x1D702}/\unicode[STIX]{x1D6FE}$ of order unity, a near-cusp forms due to the presence of a moving contact line. The radius of curvature of the cusp’s tip scales with the slip length multiplied by an exponential of $-Ca$. The pressure from the air flow drawn inside the cusp leads to a bifurcation, at which air is entrained, i.e. there is ‘wetting failure’. We develop an analytical theory of the threshold to air entrainment, which predicts the critical capillary number to depend logarithmically on the viscosity ratio, with corrections coming from the slip in the gas phase.

The deep subsurface of other planetary bodies is of special interest for robotic and human exploration. The subsurface provides access to planetary interior processes, thus yielding insights into planetary formation and evolution. On Mars, the subsurface might harbour the most habitable conditions. In the context of human exploration, the subsurface can provide refugia for habitation from extreme surface conditions. We describe the fifth Mine Analogue Research (MINAR 5) programme at 1 km depth in the Boulby Mine, UK in collaboration with Spaceward Bound NASA and the Kalam Centre, India, to test instruments and methods for the robotic and human exploration of deep environments on the Moon and Mars. The geological context in Permian evaporites provides an analogue to evaporitic materials on other planetary bodies such as Mars. A wide range of sample acquisition instruments (NASA drills, Small Planetary Impulse Tool (SPLIT) robotic hammer, universal sampling bags), analytical instruments (Raman spectroscopy, Close-Up Imager, Minion DNA sequencing technology, methane stable isotope analysis, biomolecule and metabolic life detection instruments) and environmental monitoring equipment (passive air particle sampler, particle detectors and environmental monitoring equipment) was deployed in an integrated campaign. Investigations included studying the geochemical signatures of chloride and sulphate evaporitic minerals, testing methods for life detection and planetary protection around human-tended operations, and investigations on the radiation environment of the deep subsurface. The MINAR analogue activity occurs in an active mine, showing how the development of space exploration technology can be used to contribute to addressing immediate Earth-based challenges. During the campaign, in collaboration with European Space Agency (ESA), MINAR was used for astronaut familiarization with future exploration tools and techniques. The campaign was used to develop primary and secondary school and primary to secondary transition curriculum materials on-site during the campaign which was focused on a classroom extra vehicular activity simulation.

Accurate modeling of ice sheets requires proper information on boundary conditions, including the geothermal heat flow (or heat-flow density (HFD)). Traditionally, one uniform HFD value is adopted for the entire modeled domain. We have calculated a distributed, high-resolution HFD dataset for an approximate core area (Sweden and Finland) of the Scandinavian ice sheet, and imbedded this within lower-resolution data published for surrounding regions. Within the Last Glacial Maximum ice margin, HFD varies with a factor of as much as 2.8 (HFD values ranging between 30 and 83 mWm–2), with an average of 49 mWm–2. This average value is 17% higher than 42 mWm–2, a common uniform value used in ice-sheet modeling studies of Fennoscandia. Using this new distributed dataset on HFD, instead of a traditional uniform value of 42 mWm–2, yields a 1.4 times larger total basal meltwater production for the last glacial cycle. Furthermore, using the new dataset in high-resolution modeling results in increased spatial thermal gradients at the bed. This enhances and introduces new local and regional effects on basal ice temperatures and melt rates. We observed significant strengthening of local ‘ice streaming’, which in one case correlates to an ice-flow event previously interpreted from geomorphology. Regional to local variations in geothermal heat flow need to be considered for proper identification and treatment of thermal and hydraulic bed conditions, most likely also when studying Laurentide, Greenland and Antarctic ice sheets.