American silk moth, Antheraea polyphemus Cramer 1775 (Lepidoptera: Saturniidae), native to North America, has potential significance in sericulture for food consumption and silk production. To date, the phylogenetic relationship and divergence time of A. polyphemus with its Asian relatives remain unknown. To end these issues, two mitochondrial genomes (mitogenomes) of A. polyphemus from the USA and Canada respectively were determined. The mitogenomes of A. polyphemus from the USA and Canada were 15,346 and 15,345 bp in size, respectively, with only two transitions and five indels. The two mitogenomes both encoded typical mitochondrial 37 genes. No tandem repeat elements were identified in the A+T-rich region of A. polyphemus. The mitogenome-based phylogenetic analyses supported the placement of A. polyphemus within the genus Antheraea, and revealed the presence of two clades for eight Antheraea species used: one included A. polyphemus, A. assamensis Helfer, A. formosana Sonan and the other contained A. mylitta Drury, A. frithi Bouvier, A. yamamai Guérin-Méneville, A. proylei Jolly, and A. pernyi Guérin-Méneville. Mitogenome-based divergence time estimation further suggested that the dispersal of A. polyphemus from Asia into North America might have occurred during the Miocene Epoch (18.18 million years ago) across the Berling land bridge. This study reports the mitogenome of A. polyphemus that provides new insights into the phylogenetic relationship among Antheraea species and the origin of A. polyphemus.

Nonlinear optical gain modulation (NOGM) is an effective approach for generating highly coherent femtosecond Raman pulses. In a typical NOGM system, the pump pulse energy boosting unit and nonlinear frequency conversion unit are separated, which poses a difficulty in generating Raman solitons with pulse energy over the μJ level. Here, we demonstrate an integrated ultrafast ytterbium-Raman fiber amplifier, which accomplishes pump pulse amplification and Raman pulse conversion simultaneously in ytterbium-doped fiber (YDF). The integrated ytterbium-Raman fiber amplifier could generate approximately 1 μJ 1121 nm Raman pulses with a pulse duration of 589 fs under a conversion efficiency of 69.9%. The result represents the highest pulse energy experimentally recorded in NOGM systems. Simulation further reveals that YDF gain could promote Raman conversion efficiency and reduce nonlinear chirp accumulation, which leads to improved performance of generated Raman pulses. Meanwhile, the feasibility of generating 10 μJ level Raman pulses using such a hybrid gain setup was also confirmed numerically.

The recently discovered social place cells and grid cells in hippocampal formation are believed to be the neural basis underlying relative navigation of conspecifics. In this paper, we propose a new brain-inspired relative navigation model in a large-scale 3D environment for collective UAVs that translates the neurodynamics of the social place cell–grid cell circuit to robotic relative navigation algorithm for the first time. Our approach comprises three key parts: (1) a 3D isotropic Gaussian function-based cube social place cell network (cube-SPCNet), (2) a 3D continuous attractor neural network-based cube grid cell network (cube-GCNet), and (3) a population vector-based neural decoding module. The resulting brain-inspired relative navigation model incorporates the good relative information abstraction capabilities of the cube-SPCNet with the powerful temporal filtering capabilities of the cube-GCNet, yielding robustness and accuracy performance improvement for relative navigation. Experimental results show the new method can provide more robust and precise relative navigation results than its conventional counterpart, displaying a possible brain-inspired solution for relative navigation enhancement for collective UAVs.

Rheumatoid arthritis (RA) is a prevalent autoimmune disease, and there is growing evidence suggesting a potential correlation between dietary factors and the pathogenesis of this condition. In order to investigate the causal relationship between diet and RA, we conducted a two-sample Mendelian randomisation (MR) analysis to examine the causal associations between twenty-two dietary factors and RA. Summary data from genome-wide association studies (GWAS) of RA were obtained from large GWAS meta-analyses. GWAS summary data for twenty-two dietary factors were obtained from UK Biobank. Random-effects inverse variance weighted was used as the primary method for assessing causality, and analyses of heterogeneity and horizontal pleiotropy were performed to ensure the accuracy of the results. Research indicates a negative genetic causal relationship between cereal intake (OR = 0·64, 95 % CI: 0·41, 0·99, P = 0·048) and oily fish intake (OR = 0·70, 95 % CI: 0·52, 0·95, P = 0·020) with the risk of RA. Other dietary factors were not causally related to RA. Sensitivity analysis shows that our results are reliable. This study provides genetic evidence suggesting that cereal intake and oily fish intake are protective factors for RA, indicating that RA patients and individuals at high risk should make appropriate dietary adjustments.

We consider linear-fractional branching processes (one-type and two-type) with immigration in varying environments. For $n\ge0$, let $Z_n$ count the number of individuals of the nth generation, which excludes the immigrant who enters the system at time n. We call n a regeneration time if $Z_n=0$. For both the one-type and two-type cases, we give criteria for the finiteness or infiniteness of the number of regeneration times. We then construct some concrete examples to exhibit the strange phenomena caused by the so-called varying environments. For example, it may happen that the process is extinct, but there are only finitely many regeneration times. We also study the asymptotics of the number of regeneration times of the model in the example.

The spatio-temporal scales, as well as a comprehensive self-sustained mechanism of the reattachment unsteadiness in shock wave/boundary layer interaction, are investigated in this study. Direct numerical simulations reveal that the reattachment unsteadiness of a Mach 7.7 laminar inflow causes over $26\,\%$ variation in wall friction and up to $20\,\%$ fluctuation in heat flux at the reattachment of the separation bubble. A statistical approach, based on the local reattachment upstream movement, is proposed to identify the spanwise and temporal scales of reattachment unsteadiness. It is found that two different types, i.e. self-induced and random processes, dominate different regions of reattachment. A self-sustained mechanism is proposed to comprehend the reattachment unsteadiness in the self-induced region. The intrinsic instability of the separation bubble transports vorticity downstream, resulting in an inhomogeneous reattachment line, which gives rise to baroclinic production of quasi-streamwise vortices. The pairing of these vortices initiates high-speed streaks and shifts the reattachment line upstream. Ultimately, viscosity dissipates the vortices, triggering instability and a new cycle of reattachment unsteadiness. The temporal scale and maximum vorticity are estimated with the self-sustained mechanism via order-of-magnitude analysis of the enstrophy. The advection speed of friction, derived from the assumption of coherent structures advecting with a Blasius-type boundary layer, aligns with the numerical findings.

Recent studies of viscous dissipation mechanisms in impacting droplets have revealed distinct behaviours between the macroscale and nanoscale. However, the transition of these mechanisms from the macroscale to the nanoscale remains unexplored due to limited research at the microscale. This work addresses the gap using the many-body dissipative particle dynamics (MDPD) method. While the MDPD method omits specific atomic details, it retains crucial mesoscopic effects, making it suitable for investigating the impact dynamics at the microscale. Through the analysis of velocity contours within impacting droplets, the research identifies three primary contributors to viscous dissipation during spreading: boundary-layer viscous dissipation from shear flow; rim geometric head loss; and bulk viscous dissipation caused by droplet deformation. This prompts a re-evaluation of viscous dissipation mechanisms at both the macroscale and nanoscale. It reveals that the same three kinds of dissipation are present across all scales, differing only in their relative intensities at each scale. A model of the maximum spreading factor (βmax) incorporating all forms of viscous dissipation without adjustable parameters is developed to substantiate this insight. This model is validated against three distinct datasets representing the macroscale, microscale and nanoscale, encompassing a broad spectrum of Weber numbers, Ohnesorge numbers and contact angles. The satisfactory agreement between the model predictions and the data signifies a breakthrough in establishing a universal βmax model applicable across all scales. This model demonstrates the consistent nature of viscous dissipation mechanisms across different scales and underscores the importance of integrating microscale behaviours to understand macroscale and nanoscale phenomena.

In the present paper, we study a new kind of anabelian phenomenon concerning the smooth pointed stable curves in positive characteristic. It shows that the topology of moduli spaces of curves can be understood from the viewpoint of anabelian geometry. We formulate some new anabelian-geometric conjectures concerning tame fundamental groups of curves over algebraically closed fields of characteristic $p>0$ from the point of view of moduli spaces. The conjectures are generalized versions of the Weak Isom-version of the Grothendieck conjecture for curves over algebraically closed fields of characteristic $p>0$ which was formulated by Tamagawa. Moreover, we prove that the conjectures hold for certain points lying in the moduli space of curves of genus $0$.

Binary nanodroplet collisions have received increasing attention, whilst the identification of collision outcomes and the viscous dissipation mechanism have remained poorly understood. Using molecular dynamics simulations, this study investigates binary nanodroplet collisions over wide ranges of Weber number (We), Ohnesorge number (Oh) and off-centre distances. Coalescence, stretching separation and shattering are identified; however, bouncing, reflexive separation and rotational separation reported for millimetre-sized collisions are not observed, which is attributed to the enhanced viscous effect caused by the ‘natural’ high-viscosity characteristics of nanodroplets. Intriguingly, as an intermediate outcome, holes form in retracting films at relatively high We, arising from the vibration and thermal fluctuation of the films. Due to the combined effects of inertial, capillary and viscous forces, binary nanodroplet collisions fall into the cross-over regime, so estimating viscous dissipation becomes extremely important for distinguishing outcome boundaries. Based on the criterion that stretching separation is triggered only when the residual off-centre kinetic energy exceeds the surface energy required for separation, the boundary equation between coalescence and stretching separation is established. Here, viscous dissipation is calculated by the extracted flow feature from simulations, showing that the ratio of viscous dissipation to the initial kinetic energy depends only on Oh, not on We. Because of complex viscous dissipation mechanisms, the same boundary equation in the cross-over regime has also not been satisfactorily revealed for macroscale collisions. Therefore, the proposed equation is tested for wide data sources from both macroscale and nanoscale collisions, and satisfying agreement is achieved, demonstrating the universality of the equation.

Here, we report the generation of MeV alpha-particles from H-11B fusion initiated by laser-accelerated boron ions. Boron ions with maximum energy of 6 MeV and fluence of 109/MeV/sr@5 MeV were generated from 60 nm-thick self-supporting boron nanofoils irradiated by 1 J femtosecond pulses at an intensity of 1019 W/cm2. By bombarding secondary hydrogenous targets with the boron ions, 3 × 105/sr alpha-particles from H-11B fusion were registered, which is consistent with the theoretical yield calculated from the measured boron energy spectra. Our results demonstrated an alternative way toward ultrashort MeV alpha-particle sources employing compact femtosecond lasers. The ion acceleration and product measurement scheme are referential for the studies on the ion stopping power and cross section of the H-11B reaction in solid or plasma.

The efficient separation of hexane isomers from the light naphtha fraction is a significant challenge in the petrochemical industry. 5A zeolite adsorbent is used commercially to sieve alkane isomers. In this study, 5A zeolites were synthesized using a low-cost natural clay mineral precursor, i.e. palygorskite (PAL), with the addition of crystallization directing agent (CDA). By varying the mass ratio of CDA/deionized water, 5A zeolites were obtained as CDA-5%, CDA-7.5%, and CDA-10%. All products were submicron particles with an average particle size of 400–800 nm. A sieving test of CDA-induced 5A zeolites was carried out on hexane adsorbates including n-hexane (nHEX), 2-methylpentane (2MP), and 3-methylpentane (3MP). According to vapor-phase batch adsorption experiments, a significant equilibrium amount (0.149 g/g) of nHEX and only 0.0321 g/g 2MP and 0.0416 g/g 3MP were adsorbed on the 5A zeolite product with CDA-5%. The dynamic adsorption performance of 5A zeolite (CDA-5%) was evaluated by breakthrough curves of binary mixtures of nHEX/2MP and nHEX/3MP. Palygorskite 5A (PAL 5A) zeolite achieved maximum dynamic adsorption capacities of nHEX (0.16 g/g in both cases) at 200°C and 1.2 MPa total pressure. This work provided an economic alternative for the synthesis of 5A zeolites using natural clay minerals instead of chemical raw materials.

The COVID-19 pandemic led to an initial increase in the incidence of carbapenem-resistant Enterobacterales (CRE) from clinical cultures in South-East Asia hospitals, which was unsustained as the pandemic progressed. Conversely, there was a decrease in CRE incidence from surveillance cultures and overall combined incidence. Further studies are needed for future pandemic preparedness.

In this study, the mitochondrial genome of Eulaelaps silvestris, which parasitizes Apodemus chevrieri, was sequenced and assembled to fill the gap in understanding the molecular evolution of the genus Eulaelaps. The E. silvestris mitochondrial genome is a double-stranded DNA molecule with a length of 14 882 bp, with a distinct AT preference for base composition and a notably higher AT content than GC content. The arrangement between genes is relatively compact, with a total of 10 gene intergenic regions and 12 gene overlap regions. All protein-coding genes had a typical ATN initiation codon, and only 2 protein-coding genes had an incomplete termination codon T. Out of the 13 protein-coding genes, the 5 most frequently used codons ended in A/U, with only 1 codon ending in G/C had an relative synonymous codon usage value >1. Except for trnS1 and trnS2, which lacked the D arm, all other tRNAs were able to form a typical cloverleaf structure; and there were a total of 38 mismatches in the folding process of tRNA genes. Unlike the gene arrangement order of the arthropod hypothetical ancestor, the E. silvestris mitochondrial genome underwent fewer rearrangements, mainly near tRNA genes and control regions. Both the maximum likelihood tree and the Bayesian tree showed that the family Haemogamasidae is most closely related to the family Dermanyssidae. The results not only provide a theoretical basis for studying the phylogenetic relationships of the genus Eulaelaps, but also provide molecular evidence that the family Haemogamasidae does not belong to the subfamily Laelapidae.

Objectives: Over the past 2 years, many infection prevention and control (IPC) resources have been diverted to manage the COVID-19 pandemic. Its impact on the incidence of antimicrobial-resistant organisms has not been adequately studied. We investigated the impact of the pandemic on the incidence of carbapenem-resistant Enterobacterales (CRE) in Singapore. Methods: We extracted data on unique CRE isolates (clinical and/or surveillance cultures) and patient days for 6 public hospitals in Singapore from the carbapenemase-producing Enterobacteriaceae (CaPES) study group database, and we calculated the monthly incidence of CRE (per 10,000 patient days). Interrupted time-series (ITS) analysis was conducted with the pre–COVID-19 period defined as before February 2020, and the COVID-19 period defined as after February 2020. Statistical analyses were performed using Stata version 15 software. Results: From January 2017 to March 2021, 6,770 CRE isolates and 9,126,704 patient days were documented. The trend in CRE monthly incidence increased significantly during the pre–COVID-19 period (0.060; 95% CI, 0.033–0.094; P < .001) but decreased during the COVID-19 period (−0.183; 95% CI, −0.390 to 0.023; P = .080) without stepwise change in the incidence (−1.496; 95% CI, −3.477 to 0.485; P = .135). The trend in monthly incidence rate of CRE clinical cultures increased significantly during the pre–COVID-19 period (0.046; 95% CI, 0.028–0.064; P < .001) and decreased significantly during COVID-19 period (−0.148; 95% CI, −0.249 to −0.048; P = .048) with no stepwise change in the incidence (−0.063; 95% CI, −0.803 to 0.677; P = .864). The trend in monthly incidence rate of CRE surveillance cultures decreased during the pre–COVID-19 period (−0.020; 95% CI, −0.062 to 0.022; P = .341) and the COVID-19 period (−0.067; 95% CI, −0.291to 0.158; P = .552) without stepwise change in the incidence (−1.327; 95% CI, −3.535 to 0.881; P = .233). Conclusions: The rate of CRE in clinical cultures decreased during COVID-19 but not the rate in surveillance cultures. Further studies are warranted to study the impact of COVID-19 on CREs.

(DUPLICATE DELETED)

The carbonate-hosted Pb–Zn deposits in the Sichuan–Yunnan–Guizhou (SYG) triangle region are important Indosinian deposits in South China. The Tianbaoshan deposit is a typical large Pb–Zn deposit in the SYG area and occurs as pipe-like type, hosted by Sinian dolostone. It contains ∼26 Mt Zn–Pb ore (7.76–10.09 % Zn, 1.28–1.50 % Pb and 93.6 g t−1 Ag) and >0.1 Mt Cu ore (2.55 % Cu). In this study, the detailed mineral textures, mineral chemical and sulphur isotopic compositions of the various sulphides have been analysed to constrain the abnormal enrichment mechanism and mineralization relationship. Four mineralization stages have been recognized: Stage 1, minor early pyrite (Py1) with relics and infill of intergranular dolomite or quartz grains; Stage 2, Cu mineralization with coarse-grained, elliptical crystal chalcopyrite (Cp1); (3) Stage 3, Zn mineralization with dark fine-grained sphalerite (Sph1) and light coarse-grained sphalerite (Sph2); and (4) Stage 4, as represented by a quartz–calcite assemblage with galena, minor pyrite (Py2) and chalcopyrite (Cp2). The petrography of the sulphide minerals (Py1, Cp1, Sph1 and Sph2) demonstrates a mutual inclusion relationship. The nature of this relationship from core to rim and their similar sulphur isotope values (5.5–8.3 ‰) indicates a single sulphur source, suggesting that the different mineralization types are the result of different stages of a continuous hydrothermal system. Sphalerite geothermometer study suggests that sphalerite in the Tianbaoshan deposit formed in a low-temperature (<200 °C) hydrothermal system. The low concentrations of Mn and In, low In/Ge ratios and high Fe/Cd ratios in the sphalerite are consistent with those of Mississippi Valley-type (MVT) deposits, but different from those of magmatism-related deposits (e.g. epithermal, skarn and VMS deposits). The positive δ34S values for Py1 (5.1–7.9 ‰), Cp1 (5.1–7.2 ‰), Sph1 (4.7–7.4 ‰), Sph2 (3.9–8.7 ‰), Py2 (4.4–9.3 ‰) and Cp2 (5.0–6.8 ‰) indicate a sulphur source from thermochemical reduction of coeval seawater sulphate. Widely developed dissolved textures (caverns and breccias) with massive sulphide infillings and deformed host rock remnants suggest that replacement of host dolostones by ore fluids was volumetrically significant and the ore formed nearly simultaneously with the cavities. The Tianbaoshan deposit is a typical MVT deposit, which resulted from mixing of a H2S-rich fluid and a metal-rich fluid, with thermochemical sulphate reduction occurring before ore precipitation rather than during ore precipitation.