A comprehensive direct numerical simulation of electroconvection (EC) turbulence caused by strong unipolar charge injection in a two-dimensional cavity is performed. The EC turbulence has strong fluctuations and intermittency in the closed cavity. Several dominant large-scale structures are found, including two vertical main rolls and a single primary roll. The flow mode significantly influences the charge transport efficiency. A nearly $Ne \sim T^{1/2}$ scaling stage is observed, and the optimal $Ne$ increment is related to the mode with two vertical rolls, while the single roll mode decreases the charge transport efficiency. As the flow strength increases, EC turbulence transitions from an electric force-dominated mode to an inertia-dominated mode. The former utilizes the Coulomb force more effectively and allocates more energy to convection. The vertical mean profiles of charge, electric field and energy budget provide intuitive information on the spatial energy distribution. With the aid of the energy-box technique, a detailed energy transport evolution is illustrated with changing electric Rayleigh numbers. This exploration of EC turbulence can help explain more complicated electrokinetic turbulence mechanisms and the successful utilization of Fourier mode decomposition and energy-box techniques is expected to benefit future EC studies.

We numerically investigated the global linear instability and bifurcations in electro-thermo-convection (ETC) of a dielectric liquid confined in a two-dimensional (2-D) concentric annulus subjected to a strong unipolar injection. Seven kinds of solutions exist in this ETC system due to the complex bifurcations, i.e. saddle-node, subcritical and supercritical Hopf bifurcations. These bifurcation routes constitute at most four solution branches. Global linear instability analysis and energy analysis were conducted to explain the instability mechanism and transition of different solutions and to predict the local instability regions. The linearized lattice Boltzmann method (LLBM) for global linear instability analysis, first proposed by Pérez et al. (Theor. Comput. Fluid Dyn., vol. 31, 2017, pp. 643–664) to analyse incompressible flows, was extended here to solve the whole set of coupled linear equations, including the linear Navier–Stokes equations, the linear energy equation, Poisson's equation and the linear charge conservation equation. A multiscale analysis was also performed to recover the macroscopic linearized Navier–Stokes equations from the four different discrete lattice Boltzmann equations (LBEs). The LLBM was validated by calculating the linear critical value of 2-D natural convection; it has an error of 1.39% compared with the spectral method. Instability with global travelling wave behaviour is a unique behaviour in the annulus configuration electrothermohydrodynamic system, which may be caused by the baroclinity. Finally, the chaotic behaviour was quantitatively analysed through calculation of the fractal dimension and Lyapunov exponent.

Modal global linear stability analysis of thermal convection is performed with the linearized lattice Boltzmann method (LLBM). The onset of Rayleigh–Bénard convection in rectangular cavities with conducting and adiabatic sidewalls and the instability of two-dimensional (2-D) and three-dimensional (3-D) natural convection in cavities are studied. The method of linearizing the local equilibrium probability distribution function that was first proposed by Pérez et al. (Theor. Comp. Fluid Dyn., vol. 31, 2017, pp. 643–664) is extended to solve the coupled linear Navier–Stokes equations together with the linear energy equation in this work. A multiscale analysis is also performed to recover the macroscopic linear Navier–Stokes equations from the discrete lattice Boltzmann equations for both the single and multiple relaxation time models. The present LLBM is implemented in the framework of the Palabos library. It is validated by calculating the linear critical value of 2-D natural convection that the LLBM with the multiple relaxation time model has an error less than 1 % compared with the spectral method. The instability mechanism of the flow is explained by kinetic energy transfer analysis. It is shown that the buoyancy mechanism and inertial mechanism tend to stabilize the Hopf bifurcation of the 2-D natural convection at Pr < 0.08 and Pr > 1, respectively. For 3-D natural convection, subcritical bifurcation of the Hopf type is found for low-Prandtl-number fluids (Pr < 0.1).

The subduction model of the Neo-Tethys during the Early Cretaceous has always been a controversial topic, and the scarcity of Early Cretaceous magmatic rocks in the southern part of the Gangdese batholith is the main cause of this debate. To address this issue, this article presents new zircon U–Pb chronology, zircon Hf isotope, whole-rock geochemistry and Sr–Nd isotope data for the Early Cretaceous quartz diorite dykes with adakite affinity in Liuqiong, Gongga. Zircon U–Pb dating of three samples yielded ages of c. 141–137 Ma, indicating that the Liuqiong quartz diorite was emplaced in the Early Cretaceous. The whole-rock geochemical analysis shows that the Liuqiong quartz diorite is enriched in large-ion lithophile elements (LILEs) and light rare-earth elements (LREEs) and is depleted in high-field-strength elements (HFSEs), which are related to slab subduction. Additionally, the Liuqiong quartz diorite has high SiO2, Al2O3 and Sr contents, high Sr/Y ratios and low heavy rare-earth element (HREE) and Y contents, which are compatible with typical adakite signatures. The initial 87Sr/86Sr values of the Liuqiong adakite range from 0.705617 to 0.705853, and the whole-rock ϵNd(t) values vary between +5.78 and +6.24. The zircon ϵHf(t) values vary from +11.5 to +16.4. Our results show that the Liuqiong adakite magma was derived from partial melting of the Neo-Tethyan oceanic plate (mid-ocean ridge basalt (MORB) + sediment + fluid), with some degree of subsequent peridotite interaction within the overlying mantle wedge. Combining regional data, we favour the interpretation that the Neo-Tethyan oceanic crust was subducted at a low angle beneath the Gangdese during the Early Cretaceous.

The wheat aphid Sitobion miscanthi (CWA) is an important harmful pest in wheat fields. Insecticide application is the main method to effectively control wheat aphids. However, CWA has developed resistance to some insecticides due to its extensive application, and understanding resistance mechanisms is crucial for the management of CWA. In our study, a new P450 gene, CYP4CJ6, was identified from CWA and showed a positive response to imidacloprid and thiamethoxam. Transcription of CYP4CJ6 was significantly induced by both imidacloprid and thiamethoxam, and overexpression of CYP4CJ6 in the imidacloprid-resistant strain was also observed. The sensitivity of CWA to these two insecticides was increased after the knockdown of CYP4CJ6. These results indicated that CYP4CJ6 could be associated with CWA resistance to imidacloprid and thiamethoxam. Subsequently, the posttranscriptional regulatory mechanism was assessed, and miR-316 was confirmed to participate in the posttranscriptional regulation of CYP4CJ6. These results are crucial for clarifying the roles of P450 in the resistance of CWA to insecticides.

We propose a novel Fabry–Pérot (FP) antenna consisting of a checkered polarization-conversion metasurface (PCM), corner-cut square patch antennas, and sandwiched compounds. The proposed antenna achieves low radar-cross-section (RCS), high gain, and wideband circular polarization (CP). The corner-cut square patch antennas facilitate high reflectivity, satisfactory transmission magnitude, and the desired phase difference. An embedded metal between two rings of substrate contributes to reducing cross-polarization, improving transmission efficiency, enhancing bandwidth, and reducing RCS. Following simulations, we fabricated a prototype of the proposed antenna and tested its performance. Measurements from the simulation and prototype tests were similar within a reasonable margin of error. Compared with alternative antennas, our proposed FP antenna offers high gain, wideband CP, low cost, a low RCS, and a lower profile.

In order to maximize the utility of future studies of trilobite ontogeny, we propose a set of standard practices that relate to the collection, nomenclature, description, depiction, and interpretation of ontogenetic series inferred from articulated specimens belonging to individual species. In some cases, these suggestions may also apply to ontogenetic studies of other fossilized taxa.

A series of new synthetic armored cables were developed and tested to ensure that they were suitable for use with the RECoverable Autonomous Sonde (RECAS), which is a newly designed freezing-in thermal ice probe. The final version of the cable consists of two concentric conductors that can be used as the power and signal lines. Two polyfluoroalkoxy jackets are used for electrical insulation (one for insulation between conductors, and the other for insulation of the outer conductor). The outer insulation layer is coated by polyurethane jacket to seal the connections between the cable and electrical units. The 0.65 mm thick strength member is made from aramid fibers woven together. To hold these aramid fibers in place, a sheathing layer was produced from a polyamide fabric cover net. The outer diameter of the final version of the cable is ~6.1 mm. The permissible bending radius is as low as 17–20 mm. The maximal breaking force under straight tension is ~12.2 kN. The cable weight is only ~0.061 kg m−1. The mechanical and electrical properties and environmental suitability of the cable were determined through laboratory testing and joint testing with the probe.

From 21 January 2020 to 9 February 2020, three family clusters involving 31 patients with coronavirus disease 2019 were identified in Wenzhou, China. The epidemiological and clinical characteristics of the family cluster patients were analysed and compared with those of 43 contemporaneous sporadic cases. The three index cases transmitted the infection to 28 family members 2–10 days before illness onset. Overall, 28 of the 41 sporadic cases and three of 31 patients in the family clusters came back from Wuhan (65.12 vs. 9.68%, P< 0.001). In terms of epidemiological characters and clinical symptoms, no significant differences were observed between the family cluster and sporadic cases. However, the lymphocyte counts of sporadic cases were significantly lower than those of family cluster cases ((1.32 ± 0.55) × 109/l vs. (1.63 ± 0.70) × 109/l, P = 0.037), and the proportion of hypoalbuminaemia was higher in sporadic cases (18/43, 41.86%) than in the family clusters (6/31, 19.35%) (P < 0.05). Within the family cluster, the second- and third-generation cases had milder clinical manifestations, without severe conditions, compared with the index and first-generation cases, indicating that the virulence gradually decreased following passage through generations within the family clusters. Close surveillance, timely recognition and isolation of the suspected or latent patient is crucial in preventing family cluster infection.

A 15-year-old teenager presented with a 2-month history of headache. Neurological examination was normal except for papilledema. Further lumbar puncture indicated intracranial hypertension (330 mm H2O). Brain magnetic resonance imaging (MRI) was normal but phase contrast-magnetic resonance venography (PC-MRV) (Figure 1(A)) suggested possible left transverse-sigmoid sinus thrombosis; subsequent contrast-enhanced 3D fat-saturated T1 volumetric isotropic turbo spin echo acquisition (VISTA) MRI (Figure 1(B)) confirmed the pathology. Hyper-coagulable panel results (including six steroid sex hormones, antithrombin III, protein C, protein S, lupus anticoagulant, and anticardiolipin antibodies) were all within normal range. In further examination, computed tomography (CT) venography images (Figure 1(C) and (D)) showed that the left jugular vein was compressed by the styloid process, consistent with Eagle syndrome.1 The patient who refused the recommended surgical treatment, however, chose anticoagulant therapy consisting of low-molecular weight heparin subcutaneous injection in addition to new oral anticoagulant. At 18-month follow-up, the patient reported no symptoms remained.

As distinctive spontaneous polarization and far-infrared radiation characteristics, the natural mineral tourmaline (TM) has the regulatory effect on crystallization behavior, which possesses potential application in biomimetic mineralization and bone regeneration. In this study, polyurethane (PU) and gelatin (GE) membranes with different adding proportion of TM nanoparticles were prepared via electrospinning. Additionally, the effect of TM nanoparticles on the mineralization process of hydrophobic PU and hydrophilic GE was investigated by immersing the composite TM/PU and TM/GE electrospun membranes in the 10× simulated body fluid (10SBF) at 37 °C for varying periods of time. SEM images confirmed the well-dispersed TM nanoparticles in the PU and GE electrospun fibers. The mineralization deposition was characterized by the SEM, EDS, XRD, and FTIR, and it indicated that two types of calcium phosphate deposits with different Ca/P molar ratios were obtained when TM/PU membranes and TM/GE membranes were incubated in 10SBF. Honeycomb-like hydroxyapatite crystals nucleated and grew faster on TM/PU and TM/GE membranes than the pure PU and GE membranes, respectively. Furthermore, with the increase of the added TM nanoparticles in the composite membranes, more calcium phosphate crystals were precipitated. These results showed that the added TM nanoparticles were able to improve the mineralization of polymer fibrous membranes, which is potential for the composite bone scaffold.

Direct determination of barrier height (ΦBH) value between Ir and single crystal (001) hydrogen-terminated diamond with lightly boron doped has been performed using x-ray photoelectron spectroscopy technique. 70 nm Ir islands were formed on hydrogen-terminated diamond surface using anodic aluminum oxide. The ΦBH value for Ir/hydrogen-terminated diamond was −0.43 ± 0.14 eV, indicating that Ir was a suitable metal for ohmic contact with hydrogen-terminated diamond. The band diagram of Ir/hydrogen-terminated diamond was obtained. The experimental ΦBH was compared with the theoretical ΦBH in this work.

The following paper investigates the prevalence and characteristics of asymptomatic norovirus infection in the population living around oyster farm sites. Two consecutive surveys were conducted from January 2014 to December 2014 and 4549 stool samples were screened during the same time period. The total asymptomatic infection rate was 4.04% (184/4549). Norovirus infection rate was 5.20% in oyster farming population which was significantly higher compared with non-farming population where the infection rate was 3.65% (χ2 = 5.49, P < 0.05). A total of 184 NoV positive samples were identified by real time-quantitative polymerase chain reaction (RT-qPCR) and semi-nested RT-PCR and 136 sequences were obtained. The sequences were clustered into 14 genotypes. GI strains were clustered into six genotypes, including GI.2, GI.3, GI.5, GI.6, GI.8 and GI.9; while GII strains were clustered into GII.2, GII.3, GII.4, GII.5, GII.6, GII.8 and GII.13. GI.9 and GII.17 were the predominant and most prevalent genotypes, respectively. The GII.17 genotype replaced GII.4 becoming the dominant genotype in the oyster farming area in 2014. To sum up, long-term monitoring of asymptomatic infection is crucial for the detection of new variant strains and for identifying outbreaks during the early stage.

To produce pulses with good flat-top quality, pulse-forming lines (PFLs) have been widely used in the field of Tesla-type pulse generators. To shorten the physical length of the PFL, a double-width PFL (DWPFL) is proposed that doubles the output pulse width while maintaining flat-top quality. A repetitively 10 GW Tesla-type long-pulse generator producing pulses with flat-top width of about 110 ns was developed with a coaxial DWPFL to produce high-current electron beams. Electron beams of about 10 GW with flat-top widths of about 110 ns were obtained on a planar vacuum diode load. With this pulse generator and a C-band high-power microwave system, microwaves of ~2.2 GW power and full-width at half-maximum of 101 ns were generated. The experiment demonstrates the feasibility and ideal output waveform quality of the DWPFL.

In this work, the reduction mechanism of potassium chromate (K2CrO4) was investigated via in situ high-temperature X-ray diffraction coupled with Fourier transform infrared spectroscopy. During the hydrogen reduction of K2CrO4, the formation of K3CrO4, KCrO2, and Kx CrO2 were detected for the first time. The study discovered that K2CrO4 was firstly reduced to K3CrO4 and an amorphous Cr(III) intermediate product at low temperature (400–500 °C). Moreover, the K3CrO4 was the only crystalline material at this stage. As the temperature increased, a stabilized amorphous CrOOH was formed. At a high temperature (550–700 °C), KCrO2 was generated. Interestingly, a portion of KCrO2 was spontaneously decomposed during the hydrogen reduction, accompanying by the formation of K0.7CrO2. Finally, the results clearly illustrated the reduction mechanism of K2CrO4: K2CrO4 → K3CrO4 → amorphous intermediate → KCrO2.