Recent changes to US research funding are having far-reaching consequences that imperil the integrity of science and the provision of care to vulnerable populations. Resisting these changes, the BJPsych Portfolio reaffirms its commitment to publishing mental science and advancing psychiatric knowledge that improves the mental health of one and all.

Mungbean (Vigna radiata (L.) Wilczek), also known as greengram, is the most widely cultivated Asian Vigna species. Improved mungbean cultivars have a narrow genetic base that limits yield potential and they are poorly adapted to varying growth conditions in different agro-ecological conditions. The genetic potential of landrace germplasm accessions in gene- banks therefore needs to be better exploited. Germplasm core collections are made of a reduced set of representative accessions from the entire diversity maintained by genebanks. This subset of accessions can be used for testing general combining ability with local germplasm in the search for yield enhancement. Core collections also help breeders in selecting parental material that could maximize potential genetic gain from derived hybrid populations. At the National Bureau of Plant Genetic Resources (NBPGR), India, genetic enhancement/pre- breeding studies in mungbean have been initiated involving diverse parents mainly from the cultivated gene pool, using the Bureau's core collection as starting material. Germplasm enhancement aims at widening the genetic base of breeding materials by transferring desired genes from unimproved germplasm into enhanced varieties. Mild and decentralized selected material was maintained in target sites across the country. A total of 102 progenies were advanced to F5 for further selection and use by the breeders in Delhi. The genetic potential of a few selected enhanced progenies with desired plant types and better yield-related traits is presented in this paper. The study clearly demonstrates the potential of germplasm accessions conserved in genebanks for use in large-scale base-broadening efforts in mungbean.

We describe a study of the E–W-trending South Wagad Fault (SWF) complex at the eastern part of the Kachchh Rift Basin (KRB) in Western India. This basin was filled during Late Cretaceous time, and is presently undergoing tectonic inversion. During the late stage of the inversion cycle, all the principal rift faults were reactivated as transpressional strike-slip faults. The SWF complex shows wrench geometry of an anastomosing en échelon fault, where contractional and extensional segments and offsets alternate along the Principal Deformation Zone (PDZ). Geometric analysis of different segments of the SWF shows that several conjugate faults, which are a combination of R synthetic and R’ antithetic, propagate at a short distance along the PDZ and interact, generating significant fault slip partitioning. Surface morphology of the fault zone revealed three deformation zones: a 500 m to 1 km wide single fault zone; a 5–6 km wide double fault zone; and a c. 500 m wide diffuse fault zone. The single fault zone is represented by a higher stress accumulation which is located close to the epicentre of the 2001 Bhuj earthquake of M w 7.7. The double fault zone represents moderate stress at releasing bends bounded by two fault branches. The diffuse fault zone represents a low-stress zone where several fault branches join together. Our findings are well corroborated with the available geological and seismological data.

This paper presents a systematic formulation for the simulation of rigid body dynamics, including the short period dynamics, inherent to stage separation and jettisoning parts of a satellite launcher. This also gives a review of various types of separations involved in a launch vehicle. The problem is sufficiently large and complex; the methodology involves iterations at successively lower levels of abstraction. The best choice to tackle such problems is to use state-of-the-art programming technique known as object oriented programming. The necessary classes have been identified to represent various entities in the launch vehicle separation process (e.g., gravity, aerodynamics, propulsion and separation mechanisms etc.). Simple linkages are modelled with suitable objects. This approach helps the designer to simulate a launch vehicle separation dynamics and also to analyse separation system performance. To examine the influence of the design variables on the separating bodies, statistical analyses have been performed on the upper stage separation process and pull out of ongoing stage nozzle from the spent stage of a multistage rocket carrier using retro rockets.

Rabies is a major public health problem in Bangladesh, where most of the population live in rural areas. However, there is little epidemiological information on rabies in rural Bangladesh. This study was conducted in 30 upazilas (subdistricts) covering all six divisions of the country, to determine the levels of rabies and animal bites in Bangladesh. The total population of these upazilas was 6 992 302. A pretested questionnaire was used and data were collected by interviewing the adult members of families. We estimated that in Bangladesh, 166 590 [95% confidence interval (CI) 163 350–170 550] people per year are bitten by an animal. The annual incidence of rabies deaths in Bangladesh was estimated to be 1·40 (95% CI 1·05–1·78)/100 000 population. By extrapolating this, we estimated that 2100 (95% CI 1575–2670) people die annually from rabies in Bangladesh. More than three-quarters of rabies patients died at home. This community-based study provides new information on rabies epidemiology in Bangladesh.

Unprecedented high rates of anthrax outbreaks have been observed recently in cattle and humans in Bangladesh, with 607 human cases in 2010. By enrolling 15 case and 15 control cattle smallholdings in the spatial zone in July–September 2010, we conducted a case-control study, data of which were analysed by matched-pair analysis and multivariable conditional logistic regression. Feeding animals with uprooted and unwashed grass [odds ratio (OR) 41·2, 95% confidence interval (CI) 3·7–458·8, P=0·003], and feeding water hyacinth (Eichhornia crassipes) (OR 22·2, 95% CI 1·2–418·7, P=0·039) were independent risk factors for anthrax in cattle.

Bangladesh faced two epidemic waves of highly pathogenic avian influenza (HPAI) H5N1 in two consecutive years. The peaks of the waves were observed in February–July 2007 and January–April 2008, respectively. We examined the spatial and temporal patterns of the 293 outbreaks in 143 subdistricts in 2007 and 2008. Global clustering assessed by K-function was seen at distances 150–300 km between subdistricts. Significant local clusters were detected by space–time scan statistics. In both waves, significant primary clusters of HPAI outbreaks were identified in the central part of the country dominated by commercial production systems and in the northwestern part primarily in backyard production systems. Secondary clusters varied from the northwestern part in 2007 and the southern part in 2008. The findings are highly relevant for the successful planning and implementation of control, prevention and surveillance strategies by highlighting areas where detailed investigations should be initiated.

Maize was grown al the Regional Agricultural Research Station, Hathazari, Bangladesh during 1988/89 and 1989/90 to study fodder yield, cob growth and grain yield together with the contribution of pre-silking stem reserves to grain. Population densities were 33300, 44400 and 66600 plants/ha. Plants were either detopped after silking and pollen shedding, keeping 0, 2 or 3 leaves above the cob, or were left entire.

The results showed that the maize crop could successfully be detopped for fodder with little or no adverse effect on grain yield. Fodder yield increased with increased plant density and among the detopping treatments the highest fodder yield was obtained when the plants were detopped just above the cob. Cob growth followed a sigmoid pattern and the highest dry weight per cob was obtained from the lowest plant density and from entire plants. The number of cobs/m2 increased with increased plant density but detopping treatments did not give any significant difference in relation to densities. The number of grains/cob was highest with 33300 plants/ha but, among the detopping treatments, plants detopped just above the cob had the lowest number of grains/cob in both years. Weight of 1000-grain decreased with increasing plant density but it was increased by detopping plants just above the cob during 1988/89, although it was decreased in 1989/90. The highest apparent translocation of pre-silking reserves was obtained using densities of 44400 plants/ha but detopping treatments did not show any consistent effect, although the highest apparent translocation (20%) and harvest index (58%) were obtained from plants detopped just above the cob.

Background: Depression in the elderly is a common and disabling condition. The aim of the study was to evaluate the sensitivity and specificity of a two-question screen to identify depression and common mental disorders in the elderly.

Method: Residents of a ward in the town of Vellore were identified by a door-to-door survey from which 204 subjects aged over 60 years were selected for the study by systematic random sampling. They were screened using the two-question screen. The Revised Clinical Interview Schedule (CIS-R) was employed to confirm the diagnosis.

Results: The prevalence of depression and common mental disorder, using the CIS-R standard, was found to be 31.5%. The two-question screen has a sensitivity of 93.8% and specificity of 48.2%.

Conclusions: The high sensitivity of the two-question screen makes it a useful screening method which can be employed by health workers in the field.

Supercritical fluids (SF) have been used in a wide variety of applications:in industrial processes, analytical, waste detoxification, etc. Recently,its usefulness extends to the semiconductor industry. Researches have shownthat supercritical CO2 (SCCO2) can be used to removephotoresists and significantly reduce the amount of waste from solvents incomparison to conventional stripping techniques. SF will also find itsusefulness in cleaning high aspect ratio vias and deep trenches assemiconductor features shrink to submicron levels. We will report here theuse of supercritical CO2 treatments in extraction of porogensfrom a nanohybrid film fabricated via templated-porogen approach. Its use asa medium to repair the damage in porous films from plasma ashing will alsobe presented. The ability to tune the solvation and diffusion power of SCCO2 and to swell the film matrix make it a good medium forsilylation to restore hydrophobicity and functionalize the film.

Food habits of tigers Panthera tigris and population attributes of prey species (population structure, density and biomass) were studied in the tropical dry deciduous forest of Pench National Park, Central India, from November 1998 to April 1999. Scat analysis and line transect method were used to estimate tiger food habits and density of major prey species, respectively. The 61.1 km2 intensive study area was found to have very high ungulate density (90.3 animals km−2) with chital Axis axis being the most common species (80.7 animals km−2), followed by sambar Cervus unicolor (6.1 animals km−2). Common langur Presbytis entellus was the most abundant (77.2 animals km−2) primate species. When the density figures were multiplied by the average weight of each prey species, a high biomass density of 6013.25 kg km−2 was obtained for the intensive study area. Chital (47.3%) along with sambar (14.5%) and wild pig Sus scrofa (10.9%) constituted the major part of the tiger's diet. If there is food choice, tigers seem to kill medium- and large-sized species more often. Wild pig and sambar were consumed more than their availability, whereas chital were taken in proportion to their availability. Gaur Bos gaurus and nilgai Bosephalus tragocamelus were not represented in the tiger's diet. Common langur was consumed in lesser proportion by tigers than expected by estimates of its density. The average weight of animals consumed by tigers in the intensive study area was 82.1 kg. The analyses revealed that Pench harbours very high prey density and tigers are mostly dependent on the wild ungulates rather than on domestic livestock as is the case in many other areas in the Indian subcontinent. These two factors thus make Pench National Park a potential area for long-term conservation of tigers.

Large (11-mm diameter) single-crystal AlN boules have been prepared using sublimationrecondensation growth. X-ray topography shows that substrates prepared from those boules have a dislocation density of less than 500 cm-2, while the central region of these substrates was nearly dislocation-free. Rocking curves of less than 10 arcsecs have been obtained indicating the high quality of these crystals. The AlN substrates have been used to growth an AlGaN/AlN multiquantum well structure with excellent crystalline quality and with photoluminescence peaked at around 260nm. In addition, a UV LED with emission wavelength at 360nm has been fabricated. This is the first operating opto-electronic device demonstrated on an AlN substrate.

Composite coatings containing quasicrystalline (QC) phases in Al-Cu-Fe alloys were prepared by laser cladding using a mixture of the elemental powders. Two substrates, namely pure aluminum and an Al-Si alloy were used. The clad layers were remelted at different scanning velocities to alter the growth conditions of different phases. The process parameters were optimized to produce quasicrystalline phases. The evolution of the microstructure in the coating layer was characterized by detailed microstructural investigation. The results indicate presence of quasicrystals in the aluminum substrate. However, only approximant phase could be observed in the substrate of Al-Si alloys. It is shown that there is a significant transport of Si atoms from the substrate to the clad layer during the cladding and remelting process. The hardness profiles of coatings on aluminum substrate indicate a very high hardness. The coating on Al-Si alloy, on the other hand, is ductile and soft. The fracture toughness of the hard coating on aluminum was obtained by nano-indentation technique. The K1C value was found to be 1.33 MPa m1/2 which is typical of brittle materials.

Variation of hardness with penetration in nanoindentation of a rough surface is a compound effect of variation in asperity geometry with penetration, designated geometric effect, and genuine property gradients with depth as may exist in a near-surface zone. We simulate indentation of a rough surface numerically to elucidate the geometric effects and validate it by some model “macro” experiments. Finally, we formulate a general framework to deconvolute genuine property variation by normalizing the measured hardness with the geometric effect.

The roughness of metallic surfaces generated by machining depends on the intended intervention by the tool and the inadvertent consequences determined by the response of metals. The roughness generated in four different metals by grinding is studied using the power spectrum method. It was found that the level of power is determined by the intended intervention such as the depth of cut and, to some extent, by hardness because of its possible influence on micropileup geometry. The power gradient is, however, influenced by inadvertent damage which may be related to material properties such as thermal conductivity and adhesion.