An actively controllable cascaded proton acceleration driven by a separate 0.8 picosecond (ps) laser is demonstrated in proof-of-principle experiments. MeV protons, initially driven by a femtosecond laser, are further accelerated and focused into a dot structure by an electromagnetic pulse (EMP) on the solenoid, which can be tuned into a ring structure by increasing the ps laser energy. An electrodynamics model is carried out to explain the experimental results and show that the dot-structured proton beam is formed when the outer part of the incident proton beam is optimally focused by the EMP force on the solenoid; otherwise, it is overfocused into a ring structure by a larger EMP. Such a separately controlled mechanism allows precise tuning of the proton beam structures for various applications, such as edge-enhanced proton radiography, proton therapy and pre-injection in traditional accelerators.

Machine learning (ML) models have been developed to identify randomised controlled trials (RCTs) to accelerate systematic reviews (SRs). However, their use has been limited due to concerns about their performance and practical benefits. We developed a high-recall ensemble learning model using Cochrane RCT data to enhance the identification of RCTs for rapid title and abstract screening in SRs and evaluated the model externally with our annotated RCT datasets. Additionally, we assessed the practical impact in terms of labour time savings and recall improvement under two scenarios: ML-assisted double screening (where ML and one reviewer screened all citations in parallel) and ML-assisted stepwise screening (where ML flagged all potential RCTs, and at least two reviewers subsequently filtered the flagged citations). Our model achieved twice the precision compared to the existing SVM model while maintaining a recall of 0.99 in both internal and external tests. In a practical evaluation with ML-assisted double screening, our model led to significant labour time savings (average 45.4%) and improved recall (average 0.998 compared to 0.919 for a single reviewer). In ML-assisted stepwise screening, the model performed similarly to standard manual screening but with average labour time savings of 74.4%. In conclusion, compared with existing methods, the proposed model can reduce workload while maintaining comparable recall when identifying RCTs during the title and abstract screening stages, thereby accelerating SRs. We propose practical recommendations to effectively apply ML-assisted manual screening when conducting SRs, depending on reviewer availability (ML-assisted double screening) or time constraints (ML-assisted stepwise screening).

The betatron radiation source features a micrometer-scale source size, a femtosecond-scale pulse duration, milliradian-level divergence angles and a broad spectrum exceeding tens of keV. It is conducive to the high-contrast imaging of minute structures and for investigating interdisciplinary ultrafast processes. In this study, we present a betatron X-ray source derived from a high-charge, high-energy electron beam through a laser wakefield accelerator driven by the 1 PW/0.1 Hz laser system at the Shanghai Superintense Ultrafast Laser Facility (SULF). The critical energy of the betatron X-ray source is 22 ± 5 keV. The maximum X-ray flux reaches up to 4 × 109 photons for each shot in the spectral range of 5–30 keV. Correspondingly, the experiment demonstrates a peak brightness of 1.0 × 1023 photons·s−1·mm−2·mrad−2·0.1%BW−1, comparable to those demonstrated by third-generation synchrotron light sources. In addition, the imaging capability of the betatron X-ray source is validated. This study lays the foundation for future imaging applications.

Soft robots show an advantage when conducting tasks in complex environments due to their enormous flexibility and adaptability. However, soft robots suffer interactions and nonlinear deformation when interacting with soft and fluid materials. The reason behind is the free boundary interactions, which refers to undetermined contact between soft materials, specifically containing nonlinear deformation in air and nonlinear interactions in fluid for soft robot simulation. Therefore, we propose a new approach using material point method (MPM), which can solve the free boundary interactions problem, to simulate soft robots under such environments. The proposed approach can autonomously predict the flexible and versatile behaviors of soft robots. Our approach entails incorporating automatic differentiation into the algorithm of MPM to simplify the computation and implement an efficient implicit time integration algorithm. We perform two groups of experiments with an ordinary pneumatic soft finger in different free boundary interactions. The results indicate that it is possible to simulate soft robots with nonlinear interactions and deformation, and such environmental effects on soft robots can be restored.

Using $L^2$-methods, we prove a vanishing theorem for tame harmonic bundles over quasi-compact Kähler manifolds in a very general setting. As a special case, we give a completely new proof of the Kodaira-type vanishing theorems for Higgs bundles due to Arapura. To prove our vanishing theorem, we construct a fine resolution of the Dolbeault complex for tame harmonic bundles via the complex of sheaves of $L^2$-forms, and we establish the Hörmander $L^2$-estimate and solve $(\bar {\partial }_E+\theta )$-equations for Higgs bundles $(E,\theta )$.

As an important component of prehistoric subsistence, an understanding of bone-working is essential for interpreting the evolution of early complex societies, yet worked bones are rarely systematically collected in China. Here, the authors apply multiple analytical methods to worked bones from the Longshan site of Pingliangtai, in central China, showing that Neolithic bone-working in this area, with cervid as the main raw material, was mature but localised, household-based and self-sufficient. The introduction of cattle in the Late Neolithic precipitated a shift in bone-working traditions but it was only later, in the Bronze Age, that cattle bones were utilised in a specialised fashion and dedicated bone-working industries emerged in urban centres.

The laboratory generation and diagnosis of uniform near-critical-density (NCD) plasmas play critical roles in various studies and applications, such as fusion science, high energy density physics, astrophysics as well as relativistic electron beam generation. Here we successfully generated the quasistatic NCD plasma sample by heating a low-density tri-cellulose acetate (TCA) foam with the high-power-laser-driven hohlraum radiation. The temperature of the hohlraum is determined to be 20 eV by analyzing the spectra obtained with the transmission grating spectrometer. The single-order diffraction grating was employed to eliminate the high-order disturbance. The temperature of the heated foam is determined to be T = 16.8 ± 1.1 eV by analyzing the high-resolution spectra obtained with a flat-field grating spectrometer. The electron density of the heated foam is about $N_e=4.0\pm 0.3\times {10}^{20}{\text{cm}}^{-3}$ under the reasonable assumption of constant mass density.

In preparation for an experiment with a laser-generated intense proton beam at the Laser Fusion Research Center at Mianyang to investigate the 11B(p,α)2α reaction, we performed a measurement at very low proton energy between 140 keV and 172 keV using the high-voltage platform at the Institute of Modern Physics, Lanzhou. The aim of the experiment was to test the ability to use CR-39 track detectors for cross-section measurements and to remeasure the cross-section of this reaction close to the first resonance using the thick target approach. We obtained the cross-section σ = 45.6 ± 12.5 mb near 156 keV. Our result confirms the feasibility of CR-39 type track detector for nuclear reaction measurement also in low-energy regions.

Montmorillonite (Mnt)-based solid acids have a wide range of applications in catalysis and adsorption of pollutants. For such solid acids, the acidic characteristic often plays a significant role in these applications. The objective of the current study was to examine the effects of H3PO4-activation and supporting WO3 on the textural structure and surface acidic properties of Mnt. The Mnt-based solid acid materials were prepared by H3PO4 treatment and an impregnation method with a solution of ammonium metatungstate (AMT) and were examined as catalysts in the dehydration of glycerol to acrolein. The catalysts were characterized by nitrogen adsorption-desorption, powder X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, scanning electronic microscopy (SEM), X-ray photoelectron spectroscopy (XPS), diffuse reflectance ultraviolet-visible (DR UV-Vis) spectroscopy, temperature programmed desorption of NH3 (NH3-TPD), diffuse reflectance Fourier-transform infrared (DR FTIR) spectroscopy of adsorbed pyridine, and thermogravimetric (TG) analyses. The phosphoric acid treatment of Mnt created Brönsted and Lewis acid sites and led to increases in specific surface areas, porosity, and acidity. WO3 species influenced total acidity, acid strength, the numbers of Brönsted and Lewis acid sites, and catalytic performances. A high turnover frequency (TOF) value (31.2 h−1) based on a maximal 60.7% yield of acrolein was reached. The correlation of acrolein yield with acidic properties indicated that the cooperative role of Brönsted and Lewis acid sites was beneficial to the formation of acrolein and a little coke deposition (<3.3 wt.%). This work provides a new idea for the design of solid acid catalysts with cooperative Brönsted and Lewis acidity for the dehydration of glycerol.

Using data on nearly 20,000 restaurants in China during the COVID-19 outbreak, we find evidence that the government-sponsored rent reduction program reduced debt overhang problems. Rent reductions, which averaged 36,000 RMB per restaurant, increase the open rate of restaurants by 3.7%, revenue by 11,000 RMB, and the number of employees by 0.36. Larger restaurants with higher committed costs benefit more from the rent reduction. The stimulus has a positive spillover effect that boosts the revenue of restaurants in the immediate vicinity of subsidized restaurants. The treatment effect varies with organizational structure in a manner consistent with an information frictions hypothesis.

We conducted the first detailed mineral magnetic investigation of more than nine loess–paleosol couplets of the composite Titel-Stari Slankamen loess section in Serbia, which provides one of the longest and most complete terrestrial record of paleoclimatic changes in Europe since ~1.0 Ma. The results show that the ferrimagnetic mineral assemblage of the loess units is dominated by partially oxidized multidomain (MD) and pseudo-single domain (PSD) magnetite; however, with an increasing degree of pedogenesis, the eolian contribution is gradually masked by pedogenic superparamagnetic(SP) and single-domain (SD) ferrimagnets (mainly maghemite). The overall consistency of ferrimagnetic grain-size parameters indicates an absence of dissolution of the fine-grained ferrimagnetic fraction despite changes in climate regime over the past 1.0 Ma. The variations of normalized dJ/dT@120K and normalized χheating@530°C reflect a long-term stepwise increase in aridity during glacials with a major step at ~0.6–0.5 Ma, over the last 1.0 Ma. Overall, the results provide an improved basis for the future use of the magnetic properties of Serbian loess deposits for paleoclimatic reconstruction.

The origins of metal coinage and the monetisation of ancient economies have long been a research focus in both archaeology and economic history. Recent excavations of an Eastern Zhou period (c. 770–220 BC) bronze foundry at Guanzhuang in Henan Province, China, have yielded clay moulds for casting spade coins. The technical characteristics of the moulds demonstrate that the site functioned as a mint for producing standardised coins. Systematic AMS radiocarbon-dating indicates that well-organised minting developed c. 640–550 BC, making Guanzhuang the world's oldest-known, securely dated minting site. This discovery provides important new data for exploring the origin of monetisation in ancient China.

The aeolian loess-paleosol sequences in the Chinese Loess Plateau (CLP) are an excellent archive of variations in atmospheric circulation in the geological past. However, there is no consensus regarding the roles of the East Asian winter monsoon and westerly winds in transporting the dust responsible for loess deposition during glacial and interstadial periods. We conducted detailed measurements of the anisotropy of magnetic susceptibility (AMS) on two parallel loess profiles covering the most recent 130 ka in the western CLP to determine paleowind directions. Results show that the magnetic lineations of the loess and paleosol units in both sections are significantly clustered along the northwest to southeast direction. These observations demonstrate that the prevailing wind system responsible for dust transport in the western CLP was the northwesterly winter monsoon, rather than the westerly winds. The AMS-derived dust-bearing wind direction was relatively stable during the last glacial and interglacial cycle in the western CLP, consistent with sedimentary and AMS evidence from the eastern CLP. Accordingly, it is reasonable to conclude that large areas of deserts and Gobi deserts areas located in the upwind direction were the dominant sources for the aeolian deposits of the Loess Plateau.

Essential tremor (ET) is a neurological movement disorder characterised by bilateral limb kinetic/postural tremor, with or without tremor in other body parts including head, voice and lower limbs. Since no causative genes for ET have been identified, it is likely that the disorder occurs as a result of complex genetic factors interacting with various cellular and environmental factors that can result in abnormal function of circuitry involving the cerebello–thalamo–cortical pathway. Genetic analyses have uncovered at least 14 loci and 11 genes that are related to ET, as well as various risk or protective genetic factors. Limitations in ET genetic analyses include inconsistent disease definition, small sample size, varied ethnic backgrounds and many other factors that may contribute to paucity of relevant genetic data in ET. Genetic analyses, coupled with functional and animal studies, have led to better insights into possible pathogenic mechanisms underlying ET. These genetic studies may guide the future development of genetic testing and counselling, and specific, pathogenesis-targeted, therapeutic strategies.