Let $\mathcal {D}$ be a Hom-finite, Krull-Schmidt, 2-Calabi-Yau triangulated category with a rigid object R. Let $\Lambda =\operatorname {End}_{\mathcal {D}}R$ be the endomorphism algebra of R. We introduce the notion of mutation of maximal rigid objects in the two-term subcategory $R\ast R[1]$ via exchange triangles, which is shown to be compatible with the mutation of support $\tau $-tilting $\Lambda $-modules. In the case that $\mathcal {D}$ is the cluster category arising from a punctured marked surface, it is shown that the graph of mutations of support $\tau $-tilting $\Lambda $-modules is isomorphic to the graph of flips of certain collections of tagged arcs on the surface, which is moreover proved to be connected. Consequently, the mutation graph of support $\tau $-tilting modules over a skew-gentle algebra is connected. This generalizes one main result in [49].

The study aims were to present in vitro susceptibilities of clinical isolates from Gram-negative bacteria bloodstream infections (GNBSI) collected in China. GNBSI isolates were collected from 18 tertiary hospitals in 7 regions of China from 2018 to 2020. Minimum inhibitory concentrations were assessed using a Trek Diagnostic System. Susceptibility was determined using CLSI broth microdilution, and breakpoints were interpreted using CLSI M100 (2021). A total of 1,815 GNBSI strains were collected, with E. coli (42.4%) and Klebsiella pneumoniae (28.6%) being the most prevalent species, followed by P. aeruginosa (6.7%). Susceptibility analyses revealed low susceptibilities (<40%) of ESBL-producing E. coli and K. pneumonia to third-/fourth-generation cephalosporins, monobactamases, and fluoroquinolones. High susceptibilities to colistin (95.0%) and amikacin (81.3%) were found for K. pneumoniae, while Acinetobacter baumannii exhibited a high susceptibility (99.2%) to colistin but a low susceptibility to other antimicrobials (<27.5%). Isolates from ICUs displayed lower drug susceptibility rates of K. pneumoniae and A. baumannii than isolates from non-ICUs (all P < 0.05). Carbapenem-resistant and ESBL-producing K. pneumoniae detection was different across regions (both P < 0.05). E. coli and K. pneumoniae were major contributors to GNBSI, while A. baumannii exhibited severe drug resistance in isolates obtained from ICU departments.

The migration of Mongolian gazelles (Procapra gutturosa) poses a potential risk of outbreak for zoonotic intestinal protozoan parasite infections. This study aims to investigate the infection status of zoonotic intestinal protozoan parasites in these migratory Mongolian gazelles. We collected 120 fecal samples from Mongolian gazelles during their migration from Mongolia to China in December 2023. These samples were analysed using amplification and sequencing of partial SSU rRNA genes to detect the 4 presence of zoonotic intestinal protozoan parasites and characterize their genotypes. Our analysis revealed the presence of several zoonotic intestinal protozoan parasites in the sampled Mongolian gazelles. Cryptosporidium spp. was detected in 14.17% (17/120) of the samples, followed by Cystoisospora belli in 13.33% (16/120), Blastocystis sp. in 16.67% (20/120) and Cyclospora cayetanensis in 30.00% (36/120). Moreover, we identified novel host-adapted genotypes of Cryptosporidium spp. and C. belli, as well as the presence of ST2 and ST13 Blastocystis sp. subtypes, while distinct genotypes were found in Blastocystis sp. and C. cayetanensis. This study revealed the status of 4 prevalent zoonotic intestinal protozoan parasite infections in Mongolian gazelles and provided crucial insights into their characteristics. The prevalence of these parasites in the population highlights the potential risk of cross-border transmission of infectious diseases associated with long-distance migration. Furthermore, the identification of novel genotypes contributes to our understanding of the genetic diversity and adaptation of these parasites. These findings can inform the development of protective measures to mitigate the impact of these infections on the health and survival of Mongolian gazelles.

Accurately converting satellite instantaneous evapotranspiration (λETi) over time to daily evapotranspiration (λETd) is crucial for estimating regional evapotranspiration from remote sensing satellites, which plays an important role in effective water resource management. In this study, four upscaling methods based on the principle of energy balance, including the evaporative fraction method (Eva-f method), revised evaporative fraction method (R-Eva-f method), crop coefficient method (Kc-ET0 method) and direct canopy resistance method (Direct-rc method), were validated based on the measured data of the Bowen ratio energy balance system (BREB) in maize fields in northwestern (NW) and northeastern (NE) China (semi-arid and semi-humid continental climate regions) from 2021 to 2023. Results indicated that Eva-f and R-Eva-f methods were superior to Kc-ET0 and Direct-rc methods in both climatic regions and performed better between 10:00 and 11:00, with mean absolute errors (MAE) and coefficient of efficiency (ɛ) reaching <10 W/m2 and > 0.91, respectively. Comprehensive evaluation of the optimal upscaling time using global performance indicators (GPI) showed that the Eva-f method had the highest GPI of 0.59 at 12:00 for the NW, while the R-Eva-f method had the highest GPI of 1.18 at 11:00 for the NE. As a result, the Eva-f approach is recommended as the best way for upscaling evapotranspiration in NW, with 12:00 being the ideal upscaling time. The R-Eva-f method is the optimum upscaling method for the Northeast area, with an ideal upscaling time of 11:00. The comprehensive results of this study could be useful for converting λETi to λETd.

The AIMTB rapid test assay is an emerging test, which adopted a fluorescence immunochromatographic assay to measure interferon-γ (IFN-γ) production following stimulation of effector memory T cells in whole blood by mycobacterial proteins. The aim of this article was to explore the ability of AIMTB rapid test assay in detecting Mycobacterium tuberculosis (MTB) infection compared with the widely applied QuantiFERON-TB Gold Plus (QFT-Plus) test among rural doctors in China. In total, 511 participants were included in the survey. The concordance between the QFT-Plus test and the AIMTB rapid test assay was 94.47% with a Cohen’s kappa coefficient (κ) of 0.84 (95% CI, 0.79–0.90). Improved concordance between the two tests was observed in males and in participants with 26 or more years of service as rural doctors. The quantitative values of the QFT-Plus test was higher in individuals with a result of QFT-Plus-/AIMTB+ as compared to those with a result of QFT-Plus-/AIMTB- (p < 0.001). Overall, our study found that there was an excellent consistency between the AIMTB rapid test assay and the QFT-Plus test in a Chinese population. As the AIMTB rapid test assay is fast and easy to operate, it has the potential to improve latent tuberculosis infection testing and treatment at the community level in resource-limited settings.

Imitation from Observation (IfO) prompts the robot to imitate tasks from unlabeled videos via reinforcement learning (RL). The performance of the IfO algorithm depends on its ability to extract task-relevant representations since images are informative. Existing IfO algorithms extract image representations by using a simple encoding network or pre-trained network. Due to the lack of action labels, it is challenging to design a supervised task-relevant proxy task to train the simple encoding network. Representations extracted by a pre-trained network such as Resnet are often task-irrelevant. In this article, we propose a new approach for robot IfO via multimodal observations. Different modalities describe the same information from different sides, which can be used to design an unsupervised proxy task. Our approach contains two modules: the unsupervised cross-modal representation (UCMR) module and a self-behavioral cloning (self-BC)-based RL module. The UCMR module learns to extract task-relevant representations via a multimodal unsupervised proxy task. The Self-BC for further offline policy optimization collects successful experiences during the RL training. We evaluate our approach on the real robot pouring water task, quantitative pouring task, and pouring sand task. The robot achieves state-of-the-art performance.

Understanding settling motion of coral grains is important in terms of protection of coral reef systems and resotoration of the associated ecosystems. In this paper, a series of laboratory experiments was conducted to investigate the settling motion, using optical microscopy to measure shape parameters of coral grains and the particle-filtering-based object tracking to reconstruct the three-dimensional trajectory. Three characteristic descent regimes, namely, tumbling, chaotic and fluttering, are classified based on the three-dimensional trajectory, the spiral radius variation and the velocity spectrum. It is demonstrated that if one randomly picks up one coral grain, then the probabilities of occurrence of the three regimes are approximately $26\,\%$, $42\,\%$ and $32\,\%$, respectively. We have shown that first, the dimensionless settling velocity generally increases with the non-dimensional diameter and Corey shape factor and second, the drag coefficient generally decreases with the Reynolds number and Corey shape factor. Based on this, the applicability of existing models on predicting settling velocity and drag coefficient for coral grains is demonstrated further. Finally, we have proposed extended models for predicting the settling velocity. This study contributes to better understanding of settling motion and improves our predictive capacity of settling velocity for coral grains with complex geometry.

The global transition towards diets high in calories has contributed to 2.1 billion people becoming overweight, or obese, which damages male reproduction and harms offspring. Recently, more and more studies have shown that paternal exposure to stress closely affects the health of offspring in an intergenerational and transgenerational way. SET Domain Containing 2 (SETD2), a key epigenetic gene, is highly conserved among species, is a crucial methyltransferase for converting histone 3 lysine 36 dimethylation (H3K36me2) into histone 3 lysine 36 trimethylation (H3K36me3), and plays an important regulator in the response to stress. In this study, we compared patterns of SETD2 expression and the H3K36me3 pattern in pre-implantation embryos derived from normal or obese mice induced by high diet. The results showed that SETD2 mRNA was significantly higher in the high-fat diet (HFD) group than the control diet (CD) group at the 2-cell, 4-cell, 8-cell, and 16-cell stages, and at the morula and blastocyst stages. The relative levels of H3K36me3 in the HFD group at the 2-cell, 4-cell, 8-cell, 16-cell, morula stage, and blastocyst stage were significantly higher than in the CD group. These results indicated that dietary changes in parental generation (F0) male mice fed a HFD were traceable in SETD2/H3K36me3 in embryos, and that a paternal high-fat diet brings about adverse effects for offspring that might be related to SETD2/H3K36me3, which throws new light on the effect of paternal obesity on offspring from an epigenetic perspective.

Direct numerical simulations are performed to explore the effects of the rotating direction of the vertically asymmetric rough wall on the transport properties of Taylor–Couette (TC) flow, up to a Taylor number of ${Ta} = 2.39\times 10^{7}$. It is shown that, compared with the smooth wall, the rough wall with vertical asymmetric strips can enhance the dimensionless torque ${Nu}_{\omega }$. More importantly, at high Ta, clockwise rotation of the inner rough wall (where the fluid is sheared by the steeper slope side of the strips) results in a significantly greater torque enhancement compared to counter-clockwise rotation (where the fluid is sheared by the smaller slope side of the strips), due to the larger convective contribution to the angular velocity flux. However, the rotating direction has a negligible effect on the torque at low Ta. The larger torque enhancement caused by the clockwise rotation of the vertically asymmetric rough wall at high Ta is then explained by the stronger coupling between the rough wall and the bulk, attributed to the larger biased azimuthal velocity towards the rough wall at the mid-gap of the TC system, the increased turbulence intensity manifested by larger Reynolds stress and a thinner boundary layer, and the more significant contribution of the pressure force on the surface of the rough wall to the torque.

Narrowband microwave generation with tuneable frequency is demonstrated by illuminating a photoconductive semiconductor switch (PCSS) with a burst-mode fibre laser. The whole system is composed of a high-power linearly polarized burst-mode pulsed fibre laser and a linear-state PCSS. To obtain a high-performance microwave signal, a desired envelope of burst is necessary and a pulse pre-compensation technique is adopted to avoid envelope distortion induced by the gain-saturation effect. Resulting from the technique, homogenous peak power distribution in each burst is ensured. The maximum energy of the laser burst pulse reaches 200 μJ with a burst duration of 100 ns at the average power of 10 W, corresponding to a peak power of 4 kW. When the PCSS is illuminated by the burst-mode fibre laser, narrowband microwave generation with tuneable frequency (0.80–1.12 GHz) is obtained with a power up to 300 W. To the best of the authors’ knowledge, it is the first demonstration of frequency-tuneable narrowband microwave generation based on a fibre laser. The high-power burst-mode fibre laser reported here has great potential for generating high-power arbitrary microwave signals for a great deal of applicable demands such as smart adaptive radar and intelligent high-power microwave systems.

Cable is the most important bearing structure of the cable-stayed bridges. Its safety has been of crucial public concern. Traditional manual cable inspection method has many defects such as low inspection efficiency, poor reliability and hazardous working environment. In this paper, a new wirelessly controlled cable-climbing robot enabling safe and convenient inspection of stay cables is proposed. The designed robot is composed of two modules, joined by four turnbuckles to form a closed structure that clasps the cable. The robot is controlled wirelessly by a ground-based station, and a DC power is supplied via an onboard lithium battery. The climbing principle and mechanical structure of this robot are introduced. The static model of the robot during obstacle negotiation is established. The relationships of the driving force and resistance with obstacle height to determine the obstacle-negotiation capability of the robot are obtained. The effects of cable diameter, cable inclination and preload force on obstacle climbing ability of the robot are also analyzed. The experiments verify that the robot could climb random inclined cables and overcome an obstacle of 2.42 mm in height with a mass of 5 kg payload.

Studies have indicated that psychological stress impairs human fertility and that various stressors can induce apoptosis of testicular cells. However, the mechanisms by which psychological stress on males reduces semen quality and stressors induce apoptosis in testicular cells are largely unclear. Using a psychological (restraint) stress mouse model, we tested whether male psychological stress triggers apoptosis of spermatozoa and spermatogenic cells through activating tumour necrosis factor (TNF)-α signalling. Wild-type or TNF-α−/− male mice were restrained for 48 h before examination for apoptosis and expression of TNF-α and TNF receptor 1 (TNFR1) in spermatozoa, epididymis, seminiferous tubules and spermatogenic cells. The results showed that male restraint significantly decreased fertilization rate and mitochondrial membrane potential, while increasing levels of malondialdehyde, active caspase-3, TNF-α and TNFR1 in spermatozoa. Male restraint also increased apoptosis and expression of TNF-α and TNFR1 in caudae epididymides, seminiferous tubules and spermatogenic cells. Sperm quality was also significantly impaired when spermatozoa were recovered 35 days after male restraint. The restraint-induced damage to spermatozoa, epididymis and seminiferous tubules was significantly ameliorated in TNF-α−/− mice. Furthermore, incubation with soluble TNF-α significantly reduced sperm motility and fertilizing potential. Taken together, the results demonstrated that male psychological stress induces apoptosis in spermatozoa and spermatogenic cells through activating the TNF-α system and that the stress-induced apoptosis in spermatogenic cells can be translated into impaired quality in future spermatozoa.

A facile one-pot and environmentally friendly method was developed to synthesize multi-branched flowerlike gold (Au) nanostructures by reducing chlorate gold (HAuCl4) with hydrogen peroxide (H2O2) in the presence of sodium citrate. The multibranched Au nanostructures were characterized by transmission electron microscopy and Ultraviolet-visible (UV-vis) absorption spectroscopy. The molar ratio of sodium citrate to HAuCl4 and the concentrations of the reacted reagents play important roles in the formation of multibranched Au nanostructures. The multibranched Au nanostructures with sharp tips exhibit excellent surface-enhanced Raman scattering (SERS) ability of 4-aminothiophenol (PATP). The experimental and simulated results both confirm that the photoinduced catalytic coupling reaction of PATP transformation to 4,4′-dimercaptoazobenzene occurs on the surface of multibranched Au nanostructures at a high power during the SERS measurement. It is believed that these multibranched Au nanostructures may find potential applications in SERS, biosensors, and the photoinduced surface catalytic application fields.

Sterol regulatory element binding protein 1 (SREBP1) has a central regulatory effect on milk fat synthesis. Lipopolysaccharides (LPS) can induce mastitis and cause milk fat depression in cows. SREBP1 is also known to be associated with inflammatory regulation. Thus, in the current study, we hypothesized that LPS-induced milk fat depression in dairy cow mammary epithelial cells (DCMECs) operates via decreased SREBP1 expression and activity. To examine the hypothesis, DCMECs were isolated and purified from dairy cow mammary tissue and treated with LPS (10 µg/ml). LPS treatment of DCMECs suppressed lipid-metabolism-related transcription factor SREBP1 mRNA expression, nuclear translocation and protein expression, leading to reduced triglyceride content. The transcription levels of acetyl-CoA carboxylase-1 and fatty acid synthetase were significantly down-regulated in DCMECs after LPS treatment, suggesting that acetyl-CoA carboxylase-1 and fatty acid synthetase involved in de novo milk fat synthesis was regulated by SREBP1. In summary, these results suggest that LPS induces milk fat depression in dairy cow mammary epithelial cells via decreased expression of SREBP1 in a time-dependent manner.

To evaluate whether the photocatalysis efficiency of titanium oxide (TiO2) increases under the shading of carbon aerogel (CA), super black CA/TiO2 composite sheets were directly fabricated by physical mixing of CA, TiO2 powder, and binder. It was found that the photocatalysis efficiency of composite sheets were higher than that of pure TiO2 sheet. We attribute this phenomenon to the hot electrons coupling between CA and TiO2. Besides the direct light absorption of TiO2, the hot electrons generating and indirect energy transfer from CA to TiO2 may enhance the photocatalysis efficiency of TiO2.

Both internal factors (e.g., nonverbal intelligence) and external factors (e.g., input quantity) are claimed to affect the rate of children's vocabulary development. However, it remains an open question whether these variables work similarly on bilingual children's dual language learning. The current paper examined this issue on 805 Singapore children (4 years, 1 month to 5 years, 8 months) who are learning English (societal language) and an ethnic language (Mandarin/Malay/Tamil). Singapore is a bilingual society; however, there is an inclination for English use at home in recent years, resulting in a discrepancy of input between English and ethnic languages in many families. In this study, internal and external factors were examined comprehensively with standardized tests and a parental questionnaire. Regression analysis was used to address the questions. There were statistically significant differences in language input quantity, quality, and output between English and ethnic language learning environments. Singapore children are learning English in an input-rich setting while learning their ethnic language in a comparatively input-poor setting. Multiple regressions revealed that while both sets of factors explained lexical knowledge in each language, the relative contribution is different for English and ethnic languages: internal factors explained more variance in English language vocabulary, whereas external factors were more important in explaining ethnic language knowledge. We attribute this difference to a threshold effect of external factors based on the critical mass hypothesis and call for special attention to learning context (input-rich vs. input-poor settings) for specific bilingual language studies.

The Myanmar snub-nosed monkey Rhinopithecus strykeri was discovered in 2010 on the western slopes of the Gaoligong Mountains in the Irrawaddy River basin in Myanmar and subsequently in the same river basin in China, in 2011. Based on 2 years of surveying the remote and little disturbed forest of the Gaoligong Mountains National Nature Reserve in China, with outline transect sampling and infrared camera monitoring, a breeding group comprising > 70 individuals was found on the eastern slopes of the Gaoligong Mountains in the Salween River Basin. Given the Critically Endangered status of this primate (a total of < 950 individuals are estimated to remain in the wild), efforts to protect the relatively undisturbed habitat of this newly discovered population and to prevent hunting are essential for the long-term survival of this species.

Very high cycle bending fatigue behaviors of FV520B steel under fretting wear were studied by the ultrasonic fatigue technique. The specimen system for ultrasonic bending testing was designed and the stress distribution of fatigue specimen was obtained by finite element method. The microstructure of FV520B steel was characterized by means of optical microscope, transmission electron microscope, and energy-dispersive spectroscope. The P–S–N curve was drawn based on fatigue data. The micromorphology characteristics of fretting wear surface and fracture surface for fatigue specimen were observed. The results indicate that the microstructure of FV520B steel is mainly composed of lath martensite, ferrite, and precipitation particles, with some randomly distributed internal inclusions. The P–S–N curve shows that there exists no “conventional fatigue limit” and the fatigue life decreases continuously with the increase of applied stress Smax. Most of fatigue cracks are observed on fractography and initiate from the overlap region of fretting wear zone and stress concentration zone. The fracture failure for tested specimen is ascribed to fretting wear and bending vibration fatigue.

The present study evaluated the effects of dietary microbial phytase on the growth and gut health of hybrid tilapia (Oreochromis niloticus ♀×Oreochromis aureus ♂), focusing on the effect on intestinal histology, adhesive microbiota and expression of immune-related cytokine genes. Tilapia were fed either control diet or diet supplemented with microbial phytase (1000 U/kg). Each diet was randomly assigned to four groups of fish reared in cages (3×3×2 m). After 12 weeks of feeding, weight gain and feed conversion ratio of tilapia were not significantly improved by dietary microbial phytase supplementation. However, significantly higher level of P content in the scales, tighter and more regular intestinal mucosa folds were observed in the microbial phytase group and the microvilli density was significantly increased. The adhesive gut bacterial communities were strikingly altered by microbial phytase supplementation (0·41<similarity coefficient<0·54). Stimulated intestinal inflammation and stress status were observed in the fish fed diet supplemented with microbial phytase, as indicated by the up-regulated intestinal expressions of the cytokine genes (tnf-α and tgf-β) and hsp70. In addition, the gut microvilli height was significantly decreased in the phytase group. These results indicate that dietary microbial phytase may exert mixed effects on hybrid tilapia, and can guide our future selection of phytases as aquafeed additives – that is, eliminating those that can stimulate intestinal inflammation.

The microstructural evolution of spray-formed high speed steel during hot deformation was investigated as well as the effects of spray forming parameters on the porosity formation. Four distinct zones are identified in the as-deposited material, and interstitial porosity is present in the bottom and peripheral zones, while gas-related porosity is mainly found in the central zone. It can keep the porosity at a minimum value by using the optimum parameters, e.g., the average porosity of central zone is 3.7% for a superheat of 170 °C and a gas-to-metal flow rate of 0.7. During hot deformation at 1150 °C, the amount of porosity can be obviously decreased by increasing the height reduction which also plays a key role in breaking up eutectic carbides. The critical height reduction for the breakdown of the eutectic carbides is 50%, the dominant mechanism being mechanical fragmentation.