This paper introduces a novel ray-tracing methodology for various gradient-index materials, particularly plasmas. The proposed approach utilizes adaptive-step Runge–Kutta integration to compute ray trajectories while incorporating an innovative rasterization step for ray energy deposition. By removing the requirement for rays to terminate at cell interfaces – a limitation inherent in earlier cell-confined approaches – the numerical formulation of ray motion becomes independent of specific domain geometries. This facilitates a unified and concise tracing method compatible with all commonly used curvilinear coordinate systems in laser–plasma simulations, which were previously unsupported or prohibitively complex under cell-confined frameworks. Numerical experiments demonstrate the algorithm’s stability and versatility in capturing diverse ray physics across reduced-dimensional planar, cylindrical and spherical coordinate systems. We anticipate that the rasterization-based approach will pave the way for the development of a generalized ray-tracing toolkit applicable to a broad range of fluid simulations and synthetic optical diagnostics.

Machine learning has already shown promising potential in tiled-aperture coherent beam combining (CBC) to achieve versatile advanced applications. By sampling the spatially separated laser array before the combiner and detuning the optical path delays, deep learning techniques are incorporated into filled-aperture CBC to achieve single-step phase control. The neural network is trained with far-field diffractive patterns at the defocus plane to establish one-to-one phase-intensity mapping, and the phase prediction accuracy is significantly enhanced thanks to the strategies of sin-cos loss function and two-layer output of the phase vector that are adopted to resolve the phase discontinuity issue. The results indicate that the trained network can predict phases with improved accuracy, and phase-locking of nine-channel filled-aperture CBC has been numerically demonstrated in a single step with a residual phase of λ/70. To the best of our knowledge, this is the first time that machine learning has been made feasible in filled-aperture CBC laser systems.

The self-generated magnetic field in three-dimensional (3-D) single-mode ablative Rayleigh–Taylor instability (ARTI) relevant to the acceleration phase of a direct-drive inertial confinement fusion (ICF) implosion is investigated. It is found that stronger magnetic fields up to a few thousand teslas can be generated by 3-D ARTI rather than by its two-dimensional (2-D) counterpart. The Nernst effects significantly alter the magnetic field convection and amplify the magnetic fields. The magnetic field of thousands of teslas yields the Hall parameter of the order of unity, leading to profound magnetized heat flux modification. While the magnetic field significantly accelerates the bubble growth in the short-wavelength 2-D modes through modifying the heat fluxes, the magnetic field mostly accelerates the spike growth but has little influence on the bubble growth in 3-D ARTI. The accelerated growth of spikes in 3-D ARTI is expected to enhance material mixing and degrade ICF implosion performance. This work is focused on a regime relevant to direct-drive ICF parameters at the National Ignition Facility, and it also covers a range of key parameters that are relevant to other ICF designs and hydrodynamic/astrophysical scenarios.

This study investigates the flow structures and combustion regimes in an axisymmetric cavity-based scramjet combustor with a total temperature of 1800 K and a high Reynolds number of approximately 1 × 107. The hydroxyl planar laser-induced fluorescence technique, along with the broadband flame emission and CH* chemiluminescence, is employed to visualize the instantaneous flame structure in the optically accessible cavity. The jet-wake flame stabilization mode is observed, with intense heat release occurring in the jet wake upstream of the cavity. A hybrid Reynolds-averaged Navier–Stokes/large-eddy simulation approach is performed for the 0.18-equivalent-ratio case with a pressure-corrected flamelet/progress variable model. The combustion regime is identified mainly in the corrugated or wrinkled flamelet regime (approximately 102 < Da < 104, 103 < Ret < 105 where $Da$ is the Damköhler number and $Re_t$ is the turbulent Reynolds number). The combustion process is jointly dominated by supersonic combustion (which accounts for approximately 58 %) and subsonic combustion, although subsonic combustion has a higher heat release rate (peak value exceeding 1 × 109 J (m3s)−1). A partially premixed flame is observed, where the diffusion flame packages a considerable quantity of twisted premixed flame. The shockwave plays a critical role in generating vorticity by strengthening the volumetric expansion and baroclinic torque term, and it can facilitate the chemical reaction rates through the pressure and temperature surges, thereby enhancing the combustion. Combustion also shows a remarkable effect on the overall flow structures, and it drives alterations in the vorticity of the flow field. In turn, the turbulent flow facilitates the combustion and improves the flame stabilization by enhancing the reactant mixing and increasing the flame surface area.

Timing of food intake is an emerging aspect of nutrition; however, there is a lack of research accurately assessing food timing in the context of the circadian system. The study aimed to investigate the relation between food timing relative to clock time and endogenous circadian timing with adiposity and further explore sex differences in these associations among 151 young adults aged 18–25 years. Participants wore wrist actigraphy and documented sleep and food schedules in real time for 7 consecutive days. Circadian timing was determined by dim-light melatonin onset (DLMO). The duration between last eating occasion and DLMO (last EO-DLMO) was used to calculate the circadian timing of food intake. Adiposity was assessed using bioelectrical impedance analysis. Of the 151 participants, 133 were included in the statistical analysis finally. The results demonstrated that associations of adiposity with food timing relative to circadian timing rather than clock time among young adults living in real-world settings. Sex-stratified analyses revealed that associations between last EO-DLMO and adiposity were significant in females but not males. For females, each hour increase in last EO-DLMO was associated with higher BMI by 0·51 kg/m2 (P = 0·01), higher percent body fat by 1·05 % (P = 0·007), higher fat mass by 0·99 kg (P = 0·01) and higher visceral fat area by 4·75 cm2 (P = 0·02), whereas non-significant associations were present among males. The findings highlight the importance of considering the timing of food intake relative to endogenous circadian timing instead of only as clock time.

Studies have shown that genetic factors play an important role in CHD’s development. The mutations in GATA4 and CITED2 genes result in the failure of the heart to develop normally, thereby leading to septal defects. The present study investigated the underlying molecular aetiology of patients with cardiac septation defects from Xinjiang. We investigated variants of the GATA4 and CITED2 gene coding regions in 172 patients with cardiac septation defects by sequencing. Healthy controls (n = 200) were included. Three heterozygous variations (p.V380M, p.P394T, and p.P407Q) of the GATA4 gene were identified in three patients. p.V380M was discovered in a patient with atrial septal defect. p.P394T was noted in a patient with atrial septal defect. p.V380M and p.P407Q of the GATA4 gene were detected in one patient with ventricular septal defect. A novel homozygous variation (p. Sl92G) of the CITED2 gene was found in one patient with ventricular septal defect. Other patients and healthy individuals were normal. The limited prevalence of genetic variations observed in individuals with cardiac septal defects from Xinjiang provides evidence in favour of the hypothesis that CHD is a polygenic hereditary disorder. It is plausible that mutations in the GATA4 and CITED2 genes could potentially underlie the occurrence of idiopathic CHD in affected patients.

Energy loss of protons with 90 and 100 keV energies penetrating through a hydrogen plasma target has been measured, where the electron density of the plasma is about 1016 cm−3 and the electron temperature is about 1-2 eV. It is found that the energy loss of protons in the plasma is obviously larger than that in cold gas and the experimental results based on the Bethe model calculations can be demonstrated by the variation of effective charge of protons in the hydrogen plasma. The effective charge remains 1 for 100 keV protons, while the value for 90 keV protons decreases to be about 0.92. Moreover, two empirical formulae are employed to extract the effective charge.

Magnetic fields are important physics in stellar evolutionary theory, which seriously affects the stellar structure and evolutionary statues. The small-scale magnetic fields in the photosphere are ubiquitous, and float on the stellar surface, which usually couple with the acoustic waves, affecting the propagation of the acoustic waves. Considering the effect of the magnetic fields in the stellar photosphere on the oscillation frequencies, we calculate the asteroseismology for solar-like star KIC 11295426 and KIC 10963065. We obtain the stellar fundamental parameters, especially the strength of small-scale magnetic fields in the stellar photosphere. We find that the small-scale magnetic fields in the stellar photosphere may obviously improve the agreement between the observations and the theoretical models for two stars. The magnetic strength for KIC 11295426 and KIC 10963065 from asteroseismology are in agreement with the stellar period-activity relation.

All-fiber coherent beam combiners based on the self-imaging effect can achieve a near-perfect single laser beam, which can provide a promising way to overcome the power limitation of a single-fiber laser. One of the key points is combining efficiency, which is determined by various mismatches during fabrication. A theoretical model has been built, and the mismatch error is analyzed numerically for the first time. The mismatch errors have been numerically studied with the beam quality and combining efficiency being chosen as the evaluation criteria. The tolerance of each mismatch error for causing 1% loss is calculated to guide the design of the beam combiners. The simulation results are consistent with the experimental results, which show that the mismatch error of the square-core fiber is the main cause of the efficiency loss. The results can provide useful guidance for the fabrication of all-fiber coherent beam combiners.

Environment-induced epigenetics are involved in diapause regulation, but the molecular mechanism that epigenetically couples nutrient metabolism to diapause regulation remains unclear. In this study, we paid special attention to the significant differences in the level of N6-adenosine methylation (m6A) of dihydroxyacetone phosphate acyltransferase (DHAPAT) and phosphatidate phosphatase (PAP) genes in the lipid metabolism pathway of the bivoltine silkworm (Bombyx mori) strain Qiufeng developed from eggs incubated at a normal temperature (QFHT, diapause egg producer) compared to those from eggs incubated at a low temperature (QFLT, non-diapause egg producer). We knocked down DHAPAT in the pupal stage of the QFLT group, resulting in the non-diapause destined eggs becoming diapausing eggs. In the PAP knockdown group, the colour of the non-diapause destined eggs changed from light yellow to pink 3 days after oviposition, but they hatched as normal. Moreover, we validated that YTHDF3 binds to m6A-modified DHAPAT and PAP mRNAs to promote their stability and translation. These results suggest that RNA m6A methylation participates in the diapause regulation of silkworm by changing the expression levels of DHAPAT and PAP and reveal that m6A epigenetic modification can be combined with a lipid metabolism signal pathway to participate in the regulation of insect diapause traits, which provides a clearer image for exploring the physiological basis of insect diapause.

Pulse shaping is a powerful tool for mitigating implosion instabilities in direct-drive inertial confinement fusion (ICF). However, the high-dimensional and nonlinear nature of implosions makes the pulse optimization quite challenging. In this research, we develop a machine-learning pulse shape designer to achieve high compression density and stable implosion. The facility-specific laser imprint pattern is considered in the optimization, which makes the pulse design more relevant. The designer is applied to the novel double-cone ignition scheme, and simulation shows that the optimized pulse increases the areal density expectation by 16% in one dimension, and the clean-fuel thickness by a factor of four in two dimensions. This pulse shape designer could be a useful tool for direct-drive ICF instability control.

Many protected areas worldwide have been established to protect the last natural refuges of flagship animal species. However, long-established protected areas do not always match the current distributions of target species under changing environmental conditions. Here we present a case study of the Asian elephant Elephas maximus in Xishuangbanna, south-west China, to evaluate whether the established protected areas match the species’ current distribution and to identify key habitat patches for Asian elephant conservation. Our results show that currently only 24.5% of the predicted Asian elephant distribution in Xishuangbanna is located within Xishuangbanna National Nature Reserve, which was established for elephant conservation. Based on the predicted Asian elephant distribution, we identified the most important habitat patches for elephant conservation in Xishuangbanna. The three most important patches were outside Xishuangbanna National Nature Reserve and together they contained 43.3% of the estimated food resources for Asian elephants in all patches in Xishuangbanna. Thus, we identified a spatial mismatch between immobile protected areas and mobile animals. We recommend the inclusion of the three identified key habitat patches in a new national park currently being planned by the Chinese authorities for the conservation of the Asian elephant.

A method is presented for configuration selection to obtain the best tip-over stability of a modular reconfigurable mobile manipulator (MRMM) under various application situations. The said MRMM consists of a modular reconfigurable robot (MRR) mounted on a mobile platform. The MRR in different configurations creates different wrenches onto the mobile platform, leading to different tip-over moments of the MRMM, even though the joint speeds or tip speeds remain the same. The underlying problem pertains to selecting one configuration of MRR for reconfiguration that would obtain the best tip-over stability under a given application. First, all the permissible configurations are identified through an enumeration method. Then, the feasible configurations are determined based on application-oriented workspace classifications. At last, two workspace indices, vertical reach and horizontal reach, are used to select an optimal configuration. The tip-over stability analysis and evaluation of MRMM are carried out for verification for three cases including vertical, horizontal, and general 3D space applications. The results demonstrate the effectiveness of the proposed method.